back plate Tenders in Delhi

1
Military Engineer Services - Delhi

37189771 repair / maintenance of internal electrification fitting / fixtures atsangli apartments, ahq camp lodhi road and new echs polyclinic area lodhi road under ge new delhi 1 taking down copper/aluminium point wiring ( fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,light fittingetc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed. 2 .m&l for point wiringwith pvc insulated unsheathedmulti strandedfrls type copper conductor cable of size 1.5 sqmm 1100 v grade including one run of pvc insulated unsheathed multi stranded frls type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including pvc concealed conduit 20 mm dia medium grade isi marked andits accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators complete all as specified and directed for the following : 3 one light/ceiling fan/exhaust fan point controlled by one way switch 5 amps. 4 one bell /buzzer point controlled by one bell push 5 one 3 pin 5 amps socket outlet point controlled by one way switch on independent board. 6 one 3 pin 5 amps socket outlet point controlled by one way switch on same board. 7 all as per item no 2 above but point wiring with 2.5 sqmmsingle core coppercable and earth continuity wire with 2.5 sqmm single core cable for one three pin 15 socket outlet point on independent board complete all as specified and directed by engineer in chargemake rr,polycab/havells. 8 m&l in cutting,making of hole in any type of wall suitable for fixing in exhaust fan size upto 250mm including making of good surfaces to wall and distrubed area compete all as specified and directed by engr in charge. 9 taking down of submain wiring including taking out conduit pipe of any description and of any size complete all as specified and directed by engineer in charge 10 s&f in replacement submain wiring alongwith earth wire with 2 run of 4 sqmm (main cable and neutral) and one run of 4 sqmm as earth wireof frls pvc insulated copper conductor, single core cable drawn throughand including rigid pvc conduit of20 mm dia bore with all fittings accessories complete all as specified and directed by engineer in charge. make rr,polycab,havells. 11 s&f in replacement submain wiring alongwith earth wire with 2 run of 6 sqmm (main cable and neutral) and one run of 6 sqmm as earth wireof frls pvc insulated copper conductor, single core cable drawn throughand including rigid pvc conduit of 20 mm bore with all fittings accessories complete all as specified and directed by engineer in charge. make rr,polycab,havells. 12 s&fin replacement submain wiring alongwith earth wire with 2 run of 10 sqmm (main cable and neutral) and one run of 10 sqmm as earth wireof frls pvc insulated copper conductor, single core cabledrawn throughand including rigid pvc conduit of 20 mm bore with all fittings accessories complete all as specified and directed by engineer in charge.make rr,polycab,havells.note for item no 6 to 8 : 2 run of main cable, one run of earth wire and one run length of pvc conduit of suitable bore shall be considered as one run all as specified. 13 s&f in replacement of modular switch 6 amps 250 v ac one way with isi mark including 6 amps switch frame complete all as specified and directed by engr in charge. make l&t,havells,legrand. 14 s&f in replacement of modular switch 16 a sp one way 240 voltswith isi markcomplete all as specified and directed by engr in charge . make l&t,havells,legrand. 15 s&f in replacement modular socket 6 a multi socket for 2 pin and 3 pin 240 volts with isi mark complete all as specified and directed by engr in charge. make: legrand/indoasian/havells 16 s & f in replacement ofmodular socket outlet 16 a 2/3 pin combined 240 volts with isi markcomplete all as specified and directed by engr in charge. make: legrand/indoasian/havells 17 s&f in replacement modular bell push 6awith neon 1 module 240 volts with isi markcomplete all as specified and directed by engr in charge. make: legrand/indoasian/havells 18 s&f in replacement switch piano flush button single pole one way 6 ampscomplete all as specified and directed by engr in charge. make: indoasian/anchor/havells 19 s&f in replacement switch piano flush type 15 amps single pole one waycomplete all as specified and directed by engr in charge. make: indoasian/anchor/havells 20 s&f in replacement of socket outlet5/6 amps 2 in 1, 3 pin flush typecomplete all as specified and directed by engr in charge. makelegrand/indoasian/havells 21 s&f in replacement socket outlet 2 in 1, 3 pin 5 and 15 amp, flush type complete all as specified and directed by engr in charge. make: indoasian/anchor/havells 22 s&f in replacement ceiling rose, 3 phase/ pvc/ polycarbonate isolated body complete all as specified and directed by engr in charge. make: indoasian/anchor/havells 23 s&f in replacement electronic fan regulator modular type 120 watt step type double modular as per existing complete all as specified and directed by engr in charge. make:legrand/indoasian/havells 24 s&f in replacementdimmer/ step type electronic fan regulator flush type 230 volts complete all as specified and directed. make: legrand/indoasian/havells 25 s&fin replacementelectric bell ding dong ac 230 volt complete all as specified and directed by engr in charge. 26 taking down db of spn 4/8/12 way type removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc complete all as specified and directed. 27 s&f in replacement sheet metal enclosures for dbs when mcb to be used,spn double door 240 volt, 12 way with 200 amps rated bus bar complete all as specified and directed. make: legrand/indoasian/havells 28 s&f in replacement sheet metal enclosures for dbs when mcb to be used, spn double door 240 volt, 8 way with 200 amps rated bus bar complete all as specified and directed. make: legrand/indoasian/havells 29 s&f in replacementsheet metal enclosures for dbs when mcb to be used, spn double door 240 volt, 4 way with 200 amps rated bus bar complete all as specified and directed by engr in charge. make : legrand/indoasian/havells 30 taking down mccb/mcb type removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc complete all as specified and directed. 31 s&f in replacementofmcb tpn 40 to 63 amps, 415 v complete all as specified and directed by engineer in charge.make : legrand/indoasian/havells 32 s&f in replacementofmcb spn 40 to 63 amp 240 volt 10 ka complete all as specified and directed. make: legrand/havells/hpl 33 s&f in replacementofmcb spn32 amp 240 volt 10 ka complete all as specified and directed. make:legrand/indoasian/havells 34 s&f in replacement mcb sp 40 amp to 63 amp 10 ka.240 volts complete all as specified and directed. make : legrand/indoasian/havells 35 s&f in replacement mcb sp 6 amp to 32 amp 10 ka.240 volts complete all as specified and directed. make: lelegrand/indoasian/havells 36 s&f in replacement metal clad enclosurewith one mcb single pole, 20 amps 240 volts complete all as specified and directed. make: legrand/havells/indo asian 37 s&f in replacement metal clad enclosurewith one mcb single pole, 32 amps 240 volts complete all as specified and directed. make: legrand/havells/indo asian 38 s&f in replacement modular plug & sockets distribution boardwith one mcb single pole, 32 amps 240 volts. complete all as specified and directed. make legrand/havells/indo asian 39 supply and fixing in replacement led lights fitting 1x 20w, 220v,ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by engineer in charge. 40 supply and fixingin replacement led lights fitting 1x 18w, 220v, ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by engineer in charge. 41 supply and fix in replacement only decorative laminated sheet 3mm thick of size 8 x 12 including necessary cutting of sheet for fixing switch / socket complete as specified and directed. 42 supply and fix in replacement only decorative laminated sheet 3mm thick of size 8 x 5 including necessary cutting of sheet for fixing switch / socket complete as specified and directed. 43 supply and fix in replacement only decorative laminated sheet 3mm thick of size 7 x 4 including necessary cutting of sheet for fixing switch / socket complete as specified and directed. 44 supply and fix only fan capacitor of the following capacity: 45 1.5 mfd 46 2.5 mfd 47 3.15 mfd 48 supply and fix in replacement only non metallic rigid pvc conduit medium grade 20 mm dia, isi mark complete all as specified and directed. make : kalinga premium/ supreme/ finolex 49 taking down of ceiling fan/ exhaust fan dismantling of blades, transportation to work shop and carrying out for rewinding, transportation to site, reinstallation and testing complete. 50 m&l for rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enameled copper wire of superior quality, same gauge of wire, same nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush, ball bearing where ever required complete all as specified and directed by engineer in charge. 51 all as per ser item no 43 but exhaust fan 230/300 mm sweep 52 all as per ser item no 43but exhaust fan 400 mm sweep 53 s&f ceiling fan ball bearing of suitable size & model (as per sample). make: nbc/ skf 54 m&l for replacing u clamps withrubber reel,bolts, nuts, washers and safety pin ceiling fan of any size/ make complete all as specified and directed 55 m & l for down rod of 1 height fabricated out of ms pipe 12mm dia heavy duty duly painted with one coat ofwhite paint complete all as specified and directed. 56 s &f ofcanopy of celing fans of 1200/1400mm swipe sizeheavy duty duly painted with one coat ofwhite paint complete all as specified and directed. 57 m&l for spray painting (white colour) with synthetic enamel paint to ceiling fans/exahust fan of anycapacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking mes no with black paint complete all as specified and directed by engineer in charge. 58 taking down carefully geysers 25/50 ltr capacity, opening for inspection, , cleaning, descaling, reassembling and refixing in position after carrying out repairs like soldering/ brazing etc including replacement of pressed rubber gasket, nuts, bolts, neon indicator lamp 1 amp etc.note u/s items to be paid sepretely under relivent items. 59 m&l for spray painting (white colour) with synthetic enamel paint to geysers 25/50 liters capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking mes no with black paint complete all as specified and directed by engineer in charge. 60 m & l heating element of 2.0 kw (circular) as required at site including rubber washers (isi marked) etc complete all as specified and directed (as per sample). 61 m & l heating element of 2.0 kw (rectangle) as required at site including rubber washers (isi marked) etc complete all as specified and directed make venus or as per sample. 62 s&f of storage tank made out of copper sheet of appropriate thickness and confirming to is 208 (1974) for 50 litre capacity geysers with collar complete duly tested at required pressure as per it i of 1986 of steel storage tank complete all as specified and directed. 63 s&f of storage tank made out of copper sheet of appropriate thickness and confirming to is 208 (1974) for 25 litre capacity geysers with collar complete duly tested at required pressure as per it i of 1986 of steel storage tank complete all as specified and directed. 64 m&l for replacement of insulating material (glass wool) for 25/ 50 litre capacity geysers complete all as specified anddirected by engineer in charge. 65 s&f base plate assembly 20 swg heavy duty suitable for 50 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site complete all as specified and directed (as per sample). 66 s&f base plate assembly 20 swg heavy duty suitable for 25 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site complete all as specified and directed (as per sample). 67 m&l chromium plated copper connection pipe 600mm long with two brass adopters washers and connecting up complete all as specified and directed. 68 m&l pvc connection pipe 450mm long with two brass adopters washers and connecting up complete isi mark all as specified and directed by engr in charge 69 m&l in replacement safety nut for high pressure releasecomplete all as specified and directed (as per sample). 70 s&f in replacement non return valves 15mm dia and connecting up complete all as specified and directed (isi marked).as per sample 71 m&l in replacement top cover for geysers of 25/50 ltrs capacity any make as required at site duly painted with two coats of synthetic enamel spray paint (first quality) complete all as specified and directed. 72 s&f in replacement bottom cover for geysers of 25/50 ltr any make required at site duly painted with synthetic enamel spray paint (first quality) with inspection plate in two pieces complete all as specified and directed. 73 s&f in replacement of outer cover for geyser made out of ms sheet suitable for 50 ltrs capacity geyser vertical/horigontal type complete all as specified and directed. 74 s&f in replacement of outer cover for geyser made out of ms sheet suitable for 25 ltrs capacity geyser vertical/horigontal type complete all as specified and directed. 75 s&f in replacement thermostat (isi marked) for 25/50 liters capacity geyser complete all as specified and directed. make : daspass/theeta/tte 76 s&f in replacement indicator lamp (red & green) 230 volts suitable for geyser complete all as specified and directed (as per sample) 77 supply and fixin replacementmild steel hole fastner 10mm dia, 100mm long including nut and washer complete all as specified and directed. 78 supply and fix in replacement gun metal gate valve 15 mm bore, isi marked with iron wheel head, screwed both ends for gi pipe complete all as specified and directed. make : upadhyay/ leader/ zoloto 79 s&f in replacement 9 watt led bulb suitable for thread type holder/ b 22 type holder complete all as specified and directed by engineer in charge. 80 s&f in replacement 15 watt led bulb suitable for thread type holder/ b 22 type holder complete all as specified and directed by engineer in charge. 81 s&f in replacement celing fan blade suitable for 1200mm sweep as per site requirmentcomplete all as specified and directed by engineer in charge. 82 s&f in replacement exhuast fan blade suitable for300mm/450mm sweep as per site requirmentcomplete all as specified and directed by engineer in charge. 83 supply&fixing in replacementlight freedom bldg security lightcompressing pressure, die cast housing for better aesthetics and thermal management. comprises of extruded aluminium housing with pre wired gear tray with led’s & drive, heat resistant flat glass suitable gasketed for ip65 protection, high grade power coating and fitted with toughened glass with high power led’s of 40 watt and pipe mounting arrangement for end mounting on bracket made out of 50mm dia gi pipe light grade, 1.2m long bent to shape with two sets of clamps made out of flat iron 50 x 6mm, bolts, nuts and washers and applying two coats of aluminium paint over on coat of red oxide zinc chrome primer connecting electrically with pvc mulitistranded copper cable of suitable size complete including taking down existing 40 watt sv/mh lamp fittings all as specified and directed make cg freedom+ cat pt no lsts 40 cdl oeuivalent to havells,phillps. 84 supply&fixing in replacement light freedom bldg security lightcompressing pressure, die cast housing for better aesthetics and thermal management. comprises of extruded aluminium housing with pre wired gear tray with led’s & drive, heat resistant flat glass suitable gasketed for ip65 protection, high grade power coating and fitted with toughened glass with high power led’s of 30 watt and pipe mounting arrangement for end mounting on bracket made out of 50mm dia gi pipe light grade, 1.2m long bent to shape with two sets of clamps made out of flat iron 50 x 6mm, bolts, nuts and washers and applying two coats of aluminium paint over on coat of red oxide zinc chrome primer connecting electrically with pvc mulitistranded copper cable of suitable size complete including taking down existing 30 watt sv/mh lamp fittings all as specified and directed make cg freedom+ cat pt no lsts 00 cdl oeuivalent to havells,phillps. 85 supply and fixing led light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 v ac decorative type with driver holder and led lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 86 s& f in replacementmccb db vtpnvertical load line4 way double doorip 54 ik 09 cat no507750 makelegrand orequivalent or equivelent make of l & tor c&s complete all as specified and directed. 87 supply and fixing in replacement mccb, 4 pole, 415 volt of capacity 63amp, breaking capacity25 ka , icu=100% ics thermal magnetic type adjustable type80 to 100 % confirming to iec 60947 ii, is 13947 ii , including thimbles, nuts, bolts ,washers etc and connections, etc. complete all as specifiedand directed by engr in charge make :legrands/schnieder/l&tcat part no 420053 88 m & l in replacement for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected togalvanised iron strip 25x4mm as earthinglead lead by means of gi bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate no 3 of ssr pt i incl rcc cover and ms angle iron frame, watering arrangement with gi pipe 20 mm dia and ms funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified and directed (note: gi earth streep 7.5m will be measured and paid separately) 89 m & l in replacementfor fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in gi pipe with 25x4mm galvanised iron wire complete all as specified and directed. 90 supply and fixing led lights fitting 1x 22w, 220v, ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by engineer in charge.product code lcclb24 cdl of crompton cute lineaor eqivalent inmake : havells/phillips 91 s & finverter led tube light batten of5700k to 6500k , 10w ,rated voltage 230 v ac 50 hz having high power high brightness lm 80 certified led with pc /aluminium extrusion milky diffuser front cover ,lumen maintenance of 50000 hours @ l70li ion bis certified battery of 3.7v 10w at battery operation ,back up will be 3 4 hrs, protection will be ip 20,overcharging ,deep discharging ,thermal compensation, marked with standard is 10322,lm79 complete all as specified and directed. 92 s & f in replacementled tube light batten of5700k to 6500k , 18w ,rated voltage 230 v ac 50 hz having high power high brightness lm 80 certified led with pc /aluminium extrusion milky diffuser front cover ,lumen maintenance of 50000 hours @ l70li ion bis certified battery of 3.7v 10w at battery operation ,back up will be 3 4 hrs, protection will be ip 20,overcharging ,deep discharging ,thermal compensation, marked with standard is 10322,lm79 complete all as specified.cat part no lctl18 cdl or equivalent in phillips/havells 93 s&f aesthetically designed surface mounted circular shaped decorative wall/ceiling led light of 12 wfixture with opal diffuser to give glare free light including suitable led lamp of 12 w having dimenstion dia of 300mm. and height 92 mm complete all as specified and directedmake:cg cat no lcsr 12 cdl or equalivalentof phillips/havells 94 s&f bronze coloured floral brown glass metal aesthetically designed wall mounteddecorative wallled light of8/9 wfixture with opal diffuser to give glare free light including suitable led inverter lamp of 8/9 w having lamp base e27/b22 (colour natural white/cool day/warm white).make:philips cat no 37934/06 or equalivalentof cg/halonix 95 taking down mccb any type removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc complete all as specified and directed. 96 supply and fix wall mounted indoor type factory made load line db s double door made out of crca mild steel sheet with insulating material like polyester powder coated surface mounted 12 way vtpn 415 volts ip 43 protection with suitable bus bar neutral link and earth link suitable for 4 pole mccb of 250 a (with display electronic release microprocessor based having short circuit and overload protection) 36ka as incomer & mcb sp 40 a 6 nos and 63 a 6 nos as outgoing complete all as specified and directed.note: the rate of mccb and mcb should be included in the quoted rate. 97 s&f rigid non metallic pvc conduit medium grade 20 mm dia for telephone cable complete with all fixing accessories all as specified. make: kalinga/supreme/finolex 98 s&f aesthetically designed wall mounteddecorative bedlightled light of4 wfixture with opal diffuser to give glare free light including suitable led lamp of 4 w having lamp base e27 complete all as specified and directed.make:philips cat no 56240/31 or equalivalentof cg/havells 99 s&f of inverter security light fitting 60w with alluminium pdc top maintanable clear toughfened glass suitable high efficient secoundery lence lm80cerfied ledwith 50000 hr @ l70 along with isolated electronic cc driver rtc enable with insulated copper wire covered with ss & ms zing plated and passivated.the light should be ip66 ingress protection and ik05 impact resistanceli ion bis certified battery of 3.7v 10w at battery operation ,back up will be 3 4 hrs, protection will be ip 20,overcharging ,deep discharging ,thermal compensation, marked with standard is 10322,lm79 complete all as specified. 100 supply and fixing led luminaire 600 mm x 600 mm, 35/36 watt, 220 v ac recessed type with high efficiency pmma diffuser soft glare free light complete with driver, holders & led lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.make:cg cat no lctlsn 36 cdl or equalivalentof philips/havells 101 supply and fixing modular double usbcharger 2 module 2400 ma confirming to is 13252(part 1) complete all as specified and directed ...

Due Date : May 08, 2023

Tender Value : ₹ Ref. Documents

View Tender
2
Indian Army - Delhi

36888296 bids are invited for distribution board db double door type made out of sheet metal enclosure crca sheet dust and vermin proof mcb db tpn 8 way with 200 amps rated copper busbar 415 volts with in built mccb 125 amps , distribution board db double door type made out of sheet metal enclosure crca sheet dust and vermin proof mcb db tpn 4 way with 200 amps rated copper busbar 415 volts , on load changeover switch 4 pole with steel enclosure 250 amp make havells legrand indoasian , mcb spn 32 amps make havells legrand anchor , switch socket combination white polycarbonate body 6a 16a 230 v multipurpose make anchor legrand havells , on load change over switch in steel sheet metal cladenclosure 415 v with side operated handle 4 pole cap 200a make havells legrand indoasian , on load change over switch 4 pole 315amps 400630 amp make havells legrand indoasian , mcb tpn 100 amp complete all as specified and directed make havells legrand indoasian , modular switch 1 way 16 amp 1 module make anchor legrand havells , modular socket 6a 23 pin combined 2 module make anchor roma legrand havells , modular type bell push 1m 6 amps make anchor havells legrand , bell push piano type 06 amps make anchor legrand havells , ceiling rose flush type make anchor legrand havells , switch piano type one way 16 amps make anchor legrand havells , plug top 5 amps 230 volts white polycarbonate body 3 pin type make havells anchor legrand , plug top 15 amps 230 volts white polycarbonate body 3 pin type make havells anchor legrand , lamp holder white polycarbonate body with back plate suitable for batten make anchor legrand havells , gang box suitable for two way switch make anchor legrand havells , socket 16 amp one way make anchor havells legrand , socket 6 amp one way make anchor havells legrand , modular fan regulator 1 module make anchor havells legrand , modular type frame plate with matching cover plates 3m make anchor havells legrand , modular type frame plate with matching cover plates 12m make anchor legrand havells , metal clad plug and socket 20 amps with mcb , capacitor 25 mfd 315mfd and 4mfd and 6mfd , modular socket 16a 6a 23 pin combined 2 module , modular switch 1 way 6 amp 1 module , bell ding dong ac 230 v , metal clad enclosure with mcb , switch piano type normal white polycarbonate body single pole one way 6 amp 230 v...

Due Date : March 22, 2023

Tender Value : ₹ Ref. Documents

View Tender
3
Indian Army - Delhi

36374569 bids are invited for switches anchor legrand havells , ceiling rose flush type make anchor legrand havells , switch piano type one way 16 amps make anchor legrand havells , plug top 5 amps 230 volts white polycarbonate body 3 pin type make havells anchor legrand , plug top 15 amps 230 volts white polycarbonate body 3 pin type make havells anchor legrand , lamp holder white polycarbonate body with back plate suitable for batten make anchor legrand havells , gang box suitable for two way switch make anchor legrand havells , socket 16 amp one way make anchor havells legrand , socket 6 amp one way make anchor havells legrand , modular fan regulator 1 module make anchor havells legrand , modular type frame plate with matching cover plates 3m make anchor havells legrand , modular type frame plate with matching cover plates 12m make anchor legrand havells , metal clad plug and socket 20 amps with mcb , capacitor 25 mfd 315mfd and 4mfd and 6mfd , modular socket 16a 6a 23 pin combined 2 module , modular switch 1 way 6 amp 1 module , bell ding dong ac 230 v , metal clad enclosure with mcb , switch piano type normal white polycarbonate body single pole one way 6 amp 230 v total quantity : 4110...

Due Date : March 03, 2023

Tender Value : ₹ Ref. Documents

View Tender
4
Military Engineer Services - Delhi

35583751 repair / maintenance of dg sets of various capacities, servicing and maint of eot crane and repair / maintenance of sewage pumps, sewage treatment plant and connected misc e / m items / works at anand parbat mil stn under ge ( north ) delhi cantt 10. comprehensive maintenance of dg sets & amf panel of make as mentioned against each dg sets below including preventive maintenance checks of engine and alternator for trouble free function as per recommendation and attending break down / complaint as and when on required basis, monthly maintenance on regular basis complete with preventive maintenance ( b check ) twice a year including replacement of engine oil / coolant, replacement of required necessary spares and replacement of all types of filters, belts along with rectification of minor defects and cleaning of air filters / breather, coolant tank with blower and labour for filling / topping up and tuning of engine for dg set as listed below complete all as specified and directed. note : the rates quotedagainst for ser item no 1.01 to 1.07items shall be applicable for a period of 01 month. 2 40 kva dg set 01 nos ( location: ranjith hall, make: crompton greaves ) 3 62.5 kva dg set 01 nos ( location: bapa nagar pump house, make: kirloskar ) 4 62.5 kva dg set 01 nos ( location: map ph ii pump house, make: greaves power ) 5 100 kva dg set 01 nos ( location: map ph i pump house, make: jackson / kirloskar ) 6 125 kva dg set 01 nos ( location: amar vihar, make: greaves / kirloskar ) 7 160 kva dg set 01 nos ( location: klp area, make: cumins / stamford ) 8 200 kva dg set 03 nos ( location: deepak vihar, make: greaves power ) 9 notes: ( a ) after monthly maintenance, the work to be certified by je ( e / m ) / engr in charge on job card. ( b ) cost of materials and labour as mentioned in below are not included with comprehensive maintanance. ( c ) the comprehensive maintenance of work shall be done through respective oems or their authorised dealers. ( d ) the contractor shall carry outroutine checking of the complete dg sets and rectify the minor / major defects noticed immediately.if complaints were not attended within one hours a penalty of rs 500 per fault per hour shall be imposed over contractor and shall be deduct from his dues. ( e ) contractor has to carry out monthly maintenance with examination of suction and exhaust valves for smooth operation of dg sets. ( f ) contractor shall be responsible to monitor the followings of alldg sets during comprehensive maintenance andthe cost of same is deemed to be included in the quoted rate: ( i ) examination and cleaning of fuel injection, nozzles. ( ii ) check clearance of suction and exhaust valves and adjust if required, ( iii ) changing of oil filters, fuel filters screen filters assy. ( iv ) maintenance of coolant level all as directed by the engineer in charge. ( v ) change of hydraulic governor oil ( vi ) change of oils ( vii ) clean alternator winding in position by forced air and internal surfaces lubricate de & nde bearings ( viii ) tightining of all nut bolts. ( ix ) greasing of all points. ( x ) test ir value of alternator winding and recording the readings ( xi ) checking of any leaking in fuel & oil lines and rectification of the same. ( xiii ) any other check as reqd for efficient running of equipment all as specified & directed by engr in charge. ( xiv ) the rates quoted against the above mentioned items is deemed to be included for cost of labour, cost of t & p requiredfor replacement of unserviceable parts and cost of handling / transportation of defective item to & from civil workshop for repair if required. spares shall be measured and paid separately under respective items.supply only items labour cost is deemed to be included in this item. ( xv ) in case of break down, the additional manpower if required will be arranged by the contractor. the cost of the same are deemed to be included in the quoted rate. 10 supply only in replacement of v belts for radiator fan / main shaft / cam shaft for the dg set of capacity 40 kvato 200kva as per existing size and model complete all as specified and direceted. 11 supply only in replacement of fuel filters for the dg set of capacity 40 kva to 200kva as per existing size and model complete all as specified and direceted. 12 supply only in replacement of oil lub filters for the dg set of capacity 40 kva 200kva as per existing size and model complete all as specified and direceted. 13 supply only in replacement of air filters for the dg set of capacity 40 kva 200kva as per existing size and model complete all as specified and direceted. 14 supply only in replacement of lubricant oil ( 15w40 ) for the dg set of capacity 40 kva 200kva as per existing size and model complete all as specified and direceted. 15 supply only in replacement of coolant for the dg set of capacity 40 kva 200kva as per existing size and model complete all as specified and direceted. 16 s&f in repairs rewininding with super enamelled copper wire of existing size & insulating the field coil assembly, replacing bentec assembly ofthe self starter assembly 12 / 24 voltsand refixing the same after repairs andtesting complete all as specified. 17 s&f in replacement ofself starter assembly 12 / 24 volts existing size and model andtesting complete all as specified. 18 s&f in repairs lead acid batteries of 12 volts, 110 150 ah, 22 28 plates, maintenance free type including accesories like terminal clamps, copper cable of required size and length, petroleum jelly and baterry initial charging all as specified and as directed. make exide / amar raja / luminious / hbl 19 s&f in repairs battery charger capacity 6 / 12 amp, 12 / 24 voltsfor dg set complete all as specified and directed. 20 m&l for carring out repairs to 12 / 24volt dynamo by replacement of carbon brush, electronic regulator, rectifier, windings, bearings reassembling the same and testing complete all as specified and directed. 21 s&f in replacement aganist repairs of stop solenoid / shut off valve of capacity 40 to 200 kva dg sets of existing make along with screen filterincluding wiring connecting to panel circuit, starting and testing on load complete all as specified and directed. 22 s&f in repairs of thermostat element alongwith complete assy for dg set connection and testing complete all as specified and directed. 23 m&l for repairs and calibration of pt fuel pump as per the calibration procedure and norms as per manufactures guide linesfor dg set of various capacity from40 to 200kvaincluding replacement of worn out and unserviceable o rings / shutt off valve / plungers complete all as specified and directed. 24 s&f in replacement of control assembly fordg set capacity40 to 200 kvawith necessary modification to controll wiring, replacement of controll relays, programming with all the parameters for safety protection and running suitable for the existing dg sets. . 25 s&f in replacement of necessary control wiring for making the auto / manual mode condition of the existing dg sets 40 to 200 kva complete all as specified and directed. 26 s&f in replacement ofautomatic voltage regulator ( avr ) suitable for dg set of 40 kva to 200 kva capacity including taking out old unserviceable avr and making all connection, testing for smooth operation complete all as specified and directed. 27 s&f in replacement of magnetic pickup sensor suitable for 40 200 kva of exist makedg set connecting with panel circuit, starting and testing on load complete all as specified and directed. 28 s&f in replacement of oil pressure sensor suitable for 40 200 kva of make exist dg set connecting with panel circuit, starting and testing on load complete all as specified and directed. 29 s&f in replacement of coolant tempetaruresensor suitable for 40 200 kva of make exist dg set connecting with panel circuit, starting and testing on load complete all as specified and directed. 30 dismantaling the unserviceable radiator from dg set of capacity 40 to 200 kva of exist make andtransporting to contractors workshopfor locating the fault and overhauling & cleaning using air compressor, de scaling with acid, removal of leakage including soldering and welding, brazing as required and renewal of gaskets, nuts, bolts, mounting pads, hoses, clamps, clips, etc. and refixing / reassembling its original position after making proper connections, aligning, testing including transporting back the same to site complete all as specified and directed.note : the rates quoted by the contractor shall deemed to include thereplaced spares / parts, transportation cost from site of installation to contractors repair workshop and back. 31 cleaning of diesel tank of various capacity dg set inside / out side oftank complete with drain out dhpp ( n ) and cleaning tank and applying two coats of synthetic enamel paint ( 1st grade quality ) on out side of tank including necessary weldings and refilling the dhpp ( n ) & testing complete all as specified and directed. 32 s&f in repairs of electronic timers with auxilary voltage of 110 / 240 / 415v 50hz for operation of 12 120 secs complete all as specified and directed. 33 s&f in repairs of speed control units 40 to 200 kva dg stes of exist makecomplete all as specified and directed. 34 s&f in repairs auxilary control contactors side mounting add ons ( 1no+1nc ) as per existing capacity at respective site complete all as specified and directed. 35 s&f in replacement of new power contactor of capacity 360 amp 4 pole, 415 volts with side mounting, mcx type auxilary contacts operable at 220 v, 50hz including taking down ofdefective power contactor from amf panel complete all as specified and directed. 36 s&f in replacement of 3 phase digital multi function meter with suitable accessories and fixing arrangements complete all as specified and directed. 37 s&fin replacement of selector switch suitable for 415 volts complete all as specified and directed. 38 s&fin replacament of led type phase indicator to be fitted on panel ( r, y , b as per site requirement ) as per existing model / capacity including taking down of old unserviceable one complete all as specified and directed. 39 s&f in replacment of digital typevoltmeter 0 500volts with selector switch, 3 phase, complete all as specified and directed. 40 s&f in replacment repairs of digital type ammeter 0 200 / 300 amps with 3 nos ct coils and selector switch, 3 pohase complete all as speicified and directed. 41 s&f in replacement for alarm system with complete wiring complete all as specified and directed. 42 s&f in replacment of dg setdoor lock and key assembly suitable for exit dg set doors as per existing model complete all as specified and directed. 43 removal of rusted ms sheet at any portion of canopy and supply and fixing of 3.15 mm thick ms sheet of size 300 mm x 300 mm with fitting / welding as specified and directed. 44 m&l forpainting two coats of synthetic enamel paint of existing colour at site over a coat of red oxide primer for dg sets complete body surfaces complete all as specified and directed. 45 m&l for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground ( earth pit not less than 2.25 meters deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead by means of bolts, nuts, check nuts and washer of galvanised iron strip 32 x 6mm as earth lead as shown in electrical plate no. 3 of ssr part i connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft / loose soil, returning filling, disposal od surplus soil, earth pit in pcc 1:3:6 type c 1 using 20mm graded crushed stone aggregate pit, funnel, 20mm bore gi tubing medium grade for watering pipe, 40mm bore medium grade gi pipe for protection of gi earth strip and pre cast earth pit cover 50mm thick made of rcc ( 1:1.5:3 ) type a1 duly reinforced with 8mm dia tmt bar @ 100 mm c / c both ways, one lifting handle made out of 10mm dia tmt bar 250mm long embedded in cover slab and cover, wire, copper lugs etc mesh, charcoal and common salt in alternate layer of 15 cm thick including taking down old unserviceable one complete all as specified and directed. 46 repair of earth pit including required exacavation, earth work and pcc work to make good damaged / disturbed surfaces of earth pit chamber & making new pit cover of rcc 1:2:4 type b 1 using 20mm graded crushed stone aggregate reinforced and lifting handle on rcc cover with 8mm ms bars at 150 mm centre to centre both ways including supply & fixing of wire mesh and funnel including re connection of earth wire / strip with panel / transformer using gi nut, bolts & washer complete all as specified & directed 47 m&l for repair / maint / overhauling long travel mechanism with lubrication lt wheel & gear box, over hauling hoist mechanism with reduction gear box, over hauling cross travel mechanism with gear box, testing & commissioning 5 ton eot crane, replacement of defective any minor parts complete all as specified and directed. 48 m&l for painting of complete eot crane with golden yellow colour paint including writing letters or figures ( block, roman, italic or indian ) n exc. 30 cm high with synthetic enamel paint as per colour scheme all as specified ( make rockwell ) 49 m&l for replacement of pvc flexible cable 1.5 sqmm 16 core copper wire complete all as specified and directed. 50 m&l for replacement of rotary geard limit switch ratio 48:1 complete all as specified and directed. 51 m&l for replacement of lever type limit switch complete all as specified and directed. 52 m&l for replacement of e.m brake ( 200mm ) coil 415v, ac complete all as specified and directed. 53 m&l for replacement of lubrication gear oil no.68 complete all as specified and directed. 54 m&l for replacement of current collector shrouded busbar type complete all as specified and directed. 55 m&l for replacement of 3 pole power contactor type ml4 type complete all as specified and directed. 56 m&l for replacement of hydraulic thrustor brake 300mm 34kg complete all as specified and directed. 57 m&l in replacement of damage ct shaft made out of en8 material medium carbon steeloff size in 80mm x 500mm with various step and key way slot 12mm both side on shaft complete all as specified and directed. 58 m&l in replacement of spherical roller bearing off suitable size complete all as specified and directed. 59 comprehensive maintenance inclding preventive and periodical maintenane and servicing of ro systems complete 03 nos, i.e.500 lph 01 no & 2000 lph 02 nos capacity. make of eukawa & ion exchange with connected motors, upvc pipe lines, butterfly valves, multi port valves etc, respectively, including servicing / cleaning of all filters / back wash etcin reliable safe and efficient condition through oem by periodically examining, preventive maintenance of plants, pipe lines, valves for trouble free function as per recommendation and attending breakdown / complaint as and when on required basis, maintenance on regular basis complete with preventive maintenanceincluding replacement of upvc pipes ( different sizes ) short lengths upto 5 mtrs, fittings, flanges with nut and bolts, pressure gauges, replacement of required necessary fittings alongwith rectification of defects complete all as specified and directed.all as directed. notes : ( i ) the contractor shall carry out routine checking of the complete plants and rectify the any defects noticed immediately ( iii ) treated water tds should be maintained less than 100mg / l and as directed, submit he monthly water test report of treated water. ( iv ) the rates quotedagainst for this item shall be applicable for a period of 01 month. ( v ) rates quoted aginst the above mentioned work wise items are required of efficient working of plant are to be included in the job . ( vi ) unserviceable and consumable parts will be measured and paid seperately unde relevent items as mention in below. ( vii ) if complaints were not rectified within 04 hrs of intimation, the following penalities will be imposed and deducted from contractors dues : ( a ) rs 1500 / per complaint for not attending the complaint and keeping pendig 04 hrs to 12 hrs / per complaint. ( b ) rs 3000 / per complaint for not attending the complaint and keeping 12 hrs to 24 hrs / per complaint. 60 replacement in repairs membrane high pressure, 500 lph.make dow / hydronautics / csm 61 replacement in repairs membrane high pressure, 2000 lph.make as per sample 62 replacement in repairsfor sediment ( sand and silt ) , dirt and rust particles, high efficiency, low pressure drop, removal up to 5 micron filter cartridges suitable 500& 2000lph capacity makes as per existing all as specified and directed. 63 replacement media in sand filter ( gravel, pebbles & fine sand ) complete all as specified and directed. 64 replacement activated carban in barban filter complete all as specified and directed. 65 supply only ro antiscalent high ph for membrane cleaner / water treat ment chemical complete all as specified and directed. 66 replacement in repairs rotameter suitable for 500 / 2000lph capacity ro system. make as per sample. 67 replacement in repairs of upvc pipe 20 to 40 mm dia with fitting complete suitable for ro systemas per sample. 68 replacement in repairs of membrane housing suitable for 500 lph capacity ro system of eukawa make .as per sample 69 replacement in repairs of membrane housing suitable for 2000 lph capacity ro system of ion exchange make .as per sample 70 replacement in repairs of housing bowl suitable for 500 & 2000 lph capacity ro system, make .as per sample. 71 replacement in repairs of lt relay, 230v ac supply suitable for 500 & 2000 lph capacity ro systemmake .as per sample. 72 s&f in reapirs of multi port valves fixing at sand filter and carbon filter vessles all as specified and directed. makes as per sample. 73 s&f, testing and commissioning high pressure pumps for ro plant, vertical type having speed 2780 rpm, 230 v, 2hp, class f insulation, eff 76% complete with fixing necessary accessories including taking down old unserviceable deposit to store yard complete all as specified and as directed. make : cri / crompton / kirloskar. 74 s&f, testing and commissioning self priming regenrative pumps for ro plant, mini star model having speed 2780 rpm, 230 v, 1hp, class b insulation, size 25x25mm, head 6 45 mtrs, dis range 50 lpmwith fixing necessary accessories incl taking down old unsv deposit to store yard complete all as specified and as directed. make : cri / cropmton / kirloskar. 75 s&f in repairs for rotational moulded polyethylene water storage tanks100 ltrs capacity ( cylindrical vertical with closed top in white colour transparent type for using antiscaling chemicals for ro plants ) hoisted and fixed in position all as specified and directed. 76 m&l for disconnection electrical and water connection of the raw water feed monoblock pumpset with motor and base plate and transporting to work shop opening carefully and rewinding the burnt out winding, replacement of bushes, gland packing, ball bearing, rubber gasket nut and bolt and replacing the required spares parts as per existing complete re fixing its in original position and making out all electrical and water connection and testing complete all as specified and directed for the size / capacity of motors upto3 hp.note : rate includes transportation of motor from the place of installation for repairing and reinstalling the same on existing foundation & testing & commisioning. 77 m&l for disconnection electrical and water connection of the high presuure feed pump, multi stage centrifugal type and transporting to work shop opening carefully and rewinding the burnt out winding, replacement of bushes, gland packing, ball bearing, rubber gasket nut and bolt and replacing the required spares parts as per existing complete re fixing its in original position and making out all electrical and water connection and testing complete all as specified and directed for the size / capacity of motors upto3 hp.note : rate includes transportation of motor from the place of installation for repairing and reinstalling the same on existing foundation & testing & commisioning. 78 s&f in repairs for antiscalant dosing unit capacity upto 6 lph @ 3.5 bar including inlet and outlet flexible pvc pipes all as specified and directed. 79 s&f in repairs pressure gauges for monitoring of flow meters all as specified and directed. ( makes as per sample ) 80 testing of treated water of stp and submission of detailed test report to the office of the engr in charge and testing in govt approved laboratory as approved. ( a ) carrying out minimum essential testing of water as per is 3025mandatory for chemical, odour, ph value tss bod cod residual chlorine total nitrogen, sulphate, oil and grease ammonical nitrogen ( nh3 n ) and bacteriological total collifrom organisms as below: rest of the characterstied of the treated water shall be as per is : 3025note 1 rate quoted shall deemed to be included for : ( i ) cost of sterilised bottle as required ( ii ) to and fro transportation charges for collection of sample 81 ( i ) tss: < 10 mg / ltrs 82 ( ii ) bod : < 10 mg / ltrs 83 ( iii ) cod :< 150 mg / ltrs 84 ( iv ) ph : 6.5 8.5 85 ( v ) total coliform : , < 100 mpn / 100 ml ( desired nil ) 86 ( vi ) residual ci > 1 mg / ltr 87 rest of the characterstied of the treated water shall be as per is : 3025 88 note 2 rates quoted shall deemed to be included for : 89 ( i ) cost of sterilised bottle as required 90 ( ii ) to and from transportation charges for collection of sample 91 note 3 in case contractor fails to provide monthly test report, a penalty of rs 3000 / per test report shall be recovered from the contractor dues. 92 testing of sewage sludge water as per revlevant is of stp and submission of detailed test report to the office of the engr in charge and testing in govt approved laboratory as approved by ge ( a ) carrying out minimum essential testing of sewage water as per revlevant is mandatory for chemical, odour, ph value tss bod cod total nitrogen, sulphate, oil and grease ammonical nitrogen ( nh3 n ) and bacteriological total collifrom organisms and other charaterstics as per relevant is of sewage water: note 1 rates quoted shall deemed to be included for : ( i ) cost of sterilised bottle as required ( ii ) to and fro transportation charges for collection of sample 93 supply & mixing of sodium hypo choloride having 10% content complete all as specified and directed. 94 supply & mixing of poly aluminium choloride 100% purity complete all as specified and directed. 95 supply & mixing of poly electrolite 100% purity complete all as specified and directed. 96 supply & filling compressor oil 460 complete all as specified and directed. 97 material and labour in replacement of quartz silica sand 32 64 grade complete all as specified and directed. 98 material and labour in replacement of quartz silica sand 16 32 grade complete all as specified and directed. 99 material and labour in replacement of quartz silica sand 8 16 grade complete all as specified and directed. 100 material and labour in replacement of quartz silica sand 4 8 grade complete all as specified and directed. 101 material and labour in replacement of activated carbon iv 1000 complete all as specified and directed. 102 material and labour in replacement of feb ( mbbr ) media suitable for stp make as per sample. 103 taking out complete pebbles from the bottom upto the depth of 0.6 mtr of the filter of size 1800 mm dia and 2300 mm height and refilling the same pebbles after washing and cleaning thoroughly. 104 periodical cleaning of sewage well as capacity ( upto 5mtrs dia and 9 mtrs depth ) cum and removing of settle down sewage sludge cum mud / de silting etc. all as required at site anddirected atanand parbat mil stn ( klp location, map ph i ) and cod area. note: the rate quoated by the tenderer is deemed to be included in the unit rate of the following : 105 diesel driven pump set of appropriate capacity not less than 5 / 7.5 hp with operatorincluding necessary pol required at site for de watering of sewage septic water including pvc heavy duty flexible hose pipe for suction and delivery purposes 106 tractor mountedstorage tank of appropriate capacity not less than 1 kl with driver directly collected from the soak well and disposing the same to the location out side of military contonement where as approved by pcb and also liase with delhi muncipal corporation board as directed. 107 tractor / truck with driver for disposal of sewage sludge and pol required for the same ( duly covered with necessary tarpaline ) and depositing the same to the location where approved by pcb or as directed.. 108 labour element and t&p required for removal of settled down sewage sludge / mud inside the sewage tank for scooping out from inside and below the septic / staining sewage water inside the well and lifting the same and deposited out side of military contonment and out side location as mentioned above. 109 appropriate qty of phenyle required at site for sterilization of sewage sludge being collected in the sewage tank and all as directed. 110 necessary oxygen mask, gloves, gum boot and all other safety aspects and including necessary phawda, steel bucket, manila rope etc. required at site and all as directed. 111 m&l for cleaning oftreated water tank atanand parbat at klp loaction stp of storage capacity of water 50000 gallons, filter feed tank of capacity 63 cum and chlorine contact tank of capacity 17 cum thoroughly by removing mud, grits etc from the tankby following method : 112 cleaning inner surface of tank complete by scraping with steel wire brush and and removing mud and sludge collected inside the tank manuallyat a distance not exceeding 50 mtr all as directed. 113 washing with clean water and bleaching powder mixture throughly complete tank internally and removel of left out sludge if any at site at a distance not exceeding 50mtr all as directed. 114 supply and laying including taking up galvanised steel water tubing medium grade isi marked screwed socketed joints complete with all tube fitting ( such as bends, elbow, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, threaded flanges and unions, etc ) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc., also cutting, screwing and waste and for making forged bends on piping as required at site including taking down the existing pipe line with fitting etc of following sizes: 115 80 mm dia 116 50 mm dia 117 40 mm dia 118 supply and laying mild steel water tubing heavy duty with welded joints complete with all tube fitting ( such as bends, elbow, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, flanges and unions, etc ) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc., also cutting, screwing, welding and waste end for making forged bends on piping as required at site including taking down the existing pipe line with fitting etc of following sizes: 119 40 mm dia 120 50 mm dia 121 80 mm dia 122 100 mm dia 123 supply and fixingbutterfly valves iron body screwed down high pressure with iron wheel head / long shank and cup butterfly type screwed both ends for iron pipe including taking out unserviceable valve for the following sizes: 124 40 mm dia 125 50 mm dia 126 80 mm dia 127 m&l for spray painting two coats of synthetic enameled paint of specified colour after preparation of surface and writing letters and numbers complete of complete sewage treatment plant capacity 100 cum / day with equalization tank, raw sewage pumps, mbbr reactor, chlorine tank, filter feed pump, dual media filters, rcc treated water tank, treated filter pumps, sludge drying beds, oil free blowers and accessories complete all as specified and directed. 128 m&l for disconnection electrical and water connection of the monoblock pumpset with motor and base plate and transporting to work shop opening carefully and replacement of winding, bushes, gland packing, ball bearing, rubber gasket nut and bolt and replacing the required spares parts as per existing complete re fixing its in original position and making out all electrical and water connection and testing complete all as specified and directed for the size / capacity of motors upto7.5 hp.note : rate includes transportation of motor from the place of installation for repairing and reinstalling the same on existing foundation & testing & commisioning. 129 m&l for disconnection electrical and water connection of the compressors and transporting to work shop opening carefully and replacement of spare parts bushes, gland packing, ball bearing, rubber gasket nut and bolt and replacing the required spares parts as per existing complete re fixing its in original position and making out all electrical and water connection and testing complete all as specified and directed for the size / capacity of up to 110 m3 / hr.note : rate includes transportation of compressor from the place of installation for repairing and reinstalling the same on existing foundation & testing & commisioning. 130 m&l for lifting / lowering of non clogging submersible pump and motor capacity up to 7.5 hpfrom sewage well after disconnecting electric and water connection of any make and any size capacity under any of chain pulley block or manually appropriate length upto 10m after opening the socket and pipe eplacement of winding, bushes, gland packing, ball bearing, thrust bearings, sand guard plate, gm impellers, rubber gasket nut and bolt and replacing the required spares parts as per existing complete re fixing its in original position and making out all electrical and water connection and testing complete all as specified and directed. 131 supply and fixing in reapirs of multi port valvesfixing at mediafilter vesselses for stpall as specified and directed. makes as per sample. 132 s&f in repairs for dosing unit capacity electronic metering pumps for chemiclas dosing system for stp incl inlet and outlet flexible pvc pipes all as specified and directed.makes as per sample 133 material & labour in repairs for cross arms, bracings, supports, clamps, angle iron, flats, ladders and back plates fabricated from ms structural steel sections including nuts, bolts and washers of suitable sizes including welding, bending ( cold or hot ) , drilling holes for bolts in any shape or size as indicated or directed and inclusive of two coats of aluminum paint over one coat of red oxide primer, complete all as directed. 134 m&l for diamantling, opening of automatic voltage stabilizer 200 kva rating ( 300 480 volts ) , out put 415 v including disconnecting electric connectioncomplete all as specified & directed. 135 m&l for repairs taking up deemer assembly complete by carefully by manual chain pulley block and replaceemnt of burnt wiinding coil with existingsize and gauge of copper winding wire inclduing transportation charges from site to work shop and back complete all as specified & directed. 136 m&l for replacment of motor assembly for moving of 20 kg load complete all as specified & directed. 137 m&l for replacement of carbon brush ( 03 sets of 03 nos each ) complete all as specified & directed. 138 m&l for repair of internal wiring and servicing complete all as specified & directed. 139 m&l for in repairs machine pressed precast conctete interlocking paver block with grey cement and no pigment any shape and size confirming to is 15658 2006 of 60mm thickness, m 35 grade including sand filling including dismantling complete all as specified and directed. 140 demolition of pcc in ground floor and paving not exceeding 15 cm thickness ( below or above ground level ) complete all as specified & directed. 141 m&l for broken stone boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, wateredand rammed to a true surface including demolition complete all as specified and directed. 142 m&l for sand filling under floors or in foundations including watering and consolidation complete all as specified & directed. 143 shifting and relocating of trolley mounted transformer of any capacity and ratingin aor ( i.e. kwc camp mrs area toanand parbat mil stn mrs area ) outdoor type including removing and refixingnecessary cable connections complete all as specified and directed. note: ( i ) necesary t&p complete shall be arranged by the contractor. ( ii ) during shifting process damage to any existing infrastructure, the same is make good by his own cost. 144 taking up existing di pipe sewage water pumping system line 80 to 150mm bore including fittings and relaying, jointing and testing of same in to trenches in position after cleaning and removal of scale / blockage complete for the following sizes note earth work, lead joint and rubber tyton joints shall be measured and paid separately under relevant items : 145 material and labour for di specials of any size such as tees, bends of any sizeand radius, tapers, collers, tail pieces, caps and plugs etc incl takinng down unsv complete all as specified. 146 m&l for rubber gasket joint ( tyton joint ) with jointingmaterial for di pipe of 80 to 150mm bore including taking down unserviceable complete all as specified and directed. 147 material & labour for earthing with galvanised steel earth plate electrode 60cmx 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer ofcharcoal dust and common salt filling in alternate layers and electrode connections by usinggalvanised iron strip of size 32 x 6 mm as earthing lead ( upto the body ofthe equipment ) by means ofbolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm diagi pipe connected to main switch board or main control board and gi pipe medium grade 20mm bore for watering and including funnel , wire mesh , rcc pit cover and pcc chamber pit with pcc ( 1:3:6 ) type c 2 using 40mm graded crushed stone aggregate, including excavation and earth work in any type ofsoil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate no 5 ofssr 1991 ( part i ) including testing on completion if desired earth resistance is not obtained the earthing will be redone without extra cost complete all as specified anddirected. 148 s&f earth continuity conuctor or main earth lead fixed to wall on batten or recess or chess or buried in ground drawn in conduit / pipe or fixed to the pole or any other situation for loop earthing etc as required32x6 mm dia galvanised iron strip all as per specified and directed....

Due Date : January 31, 2023

Tender Value : ₹ 24.33 Lakhs

View Tender
5
Rites Limited - Delhi

34804995 sale of un useable rolling stock items i .o1 ferrous items ( ms and alloy steel ) outer bearing cover, bevel gear, gear wheel, wearing plates, upper back plate, dummy handle, pipes, rods, slack adjusters, steel plates, diesel engine block 4 cylinder etc. 1 .02 ferrous items ( cast iron ) outer bearing cover, bevel gear, gear wheel, wearing plates, upper back plate, dummy handle, buffers, vacuum cylinder, air reservior, cbc coupler. pipes, rods, slack adjusters, steel plates, diesel engine block 4 cylinder etc. 1 .03 rubber items, gaskets and mix items ( hose pipes and auxilarry reservior pipes having steel wire, liners, gaskets etc. ) ...

Due Date : December 05, 2022

Tender Value : ₹ Ref. Documents

View Tender
6
Indian Army - Delhi

34567798 bids are invited for modular socket 16a 6a 2 by 3 pin combined 2 module modular socket 16 a 6a 2 by 3 pin combined 2 module , modular switch 1 way 6 amp 1 module , modular switch 1 way 16 amp 1 module , modular socket 6a 2by 3 pin combined 2 module , ceiling rose flush type , plug top 5 amps 230 volts while polycarbonate body 3 pin type , plug top 15 amps 230 volts white polycarbonate body 3 pin type , lamp holder white polycarbonate body with back plate auitable for batten , gang box suitable for two way switch , metal clad enclosure with mcb , distribution board db 4 way double door with 200 amps...

Due Date : October 31, 2022

Tender Value : ₹ Ref. Documents

View Tender
7
Indian Army - Delhi

33755015 bids are invited for metal clad plug and socket 20 amps , modular socket 16 a 6a 2 by 3 pin combined 2 module , modular switch 1 way 6 amp 1 module , modular switch 1 way 16 amp 1 module , modular socket 6a 2by 3 pin combined 2 module , ceiling rose flush type , plug top 5 amps 230 volts while polycarbonate body 3 pin type , plug top 15 amps 230 voltswhite polycarbonate body 3 pin type , lamp holder whitepolycarbonate body with back plate auitable for batten , gangbox suitable for two way switch , metal clad enclosurewith mcb total quantity : 1090...

Due Date : September 08, 2022

Tender Value : ₹ Ref. Documents

View Tender
8
Delhi Jal Board - Delhi

33637697 nit no.21 ( 2022 23 ) cwa ( w and s ) i purchase of chlorine safety items under cwa ( w and s ) i division , ba set scba set without cylinder complete set approved by en 137:2006 ( type ii ) includes composite back plate have a fixed height, standard carrying harness, cylinder strap with cam lock, pressure reducer, integrated lung demand valve ( ldv ) , mechanical pressure gauge with warning whistle with positive pressure full facemask incorporates a wide panoramic visor to maximise the field of vision and a front mounted speech diaphragm for easy communication with colleagues. , spare cylinder carbon composite cylinder for breathing apparatus set seamless carbon composite cylinder ( type3 ) 6.8 ltr x 300 bar capacity assembled with self locking wheel operated ba cylinder valve, approving authority: en 12245, ce / ped standard, ccoe / peso nagpur approved ( total duration 45 minutes & working duration 30 minutes ) , gas tight suit features • premium protection against toxic and corrosive gaseous, liquid and solid chemicals • leading garment chosen by hazmat responders worldwide• extremely durable, puncture and tear resistant fabrics• wide range of garment styles available, includingtotally encapsulated, vapor protective level a and liquid splash protective level b suits• suit provides at least 30 minutes of protection against 322 chemical challenges• , hand gloves for chemical handling cut 1maxichem, product code: 56 635, color coating: green / black, color liner: neutral design:gauntlet 35cm, coating material: nitrile, liner type :seamless nylon with lycra, length: 30cm, palm thickness:1.30mm en 388: 4121, en 374 akl secure safety when using chemicals •liquitech chemical resistance •excellents comfort through a synthetic coating combined with a super light seamless knit liner. •micro cup non slip grip finish allows for a controlled grip in wet applications. •class leading form, fit and feel, reducing hand fatigue and increasing comfort. •available in cut resistance application: gear box assembly chemical handling ( general ) handling small castings light metal fabrication & parts handling primary, secondary & final assembly, shock absorber assembly maintenance. , gumboot with steel toe direct injected fully moulded single piece pvc, lining : complete body reinforcement with heavy duty cotton lining, available sizes : 5 to 11, confirming to is 15298 part 2. , windsock cloth made out of red and white polypropylene cloth 2ft. dia and 4ft. long and other end, 1.5ft. dia with supported two rows brass eyelets at equal distance for tying arrangement with extra nylon rope with reflective tape, *windsock cloth without stand. , stretcher the mobilize foldable stretcher is used by virtually every rescue team in any rescue scenario including the military, emergency rescue services and industry whether oil and gas, mining, construction or anywhere there may be a need to have a solution to a real or potential danger or hazard. all our pole stretchers feature heavy duty aluminium poles for easy handling and heavy duty, vinyl coated nylon covers that resist stains, blood and bodily fluids. nonslip handgrips help emts keep a firm grasp on the stretchers. color orange, self weight 4.8 kg, load limit 159 kg, gross weight 5.5 kg, lift type horizontal. , respirator full facepiece reusable respirator, respiratory protection, medium. the full facepiece reusable respirator helps provide protection against certain airborne contaminants. versatile—use with particulate filters, gas / vapor cartridges and supplied air respirator systems. these features combine to make a comfortable, practical and economical solution. recommended applications include assembly , chemical clean up, chemical handling, chemical splash, chipping, chiselling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring / casting, sanding, sawing, and welding. industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals. niosh, a federal government regulatory agency, has tested and approved filters or supplied air systems to help reduce breathing certain airborne contaminants. the facepiece also meets the impact requirements of the ansi z87.1 2003 standard, high impact level for face and eye protection , portable chlorine gas detector cl2 with replaceable battery measuring range 0 50 ppm. the protégé sg is a reusable single gas monitor that can be configured to detect 13 gases which provides maximum flexibility to deal with unknown gas hazards. with interchangeable smart sensors, including both low power ir and electrochemical options, the protégé sg offers maximum versatility in a reusable solution.maximum flexibility: the plug and play swappable smart sensors allow a single monitor to detect several different toxic and combustible gases, supporting multiple applications. users can change sensors on the go and the monitor will automatically recognise the sensor type and update the gas label on the display. the versatility of the sg allows users to efficiently manage their time. no programming is required when switching sensors. easy to use: with one button activation, adjustable alarm settings and an easy to read, multi language display, the protégé sg is intuitive and user friendly. turn it on, and the monitor does the rest. with data logging of up to 5, 000 events and a customisable lcd display capable of displaying real time gas readings, the protégé sg is packed with features and functionality, but requires minimal training. the protégé sg is highly versatile and allows the user to configure the monitor based on their application or specific company requirements. durable and reliable: the protégé sg is available in ip66 / 67 ingress protection. using a lithium replaceable battery provides service life of 1.5 to 2 years for toxic sensors. the sturdy case can withstand the rigours of most industrial environments and is reliable in operating temperatures of 20°c to +50. the protégé sg performs self diagnostics at start up giving users confidence to focus on the job. turn iton and forget about it. sensors: sensor options: h2s, co, o2, o3, hcn, no, no2, ph3, so2, nh3, cl2 and clo2. accessories: masterdock ii – bump and calibration station , calibration adaptor , pdg application software , ir connect , calibration gas, standard and demand flow regulators. , full body harness one dorsal d ring and two chest attachment for rope grab fall arrestor, fray proof dope dyed polyester webbing, metal buckles of high strength alloy steel, high strength polyester stitching, adjustment straps only at chest and thighs, standard en 361 ce marked double lnyard with shock absorber conception hook opening 55 mm. , safety vented helmet made uv & impact resistance hdpe suspension : 6 point plastic suspension with ratchet fit adjustment chin strap : adjustable, size : 51 – 62 cm sweat band : brushed cloth on foam, key features design : three ribs at the top of the helmet, adaptability : fully compatible with the range of face and hearing accessories confirming to standard : en 397 ce marked , first aid box medic 5000 ( for 50 person ) , colour: high visibility orange., dimensions: 32 x 22 x 13 cms., complies with ansi z308.1 2009 type iii standards, has versatile internal partitioning and plexiglas cover on both halves of the kit to cover contents and to make the contents visible while opening , designed for mobile and stationary use, has a high visibility orange colour making it clearly visible even from far off distance, supplied with wall mounting holder & mounting accessories, the design and functioning of the kits are in such a way that the kits can be taken off their wall holders quickly and taken directly up to the accident site, kit casing is made of robust high grade abs plastic, which make it impact resistant & temperature resistant, kits are maintenance free & can be dismantled into individual parts for cleaning / sanititizing purpose, kits are designed & engineered in such a way that the contents are optimally protected against water droplets and dust by the continuous neoprene rubber seal running throughout the opening of the kit, kits have 2 equal halves, versatile internal partitioning and transparent plexiglass covers, easily operated turn locks, integrated handle, content list, provision to fill in emergency numbers, standard silk screen printed film inscription....

Due Date : September 01, 2022

Tender Value : ₹ Ref. Documents

View Tender
9
Delhi Jal Board - Delhi

33629702 purchase of chlorine safety items under cwa ( w and s ) i division , ba set scba set without cylinder complete set approved by en 137:2006 ( type ii ) includes composite back plate have a fixed height, standard carrying harness, cylinder strap with cam lock, pressure reducer, integrated lung demand valve ( ldv ) , mechanical pressure gauge with warning whistle with positive pressure full facemask incorporates a wide panoramic visor to maximise the field of vision and a front mounted speech diaphragm for easy communication with colleagues , spare cylinder carbon composite cylinder for breathing apparatus set seamless carbon composite cylinder ( type3 ) 6.8 ltr x 300 bar capacity assembled with self locking wheel operated ba cylinder valve, approving authority: en 12245, ce / ped standard, ccoe / peso nagpur approved ( total duration 45 minutes & working duration 30 minutes ) , gas tight suit features • premium protection against toxic and corrosive gaseous, liquid and solid chemicals • leading garment chosen by hazmat responders worldwide• extremely durable, puncture and tear resistant fabrics• wide range of garment styles available, includingtotally encapsulated, vapor protective level a and liquid splash protective level b suits• suit provides at least 30 minutes of protection against 322 chemical challenges• , hand gloves for chemical handling cut 1maxichem, product code: 56 635, color coating: green / black, color liner: neutral design:gauntlet 35cm, coating material: nitrile, liner type :seamless nylon with lycra, length: 30cm, palm thickness:1.30mm en 388: 4121, en 374 akl secure safety when using chemicals •liquitech chemical resistance •excellents comfort through a synthetic coating combined with a super light seamless knit liner. •micro cup non slip grip finish allows for a controlled grip in wet applications. •class leading form, fit and feel, reducing hand fatigue and increasing comfort. •available in cut resistance application: gear box assembly chemical handling ( general ) handling small castings light metal fabrication & parts handling primary, secondary & final assembly, shock absorber assembly maintenance. , gumboot with steel toe direct injected fully moulded single piece pvc, lining : complete body reinforcement with heavy duty cotton lining, available sizes : 5 to 11, confirming to is 15298 part 2. , windsock cloth made out of red and white polypropylene cloth 2ft. dia and 4ft. long and other end, 1.5ft. dia with supported two rows brass eyelets at equal distance for tying arrangement with extra nylon rope with reflective tape, *windsock cloth without stand. , stretcher the mobilize foldable stretcher is used by virtually every rescue team in any rescue scenario including the military, emergency rescue services and industry whether oil and gas, mining, construction or anywhere there may be a need to have a solution to a real or potential danger or hazard. all our pole stretchers feature heavy duty aluminium poles for easy handling and heavy duty, vinyl coated nylon covers that resist stains, blood and bodily fluids. nonslip handgrips help emts keep a firm grasp on the stretchers. color orange, self weight 4.8 kg, load limit 159 kg, gross weight 5.5 kg, lift type horizontal. , respirator full facepiece reusable respirator, respiratory protection, medium. the full facepiece reusable respirator helps provide protection against certain airborne contaminants. versatile—use with particulate filters, gas / vapor cartridges and supplied air respirator systems. these features combine to make a comfortable, practical and economical solution. recommended applications include assembly , chemical clean up, chemical handling, chemical splash, chipping, chiselling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring / casting, sanding, sawing, and welding. industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals. niosh, a federal government regulatory agency, has tested and approved filters or supplied air systems to help reduce breathing certain airborne contaminants. the facepiece also meets the impact requirements of the ansi z87.1 2003 standard, high impact level for face and eye protection , portable chlorine gas detector cl2 with replaceable battery measuring range 0 50 ppm. the protégé sg is a reusable single gas monitor that can be configured to detect 13 gases which provides maximum flexibility to deal with unknown gas hazards. with interchangeable smart sensors, including both low power ir and electrochemical options, the protégé sg offers maximum versatility in a reusable solution.maximum flexibility: the plug and play swappable smart sensors allow a single monitor to detect several different toxic and combustible gases, supporting multiple applications. users can change sensors on the go and...

Due Date : September 01, 2022

Tender Value : ₹ Ref. Documents

View Tender
10
Ashok Leland Limited - Delhi

30942879 auction sale of 1. brass scrap radiators, brake drum, disks, scrap iron, aluminum, rubber, plywood, bumpers, motor parts, glass, plastic, fibre and other misc. auto parts. 1 ac alternator de bracket 2 ac alternator rotor (120+150 amp) 3 ac alternator 4 ac alternator pulley 5 ac alternator rear cover 6 ac clutch coil 7 ac clutch pulley 8 ac compressor crankshaft 9 ac compressor housing 10 ac compressor piston 11 ac cooling coil 12 ac drier filter 13 ac idler pulley 14 air comp. crankshaft 15 air comp. head 16 air compressor body 17 air compressor sleeve 18 air drier head 19 air tank 20 alternator stator (ac+nac) 21 armature shaft (self) 22 bellow piston 23 bellow plate 24 belt tensioner assembly 25 blower motor 26 boll joint 27 brake calliper bracket 28 brake calliper housing 29 brake chamber (big) 30 brake drum 31 brake liner shoe 32 brake pedal 33 brass rivet (kg) 34 brass scrap 35 calliper housing unit 36 camshaft 37 cat con pipe 38 coil pack 39 con rod 40 condenser coil 41 condenser motor 42 crown wheel 43 damper pulley 44 differential pinion shaft 45 driver fan 46 power steering drop arm 47 dual brake valve 48 ecas valve 49 eng. alternator rear cover 50 engine alternator 51 engine alternator rotor 52 engine block 53 engine crankshaft 54 engine damper pulley 55 engine cylinder head 56 engine idler pulley 57 engine mounting rear 58 engine oil sump 59 exhaust manifold 60 fan bracket 61 field coil 62 flow control valve 63 flywheel housing 64 flywheel ring gear 65 front brake chamber 66 front brake disc 67 front cover housing 68 front gear housing cover 69 gas mass flow sensor 70 head valve 71 horn 72 i bolt 73 icm 74 intercooler 75 king pin 76 oil cooler 77 oil filter plate 78 oil pump 79 parallel rod 80 parallel rod bush 81 piston 82 piston sleeve 83 power steering pump 84 push rod cover 85 radiator 86 rear brake carrier plate 87 rear cover housing 88 rear flap 89 relay valve 90 self drive bendix 91 self front housing 92 self rear housing 93 self starter 94 side flap 95 slack adjuster 96 steering box assembly 97 system protection valve 98 throttle actuator 99 tie rod end rhs lhs 100 timing gear case 101 transmission bottom plate 102 turbine shaft of turbocharger 103 turbocharger elbow 104 viscous fan pulley 105 waste gate valve 106 water pump 107 wheel hub 108 wheel rim 109 window assembly small 110 wiper motor 111 wiring harness (kg) copper weight only 40% of total wiring weight 112 front brake pad 113 knukle assy 114 bevel box 115 tie rod assembly 116 front anti bar rod 117 differential assembly 118 fan armature 119 copper line kit 120 oil filter 121 push rod 122 solenoid switch 123 self housing 124 alternator rectifier(ac+nac) 125 ac alternator fan 126 engine alternator pulley 127 spring brake actuator cover 128 spring brake actuator head 129 air comp. conrod 130 air comp. bearing 131 ac compressor conrod 132 ac comp. oil pump 133 ac comp. bearing 134 ac comp. valve plate 135 front display 136 inner display board 137 inversion relay valve 138 pneumatic cylinder 139 quick release valve 140 shocker absorber 141 fuel shut off valve 142 side display board 143 wiper arm 144 ac alternator regulator 145 ac alternator bearing 146 adjuster unit 147 engine alternator bearing 148 cam gear 149 condenser fan 150 ecm 151 ac comp. sump plate 152 ac comp. oil pump plate 153 ac comp. head 154 ac comp. front seal cover 155 calliper lever assy 156 turbine 157 stator 158 locke up piston 159 damper assy 160 c3 c4 piston 161 suction filter 162 harness, internal 163 reaction plate 164 friction plate 165 thrust plate 166 transmission filter 167 bolt 168 race stator 169 solenoid body 170 tcm 171 rear cover 172 back plate 173 c2 return 174 carrier 176 front engine mounting 177 propellor shaft assy. 178 ac heating coil ...

Due Date : February 10, 2022

Tender Value : ₹ Ref. Documents

View Tender
11
Municipal Corporation - Delhi

30235176 nit no. 24 item no. 01 repairing and improvement of electrical installation and procurement of electrical material for day to day maintenance of various pt / ctc blocks in ward 12 s, 13 s, 17 s, 18 s, 27 s and 29 s under west zone. 1 supply of 12 ( 300mm ) sweep 1400 rpm exhaust fan heavy duty complete with shutter, blade etc as required 2 installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. upto 450 mm sweep 3 supply of led tube type luminaire 20 watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient leds with the following: ( a ) total system wattage 2o watt+ / 5% ( b ) luminous efficacy lumens / watt >=95 ( c ) power factor >=0.95 4 s / 1 / t / c of led tube type luminaire 20 watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient leds with the following: ( a ) total system wattage 2o watt+ / 5% ( b ) luminous efficacy lumens / watt >=95 ( c ) power factor >=0.95 5 sitc of single phase monoblock pump set complete with all accessories workable on 240 / 515 volts, 50 hz ac supply ( a ) 1 hp ( 0.75 kw ) single phase pump set, head from 12 30 metre suction and delivery 25x25 mm. 6 sitc of 30w led flood light luminiare fitted with lens, made of pressure die cast aluminium housing & toughened glass cover complete with the following specification as reqd. ( b ) total system wattage=30 watt+ / 5% ( d ) luminiare efficacy>=100lm / w 7 p / f hot press sheet moulded compound ( smc ) fire retardant ( temp. resistance up to 200 c ) , ip 55 weather proof pole box of inner dimension 200xl60x98mm ( ns ) complete with suitablearrangement for fixing of 2 nos of 6 to 32 amp single pole mcb & 63 amp. double pole isolator ( mcb / lsolator excluded ) with neutral link duly shorting on din channel with2 nos of ms clamps with 55 back plate of suitable size with danger monogram property printed on the cover etc as reqd. 8 sitc of 10w surface / wall mounted led bulkhead factual impact dust and water resistant luminaires with ip 65 / 66 protection 9 supply of 1.5 sq. mm isi marked, frls pvc insulated, single core copper conductor cable 10 supply of 2.5 sq. mm isi marked, frls pvc insulated, single core copper conductor cable 11 supply of 5 amps to 32 amps rating, 240 / 415 volts, 10 ka, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. ( a ) single pole 12 ( b ) double pole 13 p&fof following sizes of pvc insulated & pvc sheathed copper conductor 3 core submersible cable confirming to is.694 / 1990 etc. as reqd. ( a ) 3 x2.5 sq.mm. 14 supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930, part ii complete with fitting and cutting, jointing etc. direct in ground ( 75 cm below ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia ( od 63 mm & id 51 mm nominal ) 15 supplying, lowering, testing and commissoning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i / c connection etc. as reqd. ( a ) single phase 1.5 hp having discharge of 72 lpm approx. at 49m head. 16 supply , installation , testing and commissioning of cubical type control panel board for single phase & three phasesubmersible pumping set of following rating complete withcontactor, relay, mcb, condenser, voltmeter, ammeter, and indication lamp etc including connections etc as reqd. ( a ) 1.5 hp ( single phase ) 17 supplying and fixing following sizes of insulated steel flexible safety rope for holding submersible pump set i / c clips etc complete as required. ( a ) 6 mm 18 supplying, lowering and fixing following size of g.i. pipe ( m class ) i / c cutting threading on both sides etc isi marked etc as reqd. ( a ) 32 mm dia 19 s& f following sizes ofgi elbow as reqd. ( a ) 32 mm dia 20 s&f following sizes ofgi socket as reqd. ( a ) 32 mm dia 21 lifting the existing submersible pump set 1 to 5 hp with all accessories from well and lowering the same from following depths complete as reqd. ( a ) from depths up to 40 meters deeps 22 rewinding of single / three phase a.c.motors of vertical type multi stage submersible pump set ( dismantled material will be retained by contractor ) of following ratings: ( a ) single phase 1.5 hp 23 repairing of the pumping unit of the single phase ( 100 mm ) , vertical type, multistage, submersible pump setby replacement of following accessories / parts etc compete as reqd. ( a ) gun metal bush / bearing. 24 ( b ) pump shaft. 25 ( c ) impeller 26 copper rewinding ofsingle phase monoblock pump set workable on 240 / 415 volts, 50 hz ac supply ( dismantled material will be retained by contractor ) complete as required of following rating: ( a ) 1 hp ( 0.75 kw ) single phase pump set, head from 12 30 metre suction and delivery 25x25 mm. 27 copper rewinding of exhaust fan ( upto 450mm sweep ) 1400 rpmheavy duty complete as required of following size: ( a ) 15 28 ( b ) 9 / 12 29 supply of xlpe insulated pvc sheathed al. conductor un armoured cable 1.1kv grade conforming to is 7098 of following size. 2x4 sq. mm 30 wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group c 31 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) . ( a ) 6 way , double door 32 ( b ) 8 way , double door 33 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm...

Due Date : December 16, 2021

Tender Value : ₹ 4.98 Lakhs

View Tender
12
Indian Army - Delhi

30215865 tender for ahrr , dept of ophthalmology , needle, atraumatic 6 mm 3 / 8 circle, spatulated, micro point10 / 0 nylon monofilament, pkt of 12. , needle, atraumatic 6mm 3 / 8 circle, spatulated, micro point polymide monofilament, 9 / 0 pkt of 12. , needle, atraumatic 6mm 3 / 8 circle, spatulated, micro point polymide monifilament, 8 / 0 pkt of 12. , needle, atraumatic 8mm 3 / 8 circle, reverse cutting micro point gut plain, 6 / 10, pkt of 12. , ctr ( capsule tension rings ) , disposable iris retractor for stretching small pupils ( box of 5 ) , hiv surgery packs for ophthalmology. pack of drapes for hiv patients with disposable cataract surgery instruments , vicryl 6 / 0 suture. synthetic braided coated polygalactin 910 violet coated with polycaprolate size 6 / 0, 30 cms, 3 / 8circle micropoint 08 mm spatulated micropoint needle, double armed. item will be used during surgery and evaluated for needle tip snagging, ease of manipulation, tissue snagging and brakage. those items causingany of these issues will be rejected , prolene 10 0.double armed, straight needle. item will be used during surgery and evaluated for needle tip snagging, ease of manipulation, tissue snagging and brakage. those items causing any of these issues will be rejected.non absorbable sutures with good tensile strength. does not undergo hydrolytic degradation and therefore long lasting. for iris repair and scleral fixation iol , 6 0 mersilk 0 mersilk 10mm, 3 / 8 circle, round bodied silk black braided, silicone coated, suture length 36cm. item will be used during surgery and evaluated for needle tip snagging, ease of manipulation, tissue snagging and brakage. those items causing any of these issues wil be rejected , 5 0 mersilk 5 0 mersilk 10mm, 3 / 8 circle, round bodied silk black braided, silicone coated, suture length 76cm. item will be used during surgery and evaluated for needle tip snagging, ease of manipulation, tissue snagging and brakage. those items causing any of these issues wil be rejected , preloaded disposable ctr injector, size 13 / 11 or 12 / 10 , anterior chamber maintainer 20 g with roughenedtip, 3.5 mm cannula with bevelled tip andunique annular rings for anterior chamber self retention , overall length 12 mm, with silicon tubing 200mm long withadaptor. , keratoprosthesis, permnaent sterile pack, made up of pmma, based on boston design, consisting of three parts i.e. front plate with stem, back plate and lock ring , punctum plugs, each pkt containing 2 sterile plugs, made up of implant grade silicone, premounted on a disposable inserter / dilator, on depressing the knob on the inserter, plug should get released easi , sterile surgical skin marker for skin and corneal marking , hydroxyapatite orbital implants post evisceration, biointegrated, post evisceration, size10mm, 12mm, 14mm, 16mm, 18mm, 20mm and 22mm , preloaded punctal plugs for dry eyes , sizers for assessing orbital implant size post evisceration / enucleation sizes 12 mm, 14 mm, 16 mm, 18 mm, 20 mm, 22 mm , bioceramic orbital implant post evisceration / enucleation sizes 12mm, 14mm, 16mm, 18mm, 20mm, 22mm , flexible conformers for adult sockets of sizes 16mm, 18mm, 20 mm , 22 mm, 23mm , 24 mm, 25mm , flexible conformers for paediatric sockets sizes 12mm, 14mm , 27 g sterile disposable canula for viscoelastics, 27 g * 0.875 inches ( 0.40*22mm ) angled 8 mm from the end , * 0.875 inches ( 0.40*22mm ) angled 8 mm from the end , these specifications are subject to ease of use and functionality with reference to pressure required to inject / compatness of hub against syringes & stability of the tip in the anterior chamber , 45 degree groove knife microsurgical knife for cataract and pterygium surgery for cataract and pterygium surgery. during surgery, there should beno movement of the eye while making incisions under topical anaesthesia. should make incision without need for counter pressure. incision should be horizontal, slit without any traingulation of the flap. blade should have incision length m , knife bard parker, blade size 1 fitting ( commercial no. 11 ) packet of 6 sterile , knife bard parker, blade size 1 fitting ( commercial no. 12 ) packet of 6 sterile , knife bard parker, blade size 1 fitting ( commercial no. 15 ) packet of 6 sterile , disposable artificial anterior chamber 3 piece with base having two ports with silicone tubing for injecting viscoelastic, bss, air and can hold cornea 14 18mm diameter along with companion vacuum trephine. , disposable corneal punch2 piece design diameter 7 9.5mm with ultrashort preloaded blade and a spring loaded syringe having four cardinal holes and 20 vacuum holes. , mesh wrapped bioceramic orbital implant , lester jones tube, lester jones tube, made up of pyrex, 19 to 23mm, for conjunctivodacryocystorhinostomy , polyvinylpyrrollidone ( pvp ) preloaded perforated punctal plugs for punctal stenosis , lacrimal intubation sets silicon , eye lid weights gold plated , poly tetra fluoro ethylene ( ptfe ) strip for ptosis surgery two sizes width 2mm, 3mm , intra ocular lenses single, multi pieces j / c loop, uv absorbed, powers 17 d to 23 d. , aniridia iol. pmma 4.0mm, optic, 9.0 mm bod, c loop 13.75mm overall dia, a constant 118.5 to 119, ac depth 4.9mm, dioptric powers 1.0 30 d, colour brown , scleral fixated iol optic diameter 6.5 mm, optic design equiconvex, haptic design modified c loop , acd 5 mm, diopter range 6 d to 30 d and also 15 to 25 d in 0.5 d steps, lens material uv absorbing pmma with 2 loops in the haptics at 180 degrees. a constant 118.5 , scleral contact lens, large diameter gas permeable lenses, vaulting over entire corneal surface resting on sclera, should be stable, easy to insert, comfortable, should not dislodge on its own , riboflavin 0.1% iso osmolar solution for ophthalmic use for corneal collagen cross linking , riboflavin 0.1% hypo osmolar solution for ophthalmic use for corneal collagen cross linking , rigid conformers for adult sockets right and left conformer ranging from 16mm, 18mm, 20 mm , 22 mm, 23mm , 24 mm, 25mm , rigid conformers for paediatric sockets sizes 12 mm, 14 mm ( pack of three of each size ) , artificial eyes ( stock eyes ) , , mini monoka monocanalicular intubation set , self inflating tissue expanders hydrogel, for expanding orbital volume sphere of different volume 1ml, 2ml, 3ml, 4ml, 5ml , cannula, air injection, high craft style 27 / 30 g , ophthalmic surgical drapes with drainage pouch ( 100 x 70 / 75 cms ) , balanced salt solution plastic pouch, balanced salt solution plastic pouch, isotonic sterile irrigating solution with ph 7.5 and osmolality 300mosm / kg in clear polypropylene bag with a grey butyl stopper and aluminium seal. should be able to withstand 60 mmhg pressurization. , sterile eyewipes lubricated with water and 0.9% nacl , inj balanced salt solution plus, 01 bottle glass 480 ml and 01 vial single dose 20ml, active ingredient nacl 7.44mg / ml, kcl 0.395mg / ml, nahco3 2.19mg / ml and napo4 dibasic 0.433mg / ml. must be us fda approved. must be approved for intraocular use. company should have never withdrawn the product from the market in the past 5 years. there should be no lag in fluid flow, when connected to vgfi and no leak from thebottle at 60 mm of hg. usfda / bis / ce approved , disposable silicone sleeve 70, 2.1x 1mm disposable silicone sleeve 70, 2.1x 1mm only. usfda / bis / ce certified items will be accepted , soft tip needle 27g .disposable 27g, 30mm needle with soft silicone tip. only usfda / bis / ce certified items will be accepted. required for vitreoretinal surgery for injecting dyes, trriamcinolone. no is specifications available for this item , microsurgical instrument retinal hydrodissection cannula 38g.38 g, 23 / 25g shaft tapers to 38 g needle. i.d flexible tip. 32mm long ( 1.3 inch ) .i.d flexible tip. 32mm long ( 1.3 inch ) . for subretinal injection of dye, tpa, anti vegf , 26g ½” needle, 100 per box, sterile individually packed , 30g ½” needle , 100 per box, sterile individually packed , sterile disposable canula 25g for irrigation , 25g* 0.875 inches ( 0.50 * 22mm ) angled 04 mm from the end irrigating canula , sterile disposable canula 27g for irrigation , 27 g * 0.875 inches ( 0.40*22 mm ) angled 04 mm from the end irrigating canula , microscope bulb ( zesis posterior segement operating microscope ( lumera ) 12v 150w philips , bulb for carl zeiss slit lamp biomicroscope, 6v, 20w , bulb for carl zeissfundus camera, 12v, 50w , bulbs for infrared ( 810nm ) , micropulse, long pulse laser with slit lamp delivery system , bulb for operating microscope ophthalmic model om 5 15v, 150w , bulb for operating microscope ophthalmic model opmi visu 200 :12v, 75w , bulb for operating microscope ophthalmic with focus control model om 9: 12v, 100w , bulb for indirect ophthalmoscope heine 06v , bulb for appasamy yag laser slit lamp, 12v, 30w , bulb for slit lamp with std access model xcel 700, 6v, 12w , bulb for hag streit slit lamp 6v, 4.5w , ubm: hp desk jet d 4368, catridge no 860 black &861 color , automated perimeter visual field analyser, tuner tn 3250 , tonometer prisms, plastic disposable for haag streit pattern tonometer , tonometer prisms, plastic disposable for zeiss pattern tonometer , three way stop cock ( plastic ) , disposable scleral encirclage 40 style.2mmx0.75mm. 125mm long. style 2mmx0.75mm. 125mm long. only usfda / bis / ce certfied items will be accepted. , disposable scleral buckle number 277, 2.5mm width x 9.0 x 7.mm groove disposable scleral buckle number 277, 2.5mm width x 9.0 x 7.mm groove only usfda / bis / ce certified items will be accepted , soft tip needle23g disposable 23g 30mm needle with soft silicone tip. , soft tip needle 25g, disposable 25g 30mm needle with soft silicone tip. only usfda / bis / ce certified items will be accepted. required for vitreoretinal surgery for injecting dyes, trriamcinolone. , sterile disposable micropore filter.sterile, endotoxin free 0.2micron pes filter endotoxin free 0.2micron pes filter media for ultrafiltration of gas and injections ( micropore filter ) , syringe 1 ml with detachable 30 g or 26 g needle ( sterile ) , the syringe should be sterile, individually packed with a removable attached needle and markings in 10 divisions per ml....

Due Date : December 30, 2021

Tender Value : ₹ 86.58 Lakhs

View Tender
13
Home Department - Delhi

29406084 bids are invited for supply of cylinder with back plate face mask for fire fighting total quantity : 250...

Due Date : November 08, 2021

Tender Value : ₹ Ref. Documents

View Tender
14
Matexnet Limited - Delhi

29250730 auction sale of 1 brake shoe 2 brake pad 3 broken wooden 4 gatta 5 panni 6 paper bag 7 set box 8 wooden 9 plastic scrap 10 heavy iron 11 tin tupperlight iron 12 back plate 13 electrical material 14 tsb sand 15 iron drum 16 plastic drum 17 plastic pallets 18 rubber scrap wastepaint plastic 19 scraptrolley wheel...

Due Date : September 23, 2021

Tender Value : ₹ Ref. Documents

View Tender
15
Delhi Metro Rail Corporation Limited - Delhi

28820216 supply of procurement of to seat ato seat spares of rs1/rs2/rs9procurement of to seat ato seat spares of rs1/rs2/rs9,to seat release handle (rs1/rs3) specification as per sample, material ss304. , to seat back plate (rs1/rs3) specification as per sample, material ss304. , to seat bent plastic washer (rs1/rs3) specification as per sample, material plastic. , to seat plastic washer (rs1/rs3)specification as per sample, material plastic. , rollar track assembly only for to seat of rs1 mild steel with powder coating assembly and rollar(as per sample ) , roller track assembly with lever for to seat of rs1 mild steel with powder coating assembly androllar (as per sample ) , ato seat plate (rs1/rs3) specification as per sample, material ss304. , ato seat special pin (rs1/rs3) specification as per sample, material ss304. , ato seat special spring (rs1/rs3) specification as per sample, material spring steel. , to seat guide rail small (rs2/rs9) specification as per sample, material mild steel withpowder coating. , to seat guide rail big (rs2/rs9) specification as per sample, material mild steel withpowder coating. , to seat release handle for lateral movement (rs2/rs9), specification as persample, material mild steel. , to seat allen head bolt (rs2/rs9) specification m6*45 grade 12.9, material mild steel. , to seat dome head allen key bolt (rs2/rs9), specification m10*16 grade 10.9,material ms. , to seat special pin (rs2/rs9)specification as per sample, material ss304. , to seat lock pin (rs2/rs9)specification as per sample, material ms. , to seat spring (rs2/rs9) specification as per sample, material spring steel. , to seat back rest sheet rs 3 specification as per sample, material ss304. , to seat clamp (rs 3) specification as per sample, material ss304. , to seat cross clamp (rs3) specification as per sample, material ss304. , to seat spacer (rs3) specification as per sample, material mild steel with powder coating. , to seat special bolt nds (rs3) specification as per sample, material ss304. , to seat special bolt ds (rs3) specification as per sample, material ss304. , to seat special bolt (rs3) specification as per sample, material ss304. , to seat release handle for vertical movement (rs9), specification as persample, material mild steel. , to seat special bolt (rs9) specification as per sample, material ms. , to seat hand rest left (rs9) specification as per sample, approx length: 340 mm,thickness: 67mm, widthl 43mm, material as per sample. , to seat hand rest right (rs9) specification as per sample, approx length: 340 mm,thickness: 67mm, widthl 43mm, material as per sample....

Due Date : August 20, 2021

Tender Value : ₹ Ref. Documents

View Tender
16
Ministry Of Health And Family Welfare - Delhi

26641272 annual maintenance of staff cars of mohfw , discrpiction of items ( please cote rate excluding gst ) , servicing & lubrication , dry servicing & lubrication , greasing the car only , rubbing & polishing the car , replacing oil filter & engine oil change , washing , engine tuning , pollution check up , rubbing only , polishing only , servicing & including rpm setting , clutch adjustment , change of fuel filter , nut & bolt tightening , fan belt adjustment , engine assy removing & refitting , taking compression test , engine overhauling or replace cylinder block , engine decarbonising & tuning ( machine job extra ) , cylinder head gasket change , engine tune up including tappet , engine timing setting , timing chain , gear & adjuster change , radiator cleaning after opening , water pump overhauling , engine main and big end . , bearing replacing and adjusting , replacement fly wheel ring / gear , replace fan belt , fuel pump overhauling , front stab . bush change , replacing choke & accelerator wire , carburettor cleaning and adjustment , distributor cleaning and adjustment , checking fuel average with one litre of petrol extra , removing and refitting radiator , cleaning radiator , replacing radiator hose pipe , replacing oil pressure pipe , radiator leakage repair , replacing ignition coil , replacing engine foundation / mounting each , coolant kit fitting , rear main oil leakage rectification , enigne lath / machine job , enigne assy , removining & refitting with ac compression test , replacing cylinder head , valving grinding & top adjustment , replacing piston ring or piston assly , checking , connection rod alignment & engine tuning ( machine job extra ) , replacement fly wheel ring / gear with ac , remaking carburetor butterfly , adjusting tappets , grinding rocker arms , cylinder head ( recheckof half engine assy . ) , replacing the accelerator cable , relacing timming cover oil seal & packing , replacing timming cover oil seal & packing with ac , change & carburetor adjustment , replace engine back plate packing , replace valve rocket arm including rappats adjusting , fuel pump replacing , replacing choke , replacing fuel pump gsket , replacing distributor ht cable , sprak plug cleaning , replacing and adjusting gats , replacing manifold gasket , replacing enigne front plate gasket , replacing engine front plate gasket with ac , replacement cam shaft , con . rod bearing remove , replace , ajd , & refit , foot brake adjustment , hand brake adjustment , brake general overhauling , overhauling master cylinder & bleeding , brake lining change , replacing rear brake drum each , replacing front brake drum , replace front wheel oil seal ( each ) , replace rear wheel oil seal each , replace hand brake cable , replace master cylinder and bleeding , overhaul front wheel cylinder & bleeding ( each ) , overhaul rear wheel cylinder & bleeding ( each ) , overhaul all 4 wheel cylinder & bleeding & adjust , replace front brake lining set / pads / caliper / oh , replace stop light switch , replace front & rear brake lining ( complete set ) , replace brake hose & bleeding , complete overhauling of brake system ( master cylinder , wheel cylinders , brake line , bleedin adjustment ) lathe job for drum tunning extra . , brake lathe job , gear box assly . remove & refit , gear box assly overhauling , replace front oil seal ( including engine remove and refit ) , replace rear oil seal , gear level replacing ( hand ) , replacing gear linkage ball joint each , adjusting gear and linkage , overhaul gear leakage , replace gear plate , replace gear control rod of pivot bracket , removing and refit steering assembly , welding rear shocker flooring plate , under petrol tank remove and refit , replacing steering wheel , steering overhauling , replace top and bottom felt / column bush , replacing steering boot ( each ) toe in , replace hall joint , replace column boot , only adjuster searing , welding shocker plates ( each ) toe in , wheel alignment , steering lathe work , replace ball joint & set toe in old model ) , replace steering column ( support assy ) , replace steering column bearing , replace steering column tube , complete front suspension overhauling , only adjust front suspension , complete rubber bush kit replacing ( front & rear ) with wheel alignment , replace rear rod spring / coil assembly , replace tie bar bush ( one side ) , removing one shock absorber & replacing worn out bushes ( each front ) , both rear spring re cambering and refitting extra leaf , remove and refit front wheel oil seal , replacing front suspension bush , torsion bar replacing ( one side ) , suspension lathe job , complete front suspension , front suspension adjustment , remove and refit front wheel oil seal ( both side ) , checking & resetting chamber caster & toe in , replace panthe rod , replace rear rod spring u bolt ( each side ) , resetting tension bar height ( each ) , adjust rear height with spacers , adjust front height with spacers , replace upper arm , replace upper arm ball joint ( each ) , replace lower arm ball joint ( each ) , replace rear lower arm , replace front suspension lower arm ( one side ) , adjusting toe in , remove and refit rear axle assembly , differential overhauling , differential repair , differential lathe work , replace pinion oil seal and torque pinion nut to specifications . , replace rear axle shaft ( one side ) , replace differential packing for leakage , replace rear axle bearing ( one side ) , replace rear axle oil seal ( one side ) , replace rear brake drum ( each ) , replace differiantial gasket , propeller shaft remove and refit , propeller shaft universal joint changing , balance of propeller shaft , replace propeller shaft splinted yoke , shaft lathe work , propeller shaft overhaul , replace propeller shaft rubber cuppling , remove , clean & refit fuel tank , replace petrol tank hardboard cover , replace fuel tank hose pipe , replace petrol flexible pipe ( each ) , battery recharging , alternator overhauling , self starter overhauling , horn tune up ( each ) , indicator repairing , speedometer cable change , wiper machine overhauling , general electrical check up , complete front wiring change , head light bulb changing and focusing the light , wiper arm / blade replace each , replacing head light switch , replacing fuel meter , replacing side & tail light bulb ( each ) , replacing head light bulb ( each ) , replace stop light switch , replace dash board bulb , replace flasher unit / horn relay ( each ) , horn ring assy . o / h , change complete front , rear wiring , coolent system fitting , door lock removing , repair , replace , adjustment ( each ) , door glass machine overhauling , door glass machine electric overhauling , door glass change , dickey lock repairing , replace door gola set , replace door rubber beading change , padding of front seat ( each ) , door hinge pins repairing / replace each door , removing & replacing rear wind screen glass / rubber , removing & replacing front wind screen glass / rubber . , replace bonnet hinges each , removing / replacing / repairing ventilator window ( each ) , remove & refitting of new hard board each door , padding of rear seat ( each ) , removing and replacing front grill , seat , roof & carpet dry cleaning / inside dry cleaning , removing , repair , adjustment door hand ( each ) outer , making front door hinge pin eack door , remove , replage , repair door glass window machine ( each ) , quarter glass each , setting ventilator tension / spring , replace quarter ventilator glass rubber , replace ventilator glass ( each ) , replace door lock set , replace door channel set , replace door handle cup , replace dicky hinge each , re chrome plating center piece ( without any dent ) , re chrome plating front / rear bumper each , replace door beeding set , re...

Due Date : February 11, 2021

Tender Value : ₹ 15 Lakhs

View Tender
17
Department Of Economic Affairs - Delhi

26256291 tender for inviting online bids for purchase of consumable items for budget press in department of economic affairs, ministry of finance, north block offer regarding 2 ps plate goss v 30 machine  [ technova tourus / gemini plus ] size 660 mm x 1020 mm x .28mm ( min. 50 nos. packing ) 3 ps plate harris  n 420 machine  [ technova tourus / gemini plus ] size 652 mm x 980 mm x .28mm ( min. 50 nos. packing ) 4 ps plate man roland 200 machine  [ technova tourus / gemini plus ] size 605 mm x 740 mm x .28mm ( min. 50 nos. packing ) 5 rubbing & polishing the car 6 replacing oil filter & engine oil change 7 washing 8 engine tuning 9 pollution check up 10 rubbing only 11 polishing only 12 servicing & including rpm setting, clutch adjust 13 change of fuel filter, nut & bolt tightening 14 fan belt adjustment 15 note: combined rates for the above 13 items ( except s.no.8 ) may be quoted 16 category 2 17 rubber compressible blanket 1025 mm x 685 mm  x 1.68 mm  with bars [ 3 ply ] . bar size: top 25 mm width, 1025 mm in length. bar size: bottom 12 mm width, 1025 mm in length. thickness of steel bar 0.8 mm ) total thickness with bar 2.48 mm for goss v 30 web offset machine ( cow brand ) 18 rubber compressible blanket 686 mm x 990 mm x 1.95 mm with bars [ 4 ply ] . bar size: top & bottom 12.7 mm width, 990 mm in length. thickness with blanket 3.5 mm for harris n 420 web offset machine ( cow brand ) 19 rubber compressible blanket 650 mm x 760 mm x 1.95 mm with bars [ 4 ply ] thickness bar size: top & bottom 14.5 mm width, 760 mm in length. thickness of bar with blanket 4.8 mm for man roland 200 sheet fed machine ( cow brand ) 20 adhesive sheets sheets  640 mm x 1020 mm x 0.20 mm for v 30 goss web offset machine ( cow brand ) 21 adhesive sheets sheets 665 mm x 990 mm x 0.20 mm for harris n 420 web offset machine ( cow brand ) 22 adhesive sheets  555 mm x 738 mm x 0.30 mm for man roland 200 sheet fed machine ( cow brand ) ( i ) green sheets 565 mm x 750 mm x 0.20 mm ( ii ) brown sheets 565 mm x 750 mm x 0.15 mm 23 engine timing setting 24 timing chain, gear & adjuster change 25 radiator cleaning after opening 26 water pump overhauling 27 engine main and big end. 28 bearing replacing and adjusting 29 replacement fly wheel ring / gear 30 replace fan belt 31 fuel pump overhauling 32 front stab. bush change 33 replacing choke & accelerator wire 34 carburetor cleaning and adjustment 35 distributor cleaning and adjustment 36 checking fuel average with one liter of petrol extra 37 removing and refitting radiator 38 cleaning radiator 39 replacing radiator hosepipe 40 replacing oil pressure pipe 41 radiator leakage repair 42 replacing ignition coil 43 replacing engine foundation / mounting each 44 coolant kit fitting 45 rear main oil leakage rectification 46 engine lathe / machine job 47 engine assy, removing & refitting with ac compression test 48 replacing cylinder head, valving grinding & top adjustment 49 replacing piston ring or piston assly, checking 50 connecting rod alignment & engine tuning ( machine jor extra ) 51 replacement fly wheel ring / gear with ac 52 remaking carburetor butterfly 53 adjusting tappets 54 grinding rocker arms 55 cylinder head ( recheck of half engine assy ) 56 replacing the accelerator cable 57 replacing timmimg cover oil seal & packing 58 replacing timimg cover oil seal & packing with ac 59 change & carburetor adjustment 60 replace engine back plate packing 61 replace valve rocket arm including tappats adjusting 62 fuel pump replacing 63 replacing choke 64 replacing fuel pump gasket 65 replacing distributor ht cable 66 spark plug cleaning, replacing and adjusting gats 67 replacing manifold gasket 68 replacing engine front plate gasket 69 replacing engine front plate gasket with ac 70 replacement cam shaft 71 con. rod bearing remove, replace, ajd, & refit 72 category 3 73 blanket reviver ( technova ) ( 5 lit. pack ) 74 novakeep gum ( technova ) ( 5 lit. pack ) 75 nova tone ( p ) for ps  plates ( 10 lit. pack ) 76 plate cleaner ( gp ) ( technova ) ( 5 lit. pack ) 77 nova delete ( p ) ( technova )   ( 100 ml bottle ) total required 600 ml` 78 nova wash ( universal ) ( technova ) ( 5 lits. pack ) 79 nova font nectar ( technova ) ( 5 lits. pack ) 80 akron gold / diamond ( technova ) sheet fed fountain solution ( 5 lits. pack ) 81 novanol xtra fountain solutions ( technova ) ( 5 lits. pack ) 82 web offset process black ink ( dic india ltd. 120000001199 ) ( 02 kg pack ) 83 kckart black rich pale gold ink ( 1 kg. ) 84 process high gloss ink metalstar quick set four colour set ( toyo ink ultra ) ( 02 kg pack ) 85 ck 0001 coloured fest tinting additive ( 1 kg pack ) 86 anti set spray powder starch based gmi free ( 1 kg. pack ) 87 ck 0001 coloured fest tack additive ( jelly type ) ( 1kg pack ) 88 replace stop light switch 89 replace front & rear brake lining ( complete set ) 90 replace brake hose & bleeding 91 complete overhauling of brake system ( master cylinder, wheel cylinders, brake line, bleeding & adjustment ) lathe job for drum tuning extra 92 brake lathe job 93 category 4 94 hotmelt adhesive book binding roller application ( hankel brand ) ( 26 kg. pack ) 95 hotmelt side glue disc ( hankel brand ) ( 20 kg. pack ) 96 replace front oil seal ( including engine remove and refit ) 97 replace rear oil seal 98 gear level replacing ( hand ) 99 replacing gear linkage ball joint each 100 adjusting gear and linkage 101 overhaul gear leakage 102 replace gear plate 103 replace gear control rod of pivot bracket 104 category 5 105 astrolong sheet for positive pasting ( 25 inch in  width, .5 thou thickness ) ( min. 200 mts. pack ) 106 tracing paper nova sharp diamond in the size of 210 mm x 297 mm / thickness 100 micron ( 100 sheet pack ) 107 tracing paper nova sharp pearl in the size of 210 mm x 297 mm / thickness 100 micron ( 100 sheet pack ) 108 category 6 109 for ( haris n 420 web offset machine ) water rubber rollers ( dia76.2 mm, length 993 mm, hardness 22±3 ) 110 for ( haris n 420 web offset machine ink rubber rollers ( dia73.2 mm, length 993 mm, hardness 22±3 ) 111 for ( haris n 420 web offset machine ink rubber rollers ( dia76.2 mm, length 993 mm, hardness 22±3 ) 112 for ( goss v 30  web offset machine ) water rubber rollers ( dia76.2 mm, length 1020 mm, hardness 22±3 ) 113 for ( goss v 30  web offset machine ) ink rubber rollers ( dia73.2 mm, length 1020 mm, hardness 22±3 ) 114 propeller shaft overhaul 115 replace propeller shaft rubber cuppling 116 fuel tank 117 remove, clean & refit fuel tank 118 replace petrol tank hardboard cover 119 replace fuel tank hose pipe 120 replace petrol flexible pipe ( each ) 121 electrical 122 battery recharging 123 alternator overhauling 124 self starter overhauling 125 horn tune up ( each ) 126 indicator repairing 127 speedometer cable change 128 wiper machine overhauling 129 general electrical check up 130 complete front wiring change 131 head light bulb changing and focusing the light 132 wiper arm / blade replace each 133 replacing head light switch 134 replacing fuel meter 135 replacing side & tail light bulb ( each ) 136 replacing head light bulb ( each ) 137 replace stop light switch 138 replace dash board bulb 139 replace flasher unit / horn relay ( each ) 140 horn ring assy. o / h 141 change complete front, rear wiring 142 coolent system fitting 143 body 144 door lock removing, repair, replace, adjustment ( each ) 145 door glass machine overhauling 146 door glass machine electric overhauling 147 door glass change 148 dickey lock repairing 149 replace door gola set 150 replace door rubber beading change 151 padding of front seat ( each ) 152 door hinge pins repairing / replace each door 153 removing & replacing rear wind screen glass / rubber 154 removing & replacing front wind screen glass / rubber. 155 replace bonnet hinges each 156 removing / replacing / repairing ventilator window ( each ) 157 remove & refitting of new hard board each door 158 padding of rear seat ( each ) 159 removing and replacing front grill 160 seat, roof & carpet dry cleaning / inside dry cleaning 161 removing, repair, adjustment door hand ( each ) outer 162 making front door hinge pin each door 163 remove, replace, repair door glass window machine ( each ) 164 quarter glass each 165 setting ventilator tension / spring 166 replace quarter ventilator glass ruber 167 replace ventilator glass ( each ) 168 replace door lock set 169 replace door channel set 170 replace door handle cup 171 replace dicky hinge each 172 re chrome plating centre piece ( without any dent ) 173 re chrome plating front / rear bumper each 174 replace door beeding set 175 remove / refitting of new rexine of front seat ( material extra ) 176 replace front fender 177 replace door assy. front 178 replace door assy. each 179 replace glove box ( each ) 180 replace complete floor & welding ( parts extra ) 181 front grill modification 182 replace running board & welding ( parts extra ) 183 remove & refit dash board 184 replace dicky weather strip 185 remove / refitting of new rexine of rear seat 186 remove / refitting of new rexine of each door 187 replace front bumper assy. 188 replace reart bumper assy. 189 replace bonnut assy. and lock setting 190 replace bumper side rubber 191 replace rear bumper centre rubber 192 replace grill outer shell 193 replace bumper over rider ( each ) 194 replace front cross member 195 clutch 196 clutch adjustment 197 overhauling / replace clutch plate assy. 198 replacing clutch adjusting rod 199 clutch overhauling 200 replacing clutch & brake paddle 201 replace clutch carbon & bearing 202 replace pressure plate adjuting fingers 203 replace hosing cross members 204 clutch o / h with ac 205 o / h / replace clutch plate assy. / facing when engine assy. is out 206 replace clutch hosing shaft / bush 207 replace clutch hosing shaft bush fitted with ac 208 change clutch cable 209 air conditioning system 210 general servicing of ac 211 gas filling 212 removal of ac in the car 213 fitting of ac in the car 214 ac compressor repair 215 painting 216 complete painting ( same colour dent extra ) 217 complete painting ( sherry new / red ) 218 complete painting different colour 219 repainting each section wise door, dicky, mudguard etc. 220 repainting each section wise door, dicky, mudguard ( new sherry ) 221 complete painting ( flash / outer body / without any dents ) 222 complete painting after scrapping old paint ( without any dents ) 223 repainting luggage carrier 224 repainting wheel rim 225 repainting roof 226 repainting bonnut 227 paint bumber fiber / dlx 228 any items other than mentioned above 229 statement of cost of spare parts 230 engine overhauling ( oh ) 231 engine decarbonising 232 cylinder head gasket change 233 engine tuning including tapper 234 timing chain change 235 radiator cleaning 236 replacing oil pressure pipe 237 replacing engine foundation 238 rear main oil seal 239 general brake o h 240 brake lining cleaning 241 replacing rear brake drum each 242 replacing front brake drum each 243 replacing tmt oil seal each 244 replacing hand brake cable 245 replacing master cylinder 246 gear box assy overhauling 247 replacing front oil seal 248 gear lever replacing 249 replacing steering assy. ( wheel ) 250 steering overhauling complete 251 replacing top & bottom bushes 252 replacing ball joint 253 replacing colour boot each 254 complete front suspension overhauling 255 complete rubber bush kit replacing 256 replacing rear spring coil assby 257 torsian bar replacing 258 differential overhauling 259 rear excel bearing ( one side ) 260 shaft joint changing each 261 tank clean 262 petrol flexible pipe 263 altinator overhauling 264 self starter overhauling 265 speedometer cable 266 wiper motor overhauling 267 front wiring change 268 wiper blade each 269 head light assembly 270 back light assembly 271 indicator assembly 272 replacement of air cleaner element 273 door glass 274 dicky lock 275 all door gola change 276 door rubber beeding 277 front wind screen rubber 278 clutch overhauling 279 silencer pipe replacement 280 new exide battery ( with return of old battery ) 281 new exide battery ( without return of old battery ) 282 water pump assembly 283 ignition coil 284 complete set of loose seat covers 285 complete set of curtains 286 all door panel change ( with lamination ) 287 wheel bearing ( front ) 288 wheel bearing ( rear ) 289 complete foot set mats 290 complete carpet set 291 wheel covers 292 perfume 293 steering cover 294 number plate change ( one ) 295 number plate change ( both ) 296 watch 297 shockers ( front ) 298 shockers ( rear ) 299 kamani overhaul 300 disc pads 301 timing belt / bearing 302 popular shaft 303 amphlifier 304 horn set 305 film on window glasses 306 mudguard mirror 307 catalytic convertor 308 accelator wire 309 fuse box 310 door lock ( one side ) 311 door lock ( complete set ) 312 bead seat 313 running board dent & paint 314 namda on all doors 315 one set curtail magnet 316 dash board lock change 317 wheel alignment and balancing 318 rubbing polish 319 one set loose seat cover ( towel ) 320 fire bottle 321 gear lock assembling 322 perfume 323 carpet type full mat 324 door wiser 325 door guard and bumper guard 326 wheel alignment & balancing 327 vip red light 328 front bumper repair and painting 329 oil filter, fuel filter, air filter 330 caliper packing bond spray 331 brake disk lock 332 brake shoe set with adjuster kit 333 brake caliper rubber kit set 334 body shiner 335 replacement of ignition coil 336 desh board assembling 337 complete new model automatic folding curtain set 338 roof new velvet super 339 brake disk lock 340 brake shoe set with adjuster kit 341 new exide battery 342 battery braket wire 343 a / c ducting wiring with a / c valve filter 344 injector cleaning with ring 345 power window switchs with wiring 346 both tail light 347 pressure jack 348 replacement of ecu 349 replacement of sensor 350 replacement of fuel pump assy 351 thermostar valve 352 rear shocker spring coil pad 353 rear shocker mounting assembly 354 o / h of disc brake 355 replacement of tp sensor 356 replacement of fuel pump fuse 357 disc brake pad cleaning 358 silencer repair 359 thermostat valve change 360 engine jerks during acceleration & de acclrtn. 361 1 ltr. gear box oil 362 oil filter, fuel filter, air filter 363 ignition plug 364 1 ltr. engine oil 365 excessive exhaust emission 366 cng overhauling 367 erratic idling 368 replacement of fuel hose each 369 replacement of ignition emplifier 370 replacement of mpfi relay each 371 replacement of air cleaner hose 372 replacement of ecu 373 replacement of mar sensor 374 replacement of tp sensor 375 replacement of speed sensor 376 replacement of temp. sensor 377 replacement of lamda sensor 378 replacement of ac connection 379 replacement of ac fuse 380 replacement of fuel pump fuse 381 replacement of thermostat valve 382 brake overhaul 383 cleaning injector rail 384 injector cleaning ( after removing fuel rail ) each 385 replacement of inlet manifold ( including plenum ) 386 radiator coolent change 387 mpfi system ckeck 388 magnetic curtain one set 389 new altinator assy. with fitting 390 fog light set 391 engine tuning and injector clean 392 steel guard front, rear and side guard set 393 petrol pipe set 394 injector service chips programming 395 compressor bracket assy. 396 ac blower service ducting & wiring check 397 petrol filter 398 ignition plug 399 thinner nc 400 wheel alignment & balancing 401 all light check up 402 steering boot 403 column bolt 404 soft cupling fitting 405 cross fitting 406 carbon set 407 self bush fitting 408 labour cng tuning & repair 409 kamani opening fitting tension 410 complete body denting and painting 411 clutch new set with fitting 412 complete inside seat upholstery full dx valvet 413 woolen carpet 414 rear guard new 415 new dicki with full carpet floor 416 excilator & clutch wire change 417 mudguard flap set 418 gear liver boot 419 family lock kit 420 grill fan assy with relay 421 consol box valvet 422 seat cover full set with padding 423 seat foundation new making 424 steering mutha 425 one set half cover 426 spark plug 427 gola pin bush set 428 light adjuster 429 one head rest with cover 430 kamani bush pad 431 cuppling fitting 432 bumper leg guard rubber set...

Due Date : December 22, 2020

Tender Value : ₹ Ref. Documents

View Tender
18
Indian Army - Delhi

24846235 supply of dept of opthalmology: 2 cannula, air injection, high craft style 27 / 30 g 3 ophthalmic surgical drapes with drainage pouch ( 100 x 70 / 75 cms ) 4 needle, atraumatic 6 mm 3 / 8 circle, spatulated, micro point10 / 0 nylon monofilament, pkt of 12. 5 needle, atraumatic 6mm 3 / 8 circle, spatulated, micro point polymide monofilament, 9 / 0 pkt of 12. 6 needle, atraumatic 6mm 3 / 8 circle, spatulated, micro point polymide monifilament, 8 / 0 pkt of 12. 7 needle, atraumatic 8mm 3 / 8 circle, reverse cutting micro point gut plain, 6 / 10, pkt of 12. 8 ctr ( capsule tension rings ) 9 disposable iris retractor for stretching small pupils 10 sodium hypochlorite solution 10% 11 mecetronium + 2 propanol + 1 propanol hand rub 12 hiv surgery packs for ophthalmology. pack of drapes for hiv patients with disposable cataract surgery instruments 13 disposable sterile surgical gown of smms fabric with 2 hand wipes size large 14 disposable sterile surgical gown of smms fabric with 2 hand wipes size medium 15 disposable surgical gown reinforced with high fluid protection abrasion resistance with level 4 liquid barries standards ( presterile ) ( small ) with two hand towels 16 trolley drape for ophthalmology. 100x 120 cm , pe material, eto sterilized. single layer, must satisfy astm criteria. must be waterproof , must not tear on pinching. 17 balanced salt solution plastic pouch, balanced salt solution plastic pouch, isotoniic sterile irrigating solution with ph 7.5 and osmolality 300mosm / kg in clear polypropylene bag with a grey butyl stopper and aluminium seal. should be able to withstand 60 mmhg pressurisation. 18 sterile eye wipes lubricated with water and 0.9% nacl 19 vicryl 6 / 0 suture. synthetic braided coated polygalactin 910 violet coated with polycaprolate size 6 / 0, 30 cms, 3 / 8circle micropoint 08 mm spatulated micropoint needle, double armed. item will be used during surgery and evaluated for needle tip snagging, ease of manipulation, tissue snagging and brakage . those items causing any of these issues wil be rejected 20 prolene 10 0.double armed, straight needle. item will be used during surgery and evaluated for needle tip snagging, ease of manipulation, tissue snagging and brakage . those items causing any of these issues wil be rejected.non absorbable sutures with good tensile strength.does not undergo hydrolytic degradation and therefore long lasting.for iris repair and scleral fixation iol 21 6 0 mersilk 0 mersilk 10mm, 3 / 8 circle, round bodied silk black braided, silicone coated, suture length 36cm. item will be used during surgery and evaluated for needle tip snagging, ease of manipulation, tissue snagging and brakage . those items causing any of these issues wil be rejected 22 5 0 mersilk 5 0 mersilk 10mm, 3 / 8 circle, round bodied silk black braided, silicone coated, suture length 76cm. item will be used during surgery and evaluated for needle tip snagging, ease of manipulation, tissue snagging and brakage . those items causing any of these issues wil be rejected 23 disposable silicone sleeve 70, 2.1x 1mm disposable silicone sleeve 70, 2.1x 1mm only usfda or ce certified items will be accepted 24 soft tip needle 27g .disposable 27g, 30mm needle with soft silicone tip. only usfda or ce certified items will be accepted.required for vitreoretinal surgery for injecting dyes, trriamcinolone. no is specifications avaiolable for this item 25 microsurgical instrument retinal hydrodissection cannula 38g. 38 g , 23 / 25g shaft tapers to 38 g needle. i.d flexible tip. 32mm long ( 1.3 inch ) . i.d flexible tip. 32mm long ( 1.3 inch ) . for subretinal injection of dye, tpa, anti vegf 26 preloaded disposable ctr injector, size 13 / 11 or 12 / 10 27 26g ½” needle , 100 per box, sterile individually packed 28 30g ½” needle , 100 per box, sterile individually packed 29 anterior chamber intraocular lens single piece rigid ( kelman multiflex ) 30 disposable i / a tubing for zeiss visalis 100, disposable i / a tubing set part no 303060 0200 000 must be manufactured by the original manufacturer of the equipment . usfad or ce approved. all samples wil be tested to ensure they are from the original manufacturer of the equipment and are of the correct part number . 31 handpiece for zeiss vislais 1000 phacoemulsification machine, ulite phaco hand piece 32 disposable phaco tips 30 degree compatiable with existing phaco emlsifier zeiss visalis 100, 15 degree tip part no 303060 0101 000 33 sleeve for disposable phaco tips 30 degree compatiable with existing phaco emlsifier zeiss visalis 100, 30 degree tip, part no 303060 0101 000 34 anterior chamber maintainer 20 g with roughened tip, 3.5 mm cannula with bevelled tip and unique annular rings for anterior chamber self retention , overall length 12 mm, with silicon tubing 200mm long with adaptor. 35 sterile disposable canula 25g for irrigation , 25 g* 0.875 inches ( 0.50 * 22mm ) angled 04 mm from the end irrigating canula 36 sterile disposable canula 27g for irrigation , 27 g * 0.875 inches ( 0.40*22 mm ) angled 04 mm from the end irrigating canula 37 keratoprosthesis, permnaent sterile pack, made up of pmma, based on boston design, consisting of three parts i.e. front plate with stem, back plate and lock ring 38 punctum plugs, each pkt containing 2 sterile plugs, made up of implant grade silicone, premounted on a disposable inserter / dilator, on depressing the knob on the inserter, plug should get released easi 39 ahmed glaucoma valve fp 8 valved plate body medical made silicon, drainage tube medica lmade silicon , valve membrane medical made silicon , surface area 96 mm2 , valve thickness 0.9 mm, tube length 25 mm 40 ahmed glaucoma valve pc 7 , valved plate body medical made silicon, drainage tube medica lmade silicon , valve membrane medical made silicon , surface area 184 mm2 , valve thickness 0.9 mm, tube length 25 cm 41 sterile surgical skin marker for skin and corneal marking 42 hydroxyapatite orbital implants post evisceration, biointegrated, post evisceration, size10mm, 12mm, 14mm, 16mm, 18mm, 20mm and 22mm 43 preloaded punctal plugs for dry eyes 44 sizers for assessing orbital implant size post evisceration / enucleation sizes 12 mm, 14 mm, 16 mm, 18 mm, 20 mm, 22 mm 45 bioceramic orbital implant post evisceration / enucleation sizes 12mm, 14mm, 16mm, 18mm, 20mm, 22mm 46 flexible conformers for adult sockets of sizes 16mm, 18mm, 20 mm , 22 mm, 23mm , 24 mm, 25mm 47 flexible conformers for paediatric sockets sizes 12mm, 14mm 48 povidone iodine solution 10% 500ml bott 49 sterile, powder free, latex micro textured disposable surgical gloves size 7.5 50 sterile, powder free, latex micro textured disposable surgical gloves size 8 51 povidone iodine solution 5% bottle of 100 ml 52 povidone iodine surgical handwash 53 intracath size 18 g 54 intracath size 20 g 55 microscope bulb 12v 150w philips 56 bulb for carl zeiss slit lamp biomicroscope, 6v, 20w 57 bulb for carl zeiss fundus camera, 12v, 50w 58 bulbs for infrared ( 810nm ) , micropulse, long pulse laser with slit lamp delivery system 59 bulb for operating microscope ophthalmic model om 5 15v, 150w 60 bulb for operating microscope ophthalmic model opmi visu 200 : 12v, 75w 61 bulb for operating microscope ophthalmic with focus control model om 9: 12v, 100w 62 bulb for indirect ophthalmoscope heine 06v 63 bulb for appasamy yag laser slit lamp, 12v, 30w 64 bulb for slit lamp with std access model xcel 700, 6v, 12w 65 bulb for hag streit slit lamp 6v, 4.5w 66 eye bank specular microscope: h p laserjet professional p 1108 ( black ) cartridge 67 iol master: hp laser jet p1007, cartridge no turner 88a ( black ) 68 oct: printer product no c2282b, cartridge no 685 n ( pink, blue, yellow and black ) 69 fundus camera: hp desk jet ink 5525, catridge no 685 n ( pink, blue, yellow, and black ) 70 ubm: hp desk jet d 4368, catridge no 860 black &861 color 71 ultrasound ab scan: hp laser jet p1108, 070283, cartridge black 72 automated perimeter visual field analyser, tuner tn 3250 73 45 degree groove knife microsurgical knife for cataract and pterygium surgery. for cataract and pterygium surgery. during surgery, there should be no movement of the eye while making incisions under topical anaesthesia. should make incision without needfor counter pressure. incision should be horizontal, slit without any traingulation of the flap. blade should have incision length m 74 knife bard parker, blade size 1 fitting ( commercial no. 11 ) packet of 6 sterile 75 knife bard parker, blade size 1 fitting ( commercial no. 12 ) packet of 6 sterile 76 knife bard parker, blade size 1 fitting ( commercial no. 15 ) packet of 6 sterile 77 adhesive plaster micro porous tape 1 inch box of 12 78 adhesive plaster micro porous tape 2 inches box of 6 79 adhesive plaster micro porous tape 3 inches box of 4 80 gauze absorbent, folded : 1 cm x 100 metres 81 gauze absorbent, folded : 2.5 cm x 100 metres 82 gauze surgical, open wove, unmedicated: 60 cm wide x 18 metres 83 pad abdominal swab 40 x 25 cm with tape, 30 cm 84 surgeons caps disposable 85 surgeons mask disposable 86 disposable artificial anterior chamber 3 piece with base having two ports with silicone tubing for injecting viscoelastic, bss, air and can hold cornea 14 18mm diameter along with companion vacuum trephine. 87 disposable corneal punch 2 piece design diameter 7 9.5mm with ultrashort preloaded blade and a spring loaded syringe having four cardinal holes and 20 vacuum holes. 88 tonometer prisms, plastic disposable for haag streit pattern tonometer 89 tonometer prisms, plastic disposable for zeiss pattern tonometer 90 mesh wrapped bioceramic orbital implant 91 lester jones tube, lester jones tube, made up of pyrex, 19 to 23mm, for onjunctivodacryocystorhinostomy 92 polyvinylpyrrollidone ( pvp ) preloaded perforated punctal plugs for punctal stenosis 93 lacrimal intubation sets silicon 94 eye lid weights gold plated 95 poly tetra fluoro ethylene ( ptfe ) strip for ptosis surgery two sizes width 2mm, 3mm 96 operating pack containing : sheet large 3, trolley cover 2, surgeon gown 4 97 three way stop cock ( plastic ) 98 strip indicators for sterilisation control ( for testing sterility of drums ) 99 intra ocular lenses single, multi pieces j / c loop, uv absorbed, powers 17 d to 23 d. 100 ot table cover. size 100cmsx 225cms. made of biosorb gel, size 100cmsx 225cms, non woven disposable apparels.required to cover ot tables, to prevent contamiantion. 101 disposable scleral encirclage 40 style.2mmx0.75mm. 125mm long. style.2mmx0.75mm. 125mm long. only usfda or ce certfied items will be accepted. 102 disposable scleral buckle number 277, 2.5mm width x 9.0 x 7.mm groovedisposable scleral buckle number 277, 2.5mm width x 9.0 x 7.mm groove only usfda or ce certified items will be accepted 103 sterile disposable micropore filter.sterile, endotoxin free 0.2micron pes filter endotoxin free 0.2micron pes filter media for ultrafiltration of gas and injections ( micropore filter ) 104 incision enlarger blade 5.2 for topical cataract surgery, angled 5.2mm short cut implant knife, 6 per box. during surgery, there should be movement of the eye while making incisions under topical anaesthesia. should make incision without needfor counter pressure. incision should be horizontal, slit without any traingulation of the flap. blade should have incision length marker. 105 capsular hook, made up of nylon / polypropylene, angled hook for holding capsule in subluxated cataracts. hook should have a blunt end and shouldnt bend when applied 106 syringe 1 ml with detachable 30 g or 26g needle ( sterile ) , the syringe should be sterile, individually packed with a removable attached needle and markings in 10 divisions per ml. 107 aniridia iol. pmma 4.0mm, optic, 9.0 mm bod, c loop 13.75mm overall dia, a constant 118.5 to 119 , ac depth 4.9mm, dioptric powers 1.0 30 d , colour brown 108 scleral fixated iol. optic diameter 6.5 mm, optic design equiconvex, haptic design modified c loop , acd 5 mm, diopter range 6 d to 30 d and also 15 to 25 d in 0.5 d steps, lens material uv absorbing pmma with 2 loops in the haptics at 180 degrees. a constant 118.5 109 scleral contact lens, large diameter gas permeable lenses, vaulting over entire corneal surface resting on sclera, should be stable, easy to insert, comfortable, should not dislodge on its own 110 riboflavin 0.1% iso osmolar solution for ophthalmic use for corneal collagen cross linking 111 riboflavin 0.1% hypo osmolar solution for ophthalmic use for corneal collagen cross linking 112 rigid conformers for adult sockets right and left conformer ranging from 16mm, 18mm, 20 mm , 22 mm, 23mm , 24 mm, 25mm 113 rigid conformers for paediatric sockets sizes 12 mm, 14 mm ( pack of three of each size ) 114 artificial eyes ( stock eyes ) , 115 mini monoka monocanalicular intubation set 116 sterile, powder free, latex micro textured disposable surgical gloves size 6.5 117 sterile, powder free, latex micro textured disposable surgical gloves size 7.0 118 self inflating tissue expanders hydrogel, for expanding orbital volumesphere of different volume 1ml, 2ml, 3ml, 4ml, 5ml...

Due Date : July 29, 2020

Tender Value : ₹ 58.01 Lakhs

View Tender
19
Indian Army - Delhi

23905198 supply of opthal ( consums ) 1 opthal ( consums ) 2 cannula, air injection, high craft style 27 / 30 g 3 ophthalmic surgical drapes with drainage pouch ( 100 x 70 / 75 cms ) 4 needle, atraumatic 6 mm 3 / 8 circle, spatulated, micro point 10 / 0 nylon monofilament, pkt of 12. 5 needle, atraumatic 6mm 3 / 8 circle, spatulated, micro point polymide monofilament, 9 / 0 pkt of 12. 6 needle, atraumatic 6mm 3 / 8 circle, spatulated, micro point polymide monifilament, 8 / 0 pkt of 12. 7 needle, atraumatic 8mm 3 / 8 circle, reverse cutting micro point gut plain, 6 / 10, pkt of 12. 8 ctr ( capsule tension rings ) 9 disposable iris retractor for stretching small pupils 10 sodium hypochlorite solution 10% 11 mecetronium + 2 propanol + 1 propanol hand rub 12 hiv surgery packs for ophthalmology. pack of drapes for hiv patients with disposable cataract surgery instruments 13 disposable sterile surgical gown of smms fabric with 2 hand wipes size large 14 disposable sterile surgical gown of smms fabric with 2 hand wipes size medium 15 disposable surgical gown reinforced with high fluid protection abrasion resistance with level 4 liquid barries standards ( presterile ) ( small ) with two hand towels 16 trolley drape for ophthalmology. 100x 120 cm , pe material, eto sterilized. single layer, must satisfy astm criteria. must be waterproof , must not tear on pinching. 17 balanced salt solution plastic pouch, balanced salt solution plastic pouch, isotoniic sterile irrigating solution with ph 7.5 and osmolality 300mosm / kg in clear polypropylene bag with a grey butyl stopper and aluminium seal. should be able to withstand 60 mmhg pressurisation. 18 sterile eye wipes lubricated with water and 0.9% nacl 19 vicryl 6 / 0 suture. synthetic braided coated polygalactin 910 violet coated with polycaprolate size 6 / 0, 30 cms, 3 / 8circle micropoint 08 mm spatulated micropoint needle, double armed. item will be used during surgery and evaluated for needle tip snagging, ease of manipulation, tissue snagging and brakage . those items causing any of these issues wil be rejected 20 prolene 10 0.double armed, straight needle. item will be used during surgery and evaluated for needle tip snagging, ease of manipulation, tissue snagging and brakage . those items causing any of these issues wil be rejected.non absorbable sutures with good tensile strength.does not undergo hydrolytic degradation and therefore long lasting.for iris repair and scleral fixation iol 21 6 0 mersilk 0 mersilk 10mm, 3 / 8 circle, round bodied silk black braided, silicone coated, suture length 36cm. item will be used during surgery and evaluated for needle tip snagging, ease of manipulation, tissue snagging and brakage . those items causing any of these issues wil be rejected 22 5 0 mersilk 5 0 mersilk 10mm, 3 / 8 circle, round bodied silk black braided, silicone coated, suture length 76cm. item will be used during surgery and evaluated for needle tip snagging, ease of manipulation, tissue snagging and brakage . those items causing any of these issues wil be rejected 23 disposable silicone sleeve 70, 2.1x 1mm disposable silicone sleeve 70, 2.1x 1mm only usfda or ce certified items will be accepted 24 soft tip needle 27g .disposable 27g, 30mm needle with soft silicone tip. only usfda or ce certified items will be accepted.required for vitreoretinal surgery for injecting dyes, trriamcinolone. no is specifications avaiolable for this item 25 microsurgical instrument retinal hydrodissection cannula 38g. 38 g , 23 / 25g shaft tapers to 38 g needle. i.d flexible tip. 32mm long ( 1.3 inch ) . i.d flexible tip. 32mm long ( 1.3 inch ) . for subretinal injection of dye, tpa, anti vegf 26 preloaded disposable ctr injector, size 13 / 11 or 12 / 10 27 26g ½” needle , 100 per box, sterile individually packed 28 30g ½” needle , 100 per box, sterile individually packed 29 iris claw lens pmma iris claw lens, overall size 8.0 / 8.5mm / 9.0mm , optic size 5.2 / 5.4 / 5.6mm, biconvex, a constant 115 to 116.0, dioptric power ranging from 2d to +30 d ( 1d increments ) , +14.5 to +24.5d ( 0.5d increments ) 30 anterior chamber intraocular lens single piece rigid ( kelman multiflex ) 31 disposable i / a tubing for zeiss visalis 100, disposable i / a tubing set part no 303060 0200 000 must be manufactured by the original manufacturer of the equipment . usfad or ce approved. all samples wil be tested to ensure they are from the original manufacturer of the equipment and are of the correct part number . 32 disposable phaco tips 30 degree compatiable with existing phaco emlsifier zeiss visalis 100, 15 degree tip part no 303060 0101 000 33 sleeve for disposable phaco tips 30 degree compatiable with existing phaco emlsifier zeiss visalis 100, 30 degree tip, part no 303060 0101 000 34 anterior chamber maintainer 20 g with roughened tip, 3.5 mm cannula with bevelled tip and unique annular rings for anterior chamber self retention , overall length 12 mm, with silicon tubing 200mm long with adaptor. 35 sterile disposable canula 25g for irrigation , 25 g* 0.875 inches ( 0.50 * 22mm ) angled 04 mm from the end irrigating canula 36 sterile disposable canula 27g for irrigation , 27 g * 0.875 inches ( 0.40*22 mm ) angled 04 mm from the end irrigating canula 37 keratoprosthesis, permnaent sterile pack, made up of pmma, based on boston design, consisting of three parts i.e. front plate with stem, back plate and lock ring 38 punctum plugs, each pkt containing 2 sterile plugs, made up of implant grade silicone, premounted on a disposable inserter / dilator, on depressing the knob on the inserter, plug should get released easi 39 ahmed glaucoma valve fp 8 valved plate body medical made silicon, drainage tube medica lmade silicon , valve membrane medical made silicon , surface area 96 mm2 , valve thickness 0.9 mm, tube length 25 mm 40 ahmed glaucoma valve pc 7 , valved plate body medical made silicon, drainage tube medica lmade silicon , valve membrane medical made silicon , surface area 184 mm2 , valve thickness 0.9 mm, tube length 25 cm 41 sterile surgical skin marker for skin and corneal marking 42 hydroxyapatite orbital implants post evisceration, biointegrated, post evisceration, size10mm, 12mm, 14mm, 16mm, 18mm, 20mm and 22mm 43 preloaded punctal plugs for dry eyes 44 disposable lacrimal probes with blunt tip different sizes 00, 1, 2, 3, 4, 5 45 sizers for assessing orbital implant size post evisceration / enucleation sizes 12 mm, 14 mm, 16 mm, 18 mm, 20 mm, 22 mm 46 bioceramic orbital implant post evisceration / enucleation sizes 12mm, 14mm, 16mm, 18mm, 20mm, 22mm 47 flexible conformers for adult sockets of sizes 16mm, 18mm, 20 mm , 22 mm, 23mm , 24 mm, 25mm 48 flexible conformers for paediatric sockets sizes 12mm, 14mm 49 povidone iodine solution 10% 500ml bott 50 sterile, powder free, latex micro textured disposable surgical gloves size 6.5 51 sterile, powder free, latex micro textured disposable surgical gloves size 7.0...

Due Date : March 18, 2020

Tender Value : ₹ 20.28 Lakhs

View Tender
21
Indian Army - Delhi

22529789 supply of non exp medical stores ( pvms 040193 sterisliser, steam high pressure, horizontal, cylindrical, size 500mm dia x 1100mm ( ss ) chamber, jacket, end ring, back plate and steam generator, with one gun metal door dished or reinforced electrically / kerosene stove heated complete with desealer and pressure stove with burners complete ) ...

Due Date : December 05, 2019

Tender Value : ₹ Ref. Documents

View Tender
22
Cantonment Board - Delhi

21576279 term contract for purchase of furniture items1 operation theatre table nmechanical or hydraulic operation; must have radio lucent top, 180 to 200 cm length and 50 80 cm wide with radio lucent mattress; must have a provision to include x ray plate below and provision for trendelenburg and lateral tilt of 30 40 degrees, an elevation of 70 to 120 cm and should be on castors with brake supporters and should have a head and back section and kidney position break with two arm boards and scapular and arm support for thoracic operations. details of accessories should be provided. complete accessories for thyroid, urologic, thoracic, jack knife, trendelenburg lithotomy positions preferably with gel pads for head rests and pressure points. n 2 minor o.t. table n* three folding with adjustable head and foot rest. n* size: 180cms long x 50cms wide x 80cms high ( 72” x 20” x 32” ) . n* the central section should be adjustable for trendelenberg positions. n* material body – stainless steel. n* leg holders of stainless steel n* unit shall conform to relevant safety standards and general safety standards for medical equipment as per is:8607. 3 linen distribution trolley n1. dimensions app: 1500 x 600 x 1200mm with three adjustable shelves plus base. n2. sturdy steel frame and shelves aluminium clad, nwith inset push handles fitted at both ends, pvc nbumper bar and name tags n3. safety folds to all edges n4. push handle at both ends n5. 125mm castors 4 hi lo icu bed s.s. with mattress nthe general requirement shall be as per is 9395 1979 nframe: main frame work and chariot base frame work of rectangular s.s. tubular argon are welded construction, bows of round s.s. tubular construction. ntop: four section top made from uniformly perforated s.s. sheet ( 16 gauge ) 04 cr 18 ni 10 or 07 cr ni 9 as per is–6911 1972. head raise knee rest trendelenburg and reverse trendelenburg position maneuvered by smooth crank. height adjustment to facilitate close observation by medical staff and convenient transfer of patient from bed to trolley & vice versa. height adjustment achieved with ease on smooth crank mechanism. detachable stainless steel ahead and leg bows fitted with laminated panels. detachable full length stainless steel collapsible side railing & rubber buffers to absorb shock. stainless steel telescopic saline rod with four locations. n ncastors: 12.5cms ( rubber / nylon ) swiveling type castors fitted to the chariot base, two castors to have brake for locking. n ndimension: overall length 2250mm suitable for mattress of 2010mm length. overall width 1015mm suitable for 100mm thick mattress width of 910mm. sleeping level adjustable between 620mm and 820mm. n nmaterial: s.s. sheets – 4 sectional top of 04 cr 18 ni 10 or 07 cr 18 ni 9 designation as per is 6911 1972 n nrectangular tubes ( s.s. ) n nfor outer frame 60 x 30 x 16g thickness and horizontal transverse member 19 x 38 x 16g. backrest horizontal and knee rest horizontal member of 50 x 25 x 16g for chariot frame base of 60 x 25 x 16g. n nround tubes ( s.s. ) n nfor bow outer member 31.7 dia x 18g s.s. tubes of 304 quality. screw mechanism of 31.75 dia x 18g and 38mm dia x 18g s.s. tubes chariot base castor receipt tube of 31.75 dia x 9 backrest and leg rest of 25.4mm x 18g tube. n nperformance test under a load of 200kgs n ntest : it shall be as per is 4033 n 1068 6.1.1 & 6.1.2 & 8 of is n 9395 1979 n n nobservation : no plastic deformation takes place i.e. bed to come back to its original height within ( + ) 5mm tolerance. n nfinish : in good quality durable rust free finish n nmarking : as per 11 of is 9395 1979 n 5 bedside locker ( s.s. ) n nthe bed side locker shall be generally conform to is 4266 1967, subject to the following specifications: n nframe : it shall be according to 2.1 of is 4033 1968. body of sheet metal welded construction. locker made from machine pressed crca sheet locker box with door and lock. n ntop : shall be according to 2.2 ( a ) & 22 ( b ) of is 4033 1968. high impact, enclosed on three sides, having one box & one drawer plastic top with raised edges on three sides. super imposed s.s. top 04 cr 18 ni 10 or 07 cr 18 ni 9 of is 6911 1972. n ncastors : mounted on 2 ball type 50mm dia swiveling castors as per is 4034 1979 and two stumps. n nshape & dimension : overall length 405mm width 405mm height 810mm as per figure of is 4266 1967. n nmaterial : body, door & drawer made of 20 gsm crca sheet and top made of 24 gss sheet. superimposed on plywood top of 12mm thick. n nfinish : as per 5 of is 4033 1963 & for top light finish passivated. n 6 attendant stool n* top size ( 457mm + / 5mm ) x ( 305mm + / 5mm ) x ( 25mm ) . height ( 457mm + / 5mm ) legs ( 4 ) 1 3 / 4 “ ( 44mm ) finished section with cross bars ( 51mm ) x ( 25mm ) at top and bottom cross bars. n* the stool should be made out of ms angle frame epoxy powder coated in white colour with minimum 50 microns. n* the above product should conform to applicable isi standard in respect of materials, welding process, test & performance. conforming to is 4033 standard or equivalent. 7 bedside table ( adjustable ) nthe general requirements shall be as per is 4033 1968 n nframe : basic frame of rectangular tube welded construction. top frame tubular welded constructions and stems of sheet metal fabrication or any other reputed design. n ntop : laminated board in two piece construction. n ncastors : rolling cum swivelling castors ( 4 nos. ) as per is 4034 1979. n nshape & dimension : overall length 760mm l x 350mm w and height adjustable from 750 770mm to 1050 – 1070mm ( approx. ) . n nmaterial used: base frame of rectangular tube of 30 x 60 1.6mm top frame of square tube of 25 x 25 x 1.25mm and stem made from 14g crca sheet of is 513 d quality. n nfinish : pretreated and powder coating 60 micron thickness. n ntest : as per is 4033 1968 & latest amendments issued if any. n nmarking : as per is 6207 1971 & latest amendments issued if any. n 8 bed side screen ( three fold ) n* over all size ( w 2438 + / 10mm x h 1524 + / 10mm ) . design: ¾” ( 9mm diameter tubular frame 16 swg in sections. middle span ( 1219mm ) . n* a ½ inch thick rod with one end having axial joint and other end having provisions for holding the curtain rod in a horizontal manner in a channel at the top and bottom of each section of the screen. mounted on 8 nos. 2” ( 51mm ) nylon castors. 4 middle section. 2 each for side portion. n n* epoxy poster coated in white colour with minimum 50microns. the above product should conform to applicable isi standard is 4458 in respect of materials, welding process, test & performance. conforming to is 4458 standard or equivalent. it should be stable. n n* accessories: contain cloth – sky blue in opaque, lightweight, shrink resistant / pre shrink, durable and suitable for frequent laundering. n 9 fowler’s bed with mattress n• bed size n204 – 206 ( l ) x 90 – 92 ( w ) x 54 – 56 ( h ) cms n• mechanically operated 4 sections, through crank mechanism, collapsible handle permanently attached to the screw. n• top crms perforated 16 gauge. n• smooth crank mechanism at the foot and panel to obtain head rise upto 80oc and knee fold upto 35oc. n• frame tubular rectangular frame, u / h shaped less on four 125cms swivel castors ( nylon / rubber ) two with brakes head and legs ss bows with laminated panels corners buffers and mattress guards, four locations of drip rod. n• mattress 10cms covered with stain proof foam leather. n• pretreated and powder coated – 50 micron. n• spare two wheels, one with a brake, a set of corner rubbers ( 4 ) , two iv rods. n• in house quality test certificate to be provided with each bed. n 10 semi fowler beds with mattress n• bed size n204– 206 ( l ) x 90 – 92 ( w ) x 54 – 56 ( h ) cms n• two section operated smoothly through crank mechanism at the foot, collapsible handle permanently attached to the screw. n• frame tubular rectangular, supported on four legs, u / h shaped legs, fitted with four 12.5cms swivel coolers, two with brakes, to be provided with mattress guards and four locations for iv rod. n• detachable foot, head & ss bows with laminated panels. n• pretreated and epoxy coated. n• spare two castors, one with a brake and two iv rods. n• in house quality test certificate to be provided with each bed. n 11 baby craddle ncrib size: 76 l x 42 w cms. nht. to crib top: 103 cm nstrong cr, erw tubular steel stand on four rubber stumps with hanging bright bars mesh crib. provided with mosquito net aliminium rod. n npretreated with in house 7 tanks hot process and epoxy powder coated minimum 50 microns with phosphate layer underneath for corrosion resistance. n 12 paediatric bed nsize: 1480 1500mm l, 840 850 mm wide and 600mm height. nwith suitable mattress 2” thick, density 38 / 40 foam leather covered, water proof. nms steel tops, bottom size 1050 to 1060 mm with one horizontal and seven vertical supports, rubber shoe, full drop side racks and epoxy coated. n 13 beds with side railing ngeneral / technical specifications nbed size ( approx. ) 206cm x 91cm x 56xm ( lxwxh ) n nhospital bed, uniformly perforated crca sheet top, in two sections. provided with 304 grade stainless steel tubular removable laminated head and foot panels. mounted on strong ‘u’ shaped legs with four 10cms. castors, two with brakes. mechanically operated head raise and knee raise positions provided with collapsible handles permanently attached to both the screws. all m.s. welding must be with mig welding technology and all s.s. welding should be tig welding technology. provided with six mattress guards, provision for i.v.rod at four locations. n nbed top ( two sectional ) nm.s. top sheets ( crca ) : 16 gauge ( 1.2mm ) approx. nm.s. rectangular pipe: 16 gauge ( 1.6mm ) approx. 50 x 30mm n nbase ( legs type ) nms round pipe of 31mm ? x 16g n nbed panels ( removable ) ns.s. pipe aisi 304 grade of 31mm ? x 18g approx. suitable for mattress size: n198 ( l ) x 84 ( w ) cms. n npretreated with in house 7 tanks hot process and epoxy powder coated minimum 50 microns with phosphate layer underneath for corrosion resistance. n nside railing ( drop side type ) napprox. size 1370mm l x 393mm h. ms tubular construction. slide inside bushes lockable with knob. pretreated & powder coated. n 14 almirah standard size n* size: 190cm 200cm height ( inclusive of 15cm pedestal height ) , 90cm – 95cm width, 45cm – 50cm depth. n* 4 adjustable shelves forming 5 compartments. n* pre treated prime quality crca steel conforming to is 513 gr. d quality. 18 swg for body and shelves. 18 swg for the doors. epoxy polyester powder coated of 50 microns or more dry film thickness and oven baked at a uniform temperature of 180 to 200 deg. centigrade. the footrest should be made up of anti rust steel ( type to be coated ) and properly fixed to the bottom of the almirah. n n* all steel components would have multibend construction to be done with tack welding to ensure rigidity and strength. 3 way bolting device which inter locks body at the top and the bottom with the help of a tongue in groove mechanism plus a 6 lever unpickable lock, to be made of chrome plated non ferrous metal alloy. to be stiffened by hat shaped full height steel stiffeners spot welded to the backs of the doors. colour of almirah should be grey. n n* the above product should conform to applicable isi standard in respect of materials, welding process, test & performance. conforming to bis standard 4033 or equivalent. 15 saline stand n n* adjustable from ( 1524mm ) to ( 2438mm ) . central stand 18 gauge erw 1” ( 25mm ) sq. pipe 4 winged base each wing having a length of ( 228mm + / 5mm ) base of 2”x1” ( 51x 25mm ) – 10 gauge rectangular tube on 3” ( 76mm ) swivelling nylon castor wheels. n n* a telescopic ½” ( 13mm ) dia s.s. 304 grade rod with double hooks. and a “t” type s.s. hook ( grip s.s. stud fitted in bakelite knob for holding saline rod in position. epoxy powder coated in grey colour with minimum 50 microns. n n* the above product should conform to applicable isi standard in respect of materials, welding process, test & performance. conforming to bis 5880 standard or equivalent. n 16 stretcher on trolley n* length ( 2133mm + / 10mm ) , width ( 610mm + / 10mm ) , height ( 813mm + / 10mm ) n* removable stretcher top made up of s.s. n 20swg 304 grade with full polish n* sheet metal: the top should be dished to a depth of not less than 1 ½” ( 37mm ) frame. 4 nos. of 1” ( 25mm ) dia 18 swg – s supporting floor studs also to be provided at the bottom of stretcher with nylon grommets. 1 ¼” ( 31mm ) sq. 16 swg erw pipes used both for vertical and horizontal supporting frame. n n* stretcher handle s.s. 18 swg 304 grade round shape with full polish. 6” ( 152mm ) diameter 4 nos. swivelling castor rubber wheels. epoxy powder coating in grey colour with minimum 50 microns. n* the above product should conform to applicable isi standard in respect of materials, welding process, test & performance. conforming to bis 4036 standard or equivalent. n 17 wheel chair n* size width 650mm to 720mm, length 1000mm to 1100mm, height 910mm to 950mm, floor to seat height 480mm to 510mm. 1” ( 25mm ) diameter 18 swg erw tubular frame fitted with metal seat and back. adjustable horizontal aluminium foot rest 90 deg. – 120 deg. with tread flats. half round wooden hand rest with 1” ( 25mm ) cushion. n n* solid rubber tyre wheels 24”x1 ½” ( 610x37mm ) fitted with self propelling steel hoops and brake arrangement. 8” ( 203mm ) dia swivelling castors in front. full length axel should be provided to fix the rickshaw wheel. n n* epoxy powder coated with grey colour with minimum 50 microns. n n* the above product should conform to applicable isi standard in respect of materials, welding process, test & performance. conforming to bis 6571 standard or equivalent. n 18 crash cart ( s.s. ) : n nframe : welded frame construction of stainless steel tubes with 6 coloured removable bins & 2 polystrin lockable storage unit of 3 drawers each. top drawers have contrainers of different sizes. should have cushioned frame to keep oxygen cylinder. n ntop : stainless steel of designation 04 cr 18 ni 10 or 07 cr 18 ni 9 of is 6911 1972 top of 21g sheet. n ncastors : four swiveling type castors as per is – 4034 – 1979 two with brakes. n ndimension : overall appox. size : 950 mm l x 500 mm w x 1600 mm h n nmaterial used: stainless steel sheet of designation 04 cr 18 ni 10 or 07 cr 18 ni 9 of is 6911 1972 & of 21g frame of stainless steel 1” x 18g tubes and ¾” x 18g tubes. two polystyrene lockage storage with three drawers each. stainless steel 12 mm rod for iv cardiac message board of 12 mm thick ply duly laminated. n nfinish : good quality durable rust free as per is 4033 1968 n ntests : as per is:4033 1968 n nmarkings : as per is:4033 1968 n 19 dressing trolley n n* length 762mm + / 5mm, width 508mm + / 5mm, height 914mm + / 5mm. double press bent two nos. s.s. shelves 16 swg with 2 nos. of s.s. bowls of 6” dia fitted on s.s. frame. n* `h’ frame work fabricated out of 1” dia 16 swg s.s. steel s.s. rails ¼ “ 18 swg on all four sides of “shelves with 4” dia 4 nos. of nylon wheel swiveling castors. n n* the above product should conform to applicable isi standards in respect of materials, welding process, tests and performance n 20 medicine cabinet n n* steel almirah ( 1800mm + / 10mm ) x ( 850mm + / 10mm ) x ( 480mm + / 10mm ) . n* a pair of hinged doors & handle with internal locking arrangements with four fixed shelves making five partitions. n* built of 18 swg crca sheet throughout including shelves and leg support. colour – sky blue. n* the foot mounts of the almirah should be of totally antirust material of 120mm height covering almost the entire depth. n* almirah should be fitted with a lock of 6 lever confirming to is:729:1979 or equivalent. n* the above product should conform to applicable isi standard in respect of materials, welding process, test & performance. n 21 delivery table with mattress n n* over all dimension: maximum size 1850 – 1870mm length when extended x 850 – 900mm w x 775 – 800mm h. n n* table tabular base should be made of 13.75mm dia x 16 g. m.s. tubes with horizontal lengthwise support stays a way so as facilitate the obstetrician to stand or sit close to the table. top should be made in 3 sections fabricated mainly out of 18 g.s.s. sheets. back rest section sizes 750mm x 625mm should be welded on 25mm dia s.s. tube x 16 g hinged on 45mm long x 5 mm thick m.s. flat pieces welded to the horizontal support. the backrest should be adjustable on minimum 43 different inclination by means of ratchet. n* arrangement which should consist of 12mm dia s.s. rod supported on m.s. flat 32mm x 6mm thick size. middle section 345 – 355mm x 650 – 660mm made of 18 g.s. sheet with reinforced trapezoidal recess which should admeasure effective 200mm inside, 265mm outside, 130mm deep size ( approx. ) . leg section should admeasure 690 – 700mm x 590 – 600mm shall be made of 18g s.s. sheet welded on 25mm dia x 16g tubes. n* it should have suitable sliding arrangement. the entire tabletop should give trendelenberg position by gas spring system in stepless instantaneous manner. n n* the removable safety side railing of approx. size 680 – 690mm l x 195 – 205mm h should be made of 12mm dia stainless steel rods fitted on headend and on both sides. double bent, rubber padded lithotomic rods should be made of 12mm dia stainless steel. these should be adjustable by 2 clamps levers of 10mm dia stainless steel total rod having arm length of 100mm. patients bearing down hand grips should be made of 22mm dia x 18 g stainless steel tubes fixed with pvc handle and should have location adjustability for patients convenience. n* the entire trendelenberg arrangement should be mounted on s.s. 18g rectangular frame of size 60mm x 30mm x 16g with one 40mm x 20mm x 16g rectangular s.s. tube support. this frame should be hinged on the tubular base. waste collecting stainless steel bowl should be provided and shall rest on stainless steel bracket made of not less than 9.5mm dia stainless steel rod. one number stainless steel telescopic saline rod with 12mm dia stainless steel rod should be provided which should be adjustable in s.s. tubular socket. n n* sectional mattress: 50mm thick mattress ( polyurethane, density 40 to 50 ) should be made of foam cushion, fully covered with rexene. all components should be thoroughly pre treated chemically in eight tank – treatment system. the treated metal surface should then be coated with epoxy polyester powder with paint film thickness of 50 microns or more and oven baked at 180 degree to 200 degree centigrade. n n* the above product should conform to applicable isi standard in respect of materials, welding process, test & performance. n 22 gynae examination table: n• 2 section with mattress with “u”cut suitable for gynae examination n• strong steel tubular frame n• approximate size 1830 min ( l ) x 600 mm ( w ) x 760 mm ( h ) n• head section adjustable on ratchet system n• four legs fitted with rubber shoes at bottom n• finish – pretreated & epoxy coated. n 23 instrument trolley – stainless steel n* ( 686mm + / 5mm ) l x ( 457mm + / 5mm ) w x ( 813mm + / 5mm ) h, 1” ( 25mm ) dia 18 swg s.s. tubular frame. frame mounted on 4” ( 102mm ) dia castor wheels. n* two stainless steel shelves double press bent 18 swg fully s.s. ( 16mm ) ( 8 gauge ) dia rod fitted with s.s. rails on both shelves ( 3 sides only ) . n* the above product should conform to applicable isi standard in respect of materials, welding process, test & performance. 24 swab rack ( ot ) n n* rack should be made up of tubular frame of 25.4mm x 18 swg 304 grade ss tube on four 50mm dial. antistatic swivelling castors fitted with ss rod containing spikes on ss drip trays at the bottom. n n* it is used in operation theatre to keep sterilized gauze on separate spikes, so as to keep track of gauze count, used during surgery. n n* the above product should conform to applicable isi standard in respect of materials, welding process, test & performance. conforming to bis standard or equivalent. n 25 mayo’s trolley n* s.s. tray ( 508mm + / 5mm ) l x ( 406mm + / 5mm ) w, confirming to is:5522. n n* frame work mounted on four nos. 2” ( 51mm ) dia swivelling nylon castors. framework should be of s.s. 1” ( 25mm ) dia 18 swg pipe. tray fitted with adjustable 5 / 8” ( 16mm ) s.s.rod, which is adjustable from 30” – 50” ( 762 1270mm ) . tray should be stable and removable. n* the above product should conform to applicable isi standard in respect of materials, welding process, test & performance. conforming to bis 6905 standard or equivalent. n 26 instrument cabinet with locking nfacility n n* length ( 1676mm + / 10mm ) , width 914mm + / 10mm ) , breadth ( 456mm + / 10mm ) . fabricated using 18 swg m.s. sheet for back and side cover. front cover of 18 swg m.s. sheet. n n* front door is fitted with glass panel of 4mm thick with locking facility and should have 4 nos. of glass shelves 6mm thickness. the cabinet should be rested on an antirust base. epoxy powder coating with white colour with 50 microns. n n n* the above product should conform to applicable isi standard in respect of materials, welding process, test & performance. conforming to bis 6877 standard or equivalent. 27 single step stool nthe general requirements shall be as per is 4033 1968 n nframe : frame work of welded n tubular construction. n ntop : top crca 18g sheet. n aluminium top tread plates. n nshoes : legs fitted with rubber n shoes durable quality ( free n for 1 year use ) n ndimension : height 20 to 22cms. step n size about 500mm x n 300mm w n nmaterial : vertical tube of erw 18g n support rod of 9.8mm n and top of crca 18g sheet. n nfinish : pretreated and powder n coated in 50 microns thickness. n ntest : as per is 4033 1068 & n latest amendments issued if any. n nmarking : as per is 4033 1968 & n latest amendments issued if any. n 28 anaesthetist trolley nframe : argon welded & s.s. tubular rust free construction. n ncastors : 8cm / 7.5cm dia wheel type swiveling castors having antistatic tuber tread conforming to is 4034 1979. nshape & ndimension : overleaf size 760mm l x 460mm w x 820mm h made of strong cr. erw tubular steel frame with two s.s. shelves. top shelf having two drawers underneath, is covered on three sides with s.s. guard rails. nmaterial used: vertical s.s. tubes of 25mm x 18 g. longitudinal s.s. tubes of approx. 19mm x 18g. railing of s.s. 10mm rod. stainless steel top of 21g shelves conforming to 04 cr 18 ni 10 or 07 cr 18 ni 9 grade as per is 6911 1972. nfinish : pretreated. epoxy finished. n 29 kick bucket ( s.s. ) n nthe general requirements shall be as per is 4033 1968, subject to the following specifications: n nframe : stainless steel welded tubular and rod construction. n nbowl details : stainless steel bowl. n ncastors : mounted on three 7.5cm dia wheel type swiveling castors as per is 4034 1979. n ndimension : stainless steel bowl of 350mm dia total height of bucket is 300mm ( approx. ) . n nmaterial used: stainless steel bowl 22g conforming to designation 04 cr 18 ni 10 or 07 cr 18 ni 9 as per is 4034 1979. n nfinish : in good quality durable rust free finish. n ntest : as per is 4033 1968 & latest amendments issued if any. n nmarking : according to 7 of is 4033 1968 & latest amendments issued if any. n n 30 opd furniture n nsteel table with sunmica wooden top n* ( 1219mm + / 10mm ) length, ( 762mm + / 5mm ) height, ( 609mm + / 5mm ) width. n n* table top ____ board covered with sunmica. n n* legs 1 ¾” ( 44mm ) finished section one drawer and cupboard are provided on right side with locking facility, made out of 3 / 16” ( 5mm ) one side metal cross bars 2” ( 51mm ) x 1” ( 25mm ) section are used sufficient knee space provided on the left side. n n* table to be epoxy powder coated in grey colour with minimum 50 microns. n* the above product should conform to applicable isi standard in respect of materials, welding process, test & performance. conforming to bis 4033 standard or equivalent. 31 chairs n* size: height 86cm – 90cm, depth 56cm – 60cm variation in all sides. width 55 – 60cm and angle between backrest and seat to be 110 to 115 degrees. n* caning used for seat and back should be of high tensile strength. n* wooden seat and back: the seat and back should be made from chemically treated and seasonal wood caned and finished with black melamine polish and fixed to the tubular frame separately with screw which should not be projected out. the wooden frame must not less than 25mm thick + / 1mm thick and 30mm width + / 2mm thick. seat should be well supported with cross bars or beams at front and back. n* steel frame: the frame should be cantilever type and made from crca tubular pipe 1” x 14 swg including armrest tube. n n* arm rest: arm rest handle should be made of gas assist injection moulded from black polypropylene. all the four rubber float shoes to be provided. n* all components should be thoroughly pre treated chemically, and then coated epoxy powder with dry film thickness of 50 micron or more and oven baked at 180 degree to 200 degree centigrade. t.a. grey. the above product should conform to applicable isi standard in respect of materials, welding process, test & performance. n 32 patient’s revolving stool n n* top diameter: 300 – 305mm. height adjustment from 480mm to 680mm. n* four legs should be cut and bent to form a standard curve. it should be welded to central pipe with co2 tig welding to give better weld strength. top of the central pipe should be welded with 4 tpi square threaded m.s. nut. stainless steel top should be strengthened by ribs and its edges should be beaded to avoid sharp edges. it should be supported on strong 10mm dia round m..s. rings, which should be welded with bright flats. in the centre of the flat 4 tpi square threaded screw should be riveted. this screw turns in the threaded nut of the base. base should be fitted with good quality rubber feet reinforced with m.s. washers for longer life. n* the materials used should be as follows: tubular frame of 1” x 18 g.m.s. pipe. central m.s. pipe of 1.1 / 2” x 16 g and top of stainless steel. n* all components should be thoroughly pre treated chemically in eight tank pre treatment system. the treated metal surface should then be coated with epoxy polyester powder with paint film thickness of 50 microns or more and over baked at 180 degree to 200 degree centigrade. n* the above product should conform to applicable isi standard in respect of materials, welding process, test & performance. n 33 wash basin on a stand n n• steel tubular frame 1” diameter, swg 16 with iron rod attached to the ring for towel. n n• size of the basin – 16” n n• height approx. 85 – 90cms n n• epoxy coated 50 microns, white colour n n• three legs base interconnected with steel rods. legs to be provided with three 50mm nylon swiveling castors. n 34 examination table n ngeneral / technical specifications noverall approx size 1830mm ( l ) x 610mm ( w ) x 760mm ( h ) . table top of 18g c.r. sheet m.s. in two sections. the head flap of 18g c.r. sheet m..s. in two sections. the head flap adjustable on several inclinations both up and down by easily accessible rack. welded tubular frame work made of 31.7mm od x 18g tube for verticals and 25.4mm od x 18g horizontal stays. fitted with rubber shoe with metal washer in the inside of the shoe. n 35 wooden benches / waiting bench n* material is wood comprising of rectangular pieces width 7.5cms for seat and back. n* frame: a mild steel frame for the support of the seats and back. length of the bench to be 185cms, height of the seat from floor to be 45cms. width of the seat 46cms. the height of the back from seat to top to be 41cms. angle between back and seat should confirm to is:4033. n* type of wood is assam teak quality or n equivalent. n* it should be stable and polished. n 36 conference table ( oval shape ) customized to accommodate 12 persons. the table should have the components which can be joined and separated to increae its utility as multipurpose table, without any drawer and locker box table made out of 18mm plb with pvc leaping and crc steel base provided with one executive revolving chair high back and eleven executive chairs, revolving medium back, fully loaded fitted with push back, tilting mechanism, gas lift, shocker mechanism, pv soft arms seat and back either in rubber foam or in poly urethane of high density. base of chair must be heavy dirty steel powder coated with five superior quality casters. fabric must be either crape on leathrite of good quality. 37 steel office almirah ( small ) size of the almirah must be 1270mm ( h ) x 760mm ( w ) x 430mm ( d ) ( 50” x 30” x 17” ) with three shelves making four compartments without locker. doors of almirah must be made of 1.240mm ( 18 gauge ) thick metal crca sheet, providing 6 lever good quality lock. body of the almirah must be made of 1mm ( 20 gauge ) thick metal crca sheet. almirah should be oven backed with superior quality stoving paint for smooth and long lasting finish. 38 glass door almirah, almirah must be of overall size 1980mm ( h ) x 915mm ( w ) x 480mm ( d ) ( 78” x 36” 19” ) having four adjustable shelves making five compartments. door and body must be made of 1mm ( 20 gauge ) thick metal crca sheet. doors must be fitted with 5mm transparent glass for clear vision, providing three way locking device. 39 worker lockers cabinet locker cabinet must be of overall size 1980mm ( h ) x 915mm ( w ) x 480mm ( d ) with separate lockers of the size. 12 locker cabinet with each locker size ( 18” ( h ) x12” ( w ) x 17” ( d ) 40 steel bookshelf size of the book case must be 1675mm ( h ) x 840mm ( w ) x 305mm ( d ) ( 66” x 33” x 12” ) or 1675mm ( h ) 840mm ( w ) x 380mm ( d ) ( 66” x 33” x 15” with four shutters made of 1mm ( 20 gauge ) thick metal crca sheet fitted with transparent 5mm glass. shutters must slid on ball bearings for smooth movement and easy handling. body of the bookshelf must be made of 0.8mm ( 22 gauge ) . 41 steel filling cabinet with 4 drawers size of the cabinet must be 1380mm ( h ) x 470mm ( w ) x 700mm ( d ) ( 54 1 / 4” x 18 1 / 2” x 27 1 / 2” ) fitted with automatic locking arrangement. body of the cabinet must be made of 0.8mm ( 22 gauge ) thick metal sheet and drawers of the cabinet mut be made of 0.63 ( 24 gauge ) thick metal sheet. drawers must slide smoothly on telescopic channel systems ( solid roller suspension ) the cabinet must be painted with stove enamel there after be baked at a specified temperature in oven for long lasting and smooth finish. 42 slotted angle rack closed type shelves of the rack must be made of 1mm ( 20 gauge ) thick crca sheet and slotted angle must be of 2mm ( 14 gauge ) thick sheet keeping only front open size a ) 2590mm ( h ) x 915mm ( w ) x 460mm ( d ) ( 102” x 36 x 18” having 8 shelves making 7 compartments. 43 steel clerk table table must be fitted with a three drawer box on the right hand side of thickness 0.8mm ( body ) and 0.63mm ( drawers ) drawers must slide on solid roller suspension for smooth movement and load bearing capacity frame of the table must be of 1mm ( 20 gauge ) legs of the table must be made of 1” x 1” square pipe of 16 gauge table shall be provided with sunmica top of novapan brand: nsizes 48” ( w ) x 24” ( d ) x 30” ( h ) n 44 steel table with cubboard ( officer ) table must be fitted with a three drawer box on the right hand side and a cupboard having one shelf making two compartments on the left hand side of thickness 0.8mm ( body ) and 0.63mm ( drawers ) . drawers must slide on solid roller suspension for smooth movement and load bearing capacity frame of the table must be of 1mm ( 20 gauge ) legs of the table must be made of 1” x 1” square pipe of 16 gauge table shal be provided with sunmica top of novapan brand nsizes : 72’ ( w ) x 36” ( d ) x 30” ( h ) n 45 automation table l type ( class i officer table must be fitted with a three drawer box on the right hand side and a cupboard having one shelf making two compartments on side table fitted at left side giving the table l shape thickness 0.8mm ( body ) and 0.63mm ( drawers ) . drawers must slide on solid roller suspension for smooth movement and lax bearing capacity frame of the table must be of 1mm ( 20 gauge ) table shall be provided with sun mica top of nova pan brand. sizes : n72” ( l ) x 36” ( d ) x 30” ( h ) nside table size 36” x 24” 30” n 46 computer table table frame must be made of 20 gauge thick sheet, fitted with drawer box on right side table shall be provided with slide in keyboard tray and storage shelf for voltage stabilizer, cpu and other accessories table shall be provided with pre laminated board of nova pan brand. sizes 48” x 30” x 30” ( three drawer ) , 47 printer table steel printer table made with 25mm thick top and 25mm thick prelaminated board of nova pan brands for sides, specially designed slots to feed paper on to the table top providing stationary input output shelves. nsizes: 24” ( w ) x 24” ( d ) x 30” ( h ) n 48 computer revolving chair with arms na low back chair with pu seat and back fitted with hard arms. chair must have push back facility base of the chair must be made of crca steel of heavy gauge ( approx 18 gauge ) duly powder coated with five castors of good quality. fabric of the chair must be either crape or equivalent to crape. n 49 visitor chair with arms the chair must be made of superior quality steel capsule pipe fitted with pu arms seat and back must be in rubber foam / pu of about 32 density upholstered with good quality cotton fabric or crape. frame of the chair must be powder coated. 50 visitor chair without arms nthe chair must be made of superior quality steel capsule pipe fitted without arms seat and back must be in rubber foam / pu of about 32 density upholstered with good quality cotton fabric or crape. frame of the chair must be powder coated. 51 executive chair ( high back ) na revolving chair till head fully loaded fitted with push back, tilting mechanism, gas lift, shocker mechanism, pu soft arms, seat and back either in rubber foam or in polyurethane of high density. base of the chair must be of heavy steel duly powder coated with five superior quality casters. fabric must be either crape or leatherette of good quality n 52 executive chair ( medium back ) a revolving chair till head fully loaded fitted with push back, tilting mechanism, gas lift, shocker mechanism, pu soft arms, seat and back either in rubber foam or in polyurethane of high density base of the chair must be of heavy steel duly powder coated with five superior quality casters. 53 centre table nsize of the table should be rectangular / oval shape, it should be made of teak wood having top of 19mm thick commercial board of century, duro or orchid make pasted with 1mm thick sunmica of either marino greenlam, kitmica make: nsizes: ( a ) 48” ( w ) x 24” ( d ) x 18” ( h ) 54 sofa set ( 3+1+1 seater ) it must be made in standard size frame of the sofa set should be made of teak wood covered with superior quality tapestry / leather foam / velvet etc. cushion of rubberized foam of high density nd of reputed make with isi mark. size of the center table should be 4’ x 2’ rectangular / oval shape. it should be made of teak wood having mica top of 1mm with bottom shelf. 55 settee : settee must be made of teak wood frame covered with 12mm ply frame should be melamine finish. size 6’ x 2.5 of 1.5’ height with 3” polyurethane foam with lathe rite material .. 56 electro hydraulic operation table with accessories n• multipurpose powered electro hydraulic for all major surgical procedures. table must be requipped to handle laparoscopic surgery, orthopaedic, ophthalmic, general neuro, urological, gynaecological and bariatric. n• should have great c arm accessibility and full body imaging coverage without having to reposition the patient. n• table top sections should be powered with horizontal shift of at 530mm traversing top ( bidirectional cranially / caudally ) for general and specialist surgery and enable c arm access from the shoulder line to the feet. n• to accommodate heavyset or obese patients, the design load should be at least 250 kg ( articulated weight ) both during up / down and during operation. n• removable and interchangeable head and le sections with an auto locking mechanism to suit different applications. n• the remote control should be waterproof and easy to clean after surgery. there should be an emergency button, in case of an emergency. n• a battery must be supplied as standard accessory which permits cordless use. n• a battery indicator must be provided for checking the remaining charge at a glance. n• in case of an emergency a manual brake release handle should be there. n• the table must have a low height range of minimum 520mm and a maximum height of 1000mm. n• the table should be provided with an override control panel necessarily on the head of the column, for adjustments of height. trendelenburg, reverse trendelenburg, lateral tilts during emergencies. n• port should be available for the purpose of diagnosis and servicing. n• achieving zero level position by pressing a single button from the handset. n• the table must have a narrow base design and a fluid resistant stainless base. n• must have a slide centre stop function. n• the pendant must be durable and one touch. n• there must be a 4 point break system along with swivel casters. n• there must be a three function foot control. n• should have a top with dimensions 500mm ( w ) x 1950mm ( l ) n• should have column base dimensions with 480mm x 970mm n• the operating voltage must be dc 24v n• electric control to achieve the following positions ( all in degrees ) . tredelenburg head up 25*, head down 25*, lateral tilt – left / right 20*, back plate up90*, down 40*, head plate ( detachable ) up 60*, down 90*. n• the power source voltage must be ac 220v, 240v. n...

Due Date : September 11, 2019

Tender Value : ₹ 1.50 Crore

View Tender
24
Northern Railway - Delhi

19908192 tender for gasket lube oil pump.item list : (1) water pump impeller housing gasket lube oil pump back plate gasket. drg.no. ske 1353shop uttar pradesh 100.00 numbers...

Due Date : April 22, 2019

Tender Value : ₹ Ref. Documents

View Tender
27
Indian Army - Delhi

17295800 manufacture and supply of als spares 953 p 1302705 sintered bush 954 p 3707939 spindle assy 955 3120 72 0000714 bushing sleeve 956 f 2437514 ( 5340 174400 ) selector plate 3rd and 4th 957 f 0255010 needle cage 958 2930 002950 impeller water pump engine cooling system 959 2990 016206 cartridge turbocharger 960 5120 424227 puller mechanical 961 f 7100522 driving spindle bkt speedo pinion bush 962 6150 006736 lead storage battery 963 4710 72 0000302 tube assy metal / s / a of pipe injr no 4 964 f 7400300 low pressure indicator switch 965 3040 023449 hub body 966 f 1969710 connector pipe for pr gauge connection 967 5120 424036 punch drift 968 4720 016067 / b 4383975 hose assy non metallic 969 x 3066514 lock plate for grooved nut 970 p 1304842 delivery valve holder 971 p 3227845 sixteenth leaf 972 4710 042028 tube assy metal 973 4730 078983 clamp hose 974 2530 018164 / f 3916600 cylinder pneumatic brake wheel 975 5910 420725 capacitor assy / supperession capacitor 976 5325 009303 ( f 0745710 ) film fingerprint lifting 977 x 0702110 lock spring ring on actuator 978 x 3902610 hose clip ( 20 28mm ) 979 3110 72 0000946 bearing needle roller journal 980 p 1303642 over flow valve 981 4720 016071 / b 4383980 hose assy non metallic 982 4730 72 0000914 bolt fluid passage 983 f 7490500 warning lamp rh indicator high beam 984 f 8061700 glass door fixed 985 x 1708200 gasket timing back plate 986 f 7421300 fuel gauge electrical 987 f 4732611 tommy bar complete 988 5120 424055 remover pin...

Due Date : October 01, 2018

Tender Value : ₹ Ref. Documents

View Tender
28
Northern Railway - Delhi

15226300 tender for gasket back plate( lube oil pump) dlw pt no. 10170080 drg no. 39c 73073 alt.j...

Due Date : March 22, 2018

Tender Value : ₹ Ref. Documents

View Tender
29
Lok Sabha Secretariat - Delhi

14950908 disposal of old/obsolete office machines, equipment, spare parts, consumables, accessories, etc. fax machines ,photocopier machines ,miscellaneous machines . 1. bodkin 2. angeethi 3. table knives (steel) 4. scissors 5. eyelet fixer 6. screw for stitching m/c 7. gulsums (punches) 8. file 3 corner small 9. carpenter’s square 10. drum (tin) for waste paper of cutting m/c 11. flat file 12. pliers (plaas) 13. brass vessel (heavy round bottom 14. numbering machines 15. stapler (centre stitching) ds45l 16. stapler machine 17. stapler machine 18. skiver (knives )for leather cleaning 19. steel saw with handle length 18”x12” 20. chilimchi (steel) donga 21. wooden saw 22. dispenser machine for use tape work 23. big stapler kangaro h.p. 45 24. big stapler kangaro h.p. 10 25. centre stitching stapler kangaro hd 45l 26. adjusting screws 27. actuator 28. actuator 29 bearing bush 30 bearing bush 31 bazel switch 32 bulb for switch 33 bearing 34 bal bearing 35 bearing screw 36 bearing 37 bal bearing 38 bal bearing 39 bearing screw 40 bal bearing 41 blanket screw 42 bush 43 back plate (scrapper bar) 44 blanket cylinder driver gear 45 bush d u 46 bearing housing 47 clutch 48 clutch bush 49 c p c shaft keys 50 cpc cylinder shaft key 51 c p c shaft gear 52 c p c cylinder shaft gear 53 crank lever 54 c i r clip 55 carbon bush 56 distributor roller 57 deliver chute 58 delivery gear 59 driver pulley gear 60 electric motor (220vol./csn350060) 61 front lay 62 filter unit (240 v) 63 feeler bar cam 64 fuse 65 gear 66 grub screw 67 grub screw 68 gear 69 fount tray 70 gear...

Due Date : February 15, 2018

Tender Value : ₹ Ref. Documents

View Tender
30
Indian Army - Delhi

14194039 supply of non exp items pvms no.040193 steriliser, steam high pressure, horizontal, cylindrical, size 500mm di: pvms no.040193 steriliser, steam high pressure, horizontal, cylindrical, size 500mm dia x 1100 mm ( ss ) chamber, jacket, end ring, back plate and steem generator, with one gun metal door dished or reinforced, electrically / kerosene stove heated complete...

Due Date : November 24, 2017

Tender Value : ₹ Ref. Documents

View Tender
31
Northern Railway - Delhi

13356046 supply of spare main contact set, ref no. la5 f 500803 [f500], [main contact set per pole includes 2 fixed contacts and moving contacts, 2 deflectors 1 back plate fixing screw and washers] for control and switch gear make three pole power contactor lci f 500a....

Due Date : August 16, 2017

Tender Value : ₹ Ref. Documents

View Tender
32
Northern Railway - Delhi

13292911 supply of spare main contact set, ref no. la5 f 500803 [f500], [main contact set per pole includes 2 fixed contacts and moving contacts, 2 deflectors 1 back plate fixing screw and washers] for control and switch gear make three pole power contactor lci f 500a....

Due Date : August 14, 2017

Tender Value : ₹ Ref. Documents

View Tender
33
Northern Railway - Delhi

13115182 supply of set of spare parts of air gauge complex. one set consist of 4 items and qty. mentioned 1 knob with seal 06 nos. 2 locking clamp with back plate 06 nos. 3 air brass guide with o ring 06 nos. 4 m 10 bolt with rubber washer and spring 06 nos....

Due Date : July 27, 2017

Tender Value : ₹ Ref. Documents

View Tender
34
Northern Railway - Delhi

13029539 supply of set of gaskets hp [ consisting o4 items] [ details as given below ] 1. 10170080 gasket [lube oil pump to end plate] drg. no. 15b76355 alt [ b ] qty. 02. 2. 10170042 gasket [back plate l.o.pump] drg. no. 39c73073 alt [ j ] qty. 02. 3. 10170091 gasket lube oil pump [face plate] drg. no. 39b73042 alt [ h ] qty. 02. 4. 10170078 gasket [cover for cyl.block gen.end] drg. no. 15d76696 alt [ f ] qty. 04.quantity:  263.00...

Due Date : July 31, 2017

Tender Value : ₹ Ref. Documents

View Tender
35
Northern Railway - Delhi

13029538 supply of set of gaskets hp [ consisting o4 items] [ details as given below ] 1. 10170080 gasket [lube oil pump to end plate] drg. no. 15b76355 alt [ b ] qty. 02. 2. 10170042 gasket [back plate l.o.pump] drg. no. 39c73073 alt [ j ] qty. 02. 3. 10170091 gasket lube oil pump [face plate] drg. no. 39b73042 alt [ h ] qty. 02. 4. 10170078 gasket [cover for cyl.block gen.end] drg. no. 15d76696 alt [ f ] qty. 04.quantity:  184.00...

Due Date : July 31, 2017

Tender Value : ₹ Ref. Documents

View Tender
36
Northern Railway - Delhi

13005961 supply of set of spare parts of air gauge complex. one set consist of 4 items and qty. mentioned 1 knob with seal 06 nos. 2 locking clamp with back plate 06 nos. 3 air brass guide with o ring 06 nos. 4 m 10 bolt with rubber washer and spring 06 nos....

Due Date : July 10, 2017

Tender Value : ₹ Ref. Documents

View Tender
37
Northern Railway - Delhi

12482091 supply of set of spare part of air gauge complex one set consist of 04 items and qty mentioned 1 air adjuster knob with seal, qty 06nos. 2 locking clamp with back plate, qty 06nos 3 air brass guide with o ring, qty 06nos. 4 m 10 bolt with rubber washer and spring 6 nos each item in one set...

Due Date : May 15, 2017

Tender Value : ₹ Ref. Documents

View Tender
38
Northern Railway - Delhi

12402813 supply of set of spare part of air gauge complex one set consist of 04 items and qty mentioned 1 air adjuster knob with seal, qty 06nos. 2 locking clamp with back plate, qty 06nos 3 air brass guide with o ring, qty 06nos. 4 m 10 bolt with rubber washer and spring 6 nos each item in one set...

Due Date : May 04, 2017

Tender Value : ₹ Ref. Documents

View Tender
39
Northern Railway - Delhi

12103541 supply of set of spare part of air gauge complex one set consist of 04 items and qty mentioned 1 air adjuster knob with seal, qty 06nos. 2 locking clamp with back plate, qty 06nos 3 air brass guide with o ring, qty 06nos. 4 m 10 bolt with rubber washer and spring qty 06nos....

Due Date : April 20, 2017

Tender Value : ₹ Ref. Documents

View Tender
40
Northern Railway - Delhi

11892080 supply of set of gaskets hp [ consisting o4 items] [ details as given below ] 1. 10170042 gasket [lube oil pump to end plate] drg. no. 15b76355 alt [ b ] qty. 02. 2. 10170042 gasket [back plate l.o.pump] drg. no. 39c73073 alt [ j ] qty. 02. 3. 10170091 gasket lube oil pump [face plate] drg. no. 39b73042 alt [ h ] qty. 02. 4. 10170078 gasket [cover for cyl.block gen.end] drg. no. 15d76696 alt [ f ] qty. 04....

Due Date : March 08, 2017

Tender Value : ₹ Ref. Documents

View Tender
41
Northern Railway - Delhi

11312942 repair kit for main hydraulic pump for 700 series zdm3 locos to rexroth part no. a10v028, drg. no. 31 lv sc 61 n 00965955, cil part no. 3878470, bosch part no. r910947782 consisting of 11 items. 1. piston 09 nos. 2. cylinder 01 no. 3. retaining plate 01 no. 4. retaining ball 01 no. 5. spring 01 no. 6. pressure pin 03 nos. 7. seeger v ring 01 no. 8. back plate 01 no. 9. locking pin 03 nos. 10. shaft 01 no. 11. oil seal kit 01 kit make rexroth, cummins, bosch...

Due Date : December 29, 2016

Tender Value : ₹ Ref. Documents

View Tender
42
Northern Railway - Delhi

11168531 repair kit for main hydraulic pump for 700 series zdm3 locos to rexroth part no. a10v028, drg. no. 31 lv sc 61 n 00965955, cil part no. 3878470, bosch part no. r910947782 consisting of 11 items. 1. piston 09 nos. 2. cylinder 01 no. 3. retaining plate 01 no. 4. retaining ball 01 no. 5. spring 01 no. 6. pressure pin 03 nos. 7. seeger v ring 01 no. 8. back plate 01 no. 9. locking pin 03 nos. 10. shaft 01 no. 11. oil seal kit 01 kit make rexroth, cummins, bosch...

Due Date : December 12, 2016

Tender Value : ₹ Ref. Documents

View Tender
43
Northern Railway - Delhi

10484526 set of items for wood word governor , consisting of 8 items. per set. 1. back plate, ww part no. 3472 039, qty. 1 no./per set. 2. screw fit hole 6 32 x 3/8, part no. 190398, qty. 2 nos./ per set. 3. shut down plunger tubing, part no. 189764, qty. 1 no./per set. 4. o ring, part no. 182298, qty. 2 nos./per set. 5. retainer spring washer, part no. 186010, qty. 2 nos./per set. 6. set screw sock hd plate, part no. 189782, qty. 1 no./per set. 7. nut 10 32, part no. 1131 953, qty. 2 nos./per set. 8. drive shaft retaining ring, part no. 1017 193, qty. 1 no./per set....

Due Date : September 08, 2016

Tender Value : ₹ Ref. Documents

View Tender
44
Northern Railway - Delhi

10356122 battery charging terminal and fuse box as per rdso drawing no. skel 3930, alt [3]. the modified back plate and its fixing hole should be as per rdso drg.no. for battery charging terminal and fuse box as per rdso drg.no. rdso/pe/sk/ tl/0096 2006, rev 0, sheet 1 and 2....

Due Date : September 13, 2016

Tender Value : ₹ Ref. Documents

View Tender
45
Northern Railway - Delhi

10219062 set of items for wood word governor , consisting of 8 items. per set. 1. back plate, ww part no. 3472 039, qty. 1 no./per set. 2. screw fit hole 6 32 x 3/8, part no. 190398, qty. 2 nos./ per set. 3. shut down plunger tubing, part no. 189764, qty. 1 no./per set. 4. o ring, part no. 182298, qty. 2 nos./per set. 5. retainer spring washer, part no. 186010, qty. 2 nos./per set. 6. set screw sock hd plate, part no. 189782, qty. 1 no./per set. 7. nut 10 32, part no. 1131 953, qty. 2 nos./per set. 8. drive shaft retaining ring, part no. 1017 193, qty. 1 no./per set....

Due Date : August 22, 2016

Tender Value : ₹ Ref. Documents

View Tender
46
Northern Railway - Delhi

10134006 set of gaskets hp [ consisting o4 items] [ details as given below ] 1. 10170042 gasket [lube oil pump to end plate] drg. no. 15b76355 alt [ b ] qty. 02. 2. 10170042 gasket [back plate l.o.pump] drg. no. 39c73073 alt [ j ] qty. 02. 3. 10170091 gasket lube oil pump [face plate] drg. no. 39b73042 alt [ h ] qty. 02. 4. 10170078 gasket [cover for cyl.block gen.end] drg. no. 15d76696 alt [ f ] qty. 04....

Due Date : August 16, 2016

Tender Value : ₹ Ref. Documents

View Tender
47
Northern Railway - Delhi

10126978 lamp holders bayonet type designation b 22 with shade carrier ring for use at 250 volts 2 amps.conf.to is 1258/87 with admt no.1 to 3 the constructional aspects shall meat the requirement to is:1258/79 batten with shade carrier ring with back plate of 53 mm dia and 45 mm pcd or of 46 mm dia and 39 mm pcd....

Due Date : July 22, 2016

Tender Value : ₹ Ref. Documents

View Tender
48
Northern Railway - Delhi

9906093 lamp holders bayonet type designation b 22 with shade carrier ring for use at 250 volts 2 amps.conf.to is 1258/87 with admt no.1 to 3 the constructional aspects shall meat the requirement to is:1258/79 batten with shade carrier ring with back plate of 53 mm dia and 45 mm pcd or of 46 mm dia and 39 mm pcd....

Due Date : June 24, 2016

Tender Value : ₹ Ref. Documents

View Tender
49
Northern Railway - Delhi

9282771 gasket set including 04 items 1. gasket for lamp base plate, part no alt ddg 04, qty 01no. 2. gasket for front glass of lamp, part no alt lug n01, qty 01no. 3. gasket for pcb mounting plate, part no alt dll 03, qty 01no. 4. gasket for back plate of lamp unit, part no alt dbp 07, qty 01no. make altos or similar...

Due Date : March 10, 2016

Tender Value : ₹ Ref. Documents

View Tender
50
Indian Institute Of Technology - Delhi

8882347 supply, installation & integration of sputtering target materials 1 aluminum 2 silver 3 chromium 4 indium 5 platinum { bonded on copper back plate ( 0.250 ) 6 nickel 7 gold { bonded on copper back plate ( 0.250 ) 8 copper 9 manganese 10 silicon 11 germanium 12 titanium oxide ( rutile ) 13 molybdenum oxide 14 molybdenum sulphite 15 vanadium oxide 16 silicon dioxide 17 indium tin oxide in2o3 / sno2, 90 / 10 wtperc. 18 indium tin oxide in2o3 / sno2, 80 / 20 wtperc. 19 indium zinc oxide in2o3 / zno, 85 / 15 wtperc. 20 magnesium oxide 21 zinc oxide 22 silicon nitrite...

Due Date : January 26, 2016

Tender Value : ₹ Ref. Documents

View Tender