earth wire Tenders in Delhi

1
Military Engineer Services - Delhi

40684298 tender for special repair to qtr no p 176 at 12brd under ge ( af ) tughlakabad; 1 demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed by engr in charge. 2 m&l for bricks works with sub class b bricks straight or curved on plan exc 6m mean radius built in cm ( 1:4 ) complete all as specified and as directed by engr in charge. 3 taking down cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by engr in charge. 4 m&l for marble stone chipping of desired colour grit wash on exterior walls in two layers, under layer 12mm cement plaster 1:4 ( 1 cement : 4 coarse sand ) the under layer with scratching tool, applying cement slurry on the under layer @ 3 kg of cement per square metre, top layer 12mm white cement plaster 1:1 / 2:2 ( 1 white cement: 1 / 2 coarse sand : 2 stone chipping 10mm nominal size ) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed by engr in charge.note the work will be executed at 12 m height the rates includes scaffolding and shuttering. 5 m&l for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and as directed by engr in charge. 6 m&l for rendering 15mm thick in cm 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cementincl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and as directed by engr in charge. 7 m&l for preparing old and newly plastered surfaces and applying applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of 1mm thick wall care puttycomplete all as specified and as directed by engr in charge. 8 m&l for rendering 5mm thick in cement mortar in ( 1:3 ) on ceiling making surface even and smooth complete all as specified and as directed by engr in charge. 9 m&l for preparation of old and newly plastered surfaces & applying threecoatsof white wash on ceilings complete all as specified and as directed by engr in charge. 10 demolition of cement concrete ( un reinforced ) in ground floors and pavings n. exc 15 cm thickness ( below or above ground level ) complete all as specified and as directed by engr in charge. 11 m&l for wpt in sunken floors as described here under: sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in cm ( 1:4 ) mixed with water proofing liquid @ 150 ml per bag of cement. preparing plastered surfaces and providing app polymeric water proofing membrane, minimum3 mm thick and weighing not less than 3.0 kg / sqm of make super thermolay manufactured by stp ltd or hyper plas ( polyster ) manufactured by m / s iwl ltd or shatiplas ) polyester manufactured by m / s capital steels and chemicals pvt ltd as approved by ge, black finish reinforced with non woven polyester matt, with a thermo fusible finish laid over compatible bitumen primer ( bitumen primer shall be tank mastic of m / s stp ltd or emw flate of m / s texas india ltd ) at the rate of 0.40 ltr / sqm torching overlaps with a propane or a butanegas torch, with a overlap of 75mm at the sides and 100mm at the ends sealing including applying a coat of cold emulsion bituminous primer all as per manufacturers instructionsincluding preparation of surface by removing the existing treatment, complete all as specified an as directednote : ( i ) polymeric membrane shall belaid in sunken floor and on sides up to finished floor level. ( ii ) the waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. ( iii ) above aspects are deemed to be included in quoted rate. ( iv ) supply only water proofing liquid shall be measured and paid separately 12 m&l for pcc ( 1:5:10 ) type e 2 using 40 mm gradded stone aggregate for filled up the sunken portion complete all as specified and as directed by engr in charge. 13 s&f 50mm dia gi light grade pipe for spout complete all as specified and as directed by engr in charge. 14 taking down chowkats or frames with shutters ( without taking off shutters from the frame ) not exceeding 1.5 sqm complete all as specified and as directed by engr in charge. 15 taking down chowkats or frames with shutters ( without taking off shutters from the frame ) exceeding 1.5 sqm and but n, exc 4 sqm each for archives soffits, linings window boards etc complete all as specified and as directed by engr in charge. 16 s&f 105x60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified and as directed by engr in charge. 17 s&f 125x60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified and as directed by engr in charge. 18 s&f factory made solid pvc door frame in repair of size 50mmx47mm made out of 5 mm thick plain colour pvc sheet reinforced with ms square tube supplying and fixing in opening as per specification given under ssr part ii 2010 and making good the disturbed surfaces complete all as specified and as directed by engr in charge. 19 s&f factory made solid pvc door shutter of 30mm thick style consisting of frame made out of ms tube for top and bottom rails, ms frame shall be covered with heat moulded plain colour pvc c channel having a pvc sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour pvc sheet for top rail, lock rail & bottom rail on either side, as gap insert for top rail & bottom rail, paneling of both side prelem pvc sheet to be fitted in the ms frame welded or sealed to the sites and rails with suitable pvc sheet beading and jointed together with solvent cement supply and fixing in the frame at site all as specified and shown in ssr part ii at page nos 146 to 148 complete all as specified and as directed by engr in charge. 20 s&f stainless steel butt hinges with stainless steel pins medium weight 100mm long fixed including welding to angle iron door frame or fixed to wooden chowkhats complete all as specified and directed by engr in charge. 21 s&f extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed by engr in charge. 22 s&f aluminium alloy, anodised, sliding door bolt of 300 mm long with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded section, fixing bolts, sliding bolts of extruded section or cast aluminium alloy and fixed length 300 mm complete all as specified and directed by engr in charge. 23 s&f 150 mm long aluminium anodised barrel tower bolts of extuded section fixed complete all as specified and directed by engr in charge. 24 m&l for prelaminated particle board, 18 / 19 mm interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by engr in charge. 25 s&f continuous ( piano ) hinges ms bright finish or electrogalvanised 30 mm width of flaps ( when open ) complete all as specified and as directed by engr in charge. 26 s&f for hasp and staples 100mm long aluminium anodised complete all as specified and as directed by engr in charge. 27 m&l for flush shutter 40 mm thick solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed by engr in charge. 28 s&f ofsingle legged aluminium floor door stopper 140mm long with alloy body and tongue anodised with hard drawn steel spring complete all as specified and as directed by engr in charge. 29 demolition of cement concrete reinforced in any position incl cut of bars as required complete all as specified and as directed by engr in charge. 30 m&l for reinforced cement concrete ( 1:2:4 ) type b1using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by engr in charge. 31 m&l for form work to soffits of suspended slab such as roof slab, floor slab etc n exc 200 mm thick roughfinished surface of concrete slab complete all as specified and as directed by engr in charge. 32 m&l for formwork for fair finished to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of rcc / pcc bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed by engr in charge. 33 m&l for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and as directed by engr in charge. 34 all as per sl item no 33 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed by engr in charge. 35 demolition of cement concrete ( un reinforced ) in ground floors and pavingsexc 15 cm thickness ( below or above ground level ) complete all as specified and as directed by engr in charge. 36 m&l 100mm thick cement concrete ( 1:2:4 ) type b2 using 40mm graded stone aggregate as in path / plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. 37 m&l for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by eng in charge. 38 m&l for cement concrete 100 mm thick ( 1:4:8 ) type d2 using 40mm graded stone aggregate complete all as specified and directed by eng in charge. 39 m&l for sand filling under floors or in foundations including watering and consolidationcomplete all as specified and directed by engr in charge 40 m&l for factory made vibro compacted cement concrete interlocking paver block any shape and size confirming to is 15658 2006 of 60mmthickness, m 50 grade with grey cement and pigment complete all as specified and directed by eng in charge. 41 dismantling of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and as directed by engr in charge. 42 m&l for machine cut kota stone slab flooring 20 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing complete all as specified and as directed by engr in charge. 43 m&lmachine cut kota stone slabs as in vertical surfaces such as risers of steps 20 25 mm thickover 15 mm thick rendering in cm ( 1:4 ) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edges complete all as specified and as directed by engr in charge. 44 dismantling asbestos cement ( corrugated, semi corrugated, etc. ) sheets in roof coverings complete all as specified and directed by eng in charge. 45 s&f pre painted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by eng in charge. 46 dismantling of wrought iron ormild steelwork of any description complete all as specified and directed by eic complete all as specified and directed by eng in charge. 47 s&f roof trusses fe 410 w ( gde e 250 ) quality a ( framed ) , trussed, purling, wind tie, crane gentries and rail and fastening and heavy bracket framing ( beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc complete all as specified and as directed by engr in charge. 48 s&f framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to fe.290.gde e 165 complete all as specified and directed by eng in charge. 49 m&l for preparation of old / new or previously untreated steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by engr in charge. 50 cutting out cracks to v section in existing roofs or terracing cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 ( by weight ) complete all as specified and directed by eng in charge. 51 roughening the surfaces of old concrete roof surfaces by picking, sweeping clean and washing down with water to remove dust etc including removal of old treatment of any description and removing the debris to a distance of n.exc 50 m away from plinth protection complete all as specified and as directed by engr in charge. 52 m&l for applying cement slurry over existing roof surface @ 3 kg / sqm complete all as specified and as directed by engr in charge. 53 m&l for pcc ( 1:2:4 ) type b 0 using 10 / 12.5 mm graded stone aggregate laid over roof slab after applying cement slurry for filling undulation finished even and smooth without using extra cement complete all as specified and as directed by engr in charge. 54 m&l for 10mm thick rendering in cm ( 1:4 ) using water proofing compound at the rate of 3% weight of cement over concrete surfaces including s&f app polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.0 kg / sqm of black finish reinforced with non woven polyester matt, with a thermo fusible finish laid over compatible bitumen primer at the rate of 0.40 kg / sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructionscomplete all as specified and as directed by engr in charge. 55 supply only water proofing compound complete all as specified and as directed by engr in charge. 56 dismantling water tanks of 500 ltr capacity complete all as specified and as directed by engr in charge. 57 s&f of new 500 ltr capacityrotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in ssr part i complete all as specified and as directed by engr in charge. 58 dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by engr in charge. 59 m&l for screed bed or bedding layer of mortar 15 mm thick in cm ( 1:6 ) for laying floor finishes complete all as specified and as directed by engr in charge. 60 m&l for non skid joint free ceramic coloured printed tiles 7 to 8mm thick ( square / rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by engr in charge. 61 m&l for rendering 10 mm thick in cm ( 1:3 ) finished even and fair as on brick or concrete surfaces for laying wall tiles complete all as specified and as directed by engr in charge. 62 m&l colour joint free glazedceramic tiles in vertical surface 350x250x7mm / 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed by engr in charge. 63 s&fin repairs of vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed by engr in charge. note : pillar tap shall be measured as supply only under respective item. 64 s&f in repairs of40 mmwaste coupling of ptmt ( half or full threaded ) minimum weight 40mm 60gms complete all as specified and as directed by engr in charge. 65 s&f in repairs of pillar tap 15mm bore dia cast copper alloy with cap capston chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly buts screwed for iron pipe complete all as specified and as directed by engr in charge. 66 s&fin repairs offor angle stop valves 15mm bore ( for iron pipe ) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends complete all as specified and as directed by engr in charge. 67 s&f in repairs ofreplacement sink with drainage board made of stain less steel 1 mm thick kitchen or laboratorieswith plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or includingfixingcantilever brackets and connecting union to pipe overall size 915x 460x bowl size 410x330x160mm as approved by engineer in charge. 68 s&fin repairs of32 mmwaste coupling of ptmt ( half or full threaded ) minimum weight 32mm 45gms complete all as specified and as directed by engr in charge. 69 s&fin repairs ofpvc low level cistern of 10 lit capacity inclusive of brackets and pvc bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and as directed by engr in charge. 70 s&f in repairs offor bib taps 15mm bore ( for iron pipe ) cast copper alloy with fancy type chromium plated butter fly handle screwed down complete all as specified and as directed by engr in charge. 71 s&f in repairs of 450 mm long pvc connection with two no ptmt nut and rubber washers suitable for 15mm bore gi pipe in replacement of existing one complete all as specified and as directed by engr in charge. 72 s&f in repairs of600 mm x 450 mmmirror 5 mm thick of selected quality glass, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screw and cup washer complete all as specified and as directed by engr in charge. 73 s&f in repairs of 125 mm fancy type shower rosesbrass chromium plated withc p arms for15mm bore gi pipe complete all as specified and as directed by engr in charge. 74 s&f 15mm bore gi tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed by engr in charge. 75 all as per sl item no 73 but 20mm dia complete all as specified and as directed by engr in charge. 76 taking up or down steel water tubing and connections including cleaning for refixing or removal to store of 15 mm bore complete all as specified and as directed by engr in charge. 77 taking up or down 20mm bore gi tubing and connections, including cleaning for re fixing or removal to store, complete all as specified and as directed by engr in charge. 78 s&f in repairs of green marble work 18 to 20mm thick ( table rubbed and polished ) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar ( 1:4 ) including pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match with mar complete all as specified and as directed by engr in charge. 79 m&l for 25 mm thick cement concrete ( 1:2:4 ) type b1 using 20mm graded stone aggregate complete all as specified and as directed by engr in charge. 80 s&f in repairs of 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles ( hollock ) , prepared to receive glass / gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass / gauge etc. the size of rails & style as specified in ssr part i ( 2009 ) section 8 and as per is 1003 ( part i ) kiln seasoned as per is 1141 and chemically pressure treated as per is 401 complete all as specified and as directed by engr in charge. 81 m&l for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coatof pink primer complete all as specified and as directed by engr in charge. 82 m&l for preparation of old painted surface of wood or wood based materials of any description not otherwise describedover 10cm girth or width & applying one coat of synthetic enamel paint ist quality complete all as specified and as directed by engr in charge. 83 s&f fixed galvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanized wire staplesin door and steel window complete all as specified and as directed by engr in charge. 84 taking down carefully aluminium / copper point wiring on battenor in pvc conduit or in ms conduit with gi earth wire etc ( for light, fan, socket or power ) complete, including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to storefor keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and making goodthe disturbedsurfaces of walls, floors, ceilings etc. complete all as specified and as directed by engr in charge. 85 taking down carefullyexisting wooden board, main switch, mcb db boxes with mcbs, sheet metal boxes, cut out, etc of any size anycapacity fromboards complete and makinggoodthe disturbedsurfaces of walls complete all as specified and as directed by engr in charge. 86 taking down carefully sub main wiring of size including batten and making good disturbed surface of wall complete all as specified and as directed by engr in charge. 87 m&l complete for wiring with cable of size 1.5 sqmm single core copper multistrand conductor including continuous earth wire, using cable frlsinsulated ( unsheathed ) 1100 volts grade conforming to is 694 drawn in to and including concealedpvc rigid conduit medium duty with all fittings and fixing accessoriesisi certified is 9537 part 3 and terminated in to pressed steel metal flushboxes suitable for modular accessories and including modular cover plates with framefor mounting switches, socket regulator, brackets etc andincluding necessary cement work including cutting chases pinning in making good to facing and pointing in cement mortar ( 1:3 ) to the ends or cutting chases for concealed conduit point wiring and making good disturbed surface complete all as specified and as directed by engr in charge.cutting not exc 4cm girth and 4cm width for followings: 88 one light point controlled by one, one way switch 89 one fan point controlled by one, one way switch and regulator. 90 one 3 pin socket out let 5 amps independent 91 one 5pin 5 amps socket point in same board with other switches. 92 one 3 pin socket out let 15 amps independent but with cable of size 4.0 sqmm in point wiring and 2.5 sqmm in continuous earth wire. 93 m&l for modular switch oneway 6 amps 1 module complete all as specified and as directed by engr in charge. 94 m&l for modular switch oneway 16 amps1 module complete all as specified and as directed by engr in charge. 95 m&l for modular socket2 in 1, 5 pin 6 amps 2 module complete all as specified and as directed by engr in charge. 96 m&l for modular socket2 in 1, 6 pin 6a / 16 amp 2 module complete all as specified and as directed by engr in charge. 97 m&l for modular fan regulator stepped type 120 watt 2 module complete all as specified and as directed by engr in charge. 98 m&l for ceiling rose surface bakelite 3 terminal complete all as specified and as directed by engr in charge. 99 m&l for pvc / polycarbonate type lamp holder, insulated body, with back plate for batten fittings complete all as specified and as directed by engr in charge. 100 s&f energy saving led lamp 12watt, 230 volts, 50hz complete all as specified and as directed by engr in charge. 101 m&l in replacement of pvc exhaust fan of size 250 mm sweep, 1400 rpm single phase, single phase, 230 volt ac 50 hz with louver shutter / grill and connection complete all as specified and directed by engr in charge. make: cat part no fhvvedxowh10 of havells / crompton / khaitan 102 m&l for sub main wiring with single core copper multi strand conductor frls flexible insulated ( unsheathed ) cable of size 2x2.5 sq mm and 1x1.5 sq mm as in continuous earth wire drawn into & including pvc conduit medium 25mm dia isi marked complete with fittings and fixings accessories laid concealed complete. and including necessary cement work including cutting chases pinning in making good to facing and pointing in cement mortar ( 1:3 ) to the ends or cutting chases for concealed conduit sub main wiring and making good disturbed surface complete all as specified and as directed by engr in charge. cutting not exc 4cm girth and 4cm width. 103 m&l for sub main wiring with single core copper multi strand conductor frls flexible insulated ( unsheathed ) cable of size 2x06sq mm and 1x4 sq mm as in continuous earth wire drawn in to & including pvc conduit medium 25mm dia isi marked complete with fittings and fixings accessories laid concealed and including necessary cement work including cutting chases pinning in making good to facing and pointing in cement mortar ( 1:3 ) to the ends or cutting chases for concealed conduit sub main wiring and making good disturbed surface complete all as specified and as directed by engr in charge. cutting not exc 4cm girth and 4cm width. 104 m&l for 1x 20 watts ( 4 feet ) wall mounted led batten, extruded aluminium heat sink provided for efficient heat dissipation &integrated electronic driver including lamp complete all as specified and as directed by engr in charge. 105 m&l for 1x 9 / 10 watts ( 2 feet ) wall mounted led batten, extruded aluminium heat sink provided for efficient heat dissipation &integrated electronic driver including lamp complete all as specified and as directed by engr in charge. 106 m&l for mcb dist board, sheet steel, phosphatised, powder printed with bus bar, neutral link, earth bar & din railspn dist board 08 ways double door complete all as specified and as directed by engr in charge. 107 m&l for mcb single pole & neutral 240 volts, c curve 10 ka40 60 amp complete all as specified and as directed by engr in charge. 108 m&l for mcb single pole 240 volts, c curve 10 ka10 amp complete all as specified and as directed by engr in charge. 109 m&l for mcb single pole 240 volts, c curve 10 ka 16 amp complete all as specified and as directed by engr in charge. 110 m&l for mcb single pole 240 volts, c curve 10 ka 40amp complete all as specified and as directed by engr in charge. 111 dismantling carefully the existing solar water heater of capacity 200 lpd on the roof top of exisiting building completely including pipe line, steel structure and re installing the same including suitable rcc foundation and repair / replacement of necessary items / materials with good finishing for smooth functioning complete all as specified and directed by engr in charge....

Due Date : December 02, 2023

Tender Value : ₹ 24.30 Lakhs

View Tender
2
Municipal Corporation Of Delhi - Delhi

40650910 tender for provision of ei, fans and compound lights in newly constructed je office in ward no. 113 mohan garden under west zone.; 1 wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required.group c 2 wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required2x2.5 sq.mm+1x2.5 sq.mm earth wire 3 wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required 2x4sq.mm+1x4 sq.mm earth wire 4 wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required4x4 sq.mm+ 2x4 sq.mm earth wire 5 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5 / 6 & 15 / 16 a modular socket outlet and 15 / 16 a modular switch, connections etc. as required. 6 supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5 / 6 amp switch 7 supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5 / 6 amp socket out let 8 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 6 way double door 9 supplying and fixing 5 amps to 32 amps rating, 240 / 415 volts, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.single pole 10 supplying and fixing following rating, double pole, 240 volts, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required. 63 amps 11 installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. upto 450 mm sweep 12 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm 13 laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. upto 35 sq. mm ( clamped with 1mm thick saddle ) 14 earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. without charcoal / coke and salt as required. 15 providing and laying earth connection from earth electrode with 6 swg dia g.i. wire in 15 mm dia g.i. pipe from earth electrode including connection with g.i. thimble excavation and re filling as required. 16 providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required. 17 supply, installation, testing and commissioning of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current ( bldc ) motor, class of insulation: b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value ( cmm / w ) minimum 6.85, air delivery minimum 215 cmm, 350 rpm ( tolerance as per is : 374 2019 ) , thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c ( max. ) , insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. 18 providing and fixing circular / hexagonal cast iron of ms sheet box for ceiling fan clamp of internal dia 140mm, 73 mm height, top lid of 1.5 mm thick ms sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron / ms sheet box by means of 3.3 mm dia round headed screws, one lock at the corners, clamp shall be mad eof 12 mm dia md bar bent to shape as per standard drawing. 19 supply of 12 ( 300m ) sweep 1400 rpm exhaust fan heavy duty complete with shutter, blade etc as required 20 supply, installation, testing and commissioning ofsingle / threephase mono block p / set complete with all accessories workable on 240 / 415 volt. 50 hz ac supply . ( a ) 1hp ( 0.75 kw ) single phase pump set head frame 12.5 mt upto 25 mt suction and delivery 25x25 21 supply ofxlpe insulated, pvc sheathed al.conductor armoured cable 1.1 kvgrade conforming to is 7098of following sizes 2 x 6 sq mm 22 s / i / t / cof led tubetype luminaire20 watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient leds with the following: ( a ) total system wattage 20 watt+ / 5% ( b ) luminous efficacy lumens / watt >=95 ( c ) power factor >=0.95 23 sitc of 60w led flood light luminiare fitted with , lens, made of pressure die cast aluminium housing & halonix toughened glass cover complete with the following specification as reqd with ip 66 protection ( a ) total system wattage =60 watt+ / 5% ( b ) luminaire efficacy>=lo0 lm / w ( c ) power factor>=0.95 ( d ) protection class ip 66 24 p / f of hot press sheed moulded compound ( smc ) fireretardant ( temp. resistance up to 200 c ) , ip 55 weather proof pole box of inner dimension 200xl60x98mm ( ns ) complete with suitable arrangement for fixing of 2 nos of 6 to 32 amp single pole mcb & 63 amp. double pole isolator ( mcb / lsolator excluded ) with neutral link duly shorting on din channel with2 nos of ms clamps with 55 back plate of suitable size with danger monogram property printed on the cover etc as reqd. as reqd....

Due Date : November 21, 2023

Tender Value : ₹ 90925.0

View Tender
3
Delhi Jal Board - Delhi

40535866 improvement of lighting system at je store giri nagar and newly constructed sriniwaspuri sewer store in kalkaji constituency ac 51. , s / o 20w led batten light. djb sor2022 item code 19.1.2 , s / o 70w led street light. djb sor2022 item code 19.10.6 , s / o 450 mm size exhaust fan. djb sor2022 item code 20.2.3 , s / o 1200 mm size ceiling fan. djb sor2022 item code 20.1.2 , s / o pvc / xlpe insulated ( heavy duty ) electrical cable for working voltage up to and including 1100volts to is:1554 ( part i ) 1988 / 7098 ( part i ) with aluminum conductor isi marked power cable aluminum for size 10 sq.mm 2 core armored cable. make: any djb approved make , wiring for light point / fan point / exhaust fan / call bell point / with 1.5 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with piano type switch, phenolic laminated sheet, suitable size ms box and earthing the point with 1.5 sq. mm frls pvc insulated copper conductor single core cable etc. as required. dsr ( e&m ) 2022 1.10.3 group c , wiring for circuit / sub main wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required. 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire dsr ( e&m ) 20221.14.2 , wiring for circuit / sub main wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required. 2 x 4 sq. mm + 1 x 4 sq. mm earth wire dsr ( e&m ) 2022 1.14.3 , wiring for light / power plug with 4x4 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit alongwith 2 nos. 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required. dsr ( e&m ) 2022 1.13 , supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required.5 / 6 a switch dsr ( e&m ) 20221.23.1 , supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required.3 pin 5 / 6 a socket outlet dsr ( e&m ) 2022 1.23.4 , supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required.15 / 16 a switch dsr ( e&m ) 2022 1.23.3 , supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required.6 pin 15 / 16 a socket outlet dsr ( e&m ) 2022 1.23.5 , supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. dsr ( e&m ) 2022 1.25 , installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length ( upto 30 cm ) with 1.5sq. mm frls pvc insulated, copper conductor, single core cable etc. as required. dsr ( e&m ) 2022 1.44 , laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. dsr ( e&m ) 2022 7.7.1 , supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 12 way, double door dsr ( e&m ) 2022 2.3.3 , supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. single pole dsr ( e&m ) 2022 2.10.1 , supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. double pole dsr ( e&m ) 2022 2.10.3 , supplying and fixing of 32 mm dia x 2.00 meter long g.i. pipe ( medium class ) bracket for mounting of fluorescent / hpmv / hpsv street light fitting on pole including bending the pipe to the required shape, 2 nos. 40 mm x 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. dsr ( e&m ) 2022 12.34 , earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal / coke and salt as required dsr ( e&m ) 2022.5.2 , providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required dsr ( e&m ) 2022.5.16...

Due Date : November 13, 2023

Tender Value : ₹ Ref. Documents

View Tender
4
Municipal Corporation Of Delhi - Delhi

40525898 tender for improvement of ei and fans in spl metropolitan magistrateunder cspz.; 1 improvement of ei and fans in spl metropolitan magistrateunder cspz. 2 od13225 / 2023 2024: rewiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm frls pvc insulated copper conductor single core cable as earth wire in existing surface / recessed steel / pvc conduit including dismantling as required group c 3 od13226 / 2023 2024: wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required group c 4 od13227 / 2023 2024:supply, installation, testing and commissioning of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current ( bldc ) motor, class of insulation: b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value ( cm / m / w ) minimum 6.00, air delivery minimum 210 cum / min , 350 rpm ( tolerance as per is : 374 2019 ) , thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c ( max. ) , insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. 5 od13228 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ( c ) 15 / 16 amp switch 6 od13231 / 2023 2024:supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 12 way double door 7 od13232 / 2023 2024: supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5 / 6 a & 15 / 16 a modular socket outlet and 15 / 16 a modular switch, connections etc. as required 8 od13233 / 2023 2024:supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required. ( b ) 12 module ( 200 mmx150 mm ) 9 od13234 / 2023 2024:supplying and fixing following rating, double pole, 240 v, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required.63 a 10 od13235 / 2023 2024:supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.single pole 11 od13236 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ( e ) bell push 12 od13237 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ( d ) 6 pin 15 / 16 amp socket outlet 13 od13239 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ( b ) 3 pin 5 / 6 amp socket outlet 14 od13240 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ( a ) 5 / 6 amp switch 15 od13241 / 2023 2024:supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.25 cm 16 od13242 / 2023 2024: supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required. ( c ) 3x 4 sqmm 17 od13243 / 2023 2024: supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required. ( a ) 3x 2.5 sqmm 18 improvement of ei and fans in spl metropolitan magistrateunder cspz. 19 122.2.131:supply, installation, testing and commissioning of 1.5 ton, 5 star rated inverter split air conditioner with rotary compressor ( r32 refrigerant ) having copper condenser complete with outdoor unit as required. 20 122.2.39:s / i / t / c of led tube type luminaire 20 watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient leds with the following: ( a ) total system wattage 20 watt + / 5% ( b ) luminous efficacy lumens / watt >=95 ( c ) power factor >=0.95 21 122.2.113:s / i / t / c of 2 tr, 2 star / 3 star, window air conditioner having copper condenser coil, rotary compressor and r32 / better refrigerant....

Due Date : November 14, 2023

Tender Value : ₹ 2.57 Lakhs

View Tender
5
Public Works Department - Delhi

40516464 tender for renovation of the office of samagra siksha at lucknow road delhi 54 ( sh electrical installation work ) . 1 rewiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm frls pvc insulated copper conductor single core cable as earth wire in existing surface / recessed steel / pvc conduit including dismantling as required. i ) group c 2 wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. i ) group c 3 supplying and drawing following sizes of fr pvc insulated copper conductor , single core cable in the existing surface / recessed steel / pvc conduit as required. i ) 3 x 1.5 sq. mm 4 3 x 4 sq. mm 5 3 x 6 sq. mm 6 6 x 4 sq. mm 7 supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. i ) 5 / 6 amps switch 8 15 / 16 a switch 9 3 pin 5 / 6 a socket outlet 10 6 pin 15 / 16 a socket outlet 11 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 12 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5 / 6 amps modular socket outlet and 5 / 6 amps modular switch, connection, painting etc as required. 13 supplying and fixing of following ways surface / recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a, tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs ( but without mcbs and incomer ) as required. ( note : vertical type mcb tpdb is normally used where 3 phase outlets are required. ) i ) 8 way ( 4 + 24 ) , double door 14 supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. i ) single pole 15 supplying and fixing following rating, four pole, 415 v, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required. i ) 100 a 16 providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. i ) 100 a, 16 ka, tp mccb 17 250 a, 36 ka, 4p mccb 18 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15 / 16 amps & 5 / 6 amp modular socket outlet and 15 / 16 amps modular switch, connection, painting etc. as required. 19 supplying & fixing suitable size gi box with modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, “c” curve including connections, painting etc. as required. 20 supplying and fixing following size / modules, gi box along with modular base & cover plate for modular switches in recess etc. as required. i ) 3 module ( 100 mmx75 mm ) 21 8 module ( 125mmx125mm ) 22 supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required. i ) 3 module 23 8 module 24 supplying, installation, testing and commissioning of lt panel floor mounted modular, sectionalized, compartmentalized, front and rear openable double door with double lockand key arrangement having 25 mva breaking capacityof suitable size fabricated from crca sheet steel of 2 mm thickfor frame work, enclosure and doors 3 mm thick for gland plates with stiffeners wherever required, 300mm deep, duly powder coated and painted complete with 4 strip aluminum bus bars of 315 amp rating complete with connections, interconnections internal wiring along with connection wiring from main bus bar to mccb with copper cable of 16 sqmm sizes, earthing complete i / c providing suitable angle iron frame with 30cm legs ground in suitable foundation etc as required. ( the board shall be dust & vermin proof with degree of protection of ip 42 as per is : 12063, free standing type, mounted on base channel of ms section not less than 100 mm x 50 mm x 5 mm ) . 25 s.i.t.c of surface / wall mounted ( integrated type ) 18to20 w led batten fitting 1200 mm long ( n / s ) made out ofcrca sheet duly power coated / aluminum extruded body confirming to ip 20, suitable for operation on 150 v to 270 v, 50 hz ac supply, having power factor = 0.90, cri = 80, luminaries efficacy = 100 lumen / watt , driver efficiency > 85%, 2.5 kv surge protection, l 70 life, 50, 000 burning hours. complete i / c dismantling of existing fitting, connection, etc complete as reqd. 26 s.i.t.c of 70 80 watt led street light fittings confirming to ip 66, made out of aluminum bodyfor installation on pole / wall surface, suitable for operation on 150 v to 270 v, 50 hz ac supply, having power factor > 0.95, cri > 80, luminaries efficacy = 100 lumen / watt , ( 5000 to 6500k ) driver efficiency > 85%, 10ka surge protection, l 70 life 50, 000 burning hours. complete i / c dismantling of existing fitting, connection, etc. complete as reqd. 27 sitc of 34 to 36 watt 600mm x 600mm nominal size ledrecess / surface mounted fitting suitable for operation at 150 to 270volt, 50 hz + / 5% frequency, ( 6000k ) , crca sheet duly power coated / aluminum body, power factor > 0.95luminaries efficiency = 100 lumen / watt , driver efficiency > 85%, ip 20 class protection, 2.5 kv surge protection, l 70 life 50.000minimum burning hours, complete with electronic driver in the existing false ceiling with the help of suitable chain & wiringwith 1.5 sq.mm. frls pvc insulated copper conductor single core cable i / c dismantling of existing fittings if reqd i / c connection, testing etc complete as reqd at site. 28 supplying and fixing of1200 mm sweep ac ceiling fan with three star rating and above complete with all accessories but without regulator i / c wiring the down rod of standard length ( upto 30 cm ) with 1.5 sq mm frls pvc insulated copper conductor cable i / c dismantling the existing non working fan etc complete as required. 29 s.i.t.c of 300 mm sweep 900 rpm heavy duty isi marked exhaust fan with louvers & shutters in the existing opening, including making good the damage, connection, testing, commissioning etc. as reqd. 30 supplying & fixing co2 type fire extinguisher isi marked conforming to is: 15683. capacity 4.5 kg. complete with delivery hose horn, squeeze grip / wheel type release valve, locking arrangement, operation manual and bracket. operating temperature: 30ºc to + 55ºc fire extinguisher complete with all accessories i.e. discharge horn, isi mark valve, operating manual etc. as required ( is 15683 ) 31 supplying & fixing powder fire extinguisher ( gas cartridge type ) capacity 06 kg duly isi marked conforming to is: 15683:2006, with is 14609, isi marked abc powder; complete with is 4947 isi marked gas cartridge with squeeze grip release valve, discharge pipe, locking arrangement, pressure gauge, operation manual and bracket. operating temperature: 10ºc to + 55ºcextinguisher complete with first filling, isi mark valve, operating manual etc. as required ( is 15683:2006 ) 32 less credit for old dismantle material i ) switch / socket 33 100 a, mccb 34 250 a, mccb 35 panel 36 light fixtures 37 ceiling / exhaust fan...

Due Date : November 10, 2023

Tender Value : ₹ 9.03 Lakhs

View Tender
6
Delhi University - Delhi

40497904 replacement of defective switch, socket, sheets etc. in the vacant flat no. c 11, c 12, c 15, c 16, c 17, c 18, c 19, c 20, c 57 c type flats and other allied minor electrical work in various c type flats at dhaka complex, university of delhi; 1 rewiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface / recessed steel / pvc conduit including dismantling as required.group b 2 s / f the following size / modules g.i box along with modular base and cover plate for modular switches in recess etc as reqd. 3 1 or 2 module 4 3 module 5 6 module 6 8 module 7 supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 8 5 amps switch 9 5 amp socket 10 15amps switch 11 15 amp socket 12 bell push 13 supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 14 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5 / 6 & 15 / 16 amps modular socket outlet and 15 / 16 amps modular switch, connection etc. as required. 15 supplying and fixing brass batten / angle holder including connection etc. as required. 16 supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box / wooden block including connection etc as required. 17 supplying and fixing call bell / buzzer suitable for single phase, 230 volts, complete as required. 18 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 2+ 12 way, double door 19 supplying and fixing 5 amps to 32 amps rating, 240 / 415 volts, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.single pole 20 single pole 21 single pole and neutral 22 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required. 23 1 x 1.5 sq.mm 24 2 x 2.5 sq.mm 25 2 x 4 sq.mm 26 2 x 6 sq.mm 27 supplying and fixing of following sizes of heavy duty pvc conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm 28 supplying and fixing suitable size g.i. box with modular plate and cover in front or in recess including providing and fixing 25a modular socket outlet and 25a modular sp mcb c curve including connections, painting etc. as required. 29 wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required 2 x 10 sq. mm + 1 x 10 sq. mm earth wire 30 s / f of 9 watts led bulb with suitable brass holder i / c making connection as required. 31 s / f of singlebox type fitting complete with all accessories i / c making connection etc as reqd.tmc 501 1xt led 22w p3242 i / c having 1 nos of stellar 20 watt led tubelight in the existing fitting as reqd. ( philips ) 32 s / f of led fancy light fitting complete with all accessories on surface as approved by engineer in charge i / c making connection as required. ( philips make ) comet model 33 s / f of 20 watts stellar bright led tubelight having 2100 k lumens in the existing fitting i / c making connection etc. as required. 34 s / f of 1200 mm dia. heavy duty ceiling fan complete with all accessories i / c making connection etc. as required. 35 dismantling the existing accessories and depositing the same at engineering store....

Due Date : November 09, 2023

Tender Value : ₹ 4.95 Lakhs

View Tender
7
Delhi University - Delhi

40478670 tender for minor electrical work to be carried out in room no. 17a, 17b at gwyer hall, university of delhi; 1 wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with piano type switch, phenolic laminated sheet, suitable size m.s. box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc as required. group c 2 rewiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface / recessed steel / pvc conduit including dismantling as required.group b 3 s / f the following size / modules g.i box along with modular base and cover plate for modular switches in recess etc as reqd. 4 6 module 5 12 module 6 supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 7 5 amps switch 8 5 amp socket 9 15amps switch 10 15 amp socket 11 supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 12 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required 13 1 x 1.5 sq.mm 14 2 x 2.5 sq.mm 15 2 x 4 sq.mm 16 supplying and fixing of following sizes of heavy duty class pvc conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm 17 s / f of 10 dia heavy duty ventilation fan complete with shutter i / c making connection as required. crompton / havells or equivalent make 18 s / f of 1200 mm dia. heavuty duty ceiling fan complete with accessories i / c having suitable down rod and making connection as required. 19 s / f of single box type fitting complete with all accessories i / c making conection etc. as required. tmc 501 1xt led 22w p3242 i / c having 1 nos. of stellar20 watts led tubelight in the existing fitting as required. 20 dismantling the existing accessories and depositing the same at engineering store....

Due Date : November 16, 2023

Tender Value : ₹ 38844.0

View Tender
8
Delhi Jal Board - Delhi

40341085 tender for procurement of electrical items and renovation of electrification work with some allied works at rwph bawana 1 wiring for lightpoint / fanpoint / exhaust fan point / callbell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvcinsulated copper conductor single core cable etc. asrequired. group c 2 wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed steel conduit as required.2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire 3 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 4 2 x 4 sq. mm + 1 x 4 sq. mm earth wire 5 2 x 6 sq. mm + 1 x 6 sq. mm earth wire 6 supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5 / 6 amps switch 7 15 / 16 a switch 8 3 pin 5 / 6 a socket outlet 9 6 pin 15 / 16 a socket outlet 10 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 11 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 12 supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required.3 module ( 100mmx75mm ) 13 6 module ( 200mmx75mm ) 14 8 module ( 125mmx125mm ) 15 12 module ( 200mmx150mm ) 16 mccb with thermomagnetic release and terminalspreaders in existing cubicle panel board includingdrilling holes in cubicle panel, making connections, etc. as required.125 a, 36 ka, fpmccb 17 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 6 way , double door 18 6 way ( 4 + 18 ) , double door 19 supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 5a to 32a single pole and neutral 20 double pole 21 63 amp tpn 22 supplying and fixing 20 a, 240 v, spn industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 a c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 23 s / o 20 watt higher wattage decorative ultra slimpolycarbonate led lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack. 24 sitc of 1200 mm ac ceiling fan including connection with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable etc. as required. ( make:havells / cg / orient / usha / almonard& other reputed oem makes ) 25 supplying, installation, testing and commissioning of 450 mm sweep, 1400 rpm, single phase heavy duty exhaust fan in the existing opening, i / c connection etc as required. ( havells / cg / orient / usha / almonard& other reputed oem makes ) 26 supplying, installation, testing and commissioning of 600 mm sweep, single phase heavy duty air circulator in the existing opening, i / c connection etc as required. ( havells / cg / orient / usha / almonard& other reputed oem makes ) 27 fabrication of the ms structure as per the site requirement by the ms pole 28 fabrication of ms platform by the chuckered sheet as per the site requirement...

Due Date : October 30, 2023

Tender Value : ₹ Ref. Documents

View Tender
9
Military Engineer Services - Delhi

40319565 provision of certain sanction work in the area of age b / r i and age e / m under ge ( central ) delhi cantt 10 1 excavation in trenches n exc 1.5 mtr wide & n exc 1.5 mtr deep and getting out in soft / loose soil 2 m&l pcc ( 1:5:10 ) type e 2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified. 3 m&l for brickwork with subclass b bricks, straight or cirved on plan exc 6mtr mean radius, built in cement mortar 1:6. 4 s&f pre painted galvalume aluminium zinc coating gi based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified. 5 s&f mild steel rolled section or hollow pipes ( square or round pipe ) as in main and cross beam, hip and jack rafter, purlins, where connected to common rafter and running rails fixed with cleat or other connecting plates etc. complete all as specifed and directed. 6 m&l painting two coats of synthetic enamel paint over a coat of red exide including preparation of new steel surfaces of any description over 10cm in width or grith not other wise described. complete all as specified and directed. 7 m&l providing cm 1:2:4type b 0 12.5 mm graded agg. in precast lintels inclincluding necessary form work complete. 8 m&l for tmt bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.90mm dia or securing with clips. 9 m&l for tmt bars 5mmand over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.90mm dia or securing with clips as in stirrups, spaces and binders. 10 m&l for rendering 15mm thick on fair faces of brick or concrete surface in cement mortar 1:6 mixed with integral water proofing compound. 11 solid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with ms square tube, supplying and fixing in opening as per specification & drawing. 12 factory made solid panel pvc door shutter 30mm thick ( style ) consisting of frame made out of ms tubes for top & bottomrails. ms frame shall be covered with heat moulded plain colour pvc c channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail ; panelling of plain colour pvc sheet to be fitted in the ms frame welde / sealed to the styles and rails with suitable pvc sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing. 13 s&f steel ventilator with top hung shutter including hinges, steel peg stay including two coats of synthetic enamel paint over a coat of red oxide primer complete. 14 s&f galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm & fixed with tinned tacks or galvanised wire staples. 15 s&f 150mm aluminium anodised barrel tower bolts of extruded section and fixed. 16 s&f 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed. 17 s&f 125mm aluminium handles, cast type , anodised and pattern / design as approved. 18 s&f ms butt hinges medium wt of size 100 mm complete all as specified and directed. 19 demolition of cement concrete ( unreinforced ) in ground floors and pavings n.exc 15cm thickness ( below or above ground level ) . 20 m&l for 25mm thick cement concrete type b 0 1:2:4 ( 12.5mm graded aggregate ) as in sub floor. 21 m&l for non skid ceramic tiles, coloured, 7 to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.11 sq m but not exceeding 0.18sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified. 22 m&l non skid ceramic coloured tiles 7 to 8mm thick ( square / rectangular ) area of each tile n. exc. 0.11 sqm but exc. 0.18 sqm, in wall, skirting etc set and jointed in neat cement slury & pointed in coloured cement to match laid over a 10mm thick rendering in cm 1:4. 23 m&l vitrified ceramic light shade coloured tiles 10mm thick square / rectungular polished area of each tile not exceeding o.36 sqm in floor etc set and jointed in neat cement sluarg and painted in white or coloured cement to match laid over 15mm thick screed bed of cm 1:6 . 24 ditto as item no 16above but as in skirting over rendering 10mm thick in cement mortar 1:4. 25 taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. 26 m&l 15mm thick rendering on any face fair faces of brick work or concrete surfacesin cement mortar 1:4 finsihed the surfaces even and smoothwithout using extra cement. 27 m&l glazed ceramic coloured tiles 450mm x 300mm x 6 to 7mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick bedding layer in cement mortar ( 1:4 ) including necessary cutting as per site requirement complete all as specified and directed by engineer in charge. 28 m&l 50mm thick pcc 1:2:4type b 1 using 20mm crushed stone aggregate as in plinth protection and like finished even and smooth without using extra cement. 29 m&l for preparation of new plastered wall surfaces and applying three coats of white wash. 30 m&l for preparation of new plastered wall surfaces and applying two coats ofcement base paint 31 s&f vitreous china wash down water closet pan ( pedestal pattern ) , white, including flush pipe of polyethylene of low or high density or pvc 32 mm dia., plastic water closet seat closed pattern with cover and hinging device and trap with connection in repairscomplete all as specified. 32 s&f chromium plated jet for ewc complete all as specified. 33 s&f in repairs vitreous china wash hand basin, white, flat back, size 550 x 400 mm including fixing with brackets exclusive of fixing of supply and waste pipe and 32 mm chromium plate waste fitting with long screwed shanks and fly nuts complete all as specified. 34 s&f pvc valve less syphonic action type low level flushing cistern white of capacity 10 ltrs with inlet valve float and fixed to water closet with pvc flushing pipe 32mm dia 35 s&f in repairs pvc connections 15 mm size with ptmt nuts of length 450 mm in repairscomplete all as specified. 36 s&f brass chromium plated shower rose 125mm size for iron pipe or for unions and fixed to 15 mm bore steel tube in repairscomplete all as specified. 37 s&f in repairs 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified. 38 s&f bib taps, cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore steel tube fixed in repaircomplete all as specified. 39 s&frotational moulded polythylene water strarge tanks 500 ltr ( cylinderical vertical with closed top ) hoisted and fiexed in position all as per specified in ssr pt 1. 40 s&f15mm boretubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors 41 s&f 15mm bore stop valve / angle valve cast copper alloy chromium plated fancy type screwed down, high pressure, with crutch or butter fly handles fixed in repairs. 42 s&f 20mm bore brass ball valves, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed. 43 s&f 110mm bore pvc ( swr ) soil, waste and vent pipe, in any length , with rubber joints, laid in trenches or in floors. 44 s&f pvc ( swr ) 110mm bore bend of any radius. 45 s&f in repairs pvc ( swr ) bends ( 75mm bore ) including jointingwith solvent cement complete all as specified. 46 s&f 75mm bore pvc ( swr ) soil, waste and vent pipe, in any length , with rubber joints, fixed vetically on wall. 47 s&f pvc ( swr ) floor traps 75mm bore and jointing to waste pipe in solvent cement. 48 s&f in repairs pvc ( swr ) vent cowl of 110 mm bore. 49 s&f in repairs pvc ( swr ) vent cowl of 75 mm bore. 50 s&f in repairs pvc ( swr ) junction double, ( double t, 110 mm bore ) , equal or unequal , including jointingwith solventcement complete 51 s&f in repairs pvc ( swr ) junction double, ( double t , 75 mm bore ) , equal or unequal complete, including jointingwith solvent cement. 52 s&f sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe including connecting union overall size 1145mm x 510mm x 200mm with bowl size 510mm x 400mm x 200 mm including taking out existing china ware sink with waste fittings complete all as specified. 53 surface excavation n.exc ( not exceeding ) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed. 54 m&l pcc ( 1:4:8 ) type d 2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified. 55 sand filling under floors or in foundations incl. watering and consolidation. 56 m&l 60mm thick interlocking paver block with grey cement and with pigment of any size and shape confirming to is 15658 2006, m 35 grade as approved by e i c laid in flooring and joints filled / broomed with fine sand. 57 m&l for pcc 1:3:6 type c1 using 20 mm graded stone aggrgate as in coping to wallcomplete all as specifed and as directed. 58 taking down chowkats or frames exc. 1.5sqm but n.exc 4 sqm eachwith shutters ( without taking off shutters from frames ) , complete all as specified. 59 taking down chowkats or frames n.exc. 1.5 sqm ( without taking off shutters from the frame ) . 60 s&f steel windows with side hung shutters incl box type hing, steel handle and peg stay complete with glazing bar. 61 all as per item no 61 abovebut without glazing bars. 62 m&l two coats of syntheticenamal paint to steel surfaces of any discription over 10 cm width or girth not otherwise described after preparation complete. 63 s&f pressed steel frames, size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.. 64 s&f pressed steel frames, size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. 65 providing cement concrete type c 0 1:3:6 ( 12.5 mm graded agg ) as for pressed steel chowkhats. 66 s & f 30 mm thickflush shuttersolid core construction, with block board core and plywood face panels, commercials type on both sides complete all as specified. 67 s&f factory made 35mm thick second class hard wood glazed and skelton door shutters , open rebated and prepare to receive glass, gauge etc, size of members of shutters as specifed in ssr part i, section 8 clause 8.24 ( b ) . 68 m&l two coats of synthetic enamel painting on wooden surfaces not otherwise described over 10cm width or girth over a coat of pink primer inclding prepration of newly untreates surfacescomplete all as specified and directed. 69 supply only butt hinges, 100mm medium weight, cold rolled mild steel. 70 m&l cement concrete 1:4:8 type d 2 using 40mm graded stone agg as in bed to drain pipe, incl packing under and haunching against the sides of pipe 150mm bore after they are laid and tested. 71 m&l, 150mm internal dia salt glazed storeware drain pipes laid in treanches and jointed as secified. 72 m&l for precast manhole cover rcc 1:2:4 type b 1 using 20mm graded stone agg as in cover slab and like axcept set in cement mortor 1:4 complete incl necessary form work. 73 returning filling in including spreading, levelling, watering and well ramming in layers n exc 25 thick in soil. 74 removal of surplus spoil to a distance exc 50 mtr and n exc 100 mtr and depositing where directed at a level n exc 1.5 mtr above starting point in soil. 75 m&l for providing 75 mm thick cement concrete1:2:4 type b2 ( 40 mm graded aggregate ) as in hard standing laid in alternate bays complete all as specified and directed by engineer in charge. 76 m&l three coats white wash on ceiling undecorated surfaces including prepration of newly plastere surfaces. 77 m& l for applyingtwo coats of oil bound distemper onnew wall surface with roller brushcomplete all as specified and directed. 78 s& f ms framed work such as grills, gratings etc., with ends of bars shouldered and / or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to fe 290 or fe 165 complete all as specified and as directed. 79 s&f powder coated anodiesed aluminium frame for partition, doors, windows, ventilators with one or more rebates incl. joining cleat for fixing etc. complete all as specified. 80 s&f powder coated anodiesed aluminium door shutters, aluminium section weighing 0.55 kg / m incl. necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 nos in each doors, brass 2 lever mortice lock verticle type size 100mm, hinges, anodiesed aluminium snap beading screw withetc. 81 s&f powder coated not less than50micron anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg / m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long ( 1 no. ) hinge type b 21 100mm long ( 2 no. ) suitable handle ( 1 no. ) complete all as specified 82 s&f anodised aluminium grill ( anodised transparent or dyed to required shade according to is :1868 with minimum anodiccoating of grade ac 15 ) of approved design / pattern, with approved stadandered section and fixed to existing window frame with cp brass / stainless steel screws @200mm c / c, incl cutting the grill to proper opening size for ficing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of engineer in charge. 83 s&f 4.8 mm thick sheet glass, ordinary quality and glazing in aluminium partition, door or window with solar control files 50 micronin squares exc 0.5 sqmeach pane. 84 s&f door closer aluminium ( extruded section ) hydraulically regulated designation no. 03, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kgs. 85 supply and fixing floor door stopper 140mm long of aluminium alloy and tongue, anodised with hard drawn steel spring fixed in floor etc completeall as specified & directed by engineer in charge. 86 demolition of brick work or stone masonry built in cement mortar in any position including segregating serviceable / unserviceable bricks / stones complete all as specified and directed by engineer in charge. 87 supply & fixing steel water tubes of size 15mm bore ( medium grade ) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors / concealed in wallscomplete, all as specified & directed by engineer in charge. 88 s&f15mm dia brass chromium plated mixer for mixing hot and cold water screwed down for iron pipe and fixed to whb including taking out existing mixer from old whb, complete all as specified. 89 s&f 15mm dia brass chromium plated two in one wall mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall and shower, complete all as specified. 90 s & f in repaircp health faucets with crutch or push handle, screwed down with 1.5mtr cp flexible pipe, screwed for pipe, 15mm dia, fancy type, cast copper alloy. chromium plated long body completeall as speciifed. 91 s & f in repairs glass corner 300 mm radius of 10mm thick toughned glasswith cp brassrailng, fixed with screws fancy type, complete all as specified . 92 s & fixedin repairpvc mirror cabinetmade of high intensity polythene of biggar size 500 x 400 x 120 mm complete all as specified. 93 s&fin repairbrass chromium platedtoilet paper holder, complete all as specified. 94 s&f stainless steel gratings 100mm bore size fixed with cement motar complete all as specified. 95 s&f in repair brass chromium plated soap dish, complete all as specified. 96 s&f in repair stainless steel peg set of 06 peg, 45 centimeter long, complete all as specified. 97 s&f in brass chromium plated tubular towel rail, 20mm dia, 60cm long between flange including brackets. 98 s&f in brass chromium platedtowel rack60cm long between flange including brackets. 99 s&f in repair pvcfloor trap square type with cockroch proofing cp grating with or without hole including provision ofjointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified. 100 s&f anodised aluminium snap grade of size 600 x 600mm frame work for false ceiling all as specified. 101 s&f hangers 6mm dia g i ( upto 1200mm length ) asjusting level fixed to roof slabs by means of ceiling cleats made out of g i flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long. 102 exposed metal frame ceiling with 8mm thick calcium silicate board of silicious and calcareous material reinforced with cellulose fibre for fixing in 600mmx600mm grid ( frame work for ceiling shall be measured and paid seprately ) . 103 s&fcurtain rod made out of 25mm dia ( outer dia ) pipe having thickness 0.63mm , pvc coated and colour / pattern, over all dia 28 to 29 mm including brackets complete all as specified and directed. 104 excavating in post holessoft / loose soil ( or similar holes ) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, 105 m&l for steel work in tubular trusses including special shaped washer etc. complete using erw or induction butt welded tubes complete all as specified and directed. 106 dismantling boarding any description ( board / plywood ) fixed in any position with screw, complete all as specified. 107 s&f pvc 18 / 19mm thick pvc moulded solid board, one side prelaminated for cabinet boxes, shutters etc. with shelf and shutters full size fitted under / above kitchen cooking platform and other platform complete all as direction of the engr in charge and the manufacturers specifications and drawings. 108 s&f continuous ( piano ) hinges, mild steel, bright finish or electrogalvanised, width of flaps ( when open ) 30 mm, complete all as specified. 109 s&f ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified. 110 s&f stainless steel handle of size 150mm size long complete all as specified. 111 supply and fix 40mm dia, cup board knobs fixed with nuts, screw and washer of brass polished , complete all as specified. 112 m&l for 2nd class hardwood plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified. 113 s&f stainless steel handle of size 200mm size long complete all as specified. 114 s&f 300mm long, stainless steel of aisi 316 grade, sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified. 115 s&f brass chromium plated magic eye complete all as specified. 116 supply and fix150mm mild steel ordinary rat tail rod pattern springs including roller and roller plateincluding welding where ever necessary complete all as specified and directed. 117 demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified. 118 m&l for rectified coloured ceramic tiles 300x600 x 7 to 8mm thick, as in vertical surfaces of wall as dado / skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in cm 1:4 all as directed. 119 m&l for rectified coloured ceramic tile 300x300x6 8 mm thickas in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in cm 1:6 complete all as directed. 120 dismantling floor, hearthwall tile incl cement mortar bedding ( but not backing ) removing serviceable tiles and rubbish out of premises, all as specified. 121 material and labour for preparation of new plastered surfaces as of walls and applying twocoats of weather proofing exterior acrylic emulsion paint of duluxweather shield max or apex ultima from asian paintover one coat of primer from the same manufacturerwhite lime wash complete all as specified and directed. 122 dismantling of 100 mm dia cast iron pipe ( soil / waste / vent ) with fittings etc fixed to walls, ceiling, on floors & from trenches if requiredincluding taking out any type of joints complete all as specified. 123 all as per item 124 above but 75mm dia 124 s&fsteel windows including pressed steel frame made of 1.25 mm thick ms sheet of size 125x60 mm double rebated with side hung shutter both glaze, gauge and guard bars of 12mm square bars placed horizontally / vertically @ 125mm c / c , including box type hinges steel handless and peg stay , tower bolts and including glaze / gauge and guard bars dovetailed or welded , incl one shop coat of red oxide primer ( wire gause and glass pan shall be measured seperately ) . incl m&l for providing pcc 1:2:4 ( 12.5mm graded stone aggregate ) to fill the frame and making good complete all as specified and directed by engineer in charge . 125 m& l for preparing the entire surface withapplying2 3 mm thick birla / jk wall care putty on walls surface finished even and smoothcomplete all as specified and directed.putty to be procured directly from manufacture.. ( item is executed in stage and passed. ) 126 s & f in repairs stainless steel of ae si 316 grade 100 mm size mortice lock vertical type, 4 levers with key in duplicate, incl 2 no suitable handle fixed to shutters with screws, complete all as specified. 127 supply and fix in repair chromium plated brass angle valve dual type suitable for 15mm bore pipe, complete all as specified. 128 s&fin repair 15mm dia brass chromium platedsink mixer for mixing hot and cold water screwed down for iron pipe and fixed to kitchen sink including taking out existing mixer , complete all as specified. 129 s&f mild steel as in hand rail, balusters, noising to steps, post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, drilling, bolting or riveting etc, conforming to fe 290 , gde e 165 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by engineer in charge. 130 supply only 3.15 mm dia galvanised steel chain link fencing, 100x100 mm mesh, made up into mattrsses or cages, lapped, wired a all as specified. 131 fixing only chain link fencing including line wires any mesh, size and type to any to any type of standard, rail, straining bolts, etc. including provn of winding wire all as specified. 132 m&l mild steel round bars 10 mm dia conforming to fe 410 w ( gde e 250 ) quality a or fe 290 ( gde e 165 ) for use in chain link fencing as wind tie all as specified. 133 mild steel screw bolts ( machine made ) with hexagonal or square heads at one end screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 30 cm and dia of neack exc 12 mm but not exc 20 mm complete all as specified and as directed by engineer in charge. 134 s&fsteel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets ( for securing wire mesh etc. ) including all necessary drilling, bolting or riveting, etc., and similar work conforming to fe 290 gde e 165 complete all as specified and directed. 135 s&f 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with srew. 136 m&l providing and applying the plaster with single component ready to use repair mortar ( smart care repair mortar or equivalent ) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat: sbr polymer ( @ 10% of cement weight ) modified cementious bond coat @ 2.2 kg cement / sqm of surface area mixed with specified portion of ap smartcare or equivalent repair polymer including taking down existing roof treatment of any type including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified land as directed. note: the application shall be executed on any type of surface and on horizontal / vertical areas. 137 m&l providing and applying smartcare dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having sun reflectivity index ( sri ) of 105 on horizontal / vertical surfaces of roof / wall / chajas in multiple coats @2.0 litre / sqm. primary [ coat is self priming coat of elastomeric waterproofing liquid ( dilution with water in the ratio of 3:1, damp proof : water ) and other coats to be applied undiluted. the coating needs to be reinforced with 40 gsm geotextile, to sandwiched between 2nd & 3rd coat of coating. the application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of engineer in charge. 138 taking up or down 15 mm dia gi tubing and connections including cleaning for re fixing, complete all as specified. 139 m&l for rendering 15mm thick in cement mortar 1:4 withtwo coat of tape create mixed ( 1:2 ) withcement paste @ 500 gm per sqm as per manufacturere instructionin sunken portion of toilets, finished even and smooth without using extra cement and applying a coat of hot blown bitumen 85 / 25 grade as the rate of 0.70 kg per sqm and applying one coat of hot blown bitumen 85 / 25 grade at the rate of 2.6 kg per sqm and one layer of 0.5mm thick fibre tissue over it and finally third layer of hot blown bitumen 85 / 25 grade at the rate of 2kg per sqm including getting out, complete all as specified. 140 s&f in repair vitreous chinaware coloured oval shape wash hand basin ( whb ) size 550mm x 400mm complete, ist quality, including provision of pair of mild steel angle iron brackets of suitable size duly painted and cutting for and pinning in ends of brackets in walls & making good & including providing and fixing of suitablewaste pipe and waste fitting complete all as specified. 141 s&f in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide withbrass chromium plated bracket guard and railing 60cm long. 142 cutting holes in brick wall built in cement mortar for inserting hold fasts, depth of embedded postion of hold fast / lugs measured from the face thejambs into the wall exc half brick but n.exc one brick thick and making good the dismantaled portion in cement mortar 1:3 or in cement concrete 1:2:4 type b 1, using 20mm graded stone agg complete all as specified upto six storey height. 143 m&l external endura chequered cement concrete tiles 30cmx 30cmx 10mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 15mm thick screed in cement mortar 1:6 144 m & l for one light / fan point controlled by one switch wiring complete with, pvc insulated and unsheathed cable 1.5 sq mm ( nominal area ) multi stranded copper conductor single core conforming to is : 694including medium duty surface conduit unplasticised pvc conduit conforming to is : 9537 ( part 3 ) andisi marked20 mm diawith concealed / cashing cappingin wall pressed steelterminal boxes1.6 mm thick of required. size ( factory made ) with top coverlaminated sheets of required colour for fixing piano switches complete with all accessories and all as specified including pvc insulated and unsheathed cable 1.5 sqmm ( nominal area ) multi stranded copper conductor single core conforming to is : 694 of green colour asearth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified and directed. 145 s & f water heater storage type ( geyser ) vertical type with suitable size of fastner and incl provision and connecting up of ss braided pipe with adopter for inlet and outlet water connection, having adjustable knob for temperature control and inner tankmaterial of superior glass lined tank and outer body material abs with high pressure with standing capacity upto 8 bar pressure completeall as specified of capacity 15 ltr having heating element 2 kw and not less than 5 star rating with minimum two year warrant on product, minimum 3 years warranty on heating element and minimum 7 years warranty on inner tank.note : old unservicable geyser will be deposoted in mes yard. 146 s&f led 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass / non yellowing polycarbonate cover, ip65 protection, system level efficacy of the luminary is > 90 lm / w with a life class of 50, 000 burning hours at l70 criteria, power factor >0.95, driver with voltage range 150 270v, temperature range 0 to 50 deg, driver efficiency >85%, thd<10%, cri>80, color temperature 6000k, surge protection of 2.5 kv, including connecting up with necessary pvc sheathed 3 core 1.5sqmmcopper conductor flexible wire fixed completeallas specified and directed. 147 m&l for ceiling rose, surface polycarbonate isolated body three terminals 148 m&l switch piano flush button type 5 amp sp one way . 149 supply and fixing ventilating fan250 mm sweep, 1250 rpm, non metallic resin body, single phase 240 volts ac 50 hzand connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan completeall as specified and as directed. 150 supply and fix led batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 1000 lm with life time of 50000 burning hours with 70% of its initial lumen maintained. cri > 80, power factor > 0.95, thd < 10%, color temperature > 6500 k , surge protection 2.5 kv in cm ip 20 protected meets led is specifications, voltage range 150 to 270 volts ac, temperature range 0 to 50 degree c, system efficiancy at luminarie level =100 lumens / watt and including connecting up with pvc sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed. 151 m&l for sub main wiring with two single core frls stranded copper conductor cable 1100 volts grade of size 4.0 sqmm and one single core frls stranded copper conductor cable 4 sqmm for earth wire in and including medium grade pvc concealed conduit with all fittings complete all as specified and directed 152 s&fsheet metal enclosure single pole and neutral with a two pin earth plug and socket complete with a mcb sp 20 amp 220 volts, 50 hz, 10ka breaking capacity complete all as specified and directed. 153 s&f mcb db spn 8 way horizontal, ip 43 protection double door 240 v ac 50hz with for mcbspn as incomer and dp / sp mcbs as out going with tinned copper bus bar , neutral link earth link complete. 154 s&f mcb spn 32 amps 240 volts 10 ka 50 hz c curve complete. 155 s&f mcb sp 6 32 amps 240 volts 10 ka 50 hz c curve complete. 156 supply, laying in repairs of pvc under ground xlpe insulated heavy duty electric cables armoured with aluminium conductor, 1100 volts grade, cross sectional area 10 sqmm 2 core laying in trenches, fixed along wall, through gi pipe under floor complete all as specified and directed. 157 s&f for cable protection gi tubing light grade in trenches / fixed to wall / ceiling including required gi fitting of size 40mm dia complete all as specified and directed. 158 supplying laying and cushioning for cable protection in trenches 18 cm thick layer before laying cable and 15 cm thick layer over the cable including well punning complete all as specified and directed. 159 supplying laying sub class ‘b’ bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed. 160 s & f wall mounting air circulator fans ac single phase 230 / 240 v, 1440 rpm of size 600 mm sweep ( 24 ) , 180 watt, aluminium alloy three blade, double ball bearing 90° oscillation, sturdy close mesh guard beatifull design, powerful heavy duty motor, air dilivery 270 m³ / min, mounting on wall complete all as specified and directed by engr in charge. 161 m&l distribution board spn8 way with 200 amp rated bus bar double door. 162 m&l distribution board spn12 way with 200 amp rated bus bar double door. 163 m&l mcb spn 40 amp c curve with 10 ka breaking capacity. 164 m&l mcb dp 63 amp c curve with 10 ka breaking capacity. 165 supply and lay cable xlpe insulated screened pvc bedded, galvanized steel strip and wirearmoured , electric power cables ( heany duty ) 1100 volts grade with stranded alumimium conductor of size 16 sqmm 04 core. 166 m&l earthing complete with gielectrode 600x 600 x 6mm, thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level ( with top edge of earthplate not less than 1.50 mtr below normal ground level connected to gi strip 32x6mm as earthing lead by means of bolt nuts, check nuts, and washers of brass connected including gun metal or phosphorus bronze of sixe 75x75x25mm drilled and screwed including 3 nos 8mm dia 25 mm long hexagonal head screwed all as specified including excavation and earth work and disposal of surplus soil incl 40 mm gi tubing light grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt ppc ( 1:2:3 ) type c 1 ( using 20mm graded stone aggregate ) for earth pit with 40 x 40 x 6mm msangle iron frame for cover 40 mm thick ( 1:2:4 ) type b20 using 12.5 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75mm c / c both way with ms handle 20mm dia plastering 15mm thick cm ( 1:6 ) internally externally pgl funnel with ground wire mesh 20mm dia med grade gi pipe for watering complete all as shown on electrical plate no 3 of ssr part 1 2009 and connected in earth test incl testing completed all as specified. and directed. 167 m / l for hard core of guage not exc 63mm with broken stone deposited spread & levelled in layers n.exc 15cm thick, watered & ramed to a true surface. 168 m & l for point wiring complete with 1.5 sqmm single core pvc insulated frls cable 1100 volts grade with multi stranded copper conductor drawn through and including non metalic rigid pvc conduit medium grade isi marked and all conduit accessories concealed in wall / ceiling / fixed to roof / truss / columns etc and including provision of 1.5 sqmm pvc insulated copper cable frls as earth continuty, fabricated branded modular metal flush box / m s steel terminal boxes, concealed in walls with suitable modular inner and outer plate / 3 mm thick laminated top sheet cover for housing switches , socket out let and fan regulators etc , all as specified and as directed for the followings: complete all as specified and directed by engineer in charge. 169 one bell / buzzer point controlled by one bell push 170 one 3 pin 5 amps socket outlet point controlled by oneway switch on same board 171 one 3 pin 5 amps socket outlet point controlled by oneway switch on independent board. 172 all as per item no 170 above but point wiring with 4 sqmm single core copper cable and earth continuity wire with 2.5 sqmm single core stranded copper cable for one three pin 15 / 16 a socket outlet point on independent board complete all as specified and directed by engineer in charge. 173 supply and fix led batten luminaire surface mounted, 4 feet system wattage not less than 20 watts, > 2400 systems lumen outputwith lifetime of 50000 burning hours with 70% of its initial lumen maintained. cri>80, power factor > 0.95, thd< 10%, colour temperature 6500k, surge protection 2.5kv in cm, ip 20 protected, meets led is specifications, class 1, short circuit and over circuit protection, voltage range 150 to 270 volts ac, temperature range 0 to 50 degreec andincluding connecting up with pvc sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed completeallas specified and directed. 174 supply and fixing led bollard integral decorative with pmma diffuser 10 watt of height 0.6 meterwith ip 65 protection suitable for single phase 230 volts 50 hz ac supply including led bulb , poles, service wire conduit pipe and cement work complete all as specified and directed by engineer in charge. 175 supply and fixing new generation, post top energy saving environmently friendly 25w , long life aesthetically designed with symmetrical light distribuiton spun aluminium landscape luminaire with high power led as light sources. 176 m&l in replacement socket outlet6 amp flush button type complete all as specified and directed by engineer in charge. 177 s&f not less than 35w high efficient led street light fitting with pressure die cast aluminum housing and has lenses specially designed for street lighting with polycarbonate cover.system level efficacy of the luminarieshould more than 110lm / w. the color temperature is around 6500 k with a color rendering index of 70. the luminaire is ip:66 protected.it has an electronic driver complaint to iec safety standards with a power factor>.0.9, voltage variation range 120 270v, thd<10%, high and low protection along with a surge protection of 4 kv including provision ofsuitable dia gi light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed. 178 supply and fix wall mounted fan 400mm size, 230 volts , 50 hz 1420 rpm with 90 degree oscillation and having speed control by pull cord ( two ) system complete all as specified and directed. 179 s&fswitch modular type 6 amps 1 way, 1 module, 230v ac complete all as specified and directed by engineer in charge. 180 m&l for switch modular type 16 amps 1way, 1 module with modular plate light marking 230v ac complete all as specified and directed by engineer in charge. 181 m&l in replacement modular socket outlet 2 / 3 pin 6 / 16amp universal socket 2 module complete all as specified and directed by engineer in charge. 182 s&f modular socket outlet 2 / 3 pin 6 amp socket 2 module complete all as specified and directed by engineer in charge. 183 supply and fixing wall mounted angular electric chimney black colour of suction power not less than 1220cum / hr, al casette with stainless steel outer layer , touch control panel, 3 speedmotor with 250 watt with decorative smart cooker hood ss and glass , energy efficent led light with digital display , including ducting not less than 12 feet as per site required complete all as specified and as directed by engr in charge. 184 strato 2x2 ultra slim recess mounted edgelit led module with high brightness led package and unique pattern acrylic de glaring diffuser sheet for glare free uniform light distrubution suitable for armstrong / grid ceiling.pannel light 185 s & f water heater storage type ( geyser ) vertical type with suitable size of fastner and incl provision and connecting up of ss braided pipe with adopter for inlet and outlet water connection, having adjustable knob for temperature control and inner tankmaterial of superior glass lined tank and outer body material abs with high pressure with standing capacity upto 8 bar pressure completeall as specified of capacity 25 ltr having heating element 2 kw and not less than 5 star rating with minimum two year warrant on product.note : old unservicable geyser will be deposoted in mes yard. 186 s&f 15mm bore pillar tap of brass cp. 187 schedule of credit...

Due Date : November 15, 2023

Tender Value : ₹ 49 Lakhs

View Tender
10
Department of Higher Education - Delhi

40268070 bids are invited for split air conditioner including green ac ( v3 ) ( q2 ) , mirror polishing on marble work and granite work and stone work , 25 mm wooden planking, tongued and grooved in flooring, , 15 mm cement plaster brick wall with 1 isto 6 concentration , distempering with oil bound washable distemper , providing and applying white cement basedputty of average thickness 1mm , removing dry or oil bound distemper, water proofing cement paint , wall painting with premium acrylic emulsion paint of interior grade , repairs to plaster with cement mortar in 1 isto 4 ratio , providing and fixing 12 mm thick prelaminated particle board , providing and fixing aluminium die cast body tubular type universal hydraulic door closer , filling the gap in between aluminium frame and adjacent rcc or brick or stone , providing and fixing aluminium round shape handle of outer dia 100 mm , providing and fixing false ceiling at all heights , providing and fixing mineral fibre false ceiling tiles , providing and fixing of auditorium chairs made of bend ply frame , providing fixing woodan podium made of pressed ply board , providing fixing woodan dies made of pressed ply board , providing and fixing vip revolving chairs with lether fibric , provding and fixing of roller blinds , disposal of building rubbish, malba, similar unserviceable, dismantled or waste materials by mechanical means , wiring for light point and fan point and exhaust fan point and call bell point with 1.5 sq.mm frls pvc insulated copper , wiring for circuit 2 x 1.5 sq. mm plus 1 x 1.5 sq. mm earth wire , wiring for circuit 2 x 2.5 sq. mm plus 1 x 2.5 sq. mm earth wire , wiring for circuit 2 x 4 sq. mm plus 1 x 4 sq. mm earth wire , wiring for circuit 2 x 6 sq. mm plus 1 x 6 sq. mm earth wire , wiring for circuit 4 x 4 sq. mm plus 2x4 sq. mm earth wire , rewiring for light point or fan point or exhaust fan point or call bell point with 1.5 sq.mm frls pvc single core cable , supplying and fixing of 25mm pvc conduit along with accessories in surface , supplying and fixing 5by6 a switch on the existing modular plate , supplying and fixing 3 pin 5by6 a socket outlet on the existing modular plate , supplying and fixing 15by16 a switch on the existing modular plate , supplying and fixing 6 pin 15by16 a socket outlet on the existing modular plate , supplying and fixing stepped type regulator on the existing modular plate , supplying and fixing blanking plate on the existing modular plate , supplying and fixing 3 module gi box alongwith modular base and cover plate , supplying and fixing 6 module gi box alongwith modular base and cover plate , supplying and fixing 8 module gi box alongwith modular base and cover plate , supplying and fixing 12 module gi box alongwith modular base and cover plate , supplying and fixing 12 way double door, vertical type three pole and neutral, sheet steel, mcb distribution board, 415 v , supplying and fixing single pole 16 32 a mcb , supplying and fixing single pole 100 a mccb , supplying and fixing single pole 40 a tpn mcb , supplying and fixing single pole 32 a dp mcb , supplying and making end termination with brass compression gland and aluminium lugs for 3.5x50 sqmm , laying of one number pvc insulated and pvc sheathed cable of 1.1 kv grade of 35sqmm , supplying of one number pvc insulated and pvc sheathed of 3.5 x 50 sqmm , supplying, fixing, testing and commissioning of 40w industrial led batten , supplying, fixing, testing and commissioning of 21w surface mounted led downlighter , supplying, fixing, testing and commissioning of 15w by 16w round shape led downlighter , supplying, fixing, testing and commissioning of 70 watt flood light led comprising , supplying, fixing, testing and commissioning of ceiling 2x2 42 watt led environmental friendly , supplying and fixing of 34 watt led 4000 k , supplying and fixing 2 way double pole 25 to 32 amp mcb , supplying of 1400 rpm 300 mm size exhaust fan , supplying and fixing 3mm thick phenolic laminated sheet , supplying of dlp plastic trunking of 32mm x 20mm , providing and fixing of digital display board in auditorium building , providing and fixing of digital exit sign board , supplying of 4.0 ton tower air conditioning etc. as reqd. , installation of 4.0 ton tower air conditioning , supplying of one number pvc insulated and pvc sheathed of 3.5 x 35 sqmm , supplying of one number pvc insulated and pvc sheathed of 4 x 25 sqmm , supplying and fixing of 3x4 sqmm copper cable for exitring tower ac 4.0 ton etc. as reqd. , supplying and fixing of 3by8 and 6by8 copper pipe for exitring tower ac 4.0 ton etc. as reqd. , supply of 20 mm drain pipe for 4 ton ac , supplying and fixing of ms stand for exitring tower ac 4.0 ton total quantity : 14247...

Due Date : October 20, 2023

Tender Value : ₹ Ref. Documents

View Tender
11
Delhi Jal Board - Delhi

40192933 procurement of electrical items and renovation of electrification work with some allied works at rwph bawana. wiring for lightpoint / fanpoint / exhaust fan point / callbell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvcinsulated copper conductor single core cable etc. asrequired. group c 2 wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed steel conduit as required.2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire 3 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 4 2 x 4 sq. mm + 1 x 4 sq. mm earth wire 5 2 x 6 sq. mm + 1 x 6 sq. mm earth wire 6 supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5 / 6 amps switch 7 15 / 16 a switch 8 3 pin 5 / 6 a socket outlet 9 6 pin 15 / 16 a socket outlet 10 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 11 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 12 supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required.3 module ( 100mmx75mm ) 13 6 module ( 200mmx75mm ) 14 8 module ( 125mmx125mm ) 15 12 module ( 200mmx150mm ) 16 mccb with thermomagnetic release and terminalspreaders in existing cubicle panel board includingdrilling holes in cubicle panel, making connections, etc. as required.125 a, 36 ka, fpmccb 17 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 6 way , double door 18 6 way ( 4 + 18 ) , double door 19 supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 5a to 32a single pole and neutral 20 double pole 21 63 amp tpn 22 supplying and fixing 20 a, 240 v, spn industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 a c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 23 s / o 20 watt higher wattage decorative ultra slimpolycarbonate led lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack. 24 sitc of 1200 mm ac ceiling fan including connection with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable etc. as required. ( make:havells / cg / orient / usha / almonard& other reputed oem makes ) 25 supplying, installation, testing and commissioning of 450 mm sweep, 1400 rpm, single phase heavy duty exhaust fan in the existing opening, i / c connection etc as required. ( havells / cg / orient / usha / almonard& other reputed oem makes ) 26 supplying, installation, testing and commissioning of 600 mm sweep, single phase heavy duty air circulator in the existing opening, i / c connection etc as required. ( havells / cg / orient / usha / almonard& other reputed oem makes ) 27 fabrication of the ms structure as per the site requirement by the ms pole 28 fabrication of ms platform by the chuckered sheet as per the site requirement...

Due Date : October 20, 2023

Tender Value : ₹ Ref. Documents

View Tender
12
Department of Higher Education - Delhi

39873743 bids are invited for works split air conditioner including green ac (v3) (q2) , mirror polishing on marble work and granite work and stone work , 25 mm wooden planking, tongued and grooved in flooring, , 15 mm cement plaster brick wall with 1 isto 6 concentration , distempering with oil bound washable distemper , providing and applying white cement basedputty of average thickness 1mm , removing dry or oil bound distemper, water proofing cement paint , wall painting with premium acrylic emulsion paint of interior grade , repairs to plaster with cement mortar in 1 isto 4 ratio , providing and fixing 12 mm thick prelaminated particle board , providing and fixing aluminium die cast body tubular type universal hydraulic door closer , filling the gap in between aluminium frame and adjacent rcc or brick or stone , providing and fixing aluminium round shape handle of outer dia 100 mm , providing and fixing false ceiling at all heights , providing and fixing mineral fibre false ceiling tiles , providing and fixing of auditorium chairs made of bend ply frame , providing fixing woodan podium made of pressed ply board , providing fixing woodan dies made of pressed ply board , providing and fixing vip revolving chairs with lether fibric , provding and fixing of roller blinds , disposal of building rubbish, malba, similar unserviceable, dismantled or waste materials by mechanical means , wiring for light point and fan point and exhaust fan point and call bell point with 1.5 sq.mm frls pvc insulated copper , wiring for circuit 2 x 1.5 sq. mm plus 1 x 1.5 sq. mm earth wire , wiring for circuit 2 x 2.5 sq. mm plus 1 x 2.5 sq. mm earth wire , wiring for circuit 2 x 4 sq. mm plus 1 x 4 sq. mm earth wire , wiring for circuit 2 x 6 sq. mm plus 1 x 6 sq. mm earth wire , wiring for circuit 4 x 4 sq. mm plus 2x4 sq. mm earth wire , rewiring for light point or fan point or exhaust fan point or call bell point with 1.5 sq.mm frls pvc single core cable , supplying and fixing of 25mm pvc condu...

Due Date : October 07, 2023

Tender Value : ₹ Ref. Documents

View Tender
13
Delhi Development Authority - Delhi

39832676 construction of under ground reservoir ( ugr ) in block b, sector 26 at rohini phase iv.sh:sitc of clear water booster pump set and allied accessories at ugr sector 26 rohini ; 1 supply, installation, testing & commissioning of horizontal split casing centrifugal pump set with bronze impeller directly coupled through flexible coupling with tefc squirrel cage induction motor of suitable rating for operation on 415 volts, 3 phase, 50 hz ac supply, mounted on common m.s channel base frame complete with foundation bolts, nuts, washers, coupling guard, pressure gauge 100mm dia with copper tubing, brass stop cock, water drain pipe of suitable size and length, required size of g.i taper and anti vibration mounting pads, rcc foundation ( 1:2:4 ) etc. complete as per specifications attached. the pump shall be capable to perform the following duties: a ) discharge : 118.8 m³ / hourb ) head: 26 m c ) type of liquid :clear waterd ) r p m : 1450 2 supplying, installation, testing and commissioning of sewage submersibledrainage pump of 300 l / min discharge of water at 10 m head having solid handling capacity of 35mm complete with base plate and all accessoriessuitable for operation on 220 volts, single phase50hz., a.c. supply complete with starter for automatic operation i / c water level sensing device, inter connection, and submersible cable etc. complete as reqd. 3 supplying and installation of following size m.s black pipe including m.s flanges duly screwed and welded on both ends of pipe, bend, tee, nipple rubber gasket, g.i nuts, bolts and washers, support etc. complete as required.a. ) 150 mm dia ( heavy c class ) conforming to is:1239 part1 ( 2004 ) with upto date amendment. 4 supplying and installation of following size m.s black pipe including m.s flanges duly screwed and welded on both ends of pipe, bend, tee, nipple rubber gasket, g.i nuts, bolts and washers, support etc. complete as required. b. ) 100 mm dia ( heavy c class ) conforming to is:1239 part1 ( 2004 ) with upto date amendment. 5 supplying and installation of following size m.s black pipe including m.s flanges duly screwed and welded on both ends of pipe, bend, tee, nipple rubber gasket, g.i nuts, bolts and washers, support etc. complete as required. c. ) 50 mm dia ( medium b class ) conforming to is:1239 part 1 ( 2004 ) with upto date amendment. 6 supplying and fixing of cast iron double flanged sluice valve pn 16 conforming to is:14846, rising spindle type of following size: complete with nuts, bolts, washers, rubber insertions, necessary support, hand wheel including painting and testing etc completerequired as per technical specification attached. a. ) 100 mm dia 7 supplying and fixing of cast iron double flanged sluice valve pn 16 conforming to is:14846, rising spindle type of following size: complete with nuts, bolts, washers, rubber insertions, necessary support, hand wheel including painting and testing etc completerequired as per technical specification attached.b. ) 150 mm dia 8 supplying and fixing of cast iron double flanged non return valve pn 16 confirming to is: 5312 without by pass arrangement of following size complete with nuts, bolts, washers, rubber insertions necessary support, including painting and testing etc, as required. a. ) 100 mm dia 9 supplying and fixing of cast iron flanged foot valve confirming to is: 4038 of following size complete with nuts, bolts, washers, rubber insertions including painting and testing etc, as required. a. ) 200 mm dia 10 supply, installation, testing and commissioning of mild steel double flanged dismantling joints of pressure rating pn16 of the following sizes complete withginuts, bolts, washers, rubber insertions, painting & testing etc. as required.a. ) 100 mm dia 11 supply, installation, testing and commissioning of mild steel double flanged dismantling joints of pressure rating pn16 of the following sizes complete withginuts, bolts, washers, rubber insertions, painting & testing etc. as required.b. ) 150 mm dia 12 supplying and fixing of bronze globe valve of 50 mm dia in the existing pipe complete with rubber insertions, teflon tape accessories including painting and testing etc, as required. 13 sitc of floor mounted free standing type l.t. cubical main feeder pillar duly compartmentalized ( outdoor type ) made out of 2 mm thick ms crca sheet, 7 tank process powder coated, with 4 nos. x 600 mm long legs made of m.s angle iron of size 40 mm x 40 mm x 5 mm thick along with frame & legs suitably grouted in foundation i / c connection inter connection of the accessories mounted there on with suitable size of copper wire / strip with thimble / lugs, earthing the body of the feeder pillar suitable for operation on 415v, 3 phase, 50hz ac i / c supply & fixing of the following items and as per technical specification enclosed. a ) 250 a, 50ka, fpmccb ( ics= icu ) 1 no ( incomer ) b ) 63 amp tp mccb, 25 ka breaking capacity= 5 nos. ( 4 nos. for pump set+1 no. for iei ) outgoingc ) 32 amp dp mcb c series 4 no.d ) volt meter ( 0 500v ) 96 sq.mm with selector switch – 1 sete ) amp meter ( 0 100a ) 96sq.mm with selector switch & 100 / 5 amp ratio cts – 1 setf ) led type ryb phase indicating lamps, on, off, trip indicating lampsh ) 6 amp sp mcb – 1 no.i ) 3 phase 440 volts power shunt capacitor 7 kvar ( with 63 amps tp mcb ) including all accessory complete 4 setsj ) single phase preventerk ) star delta starter suitable for item no.1 load 4 set.l ) 400 amp, 4 strip sleeved aluminium busbar – 1 setm ) danger notice plate – 1 no.n ) 6 pin 15 a switch / socket outlet 1 seto ) lighting inside the feeder pillarfor all mccb ( ics= icu ) . outgoing mccb of motor shall be of motor grade.note: foundation height of 750 mm duly plastered & finishedhaving top outer edges 30 cm beyond all round the edges of 40x5 angle iron frame shall be made as per site requirementfor which nothing extra shall be paid. 14 supplyingof the following sizes of xlpe insulatedaluminium conductor armoured cable of 1.1 kv grade confirming to is: 7098 part 1 with upto date amendment. a. ) 3.5 c x95 mm² 15 supplyingof the following sizes of xlpe insulatedaluminium conductor unarmoured power cable of 1.1 kv grade confirming to is: 7098 part 1 with upto date amendment.a. ) 3 c x50 mm² 16 supplyingof the following sizes of xlpe insulatedaluminium conductor unarmoured power cable of 1.1 kv grade confirming to is: 7098 part 1 with upto date amendment. b. ) 4 c x16 mm² 17 supplyingof the following sizes of xlpe insulatedaluminium conductor unarmoured power cable of 1.1 kv grade confirming to is: 7098 part 1 with upto date amendment. c. ) 3 c x4 mm²flat cable 18 supplyingof the following sizes of xlpe insulatedaluminium conductor unarmoured power cable of 1.1 kv grade confirming to is: 7098 part 1 with upto date amendment. d. ) 3 c x4 mm² 19 supplying and installing following size of perforated pre painted m.s. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with m.s. suspenders including bolts & nuts, paintingsuspenders etc as required.a. ) 300 mm width x 50 mm depth x 1.6 mm thickness 20 supplying and installing following size of perforated pre painted m.s. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with m.s. suspenders including bolts & nuts, paintingsuspenders etc as required.b. ) 100 mm width x 50 mm depth x 1.6 mm thickness 21 supplying and installing following size of perforated painted with powder coating m.s. cable trays bends with perforation not more than 17.5%, , joined with connectors, suspended from the ceiling with m.s. suspenders including bolts & nuts, painting suspenders etc as required.a. ) 300 mm width x 50 mm depth x 1.6 mm thickness 22 wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group b 23 wiring for light / power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit alongwith 1 no. 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required. 24 supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.a. ) 6 pin 15 / 16 a socket outlet 25 wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed steel conduit as required. a. ) 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire 26 supplying and fixing of 90 watt led street light luminaire made up of pressure die cast aluminium alloy housing withip 66, ik07 protection, system efficacy>110 lm / w lumens, integral electronic driver with apfc, thd<10%, output short / open circuit protection, surge protection upto 10 kv ( with external spd ) phase to phase ( 440 v ) / over voltage protection & other safety test as per is 15885 part 2 / sec 13. cri>70, cct 5700 k suitable to operate on 240 v, 50 hz, a.c supply. installation on bracket of 1 mtr lengthmade of suitable dia gi pipe on surface / in recess with all required accessories including connections, testing etc. complete as required with minimum 5 years guarantee / warranty 27 supplying, installation, testing and commissioning of 24 watt prewired led batten with aluminium housing and integrated electronic driver efficiency>88%, inbuilt surge protection of 2.5 kv, cri>80, cct 6500 k, thd<20, lumen output > 100 lm / wattcomplete with all accessories directly on ceiling / wall suitable for operation on 230v, 50 hz ac supply including connection with 1.5 sq.mm frls pvc insulated copper conductor , single core cable and earthing etc. as required with minimum 2 years guarantee / warranty. 28 supply of celling fan of 1200 mm sweep sizes with minimum 226 m3 / hr. air delivery operating on single phase 50 hz, 230v, ac supply, complete etc. as required. 29 supplying and fixing extra conduit down rod of 20 cm length g.i. pipe 15 mm dia, heavy gauge including painting etc. as required. ( note : more than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored ) 30 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 31 supply of exhaust fan operating on single phase50 hz230 volt ac supply of 300 mm sweep size min 1600 m3 / hr. air delivery at rated speed 1380 rpm in metal body, bird guard to protect the fan in running condition, guarantee / warranty of 2 years with complete kit & required accessories for installation etc as required 32 installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. up to 450 mm sweep. 33 extra for fixing the louvers / shutters complete with frame for exhaust fan of all sizes 34 numbering of ceiling fan / exhaust fan / fluorescent fittings / led fitting / led street light fitting etc as required. 35 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) . a. ) 12 way , double door 36 supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. a. ) single pole 37 supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.b. ) double pole 38 earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. 39 supplying and laying 25 mm x 5 mm g.i strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with g.i. nut, bolt, spring, washer etc. as required. ( jointing shall be done by overlapping and with 2 sets of g.i. nut bolt & spring washer spaced at 50mm ) 40 providing and fixing 25 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required. 41 providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required. 42 supplying and replacement of insulation mat for electric purpose confirming to is 15652 / 2006, duly isi marked with anti skid abrasion size 1 mtr.x 2 mtr., b class, thickness 2.5 mm for 11 kv working voltage. 43 sitc of is: 15683 marked powder stored pressure type portable fire extinguisher with is: 14609 marked abc powder ( m.a.p 90% ) capacity 6 kg complete with squeeze grip release valve discharge pipe locking arrangement pressure gauge operation manual bracket with two screws & sleeves etc. complete as required 44 sitc of co2 ( carbon dioxide ) fire extinguisher isi marked confirming to is: 15683. capacity 4.5 kg complete with delivery hose horn, locking arrangement, operation manual, bracket with two screw and sleeve etc. complete as reqd....

Due Date : October 03, 2023

Tender Value : ₹ 25.50 Lakhs

View Tender
14
Municipal Corporation Of Delhi - Delhi

39721275 tender for rewiring, wiring work & etc. in rbipmt hospital. rewiring, wiring & mainer work at various block & etc. in rbipmt hospital.; 1 122.2.39:s / i / t / c of led tube type luminaire 20 watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient leds with the following: ( a ) total system wattage 20 watt + / 5% ( b ) luminous efficacy lumens / watt >=95 ( c ) power factor >=0.95 2 122.2.126:sitc of wall mounted fan 400mm sweep rated voltage 220 230 ac rated frequency 50hz speed 1280 1350 rpm with desired color 3 122.2.37:s / i / t / c of recess mounting crca housing 36w led luminaire with acrylic cover diffuser with following specifications including fixing on existing wall / surface with connections as reqd. ( a ) total system wattage = 36 watt + / 5% ( b ) luminus efficacy >=95 lumens / watt. ( c ) power factor >=0.95 4 122.2.38:s / i / t / c of surface mounting crca housing 36w led luminaire with acrylic cover diffuser with following specifications including fixing on existing wall / recess with connections as reqd. ( a ) total system wattage = 36 watt + / 5% ( b ) luminous efficacy >=95 lumens / watt. ( c ) power factor >=0.95 5 od9286 / 2023 2024:supplying and fixing dp sheet steel enclosure on surface / recess along with 25 / 32amps 240 volts c curve dp mcb complete with connections, testing and commissioning etc. as required. 6 od9287 / 2023 2024:supplying and fixing following rating, four pole, ( three phase and neutral ) , 415 volts, residual current circuit breaker ( rccb ) , having a sensitivity current upto 300 milliamperes in the existing mcb db complete with connections, testing and commissioning etc. as required.63 amps 7 od9288 / 2023 2024:supplying and fixing following rating, double pole, ( single phase and neutral ) , 240 volts, residual current circuit breaker ( rccb ) , having a sensitivity current upto 300 milliamperes in the existing mcb db complete with connections, testing and commissioning etc. as required.63 amps 8 od9289 / 2023 2024:supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.single pole 9 od9290 / 2023 2024:supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 6 way ( 4 + 18 ) , double door 10 od9291 / 2023 2024:supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 4 way ( 4 + 12 ) , double door 11 od9292 / 2023 2024:supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcbirccb / isolator12 way, double door 12 od9293 / 2023 2024:supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcbirccb / isolator8 way, double door 13 od9294 / 2023 2024:supplying and fixing pvc batten / angle holder including connection etc. as required. 14 od9295 / 2023 2024:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required.3 x 4 sq. mm 15 od9296 / 2023 2024:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required.3 x 2.5 sq. mm 16 od9297 / 2023 2024:rewiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface / recessed steel / pvc conduit including dismantling as required.group c 17 od9298 / 2023 2024:wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required2 x 10 sq. mm + 1 x 6 sq. mm earth wire 18 od9299 / 2023 2024:wiring for circuit / sub main wiring alongwith earth wirewith the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed steel conduit as required2 x 6 sq. mm + 1 x 6 sq. mm earth wire 19 od9300 / 2023 2024:wiring for circuit / sub main wiring alongwith earth wirewith the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed steel conduit as required2x2.5 sq.mm+1x2.5 sq.mm earth wire 20 od9301 / 2023 2024:wiring for light / power plug with 2x4 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit along with 1 no 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required 21 od9314 / 2023 2024:installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length ( up to 30 cm ) with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required 22 od9315 / 2023 2024:supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5 / 6 & 15 / 16 amps modular socket outlet and 15 / 16 amps modular switch, connection etc. as required. 23 od9316 / 2023 2024:supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5 / 6 amps modular socket outlet and 5 / 6 amps modular switch, connection etc. as required. ( for light plugs to be used in non residential buildings ) . 24 od9317 / 2023 2024:wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc as required.group c 25 od9318 / 2023 2024:wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required2 x 16 sq. mm + 1 x 6 sq. mm earth wire 26 od9332 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15 / 16 amp socket outlet 27 od9333 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5 / 6 amp socket outlet 28 od9334 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15 / 16 amp switch 29 od9335 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5 / 6 amps switch 30 od9336 / 2023 2024:installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.upto 450 mm sweep 31 od9337 / 2023 2024:installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. 32 od9338 / 2023 2024:supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc as required.12 module ( 200mmx150mm ) 33 od9339 / 2023 2024:supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc as required.8 module ( 125mmx125mm ) 34 od9340 / 2023 2024:supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc as required.6 module ( 200mmx75mm ) 35 od9341 / 2023 2024:supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc as required.4 module ( 125mmx75mm ) 36 od9342 / 2023 2024:supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 37 od9343 / 2023 2024:supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 38 od9344 / 2023 2024:supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm 39 od9345 / 2023 2024:supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm...

Due Date : September 25, 2023

Tender Value : ₹ 4.75 Lakhs

View Tender
15
Municipal Corporation Of Delhi - Delhi

39701903 tender for power backup system in deans office electrical work ; 2 122.1.5:supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is 7098 of following size: 2c*25 sqmm 3 122.2.77:sitc of on line ups with inbuilt isolation transformer suitable for single phase ac input and single phase ac output, floor mounted type, indicative power backup time of 60 mins through smf batteries. 3kva 4 122.2.37:s / i / t / c of recess mounting crca housing 36w led luminaire with acrylic cover diffuser with following specifications including fixing on existing wall / surface with connections as reqd. ( a ) total system wattage = 36 watt + / 5% ( b ) luminus efficacy >=95 lumens / watt. ( c ) power factor >=0.95 5 dsr 2022 6 od8524 / 2023 2024:laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. ( a ) upto 35 sq. mm ( clamped with 1mm thick saddle ) 7 od8525 / 2023 2024:supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as requireda.single pole 8 od8526 / 2023 2024:supplying and fixing following rating, double pole, 240 v, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required. 40 a 9 od8527 / 2023 2024:supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) a. 16 way, double door 10 od8528 / 2023 2024:wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required a.2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire...

Due Date : September 25, 2023

Tender Value : ₹ 2.08 Lakhs

View Tender
16
Municipal Corporation Of Delhi - Delhi

39701867 tender for improvement of ei and fans in puhc vivekanand puri polyclinic under cspz. ; 1 improvement of ei and fans in puhc vivekanand puri polyclinic under cspz. 2 od4877 / 2023 2024: rewiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm frls pvc insulated copper conductor single core cable as earth wire in existing surface / recessed steel / pvc conduit including dismantling as required group c ( 1.15.3 ) 3 od4878 / 2023 2024:wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with piano type switch, phenolic laminated sheet, suitable size ms box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required group c. ( 1.8.3 ) 4 od4879 / 2023 2024: supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required. ( 1.17.12 ) ( a ) 3x 2.5 sqmm 5 od4880 / 2023 2024: supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required. ( b ) 3x 6 sqmm ( 1.17.30 ) 6 od4881 / 2023 2024: supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required. ( c ) 3x 4 sqmm ( 1.17.21 ) 7 od4882 / 2023 2024:supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required 25 mm ( 1.21.2 ) 8 od4883 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ( a ) 5 / 6 amp switch ( 1.24.1 ) 9 od4884 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ( b ) 3 pin 5 / 6 amp socket outlet ( 1.24.4 ) 10 od4885 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ( e ) bell push ( 1.24.8 ) 11 od4886 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ( d ) 6 pin 15 / 16 amp socket outlet ( 1.24.5 ) 12 od4887 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ( c ) 15 / 16 amp switch ( 1.24.3 ) 13 od4888 / 2023 2024:supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, ?c? curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.single pole ( 2.10.1 ) 14 od4889 / 2023 2024:supplying and fixing following rating, double pole, 240 v, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required.63 a ( 2.12.2 ) 15 od4890 / 2023 2024:supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required. ( a ) 8 module ( 125 mmx125 mm ) ( 1.27.5 ) 16 od4891 / 2023 2024:supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required. ( b ) 12 module ( 200 mmx150 mm ) ( 1.27.6 ) 17 od4892 / 2023 2024: supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5 / 6 a & 15 / 16 a modular socket outlet and 15 / 16 a modular switch, connections etc. as required ( 1.32 ) 18 od4893 / 2023 2024:supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 12 way double door ( 2.3.3 ) 19 121.1:supply, installation, testing and commissioning of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current ( bldc ) motor, class of insulation: b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value ( cmm / w ) minimum 6.85, air delivery minimum 215 cmm, 350 rpm ( tolerance as per is : 374 2019 ) , thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c ( max. ) , insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. 20 od5341 / 2023 2024:p / f abc ( aluminium phosphate ) power type fire extinguisher of 6 kgs capacity complete in all respect with isi mark i / c fixing arrangement etc complete as reqd. 21 od5343 / 2023 2024:sitc of single phase monoblock pump set complete with all accessories workable on 240 / 415 volt 50 hz ac supply ( a ) 1 hp ( 0.75kw ) single phase pump set head from 12 30 metre suction and delivery 25*25 mm 22 od5344 / 2023 2024:laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open as required.upto 35 sqmm 23 od5345 / 2023 2024:laying of one no pvc insulated and pvc sheathed / xple al conductor armoured power cable of 1.1kv grade of following sizeon wall surface as required. up to 35 sq, mm ( clamped with 1mm thick saddle ) 24 od5347 / 2023 2024:installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.upto 450mm sweep ( 1.50.1 ) 25 od5348 / 2023 2024:supply of 15 ( 380mm ) sweep 1400 rpm exhaust fan heavy duty complete with shutter, blade etc as reqd. 26 od5349 / 2023 2024:earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal / coke and salt as required ( 5.4 ) 27 od5350 / 2023 2024:supplying and laying 25 mm x 5 mm g.i strip at 0.50 meter below ground as strip earth electrode, including connection / terminating with g.i. nut, bolt, spring, washer etc. as required. ( jointing shall be done by overlapping and with 2 sets of g.i. nut bolt & spring washer spaced at 50 mm ( 5.9 ) 28 od5351 / 2023 2024: providing and fixing 25 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required ( 5.15 ) 29 od5352 / 2023 2024:providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. ( a ) 100amp 16ka tpmccb ( 2.2.1 ) 30 od5354 / 2023 2024:providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. ( b ) 125 amp 16 ka tpmccb ( 2.2.2 ) 31 improvement of ei and fans in puhc vivekanand puri polyclinic under cspz. 32 122.2.190:supply and fixing of 32mm dia x 1 meter long g.i. pipe ( medium class ) bracket for mounting of fluorescent / hpmv / hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd. 33 122.1.3:supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is 7098 of following size: 2c*10 sqmm 34 122.2.33:sitc of 60w led street light luminaire fitted with lens, top opening driver cover made of pressure die cast aluminium housing & toughened glass cover complete with the following specification as reqd with ip 66 protection ( a ) total system wattage =60 watt + / 5% ( b ) luminaire efficacy>=100 lm / w ( c ) power factor>=0.95 ( d ) protection class ip 66 35 122.2.39:s / i / t / c of led tube type luminaire 20 watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient leds with the following: ( a ) total system wattage 20 watt + / 5% ( b ) luminous efficacy lumens / watt >=95 ( c ) power factor >=0.95 36 122.2.83:supply, installation, testing and commissioning of power distribution board made out of 1.6 mm sheet steel, epoxypowder coated , specially designed al bus bar 400a to 630a with heat shrinkcable colour coated sleeves suitable for accommodating mccbs / mcbs / isolators as incoming and outgoing as required ( without mccbs / mcbs / isolators ) complete with digital meter module, including voltmeter ammeter with selector switch, cts control fuse and indicating lights including connections etc. as required ( conforms to is:8623 ) 37 122.2.84:supplying and fixing of full stainless steel body self contained drinking water cooler with cooling capacity 150ltr per hr, storage capacity 150ltr and suitable for 230v supply as required. 38 122.2.131:supply, installation, testing and commissioning of 1.5 ton, 5 star rated inverter split air conditioner with rotary compressor ( r32 refrigerant ) having copper condenser complete with outdoor unit as required. 39 122.2.115:s / i / t / c of 4 kva voltage stabilizer having input voltage 150v 270v and output voltage 195 245v 40 122.2.111:supply and fixing of 4.5 kg dcp with co2 gas cartridge fire extinguisher ( conforming to is:2171 with cylinder fully charged ) 41 122.2.77:sitc of on line ups with inbuilt isolation transformer suitable for single phase ac input and single phase ac output, floor mounted type, indicative power backup time of 60 mins through smf batteries. 3kva 42 122.2.125:sitc of 40ah 12 volt lead acid battery with rack etc. as requrired with four years comprehensive maintenance after one year defect laibility period and battery cost in 3rd year....

Due Date : September 25, 2023

Tender Value : ₹ 20.37 Lakhs

View Tender
17
Delhi Jal Board - Delhi

39657979 renovation of electrification system of various bps in r.k.puram ac 44 , name of bps 1 vasant vihar bps. 2 anand nikitan bps. 3 westend bps. 4 shanti nikitan bps. ] wiring for light point / fan point / exhaust fan point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit with piano type switch, phenolic laminated sheet, suitable size m s.box&earthing the point with 1.5 sq. mm. fr pvc insulated copper conductor single core cable etc as reqd. group – c.1.8.3 , wiring for circuit / sub main wiring along with earth wire with the following. sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required. 2 x 2.5 sq. mm. + 1 x 2.5 sq. mm. earth wire.1.14.2 , wiring for light / power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit alongwith 1 no 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required.1.12 , supplying and fixing following way, horizontal type three pole and neutral, sheet steel mcb distribution board, 415 v, on surface / recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) . 4 way ( 4 + 12 ) doule door.2.4.1 , supplying & fixing 5 amp. to 32 amp. rating 240 / 415 v, volt miniature circuit breaker suitable for lighting and other loads of following poles in the existingmcb db complete with connections, testing and commissioning etc. as required, single pole. 2.10.1 , supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box / wooden block including connection etc as required1.33 , supply of powder coated regal batten type luminaries with led type of capacity 22 w, 1×22 w ftl hf type make havells / crompton / polycab , supply of 1200 mm. sweep ceiling fans. make : ( orient / havells / crompton ) . , supply of 450 mm. exhaustfans . make : ( orient / havells / crompton ) . , supply of 450 mm. air circulators fans. make : ( bajaj / havells / crompton ) . , supply of 2 x 10 sq. mm. aluminium conductor power armoured cable. polycab / grandlay / national. , supply of 70wled flood light ( polycab, crompton, havells ) , installation, testing and commissioning of pre wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling / wall, including connection with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable and earthing etc. as required.1.41 , installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. also for fixing the louvers / shutters complete with frame for a exhaust fan of all sizes.1.50.1 & 1.51...

Due Date : September 20, 2023

Tender Value : ₹ Ref. Documents

View Tender
18
Delhi University - Delhi

39480216 replacement of defective existing fitting with led 18 watts pll and provision of power points and other allied work to be carried out in room no. 2, 3, 11, 12, 13, 17, 26, 33, 22, 21, 301, 302, 306 and lab no. 26, 22, 17, 306, 310, 311, 312, 313 in department of botany and seminar hall and rooms of conference centre, university of delhi ; 1 s / f the following size / modules g.i box along with modular base and cover plate for modular switches in recess etc as reqd. 2 6 module 3 8 module 4 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required. 5 1 x 1.5 sq.mm 6 2 x 2.5 sq.mm 7 2 x 4 sq.mm 8 2 x 6 sq.mm 9 wiring for circuit / submain wiring longwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required 4 x 16 sq. mm + 2 x 16 sq. mm earth wire 10 supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 11 5 / 6 amps switch 12 3 pin 5 / 6 amps socket outlet 13 15 / 16 amps switch 14 6 pin 15 / 16 amps socket outlet 15 wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc as required.group c 16 rewiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface / recessed steel / pvc conduit including dismantling as required.group c 17 supplying and fixing 5 amps to 32 amps rating, 240 / 415 volts, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.single pole 18 supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 3½ x 120 sq. mm 19 providing and fixing following rating and breaking capacity and pole mccb in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 200 a, 35 ka tpmccb 20 supplying and fixing of 18 watts led 4 pin pll 1700 lumens tube dimension 1200x32x26 with colour 6500 in the existing fitting including making connection etc. as required at site. ( philips ) 21 finding and detecting location of underground lt cable with flc machine including excavation, pin pointing, fault , refilling after repair of ground at marked fault as required at site. 22 making provision of digging out the fault location upto 10 mtr for making connection straight through joint by tracing out the loop and then refilling the trench after restoring the electric supply etc. as required. 23 supplying, fixing and laying of one number pvc insulated and pvc sheathed / xlpe aluminium armoured conductor power cable confirming to 1.1 kv grade of following size direct in ground including excavation sand cushioning , protective covering , refilling the same etc. as required. 3½ x 185 sq. mm 24 supplying and fixing following rating, tpn mcb 415v in the existing mcb db complete with connection, testing and commissioning etc. as required. 25 servicing / cleaning / meggering / checking of load balancing / checing with ton tester of existing panel i / c removing the dust and carbonized and dress up the hanging wire along with thimble if necessary etcas required at site. 26 s / f of single box type fitting complete with all accessories i / c making connection etc. as required. tmc 502 1xt led 22w p3242 i / c having 1 nos. of stellar bright 20watts led tubelight in the existing fitting as required. 27 supplying and fixing of 48 ceiling fan including 3 fan rod and making connection etc. as required at site. ( crompton / havells ) ...

Due Date : September 18, 2023

Tender Value : ₹ 7.19 Lakhs

View Tender
19
Municipal Corporation Of Delhi - Delhi

39215649 provision of fire exit signage & refilling of fire fighting extinguishers in glm hospital electrical work ; 2 od7016 / 2023 2024:wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required group c 3 od7018 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5 / 6 amp socket outlet 4 od7019 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ( c ) 15 / 16 amp switch 5 od7020 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ( a ) 5 / 6 amp switch 6 od7022 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15 / 16 amp socket outlet 7 od7023 / 2023 2024:wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessedpvc conduit as required.2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 8 od7024 / 2023 2024:wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessedpvc conduit as required.2 x 4 sq. mm + 1 x 4 sq. mm earth wire 9 od7026 / 2023 2024:supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required ( a ) single pole 10 od7030 / 2023 2024:supplying and fixing following rating, double pole, 240 v, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required.63 a 11 od7037 / 2023 2024:supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required. 12 module ( 200 mmx150 mm ) 12 od7038 / 2023 2024: supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5 / 6 a & 15 / 16 a modular socket outlet and 15 / 16 a modular switch, connections etc. as required 13 od7039 / 2023 2024:supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 12 way double door 14 od7040 / 2023 2024:earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal / coke and salt ) as required. 15 od7041 / 2023 2024:providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as reqd. 16 121.1:supply, installation, testing and commissioning of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current ( bldc ) motor, class of insulation: b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value ( cmm / w ) minimum 6.85, air delivery minimum 215 cmm, 350 rpm ( tolerance as per is : 374 2019 ) , thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c ( max. ) , insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. 17 od7065 / 2023 2024:laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required ( a ) upto 35 sq. mm 18 od7066 / 2023 2024:laying of one no pvc insulated and pvc sheathed / xple al conductor armoured power cable of 1.1kv grade of following sizeon wall surface as required. up to 35 sq, mm ( clamped with 1mm thick saddle ) 19 od7074 / 2023 2024:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required.3 x 2.5 sq. mm 20 approved item 21 122.2.131:supply, installation, testing and commissioning of 1.5 ton, 5 star rated inverter split air conditioner with rotary compressor ( r32 refrigerant ) having copper condenser complete with outdoor unit as required. 22 122.2.117:s / i / t / c of copper pipe for split ac 23 122.2.115:s / i / t / c of 4 kva voltage stabilizer having input voltage 150v 270v and output voltage 195 245v 24 122.1.3:supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is 7098 of following size: 2c*10 sqmm 25 122.2.39:s / i / t / c of led tube type luminaire 20 watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient leds with the following: ( a ) total system wattage 20 watt + / 5% ( b ) luminous efficacy lumens / watt >=95 ( c ) power factor >=0.95 26 122.2.33:sitc of 60w led street light luminaire fitted with lens, top opening driver cover made of pressure die cast aluminium housing & toughened glass cover complete with the following specification as reqd with ip 66 protection ( a ) total system wattage =60 watt + / 5% ( b ) luminaire efficacy>=100 lm / w ( c ) power factor>=0.95 ( d ) protection class ip 66 27 122.2.190:supply and fixing of 32mm dia x 1 meter long g.i. pipe ( medium class ) bracket for mounting of fluorescent / hpmv / hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd. 28 122.2.2: p / fhot press sheet mouldedcompound ( smc ) fire retardant ( temp. resistance up to 200 c ) , ip 55 weather proof polebox of innerdimension 200x160x98mm ( ns ) complete with suitable arrangement for fixing of 2 nosof 6 to 32 amp single pole mcb & 63 amp. doublepole isolator ( mcb / isolator excluded ) withneutral link duly shorting on din channel with2 nos of ms clamps with ss back plateofsuitable size with danger monogram property printed on the coveretc asreqd. asreqd. 29 122.1.35:supply of xlpe insulated pvc sheathed al. conductor un armoured cable 1.1kv grade conforming to is 7098 of following size: 2c*4 sqmm 30 122.2.114:s / i / t / c of stand for split ac 31 122.1.54:supply of extra drain pipe 32 122.2.119:s / i / t / c of 3 core, 4 sqmm. electrical wire for air conditioner...

Due Date : August 28, 2023

Tender Value : ₹ 2.12 Lakhs

View Tender
20
Delhi Development Authority - Delhi

38953037 tender for renovation of various public building works located at village qutabgarh.sh:iei works. ; 1 wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. a ) group c 2 wiring for light / power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit along with 1 no. 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required. 3 wiring for light / power plug with 4x4 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit along with 2 nos. 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required. 4 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5 / 6 & 15 / 16 a modular socket outlet and 15 / 16 a modular switch, connections etc. as required. 5 wiring for circuit / sub main wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed steel conduit as required. a ) 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire 6 wiring for circuit / sub main wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed steel conduit as required.b ) 2 x 6 sq. mm + 1 x 6 sq. mm earth wire 7 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required. 3 x 1.5 sq. mm 8 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 12 way , double door 9 supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.a ) single pole 10 supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. b ) double pole 11 earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal / coke and salt as required. 12 providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / sub main wiring / cable as required. 13 supply of following wattage 6500 k led battenwith rated input voltage 140 270 v ac supply, in built surge protection of 2.5 kv, cri>80, driver efficiency >85%, thd <20% efficacy not less than 100 lumen / watt i / c all required accessories as completea ) 40 watt made of aluminium body 14 supply of following wattage 6500 k led battenwith rated input voltage 140 270 v ac supply, in built surge protection of 2.5 kv, cri>80, driver efficiency >85%, thd <20% efficacy not less than 100 lumen / watt i / c all required accessories as complete b ) 9 / 10 watt made of aluminium / polycarbonate body 15 installation , testing, commissioning of wall bracket / ceiling fittings of all sizes and shapes containing upto two gls / cfl / led lamps per fitting, complete with all accessories including connections etc. as required. 16 supply ofenergy efficient metallic body exhaust fan of 300 mm sweep with minimum air delivery of 900 cubic meter per hour at rated rpm to operate on single phase 230 volt, 50 hz ac supply with 3nos. aerodynamically designed & balanced blade / impeller, copper windingwith bird guard to protect the fan in running condition, arm set, frame and all required accessories 17 installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. upto 450 mm sweep 18 supply, installation, testing and commissioning of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current ( bldc ) motor, class of insulation: b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value ( cm / m / w ) minimum 6.00, air delivery minimum 210 cum / min , 350 rpm ( tolerance as per is : 374 2019 ) , thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c ( max. ) , insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. 19 sitc of 1 hp monoblock centrifugal clear water pump ( 25 x25 mm ) fitted with motor suitable to operate on 230 v 50 hz ac supply, the minimum discharge shall be 50 ltr. / min. at 6 mtr. head, f class copper winding, carbon steel pump shaft, cast iron impeller, high quality mechanical seal, high grade pump castings ( fg 200or equivalent grade ) i / c complete as required. 20 sitc of g.i. pipes 25 mm dia suitable for clear water supply i / c all required accessories e.g. bend, coupler, joints etc. as required for complete installation. 21 supply and fixing of 80 wattenergy efficient led flood light die cast aluminium housing with 10 kv spd, lens & toughened glass, ip 66 protection, integrated electronic driver with rated input voltage 140 270 v ac supply, lumen outputnot less than 8800 lm, system efficacy not less than 110 lumen / watt color temperature ( cct ) 5700k 6500 k, cri>70, thermal shock and impact resistance ik 07 with minimum 5 years guarantee / warrantyi / c all required accessories, making connection, testing etc complete as required....

Due Date : August 10, 2023

Tender Value : ₹ 7.16 Lakhs

View Tender
21
Municipal Corporation Of Delhi - Delhi

38933149 tender for provision of electrical installations in newly constructed s. k. shelter at m pkt dhalao, phool wali gali, dilshad garden in ward no. 217, under shahdara ( north ) zone. 2 od5232 / 2023 2024:supply, installation, testing and commissioning of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current ( bldc ) motor, class of insulation: b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value ( cmm / w ) minimum 6.85, air delivery minimum 215 cmm, 350 rpm ( tolerance as per is : 374 2019 ) , thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c ( max. ) , insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. 3 od5233 / 2023 2024:supplying and fixing 20 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 4 od5234 / 2023 2024:supplying and fixing 5 amps to 32 amps rating, 240 / 415 volts, 10 ka c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with supplying and fixing brass batten / angle holder including connection etc. as required. ( single pole ) 5 od5235 / 2023 2024:supplying and fixing extra conduit down rod of 20 cm length g.i. pipe 15 mm dia, heavy gauge including painting etc. as required. ( note : more than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored ) 6 od5236 / 2023 2024:supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5 / 6 & 15 / 16 a modular socket outlet and 15 / 16 a modular switch, connections etc. as required. 7 od5237 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required ( a ) 3 pin 5 / 6 amp socket outlet 8 od5238 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required ( a ) 5 / 6 amps switch 9 od5239 / 2023 2024:wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required. a. 2x 6 sq.mm + 1x 6 sq.mm earth wire 10 od5240 / 2023 2024:wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required. a. 2x4 sq.mm + 1x4 sq.mm earth wire 11 od5241 / 2023 2024:wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required. a. 2x2.5 sq.mm + 1x2.5 sq.mm earth wire 12 od5242 / 2023 2024:providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required. 13 od5243 / 2023 2024:providing and laying earth connection from earth electrode with 6 swg dia g.i. wire in 15 mm dia g.i. pipe from earth electrode including connection with g.i. thimble excavation and re filling as required. 14 od5244 / 2023 2024:earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal / coke and salt ) as required 15 od5245 / 2023 2024:wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. 16 122.1.2:supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is 7098 of following size: 2c*6 sqmm 17 122.1.47:supply of 250 mm ( 10 inch ) sweep 1250 rpm exhaust fan fresh air type complete with shutter blades etc. as required. 18 122.2.2: p / fhot press sheet mouldedcompound ( smc ) fire retardant ( temp. resistance up to 200 c ) , ip 55 weather proof polebox of innerdimension 200x160x98mm ( ns ) complete with suitable arrangement for fixing of 2 nosof 6 to 32 amp single pole mcb & 63 amp. doublepole isolator ( mcb / isolator excluded ) withneutral link duly shorting on din channel with2 nos of ms clamps with ss back plateofsuitable size with danger monogram property printed on the coveretc asreqd. asreqd. 19 122.2.27:sitc of 30w led flood light luminaire fitted with lens, made of pressure die cast aluminium housing & toughened glass cover complete with the following specification as reqd with ip 66 protection ( a ) total system wattage =30 watt + / 5% ( b ) luminaire efficacy>=100 lm / w ( c ) power factor>=0.95 ( d ) protection class ip 66 20 122.2.39:s / i / t / c of led tube type luminaire 20 watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient leds with the following: ( a ) total system wattage 20 watt + / 5% ( b ) luminous efficacy lumens / watt >=95 ( c ) power factor >=0.95 21 od5272 / 2023 2024:laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. upto 35 sq. mm ( clamped with 1mm thick saddle ) ms flat clamp ) 22 ar items 23 2.3.2:supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcbirccb / isolator8 way, double door 24 2.12.2:supplying and fixing following rating, double pole, 240 volts, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required.63 amps 25 2.14.1:supplying and fixing following rating, double pole, ( single phase and neutral ) , 240 volts, residual current circuit breaker ( rccb ) , having a sensitivity current upto 300 milliamperes in the existing mcb db complete with connections, testing and commissioning etc. as required.25 amps...

Due Date : August 08, 2023

Tender Value : ₹ 74870.0

View Tender
22
Ministry Of Urban Development - Delhi

38828730 bids are invited for1 title1 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. (dsr 2022 p no. 02) (a) group c 2 title2 wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required. (dsr 2022 p no. 03) (a) 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire 3 title3 wiring for light/ power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit alongwith 1 no. 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required. (dsr 2022 p no. 03) 4 title4 laying and fixing of one number pvc insulated an pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. (dsr 2022 p no. 27 )(a) upto 35 sq. mm (clamed with 1 mm thick saddle.) 5 title5 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer ) as required . (notevertical type mcb tpdb is normally used where 3 phase outlets are required.) (dsr 2022 p no. 11)(a) 8 way (4+24) double door 6 title6 supplying and fixing 6 swg dia g i wire on surface or in recess for lop earthing along with existing surface / recessed conduit / submain wiring/ cable as required. (dsr 2022 p no.24) 7 title7 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.(dsr 2022 p no. 11)(a) single pole 8 title8 supply of following multicore alumunium conductor xlpe insulated armoured cable 1.1 kv grade confirming to is 7098 (part i) complete with all amendments etc. as required.(a) 2 x 6 sq mm 9 title9 supplying and fixing 3 pin, 5 a ceiling rose on the existing junction box/ wooden block including connections etc. as required. (dsr 2022 p no. 7 ) 10 title10 supplying and fixing 63a fp rating, 240/415 v, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 11 title11 supplying and fixing led downlighted surface mounting 22 watt made out of pdc al with high efficient leds & glare free opal diffuser ip 20 connection testing etc. as required. 12 title12 supplyingand fixing of ceiling fan 1200 mm sweep with double ball bearing high speed etc as required. 13 title13 supplyingand fixing of wall fan 450 mm sweep with double ball bearing high speed etc as required. 14 title14 supplyingand fixing of hd exhaust fan 300 mm sweep with double ball bearing 900 rpm etc as required. 15 title15 supplying and fixing led flood light 100 watt made out of pdc al housing with lens toughened glass and with efficacy 120im/w ip 66 connection testing etc. as required. total quantity : 804...

Due Date : August 04, 2023

Tender Value : ₹ Ref. Documents

View Tender
23
Municipal Corporation - Delhi

38801779 repair of wiring and p / o ei at maternity home badarpur near toll plaza mathura road ( dispensary ) . 1 od4089 / 2023 2024:wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size ms box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group c 2 od4090 / 2023 2024:rewiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm frls pvc insulated copper conductor single core cable as earth wire in existing surface / recessed steel / pvc conduit including dismantling as required.group c 3 od4091 / 2023 2024:wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required. ( b ) 2 x 6 sq. mm + 1 x 6 sq. mm earth wire 4 od4092 / 2023 2024:wiring for light / power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit alongwith 1 no. 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required. 5 od4093 / 2023 2024:wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required. ( a ) 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 6 od4094 / 2023 2024:supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required. ( a ) pin 5 / 6 a socket outlet 7 od4095 / 2023 2024:supplying and fixing following piano type switch / socket on theexisting switch box / cover including connections etc. as required. ( a ) 5 / 6 amps switch 8 od4096 / 2023 2024:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required. 3x6 sq. mm 9 od4097 / 2023 2024:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required.3 x 4 sq. mm 10 od4098 / 2023 2024:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required. 3x2.5 sq. mm 11 od4099 / 2023 2024:providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 400 a, 36ka, fpmccb 12 od4100 / 2023 2024:providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 a, 16 ka, tpmccb 13 od4101 / 2023 2024:installation of exhaust fan in the existing opening , including making good the damage , connection, testing, commissioning etc.as required. ( a ) up to 450 mm sweep 14 od4102 / 2023 2024:supplying and fixing metal box of 150mm x 75mm x 60mm deep ( nominal size ) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5 / 6 a socket outlet and 5 / 6 a piano type switch, connections, painting etc. as required. 15 od4103 / 2023 2024:supplying and fixing metal box of 180mm x 100mm x 60mm deep ( nominal size ) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5 / 6 & 15 / 16 a socket outlet and 15 / 16 a piano type switch, connections, painting etc. as required. 16 od4104 / 2023 2024:supplying and fixing cable end box ( loose wire box ) suitable for following single pole and neutral, sheet steel, mcb distribution board, 240 volts, on surface / recess, complete with testing and commissioning etc. as required. for 10 way, double door spn mcbdb 17 od4105 / 2023 2024:supplying and fixing cable end box ( loose wire box ) suitable for following single pole and neutral, sheet steel, mcb distribution board, 240 volts, on surface / recess, complete with testing and commissioning etc. as required.for 6 way, double door spn mcbdb 18 od4106 / 2023 2024:laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. upto 35 sq. mm ( clamped with 1mm thick saddle ) 19 od4107 / 2023 2024:p / f 6 swg dia gi wire on surface or in recess for loop earthing along with existing surface / recess conduit / submain wiring cable as reqd. 20 od4108 / 2023 2024:supplying and laying 25 mm x 5 mm g.i strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with g.i. nut, bolt, spring, washer etc. as required. ( jointing shall be done by overlapping and with 2 sets of g.i. nut bolt & spring washer spaced at 50mm ) 21 od4109 / 2023 2024:earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. 22 od4110 / 2023 2024:supplying and fixing 20 a, 240 v, spn industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 a c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 23 od4111 / 2023 2024:supplying and fixing following rating , double pole, 24o volt, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required. ( b ) 63 amps 24 od4112 / 2023 2024:supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. ( a ) single pole 25 od4113 / 2023 2024:laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. up to 35 sqmm 26 od4114 / 2023 2024:supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930, part ii complete with fitting and cutting, jointing etc.direct in ground ( 75 cm below ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.63 mm dia ( od 63 mm & id 51 mm nominal ) 27 122.1.47:supply of 250 mm ( 10 inch ) sweep 1250 rpm exhaust fan fresh air type complete with shutter blades etc. as required. 28 od4142 / 2023 2024:supply of 15 ( 380mm ) sweep 1400 rpm exhaust fan heavy duty complete with shutter, blade etc. as required. 29 od4143 / 2023 2024:supply of 1200 mm sweep 50 watt, energy saver isi marked bee 5 star rating ac ceiling fan suitable for 230 v, 50 hertz ac supply without regulator with blades, downrod etc. complete as required. 30 122.2.39:s / i / t / c of led tube type luminaire 20 watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient leds with the following: ( a ) total system wattage 20 watt + / 5% ( b ) luminous efficacy lumens / watt >=95 ( c ) power factor >=0.95 31 122.2.37:s / i / t / c of recess mounting crca housing 36w led luminaire with acrylic cover diffuser with following specifications including fixing on existing wall / surface with connections as reqd. ( a ) total system wattage = 36 watt + / 5% ( b ) luminus efficacy >=95 lumens / watt. ( c ) power factor >=0.95 32 122.1.3:supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is 7098 of following size: 2c*10 sqmm 33 122.1.39:supply of xlpe insulated pvc sheathed al. conductor un armoured cable 1.1kv grade conforming to is 7098 of following size: 2c*25 sqmm 34 122.1.30:supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is 7098 of following size: 4c*25 sqmm 35 122.1.32:supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is 7098 of following size: 4c*50 sqmm 36 122.2.7: fabrication, supply & erection of following size flange mounted hot dip galvanized octagonal pole made from ht steel plate, window with flash cover with full vertical window cover at appropriate height from the base plate on existing cement concrete pedestal as required. i / c supplying and fixing of 6 mm thick laminated mounted sheet inside the window mounted on and i / c providing and welding 3 nos. gi strips 4 mm thick of suitable length and having suitable size tapped holes as reqd, terminal block suitable for 25 sq mm conductor 4 nos. & shorting links on din channel i / cpdg and fixing din channel of suitable length, , 6 amp. spmcb c characteristics, earth stud, cable support clamp suitable for upto 4x25 sqmm cable. logo / name of manufacturer shall be embossed on the pole. galvanization as per relevant is.5.0 mtr height, 3 mm thick, bottom dia of 130mm & top dia of 70mm base plate of size 225 x 225 x 12 mm thick 37 122.2.10.a:providing and laying in position m25 grade reinforced cement concrete foundation of size 450 mm ( l ) ×450 mm wide and 1000 mm deep i / c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia 960 mm long ( approx ) 8 nos. and reinforcement of cold twisted bars of 8 mm dia 1400 mm ( approx ) 6 nos. ( with 150 mm spacing ) as required with supplying and positioning of 4 nos. foundation bolts16 mm dia, 600 mm long, j type i / c 2 nos. template anchor plates of size 225mm×225mm×3mm and providing dwc hdpe for cable entry and exit as required for 3 m and 5 mtr pole. 38 122.2.15:fabrication, supplying and fixing class b galvanised single overhang arm bracket made out of 250mm long galvanised top tube with cap and 250mm long 32 mm dia galvanised pipe with tightening bolts complete as required. 39 122.2.154b. ( c ) :supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i / c connection etc. as reqd. three phase 5.0 hp having discharge of 300 lpm approx. at 39 m head. 40 122.2.155. ( d ) :supply, installation, testing and commissioning of cubical type control panel board for single phase & three phasesubmersible pumping set of following rating complete with contactor, relay , mcb , condenser , voltmeter, ammeter and indication lamp etc includingconnections etc as reqd. 5 hp ( three phase ) 41 122.2.156. ( c ) :p&f following sizes of pvc insulated & pvc sheathed copper conductor 3 core submersible cable confirming to is.694 / 1990 etc. as reqd. 3x 6 sq.mm 42 122.2.150. ( c ) :supply, lowering and fixing following size of g.i. pipe ( m class ) i / c cutting threading on both sides etc. isi marked etcas reqd. 40mm ( nominal bore ) 43 122.2.160. ( a ) :s & f ms clamp made up of iron flat of size 50x6 mm with 4 nut bolt for holding the gi pipe pipe as reqd. 32 mm 44 122.2.158. ( a ) :supplying and fixing following sizes of insulated steel flexible safety rope for holding submersible pump set i / c clips etc complete as reqd. 6 mm 45 122.2.151. ( c ) :s & f following size of g.i. socket. as reqd. 40mm 46 122.2.4:sitcof pillar box size 900 mm x 450mm x 250mm suitable for mounting incomer of 250 a mccb / main switch 4 pole and energy meter 3 phase complete with eluotropic grade aluminium bus bar of size 25mm x 19 mm mounted on galvanized m. s. body power quoted pilferage proof smc door duly welded with s.s. withrain cover size 40mm x 40mm x 5mm x 600mm height in cutting 300 mm height below groundand covered with shode proof smc sheet of 3 mm as required. 47 122.2.143. ( c ) :comprehensive amc ( annual maintenance contract ) for repair andmaintenance of tube wells installed at various municipal parks for depth of 30 meters to 50 meters. cost for one tube wells with submersible p / set etc of upto 5 hp...

Due Date : July 31, 2023

Tender Value : ₹ 13.85 Lakhs

View Tender
24
Municipal Corporation - Delhi

38801770 repair of wiring and p / o ei at staff quarter maternity home, c block defence colony ( ipp viii ) . 1 od3515 / 2023 2024:wiring for light / power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit alongwith 1 no. 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required. 2 od3516 / 2023 2024:supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5 / 6 & 15 / 16 a modular socket outlet and 15 / 16 a modular switch, connections etc. as required. 3 od3517 / 2023 2024:supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5 / 6 a modular socket outlet and 5 / 6 a modular switch, connections etc. as required. 4 od3518 / 2023 2024:supplying and fixing 20 a, 240 v, spn industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 a c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 5 od3519 / 2023 2024:supplying and fixing following size / modules, gi box along with modular base & cover plate for modular switches in recess etc. as required. 6 module ( 200mmx75mm ) . 6 od3521 / 2023 2024:supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required. 8 module ( 125mmx125mm ) 7 od3520 / 2023 2024:supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required. 12 module ( 200mmx150mm ) 8 od3522 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 5 / 6 a switch 9 od3523 / 2023 2024:supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5 / 6 a socket outlet 10 od3524 / 2023 2024:supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 11 od3525 / 2023 2024:supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 12 way , double door 12 od3528 / 2023 2024:supplying and fixing single pole blanking plate in the existing mcb db complete etc. as required. 13 od3530 / 2023 2024:supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required single pole 14 od3529 / 2023 2024:supplying and fixing following rating, double pole, 240 v, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required. 63 a 15 od3531 / 2023 2024:supplying and fixing following rating, double pole, ( single phase and neutral ) , 240 v, residual current circuit breaker ( rccb ) , having a sensitivity current 30 ma in the existing mcb db complete with connections, testing and commissioning etc. as required. 63 a 16 od3532 / 2023 2024:wiring for circuit / submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 17 od3534 / 2023 2024:wiring for circuit / submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required4 x 2.5 sq. mm + 2 x 2.5 sq. mm earth wire 18 od3537 / 2023 2024:wiring for circuit / submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required 2 x 6 sq. mm + 1 x 6 sq. mm earth wire 19 od3538 / 2023 2024:installation of exhaust fan in the existing opening , including making good the damage, connection, testing , commissioning etc.as requiredup to 450 mm sweep 20 od3539 / 2023 2024:supplying and fixing 3 pin, 5 a ceiling rose on the existing junction box / wooden block including connections etc. as required. 21 od3540 / 2023 2024:installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable etc. as required. 22 od3543 / 2023 2024:supplying and fixing call bell / buzzer suitable for single phase, 230 v, complete as required. 23 od3544 / 2023 2024:laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. upto 35 sq. mm ( clamped with 1mm thick saddle ) 24 od3545 / 2023 2024:providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.250 a, 36ka, fpmccb 25 od3546 / 2023 2024:providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.125 a, 36ka, fpmccb 26 od3547 / 2023 2024:earthing with gi earth pipe 4.5 metre long , 40 mm dia including accessories, and providingmassonary encloser with cover plate having locking arrangement and watering pipe etc. ( but with charcoal / cock and salt as required. ) 27 od3549 / 2023 2024:providing and laying earth connection from earth electrode with 6 swg dia g.i. wire in 15 mm dia g.i. pipe from earth electrode including connection with g.i. thimble excavation and re filling as required. 28 od3548 / 2023 2024:providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required. 29 od3550 / 2023 2024:supplying and fixing of light class gi pipe of 50 mm dia ( nominal ) 3 meters length along the pole for protection of under ground cable as required. 30 od3844 / 2023 2024:rewiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm frls pvc insulated copper conductor single core cable as earth wire in existing surface / recessed steel / pvc conduit including dismantling as required. group a 31 od3845 / 2023 2024:laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. up to 35 sqmm 32 od3846 / 2023 2024:s / l of following size dwchdpepipe isi marked along with all accessories like socket , bend , couplers etc.conforming to is 14930 , partii complete with fittingand cutting , jointing etc .direct in ground ( 75 cm below ground level ) including excavationand refilling the trench but excluding sand cushioning and protective covering etc, complete as required ( a ) 63mm dia ( od 63mm id 51mm nominal ) . 33 od3847 / 2023 2024:laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc / hume / metal pipe as required. 34 od3966 / 2023 2024:wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group a 35 122.1.47:supply of 250 mm ( 10 inch ) sweep 1250 rpm exhaust fan fresh air type complete with shutter blades etc. as required. 36 od3551 / 2023 2024:supply of 1200 mm sweep 50 watt, energy saver isi marked bee 5 star rating ac ceiling fan suitable for 230 v, 50 hertz ac supply without regulator with blades , downrod etc. complete as required. 37 122.1.44:supply of led tube type luminaire 20 watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient leds with the following: ( a ) total system wattage 20 watt + / 5% ( b ) luminous efficacy lumens / watt >=95 ( c ) power factor >=0.95 38 122.2.2: p / fhot press sheet mouldedcompound ( smc ) fire retardant ( temp. resistance up to 200 c ) , ip 55 weather proof polebox of innerdimension 200x160x98mm ( ns ) complete with suitable arrangement for fixing of 2 nosof 6 to 32 amp single pole mcb & 63 amp. doublepole isolator ( mcb / isolator excluded ) withneutral link duly shorting on din channel with2 nos of ms clamps with ss back plateofsuitable size with danger monogram property printed on the coveretc asreqd. asreqd. 39 122.1.30:supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is 7098 of following size: 4c*25 sqmm 40 122.2.83:supply, installation, testing and commissioning of power distribution board made out of 1.6 mm sheet steel, epoxypowder coated , specially designed al bus bar 400a to 630a with heat shrinkcable colour coated sleeves suitable for accommodating mccbs / mcbs / isolators as incoming and outgoing as required ( without mccbs / mcbs / isolators ) complete with digital meter module, including voltmeter ammeter with selector switch, cts control fuse and indicating lights including connections etc. as required ( conforms to is:8623 ) 41 122.2.156. ( b ) :p&f following sizes of pvc insulated & pvc sheathed copper conductor 3 core submersible cable confirming to is.694 / 1990 etc. as reqd. 3x 4 sq.mm 42 122.2.155. ( c ) :supply, installation, testing and commissioning of cubical type control panel board for single phase & three phasesubmersible pumping set of following rating complete with contactor, relay , mcb , condenser , voltmeter, ammeter and indication lamp etc includingconnections etc as reqd. 3 hp ( three phase ) 43 122.2.150. ( c ) :supply, lowering and fixing following size of g.i. pipe ( m class ) i / c cutting threading on both sides etc. isi marked etcas reqd. 40mm ( nominal bore ) 44 122.2.154b. ( b ) :supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i / c connection etc. as reqd. single phase 3.0 hp having discharge of 100 lpm approx. at 52 m head 45 122.1.2:supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is 7098 of following size: 2c*6 sqmm 46 122.2.142. ( b ) :comprehensive amc ( annual maintenance contract ) for repair andmaintenance of tube wells installed at various municipal parks for depth of 50 meters to 100 meters. cost for one tube wells with submersible p / set etc of upto 3 hp...

Due Date : July 31, 2023

Tender Value : ₹ 14.25 Lakhs

View Tender
25
Public Works Department - Delhi

38748720 tender for provision of electrical works in nurse hostel at sanjay gandhi memorial hospital mangolpuri delhi 110083 1 wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. 2 group a 3 supplying and fixing of following sizes of steel conduit along with accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 4 25 mm 5 32 mm 6 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required. 7 3 x 1.5 sq. mm 8 6 x 1.5 sq. mm 9 3 x 4 sq. mm 10 6 x 4 sq. mm 11 3 x 6 sq. mm 12 6 x 6 sq. mm 13 wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed steel conduit as required. 14 2 x 16 sq. mm + 1 x 6 sq. mm earth wire 15 4 x 10 sq. mm + 2 x 6 sq. mm earth wire 16 fabrication, supplying and installation of outdoor type cubical feeder pillar of suitable size upto 350 mm deep made out of m.s. sheet 1.6mm. thick ( 16 swg ) duly compartmentalised havingal. busbar of minimum 300amp capacity double door with locking arrangement for protection from rain, dust, duly fixed on m.s. angle iron frame work of size 50 mm x 50 mm x 6 mm ( ns ) 50 cm long legs grouted in cement concrete mounted inside the cubical panel i / c connection, inter connection with aluminum thimbles, earth studs duly painted with one coat of red oxide & two coats of superior quality enamel paint complete etc. as reqd i / c supplying and fixing following accessories as per item i / c control wiring. 17 providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 18 250 a, 36ka, fpmccb 19 100 a, 30ka, fpmccb 20 supplying and fixing following rating, four pole, 415 v, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required.i ) 100 a 21 supplying and fixing following rating, double pole, 240 v, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required.i ) 63a 22 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) a ) 12 way , double door 23 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) ( a ) 8 way ( 4 + 24 ) , double door 24 supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.a ) single pole 25 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5 / 6 a modular socket outlet and 5 / 6 a modular switch, connections etc. as required. 26 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5 / 6 & 15 / 16 a modular socket outlet and 15 / 16 a modular switch, connections etc. as required. 27 supplying and fixing call bell / buzzer suitable for single phase, 230 v, complete as required. 28 supply, installation, testing and commissioning of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current ( bldc ) motor, class of insulation: b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value ( cmm / w ) minimum 6.85, air delivery minimum 215 cmm, 350 rpm ( tolerance as per is : 374 2019 ) , thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c ( max. ) , insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. 29 supplying, installation, testing and commissioning of surface / wall mounted 18 20 watt led tube with 4 feet batten fitting, led tube should have polycarbonate housing for efficient heat dissipation, in cool day light ( 5700 k to 6500 k ) as required i / c connection with 1.5 sq.mm. frls pvc insulated copper conductor, single core cable etc. as reqd. 30 supplying, installation, testing and commissioning of wall mounted decorative bracket light having complete fixture, 40 watt warm white lamp and opal white glass diffuser for glare free light etc. as reqd. 31 supplying, installation, testing and commissioning of 12w round full glow led surface downlight having polycarbonate body and 2.5kv surge protection etc. as reqd. 32 supply, installation, testing& commissioning of 150 mm sweep fresh air fan having minimum speed of 1350 rpm, 260cubic meter per hour air flow, maximum power consumption of 30 watt, in the existing opening including making good the damages, connection testing and commissioning etc. complete as required. 33 supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required. 34 1 or 2 module ( 75mmx75mm ) 35 6 module ( 200mmx75mm ) 36 supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 37 3 pin 5 / 6 a socket outlet 38 5 / 6 a switch 39 telephone socket outlet 40 tv antenna socket outlet 41 supplying & fixing suitable size gi box wih modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, c curve including connections, painting etc. as required. 42 supplying, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of followingsize aluminium conductor armoured cable on wall surface as required. 43 3.5 x 95 sq. mm 44 supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930, part ii complete with fitting and cutting, jointing etc.direct in ground ( 75 cm below ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 45 90 mm dia ( od 90 mm & id 76 mm nominal ) 46 earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required. 47 supplying , installation, testing and commissioning of 3 dimensional led backelite out door type ip66 display board in bilingual ( hindi / english ) as per approved color and design, stainless steel i.e. back side 4mm thick sun board and in front laser cut acrylic sheet of 3mm thick of approved quality and color as per latter pattern 1 to 2 collar ( as per board size ) to fixed inside the ss latters and joint to be filled up with water proof silicon where ever required to make the whole structure waterproof & dustproof. provided inside the latter power led module each 48 consisting of 3 nos. led ( as per board size ) minimum 75 lumen per watt, 100ma power current, 12volt in two rows along the periphery of each alpha per, shall be fixed in such a way to give uniform bright light to the character latters and other accessories to be fixed on aluminium composite panel ( acp ) of 4mm thick exterior grade aluminium not less that 0.5mm of approved brand fixed on ms welded structure made out of 2mm thick 65mm x 65mm ms square pipe section with stiffness welded vertically and horizontally in regular interval with pipe from and the pipe frame shall be covered from back front facia shell covered by gi sheet along with latter shell be fixed and riveted all sides i.e. wiring and entire board specially designed power cable for power led shall be of outdoor grade, appx, size led make samsung, hi light, osram actual size of various board to approved by engineer in charge before supply the material and installation at site fixing. 49 supplying, installation, testing & commissioning of led flood light fixture with ip 66 & ik 07 protection pressure aluminium die cast housing capable of delivering a following lumens output with a minimum system efficacy more than 110 lumens / watt and a cri greater than 70 . the luminaire shall have a life class of 50000 hours @l70 for a design ambient of 35 deg c . the inbuilt electronic driver shall operate at power factor > .95 of cct 5700k minimum internal surge protection of 4 kv with toughned glass / polycarbonated cover lm 79 / 80 certification to be provided by the manufacturer for led luminaire / led chip complete etc. 50 22000 lumens 51 sitc of full stainless steel body water dispenser with storage capacity of 120 litre, 60 lph cooling capacity , r 134a type refrigerant i / c complete electrical and plumbing works required to make the system functional along with dismantling of existing system and less credit for the same....

Due Date : July 28, 2023

Tender Value : ₹ 20.22 Lakhs

View Tender
26
Municipal Corporation - Delhi

38701477 r / o of wiring and p / o ei at puhc tuglakabad village dispensary electrical work. 1 od3939 / 2023 2024:wiring for light / power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit alongwith 1 no. 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required. 2 od3984 / 2023 2024:wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required. ( a ) 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 3 od3987 / 2023 2024:wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required. ( b ) 2 x 6 sq. mm + 1 x 6 sq. mm earth wire 4 od3989 / 2023 2024:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required. 3x2.5 sq. mm 5 od3990 / 2023 2024:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required.3 x 4 sq. mm 6 od3991 / 2023 2024:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required. 3x6 sq. mm 7 od3992 / 2023 2024:supplying and fixing following piano type switch / socket on theexisting switch box / cover including connections etc. as required. ( a ) 5 / 6 amps switch 8 od3993 / 2023 2024:supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required. ( a ) pin 5 / 6 a socket outlet 9 od3994 / 2023 2024:supplying and fixing metal box of 180mm x 100mm x 60mm deep ( nominal size ) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5 / 6 & 15 / 16 a socket outlet and 15 / 16 a piano type switch, connections, painting etc. as required. 10 od3995 / 2023 2024:supplying and fixing metal box of 150mm x 75mm x 60mm deep ( nominal size ) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5 / 6 a socket outlet and 5 / 6 a piano type switch, connections, painting etc. as required. 11 od3996 / 2023 2024:installation of exhaust fan in the existing opening , including making good the damage , connection, testing, commissioning etc.as required. ( a ) up to 450 mm sweep 12 od3997 / 2023 2024:providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 a, 16 ka, tpmccb 13 od3998 / 2023 2024:providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 400 a, 36ka, fpmccb 14 od3999 / 2023 2024:supplying and fixing cable end box ( loose wire box ) suitable for following single pole and neutral, sheet steel, mcb distribution board, 240 volts, on surface / recess, complete with testing and commissioning etc. as required. for 8 way, double door spn mcbdb 15 od4000 / 2023 2024:supplying and fixing cable end box ( loose wire box ) suitable for following single pole and neutral, sheet steel, mcb distribution board, 240 volts, on surface / recess, complete with testing and commissioning etc. as required.for 6 way, double door spn mcbdb 16 od4001 / 2023 2024:supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. ( a ) single pole 17 od4002 / 2023 2024:supplying and fixing following rating , double pole, 24o volt, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required. ( b ) 63 amps 18 od4003 / 2023 2024:supplying and fixing 20 a, 240 v, spn industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 a c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 19 od4004 / 2023 2024:earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. 20 od4006 / 2023 2024:supplying and laying 25 mm x 5 mm g.i strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with g.i. nut, bolt, spring, washer etc. as required. ( jointing shall be done by overlapping and with 2 sets of g.i. nut bolt & spring washer spaced at 50mm ) 21 od4007 / 2023 2024:p / f 6 swg dia gi wire on surface or in recess for loop earthing along with existing surface / recess conduit / submain wiring cable as reqd. 22 od4008 / 2023 2024:laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. upto 35 sq. mm ( clamped with 1mm thick saddle ) 23 od4009 / 2023 2024:laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. up to 35 sqmm 24 122.1.47:supply of 250 mm ( 10 inch ) sweep 1250 rpm exhaust fan fresh air type complete with shutter blades etc. as required. 25 od4011 / 2023 2024:supply of 15 ( 380mm ) sweep 1400 rpm exhaust fan heavy duty complete with shutter, blade etc. as required. 26 od4012 / 2023 2024:supply of 1200 mm sweep 50 watt, energy saver isi marked bee 5 star rating ac ceiling fan suitable for 230 v, 50 hertz ac supply without regulator with blades, downrod etc. complete as required. 27 122.2.39:s / i / t / c of led tube type luminaire 20 watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient leds with the following: ( a ) total system wattage 20 watt + / 5% ( b ) luminous efficacy lumens / watt >=95 ( c ) power factor >=0.95 28 122.2.38:s / i / t / c of surface mounting crca housing 36w led luminaire with acrylic cover diffuser with following specifications including fixing on existing wall / recess with connections as reqd. ( a ) total system wattage = 36 watt + / 5% ( b ) luminous efficacy >=95 lumens / watt. ( c ) power factor >=0.95 29 122.1.37:supply of xlpe insulated pvc sheathed al. conductor un armoured cable 1.1kv grade conforming to is 7098 of following size: 2c*10 sqmm 30 122.1.39:supply of xlpe insulated pvc sheathed al. conductor un armoured cable 1.1kv grade conforming to is 7098 of following size: 2c*25 sqmm 31 122.1.30:supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is 7098 of following size: 4c*25 sqmm 32 122.1.32:supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is 7098 of following size: 4c*50 sqmm 33 122.2.7: fabrication, supply & erection of following size flange mounted hot dip galvanized octagonal pole made from ht steel plate, window with flash cover with full vertical window cover at appropriate height from the base plate on existing cement concrete pedestal as required. i / c supplying and fixing of 6 mm thick laminated mounted sheet inside the window mounted on and i / c providing and welding 3 nos. gi strips 4 mm thick of suitable length and having suitable size tapped holes as reqd, terminal block suitable for 25 sq mm conductor 4 nos. & shorting links on din channel i / cpdg and fixing din channel of suitable length, , 6 amp. spmcb c characteristics, earth stud, cable support clamp suitable for upto 4x25 sqmm cable. logo / name of manufacturer shall be embossed on the pole. galvanization as per relevant is.5.0 mtr height, 3 mm thick, bottom dia of 130mm & top dia of 70mm base plate of size 225 x 225 x 12 mm thick 34 122.2.10.a:providing and laying in position m25 grade reinforced cement concrete foundation of size 450 mm ( l ) ×450 mm wide and 1000 mm deep i / c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia 960 mm long ( approx ) 8 nos. and reinforcement of cold twisted bars of 8 mm dia 1400 mm ( approx ) 6 nos. ( with 150 mm spacing ) as required with supplying and positioning of 4 nos. foundation bolts16 mm dia, 600 mm long, j type i / c 2 nos. template anchor plates of size 225mm×225mm×3mm and providing dwc hdpe for cable entry and exit as required for 3 m and 5 mtr pole. 35 122.2.15:fabrication, supplying and fixing class b galvanised single overhang arm bracket made out of 250mm long galvanised top tube with cap and 250mm long 32 mm dia galvanised pipe with tightening bolts complete as required....

Due Date : July 25, 2023

Tender Value : ₹ 7.13 Lakhs

View Tender
27
Ministry Of Drinking Water And Sanitation - Delhi

38427156 bids are invited for amc for electrical equipment 1 52 2 point extension board 5amp , 2 point extension board 15amp , 3 point extension board 5amp , 3 point extension board 15amp , 4 point extension board 5amp , 4 point extension board 15amp , 5 point extension board 5amp , 5 point extension board 15amp , call bell electric , call bell ballery operated , remote bell , 5 amp socket mark , 15 amp socket mark , 5 amp switch mark , 15 amp switch mark , 2 core wire , 3 core wire , earth wire , flexible wire , 1.5mm copper wire , 4mm copper wire , 6mm copper wire , 2 pin plug 5 amp , metal plug , 3 pin plug 5 amp , 3 pin plug 15 amp , 3 pin multi plug 5 amp , 3 pin multi plug 15 amp , plug light 5 amp , plug power 15 amp , 5 pin top , multi socket power , multi socket light , mcb 10 amp , mcb 20 amp , mcb 64 amp , mcb 32 amp , mcb box complete , ac top of metal box , color bulb , pvc pipe , pvc channel , fan capacitor 2.5 , board with 4 switch socket , 5 pin socket , dismantling of wall fan , fixing of wall fan , rewinding of fan motor , modular socket , modular sheet , modular switch , modular box , led 2x2 36 watts , led round big , led round small , wall fan , pedestal fan , cleaning of wall fan with oiling , hot case , 2.5 mm wire , modular mcn , led tublight , led down light , fixing or dismantling of 2x2 panel light , repair of power point, switch or plug , led driver , repair of 2x2 panel light , flexible pipe , dismantling of old wiring , strip light , fixing of led light , provision of new linear light , fixing and dismantling of call bell , repair of hot case , repair of wall fan , repair of induction cooker , hot case thermostat , repair of call bell total quantity : 78...

Due Date : July 14, 2023

Tender Value : ₹ Ref. Documents

View Tender
28
Jamia Hamdard - Delhi

38180495 tender document for electrical work required at room no. 115, ground floor, sper. jamia hamdard1 laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. a upto 35 sq. mm (clamped with 1mm thick saddle) 40 2 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer) as required. (note: vertical type mcb tpdb is normally used where 3 phase outlets are required.) make anchor/abb/legend a 4 way (4 + 12), double door 1 3 supply and fixing following capacity 63a tpn in existing d.b of vtp, 415v, complete with connections, testing and commissioning etc. as required. make abb/havells/l&t 1 4 supply and fixing following capacity tpn with box, 415v, complete with connections, testing and commissioning etc. as required. make abb/havells/l&t a 32a 4 5 wiring for circuit/ sub main wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required make polycab/havells a 5 x 4 sq. mm 50 6 supply of cables for following size of pvc insulated and pvc sheathed / xlpe aluminum armod conductor cable of 1.1 kv...

Due Date : June 19, 2023

Tender Value : ₹ 62000.0

View Tender
29
Jamia Hamdard - Delhi

38180489 tender document for tender for electrical work required at jln hostel boys and girls jamia hamdard 1 wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required. make polycab/havells a 2 x 4 sq. mm + 1 x 4 sq. mm earth wire 2 supplying and fixing following size/ modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required make anchor/roma a 3 module (100mmx75mm) 3 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. make anchor/roma a 15/16 a switch b 6 pin 15/16 a socket outlet 4 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. make l&t/havells/hager a single pole...

Due Date : June 19, 2023

Tender Value : ₹ 69000.0

View Tender
30
Eastern Dedicated Freight Corridor - Delhi

38036617 purchase of electrical trd items for maintenance of trd assets in ddu cpbn section of dfccil., guy rod ( 9.3m ) ri no.5004 [ warranty period: 30 months after the date of delivery ] , anchor loop ri no.5008 [ warranty period: 30 months after the date of delivery ] , guy rod ( 9.7m ) ri no.5005 [ warranty period: 30 months after the date of delivery ] , anchor v bolt ri no.5007 1 [ warranty period: 30 months after the date of delivery ] , bfb steady arm swivel ri no.2392 [ warranty period: 30 months after the date of delivery ] , bfb steady arm hook ri no.2391 1 [ warranty period: 30 months after the date of delivery ] , register arm eye piece ri no.2422 2 [ warranty period: 30 months after the date of delivery ] , tubular stay adjuster ri no.2402 [ warranty period: 30 months after the date of delivery ] , tubular stay adjuster ( large ) ri no.2402 1 [ warranty period: 30 months after the date of delivery ] , splice for 125 sq.mm catenary ri no.1090 [ warranty period: 30 months after the date of delivery ] , catenary wire ending clamp ri no.1140 [ warranty period: 30 months after the date of delivery ] , suspention clamp body ( ri no.1161 ) & cu lock plate ( ri no.1163 ) [ warranty period: 30 months after the date of delivery ] , contact wire dropper clip part ( cw / td / dc ac / p / 013 ) [ warranty period: 30 months after the date of delivery ] , contact wire swivel clip part ( ri no.1221 ) & contact wire swivel clip pin ( ri no.1222 ) [ warranty period: 30 months after the date of delivery ] , catenary dropper clip ( fm / dc ac / 10 ) [ warranty period: 30 months after the date of delivery ] , parallel clamp jumper ( 160 ) / contact ( 193 ) or catenary ( 129 ) fm / dc / ac / 21 [ warranty period: 30 months after the date of delivery ] , compensating plate ri no.5191 [ warranty period: 30 months after the date of delivery ] , dropper clip 25mm dia ri no.2471 1 [ warranty period: 30 months after the date of delivery ] , dropper clip 49mm dia ri no.2277 [ warranty period: 30 months after the date of delivery ] , dropper clip 34mm dia ri no.2461 1 [ warranty period: 30 months after the date of delivery ] , eqalizing plate ri no.5192 [ warranty period: 30 months after the date of delivery ] , splice for 150 sq.mm contact wire cw / td / dc ac / p / 004 [ warranty period: 30 months after the date of delivery ] , 25mm drop bracket part ri no.2361 1 [ warranty period: 30 months after the date of delivery ] , large register arm hook top 2161 2 & large register arm hook bottom 2162 2 [ warranty period: 30 months after the date of delivery ] , tubular stay sleeve forged ri no.2403 2 [ warranty period: 30 months after the date of delivery ] , double eye distance rod ri no.5183 [ warranty period: 30 months after the date of delivery ] , guy rod double strap assembly ( 150 / 250 ) ri no.5222 [ warranty period: 30 months after the date of delivery ] , 18mm single clevis ri no.5041 1 [ warranty period: 30 months after the date of delivery ] , raised register arm adjuster ( 25mm ) ri no.2432 [ warranty period: 30 months after the date of delivery ] page 4 of 11 run date / time: 06 / 06 / 2023 15:12:57edfc field unit ddu electrical / edfc tender document , tube cap 40 mm ri no.2104 1 [ warranty period: 30 months after the date of delivery ] , tube cap 25 mm ri no.2423 1 [ warranty period: 30 months after the date of delivery ] , suspention clamp body & keeper piece ( 1581 ) & ( 1582 ) [ warranty period: 30 months after the date of delivery ] , 25 mm steady arm clamp assembly ri no.2491 2 & 2492 2 [ warranty period: 30 months after the date of delivery ] , p.g clamp suitable for 160 sq.mm jumper copper & 150 sqmm hdbc copper cross feeder ( fm / dc / ac / 13 ) [ warranty period: 30 months after the date of delivery ] , p.g clamp suitable for 160 sq.mm jumper copper & 288 sqmm aaa feeder wire [ warranty period: 30 months after the date of delivery ] , guy rod stirrup ri no.5002 [ warranty period: 30 months after the date of delivery ] , large catenary suspention bracket ri no.2131 & 2132 [ warranty period: 30 months after the date of delivery ] , double suspention clamp ri no.1171, 1172 & 1174 [ warranty period: 30 months after the date of delivery ] , p.g clamp ( 150 / 105 150 ) ri no.1051 2 [ warranty period: 30 months after the date of delivery ] , p.g clamp ( 150 160 ) ri no.1051 3 [ warranty period: 30 months after the date of delivery ] , standard antiwind clamp ri no.2551 1 & 2503 [ warranty period: 30 months after the date of delivery ] , 93.3 sq.mm / 93.3 sq.mm earth wire aerial earth wire parallel groove clamp ( pg 93.3 / 93.3 ) [ warranty period: 30 months after the date of delivery ] , 288 sq.mm / 288 sq.mm feeder wire parallel groove clamp ( pg288 / 288 ) [ warranty period: 30 months after the date of delivery ] , pg clamp ( 50 sq.mm jumper / 93.3 sq.mm anti creep wire bimettalic sleeve ) pg50 / 93.3 [ warranty period: 30 months after the date of delivery ] , flat armour tape [ warranty period: 30 months after the date of delivery ] ajay kumar apm / el / kwdn bihar 400.00 metre , large span wire ending clamp ( 130 ) ri no.1131, 1143 & 1102 [ warranty period: 30 months after the date of delivery ] , armour tape ferrule [ warranty period: 30 months after the date of delivery ] , 9 tonne adjuster eye & clevis type ri no.5020 1 [ warranty period: 30 months after the date of delivery ] , 09 tonne adjuster double clevis type ri no.5020 2 [ warranty period: 30 months after the date of delivery ] ...

Due Date : July 06, 2023

Tender Value : ₹ Ref. Documents

View Tender
31
Public Works Department - Delhi

37557322 tender for eor to providing electrical installations, cctv cameras at veterinary hospital, kakrola gnct delhi 1 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. 2 group c 3 wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 4 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire 5 2 x 4 sq. mm + 1 x 4 sq. mm earth wire 6 2 x 6 sq. mm + 1 x 6 sq. mm earth wire 7 4 x 4 sq. mm + 2 x 4 sq. mm earth wire 8 4 x 6 sq. mm + 2 x 6 sq. mm earth wire 9 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch, connections etc. as required. 10 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 a & 15/16 a modular socket outlet and 15/16 a modular switch, connections etc. as required. 11 supplying and fixing call bell/ buzzer suitable for single phase, 230 v, complete as required. 12 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 13 5/6 a switch 14 15/16 a switch 15 3 pin 5/6 a socket outlet 16 bell push 17 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 18 supplying and fixing following size/ modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required. 19 8 module (125 mmx125 mm) 20 supplying and fixing 20 amps, 240 volts, spn industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 21 supplying, erection, testing and commissioning of 1200mm sweep energy sever electric ceiling fan capacitor type with double ball bearing complete with capacitor, 300mm down road, canopies, shackles, three number blade & suitable for operation on 230 volts 50 hz, single phase a.c. supply including wiring the down rod of suitable with 1.5 sqmm. pvc insulated copper conductor single core frls cable, earthing the regulator etc. as required. 22 supply, installation, testing and commissioning of surface/recess typewall mounted integrated led 4 feet fitting with aluminium channel housing for having minimum system lumens 2000 & system efficacy 100 lumens/watt self ballastedwith pc diffuser having, power factor of =0.95, cri of =80, thd =10%, cct 5500 6600k(as required), suitable for 230 v, 50 hz,1 ¢ ac supply i/c fixing the same directly onwall/ceiling i/c connections with 1.5 sqmm., pvc insulated, frls copper conductor,single core cable, earthing etc. as required. 23 supply, installation, testing and commissioning of recess mounted 2 x 2 (nominal size) led panel, made out of crca powder coated enclosure with suitable glear free diffuser having system lumens output not less than3600, efficiency =100lumens/watt, power factor of =0.95, cri of =80%, thd =10%, cct 4000 6600k(as required), suitable for 230 v, 50 hz,1 ¢ ac supply etc. as required. 24 supply, installation, testing and commissioning of surface mounted round / square led downlighterhaving minimum system lumens output 1500 & system efficacy 100 lumens/watt and colour temperture of 4000 6600 kelvin, cri =80%,having power factor=0.95, thd =10%etc. complete as reqd. 25 supplying, installation, testing & commissioning of300 mm sweep 900 rpm heavy duty exhaust fan along with louver shutters and all accessories suitable for operate on single phase 230 volts 50 cycles per second a.c. supply etc as reqd, including making the hole to suit the size of the above fan, making good the damage,connection, earting etc. as required. 26 supplying, installation, testing & commissioning of flood light fitting led made of pressure die cast aluminum with high power ledhaving minimum system lumens 8400 & system efficacy 120 lumens/watt, cct = 3000 6500k, cri=70, surge protection device = 4kv, secondary optics with lens, ip 66 housing, electronic driver, on the existing pole / wallincludingconnection etc. complete as required. 27 supplying and fixing of4 way weather proof dust and verimin proofpole boxout side size 317 mm ( h) x 265 mm (w)x 160 mm (d) with bus bar dinbar, earthbar , neutral link detachable gland plate etc i/c 1 nos 10 amp, c curvespmcb, connection complete etc as reqd. 28 supplying and fixing following way, single pole and neutral, sheet steel,mcb distribution board, 240 v, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (but without mcb/rccb/isolator) 29 12 way, double door 30 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/ isolator) 31 8 way (4 + 24), double door 32 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a, tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and mccb incomer) as required. (note : vertical type mcb tpdb is normally used where 3 phase outlets are required.) 33 8 way (4 + 24), double door 34 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 35 single pole 36 single pole and neutral 37 triple pole and neutral 38 supplying and fixing following size of triple pole mcb suitable for including load in the existing mcb db with connection testing & commissioning etc as reqd. 39 63 a tp mcb 40 providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 41 125 a, 16 ka,tpmccb 42 supplying and fixing dp sheet steel enclosure on surface/ recess along with 25/32 a, 240 v “c” curve dp mcb complete with connections, testing and commissioning etc. as required. 43 supplying and layingof one numberxlpe insulated pvc outer sheathed armoured cable with al. conductor suitable for rated voltage of 1100 volts isi marked conforming to is:7098 1988 with upto date ammendements offollowing size in following way etc as required 44 3 x 10 sqmm (on surface) (clamped with 1mm thick saddle) 45 supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 46 3 x 10 sq. mm (22mm) 47 sitc ofminimum 1.5 tr. rated as per star rating ammended up to dateair cooled inverter type splitair conditioners complete with indoor unit, out door unit,rated minimumcooling capacity5200 watt , r 32 or equivalent refrigerant, remote control (cordless),suitable for 230v ±10%, 1 ?, 50 hz, ac supply capable of performing cooling, dehumidification, air circulation with scroll / reciprocating / rotary type compressor etc. as required. 48 supplying, installation, testing and commissioning of electronic voltage stabilizer of capacity : 4 kva (suitable for upto 1.5 tr. ac) for voltage correction, low / high voltage cut off, overload cut off with automatic reset, fail safe circuit protection, main turn on delay, wall mounting cabinet design etc as required. input voltage : 150 – 280v ±5% output voltage : 200 – 250 v±5% 49 sitc of minimum2 tr . rated as per star rating ammended up to dateair cooled inverter type splitair conditioners complete with indoor unit, out door unit,rated minimumcooling capacity7000 watt , r 32 or equivalent refrigerant, remote control (cordless),suitable for 230v ±10%, 1 ?, 50 hz, ac supply capable of performing cooling, dehumidification, air circulation with scroll / reciprocating / rotary type compressor etc. as required. 50 supplying, installation, testing and commissioning of electronic voltage stabilizer of capacity : 5 kva (suitable for upto 2 tr. ac) for voltage correction, low / high voltage cut off, overload cut off with automatic reset, fail safe circuit protection, main turn on delay, wall mounting cabinet design etc as required. input voltage : 140 – 280v ±5% output voltage : 200 – 250 v±5%) 51 supplying & fixing of copper refrigerant pipe of size 1/4, 5/8 with insulation and copper wire 3 core 80 20 i/c all connection in the existing ac units as per reqd at site. 52 providing & fixing of ms powder coated outdoor wall mounting stand suitable for 1.5/2.0 tr capacity split ac outdoor unit complete as reqd. 53 supplying & fixing of 25 mm dia pvc heavy duty pipe drainage in the existing split type ac unit with supporting clamps etc complete as reqd. 54 sitc of 4 mega pixel ip bullet camera, lens range 3 9 mm or better varifocal lens full hd 1080p @ 30fps, 1/2.8 cmos sensor, wide dynamic range 120db, color night vision (0.0008 to 0.012 lx), ir range: 30mtrs, h.265 smart coding, fips compliant, ip66, ik10, 14 users (depends on network conditions), audio compression g.726 (adpcm) : 16 kbps / 32 kbps, audio in / out port, with memory card slot, poe enabled, onvif profile s and g compliant, blc/hlc functions, video analytics including motion dtection and tripwire, ul/bis/en certified 55 sitc of 16ch network video recorder with license of 16 cameras, nvr, supports h.265 / h.264 mixed recordings. high speed copy to usb storage, linux/server based 4 sata hard disk supported, upto 40tb of storage supported, h.265/h.264 compression, jpeg ,supported audio format g.711 for onvif, g.726 32 kbps, monitor : 1 x hdmi connector, 1 x vga, network port 1 x 10base t / 100base tx / 1000base t (rj45), remote view via mobile app and computer application included. 56 sitc 32 tv ,1,920 x 1,080 (fhd), brightness (cd/m2) 400, tv reception• (dvbt2 / c / s2),audio 10w + 10w,headphone out, hdmi in (1.4), usb (2.0), ci slot, power 100 ~ 240, 50/60 , etc. as reqd. 57 sitc 8 ports 10/100/1000mbps poe + 2 ports 100/1000mbp smart managed switch 58 sitc of 6 tb surveillance hdd make seagate , wd, toshiba etc as reqd. 59 supply and fixing of patch panel cat 6 utp keystone type 24 port fully loaded complete etc as required. 60 supply, installation, testing and commissioning of cat 6 patch cord .5 meter , 4 pair requirements complete as required . 61 supply installation testing commissioning of following pole / wall mounting 6u rack m.s powder coated rack with glass front door, fan, steel rear door, power supply, mcb, cable manager, drawer shelves and wiring channels to accommodate cctv systems equipment and complete with accessories as reqd 62 wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required 63 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire 64 supplying and drawing of utp 4 pair cat 6 armored lan cable in the existing surface/ recessed steel/ pvc conduit as required. 65 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 66 25 mm 67 supplying, installation, testing and commissioning of water cooler of following specification i/c making all cpvc pipe connection between ro to water cooler and main outlet of water connections are included in the scope of work i/c providing and fixing angle iron frame work made out of 35mm x 35 mm x 6 mm thick angle iron of suitable dimension, making water intel, outlet and overflow pipe connection etc. complete as reqd. 68 cooling capacity : 150 ltr/ hour 69 power supply: 230 +/ 10%, 50 hz single phase ac 70 storage capacity : 150 ltr. 71 1 no. silt blockers 72 supplying, installation, testing, commissioning of ro system 100 ltr. with uv water purifier system of 100 lph capacity i/c making plumbing connections and inter connection with pipe, pipe accessories i/c all cpvc pipe connection between ro to water cooler and main outlet of water connections are included in the scope of work complete etc. as required. 73 supplying, installation, testing and commissioning ofminimum 340litres storage capacityfrost free double doormnimum 4 star rating refrigerator etc complete as required as per direction of engineer in charge. 74 sitc of25 liter storage type geyser 5 star rating, vertical type complete with glass lined tank duly insulated, thermostate, 2 kw element, i/c supply and fixing 2 no. water connection for inlet and outlet water supply point with geyser, geyserfixed on wall withdesh fastner etc complet as required. 75 supplying & fixing suitable size gi box wih modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, “c” curve including connections, painting etc. as required. 76 supply, installation, testing and commissioning of ongrid solar photovoltaic power plant conforming to mnre specifications as amended, consisting of mono/poly crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on aluminium/gi structure of suitable strength with following components complete as required: 77 a) solar photovoltaic module of capacity 330 wp or above, manufactured in india, conforming to is 14286/iec 61215, is/iec 61730 part 1, is/iec 61730 part 2. solar photovoltaic module conversion efficiency shall not be less than 16.5%. pv modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. 78 b) power conditioning unit (pcu) of 350 800 v dc input voltage range and 400 v ac, three phase, 4 wire, 50hz +/ 2.5 hz, output voltage suitable to generate ac power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree c. the pcu shall adjust the voltage and frequency level to suit the grid voltage frequency. 79 c) data monitoring system complete with accessories 80 d) fixing of array junction box & main junction box with ip 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required 81 e) lightning and surge voltage protection. 82 f) connections & interconnections by supplying & fixing required size xlpe insulated copper conductor 1.1 kv grade armoured power and control cables between solar modules, main power cable to grid supply pcu unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required. ...

Due Date : May 15, 2023

Tender Value : ₹ 33.72 Lakhs

View Tender
32
Military Engineer Services - Delhi

37189771 repair / maintenance of internal electrification fitting / fixtures atsangli apartments, ahq camp lodhi road and new echs polyclinic area lodhi road under ge new delhi 1 taking down copper/aluminium point wiring ( fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,light fittingetc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed. 2 .m&l for point wiringwith pvc insulated unsheathedmulti strandedfrls type copper conductor cable of size 1.5 sqmm 1100 v grade including one run of pvc insulated unsheathed multi stranded frls type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including pvc concealed conduit 20 mm dia medium grade isi marked andits accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators complete all as specified and directed for the following : 3 one light/ceiling fan/exhaust fan point controlled by one way switch 5 amps. 4 one bell /buzzer point controlled by one bell push 5 one 3 pin 5 amps socket outlet point controlled by one way switch on independent board. 6 one 3 pin 5 amps socket outlet point controlled by one way switch on same board. 7 all as per item no 2 above but point wiring with 2.5 sqmmsingle core coppercable and earth continuity wire with 2.5 sqmm single core cable for one three pin 15 socket outlet point on independent board complete all as specified and directed by engineer in chargemake rr,polycab/havells. 8 m&l in cutting,making of hole in any type of wall suitable for fixing in exhaust fan size upto 250mm including making of good surfaces to wall and distrubed area compete all as specified and directed by engr in charge. 9 taking down of submain wiring including taking out conduit pipe of any description and of any size complete all as specified and directed by engineer in charge 10 s&f in replacement submain wiring alongwith earth wire with 2 run of 4 sqmm (main cable and neutral) and one run of 4 sqmm as earth wireof frls pvc insulated copper conductor, single core cable drawn throughand including rigid pvc conduit of20 mm dia bore with all fittings accessories complete all as specified and directed by engineer in charge. make rr,polycab,havells. 11 s&f in replacement submain wiring alongwith earth wire with 2 run of 6 sqmm (main cable and neutral) and one run of 6 sqmm as earth wireof frls pvc insulated copper conductor, single core cable drawn throughand including rigid pvc conduit of 20 mm bore with all fittings accessories complete all as specified and directed by engineer in charge. make rr,polycab,havells. 12 s&fin replacement submain wiring alongwith earth wire with 2 run of 10 sqmm (main cable and neutral) and one run of 10 sqmm as earth wireof frls pvc insulated copper conductor, single core cabledrawn throughand including rigid pvc conduit of 20 mm bore with all fittings accessories complete all as specified and directed by engineer in charge.make rr,polycab,havells.note for item no 6 to 8 : 2 run of main cable, one run of earth wire and one run length of pvc conduit of suitable bore shall be considered as one run all as specified. 13 s&f in replacement of modular switch 6 amps 250 v ac one way with isi mark including 6 amps switch frame complete all as specified and directed by engr in charge. make l&t,havells,legrand. 14 s&f in replacement of modular switch 16 a sp one way 240 voltswith isi markcomplete all as specified and directed by engr in charge . make l&t,havells,legrand. 15 s&f in replacement modular socket 6 a multi socket for 2 pin and 3 pin 240 volts with isi mark complete all as specified and directed by engr in charge. make: legrand/indoasian/havells 16 s & f in replacement ofmodular socket outlet 16 a 2/3 pin combined 240 volts with isi markcomplete all as specified and directed by engr in charge. make: legrand/indoasian/havells 17 s&f in replacement modular bell push 6awith neon 1 module 240 volts with isi markcomplete all as specified and directed by engr in charge. make: legrand/indoasian/havells 18 s&f in replacement switch piano flush button single pole one way 6 ampscomplete all as specified and directed by engr in charge. make: indoasian/anchor/havells 19 s&f in replacement switch piano flush type 15 amps single pole one waycomplete all as specified and directed by engr in charge. make: indoasian/anchor/havells 20 s&f in replacement of socket outlet5/6 amps 2 in 1, 3 pin flush typecomplete all as specified and directed by engr in charge. makelegrand/indoasian/havells 21 s&f in replacement socket outlet 2 in 1, 3 pin 5 and 15 amp, flush type complete all as specified and directed by engr in charge. make: indoasian/anchor/havells 22 s&f in replacement ceiling rose, 3 phase/ pvc/ polycarbonate isolated body complete all as specified and directed by engr in charge. make: indoasian/anchor/havells 23 s&f in replacement electronic fan regulator modular type 120 watt step type double modular as per existing complete all as specified and directed by engr in charge. make:legrand/indoasian/havells 24 s&f in replacementdimmer/ step type electronic fan regulator flush type 230 volts complete all as specified and directed. make: legrand/indoasian/havells 25 s&fin replacementelectric bell ding dong ac 230 volt complete all as specified and directed by engr in charge. 26 taking down db of spn 4/8/12 way type removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc complete all as specified and directed. 27 s&f in replacement sheet metal enclosures for dbs when mcb to be used,spn double door 240 volt, 12 way with 200 amps rated bus bar complete all as specified and directed. make: legrand/indoasian/havells 28 s&f in replacement sheet metal enclosures for dbs when mcb to be used, spn double door 240 volt, 8 way with 200 amps rated bus bar complete all as specified and directed. make: legrand/indoasian/havells 29 s&f in replacementsheet metal enclosures for dbs when mcb to be used, spn double door 240 volt, 4 way with 200 amps rated bus bar complete all as specified and directed by engr in charge. make : legrand/indoasian/havells 30 taking down mccb/mcb type removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc complete all as specified and directed. 31 s&f in replacementofmcb tpn 40 to 63 amps, 415 v complete all as specified and directed by engineer in charge.make : legrand/indoasian/havells 32 s&f in replacementofmcb spn 40 to 63 amp 240 volt 10 ka complete all as specified and directed. make: legrand/havells/hpl 33 s&f in replacementofmcb spn32 amp 240 volt 10 ka complete all as specified and directed. make:legrand/indoasian/havells 34 s&f in replacement mcb sp 40 amp to 63 amp 10 ka.240 volts complete all as specified and directed. make : legrand/indoasian/havells 35 s&f in replacement mcb sp 6 amp to 32 amp 10 ka.240 volts complete all as specified and directed. make: lelegrand/indoasian/havells 36 s&f in replacement metal clad enclosurewith one mcb single pole, 20 amps 240 volts complete all as specified and directed. make: legrand/havells/indo asian 37 s&f in replacement metal clad enclosurewith one mcb single pole, 32 amps 240 volts complete all as specified and directed. make: legrand/havells/indo asian 38 s&f in replacement modular plug & sockets distribution boardwith one mcb single pole, 32 amps 240 volts. complete all as specified and directed. make legrand/havells/indo asian 39 supply and fixing in replacement led lights fitting 1x 20w, 220v,ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by engineer in charge. 40 supply and fixingin replacement led lights fitting 1x 18w, 220v, ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by engineer in charge. 41 supply and fix in replacement only decorative laminated sheet 3mm thick of size 8 x 12 including necessary cutting of sheet for fixing switch / socket complete as specified and directed. 42 supply and fix in replacement only decorative laminated sheet 3mm thick of size 8 x 5 including necessary cutting of sheet for fixing switch / socket complete as specified and directed. 43 supply and fix in replacement only decorative laminated sheet 3mm thick of size 7 x 4 including necessary cutting of sheet for fixing switch / socket complete as specified and directed. 44 supply and fix only fan capacitor of the following capacity: 45 1.5 mfd 46 2.5 mfd 47 3.15 mfd 48 supply and fix in replacement only non metallic rigid pvc conduit medium grade 20 mm dia, isi mark complete all as specified and directed. make : kalinga premium/ supreme/ finolex 49 taking down of ceiling fan/ exhaust fan dismantling of blades, transportation to work shop and carrying out for rewinding, transportation to site, reinstallation and testing complete. 50 m&l for rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enameled copper wire of superior quality, same gauge of wire, same nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush, ball bearing where ever required complete all as specified and directed by engineer in charge. 51 all as per ser item no 43 but exhaust fan 230/300 mm sweep 52 all as per ser item no 43but exhaust fan 400 mm sweep 53 s&f ceiling fan ball bearing of suitable size & model (as per sample). make: nbc/ skf 54 m&l for replacing u clamps withrubber reel,bolts, nuts, washers and safety pin ceiling fan of any size/ make complete all as specified and directed 55 m & l for down rod of 1 height fabricated out of ms pipe 12mm dia heavy duty duly painted with one coat ofwhite paint complete all as specified and directed. 56 s &f ofcanopy of celing fans of 1200/1400mm swipe sizeheavy duty duly painted with one coat ofwhite paint complete all as specified and directed. 57 m&l for spray painting (white colour) with synthetic enamel paint to ceiling fans/exahust fan of anycapacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking mes no with black paint complete all as specified and directed by engineer in charge. 58 taking down carefully geysers 25/50 ltr capacity, opening for inspection, , cleaning, descaling, reassembling and refixing in position after carrying out repairs like soldering/ brazing etc including replacement of pressed rubber gasket, nuts, bolts, neon indicator lamp 1 amp etc.note u/s items to be paid sepretely under relivent items. 59 m&l for spray painting (white colour) with synthetic enamel paint to geysers 25/50 liters capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking mes no with black paint complete all as specified and directed by engineer in charge. 60 m & l heating element of 2.0 kw (circular) as required at site including rubber washers (isi marked) etc complete all as specified and directed (as per sample). 61 m & l heating element of 2.0 kw (rectangle) as required at site including rubber washers (isi marked) etc complete all as specified and directed make venus or as per sample. 62 s&f of storage tank made out of copper sheet of appropriate thickness and confirming to is 208 (1974) for 50 litre capacity geysers with collar complete duly tested at required pressure as per it i of 1986 of steel storage tank complete all as specified and directed. 63 s&f of storage tank made out of copper sheet of appropriate thickness and confirming to is 208 (1974) for 25 litre capacity geysers with collar complete duly tested at required pressure as per it i of 1986 of steel storage tank complete all as specified and directed. 64 m&l for replacement of insulating material (glass wool) for 25/ 50 litre capacity geysers complete all as specified anddirected by engineer in charge. 65 s&f base plate assembly 20 swg heavy duty suitable for 50 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site complete all as specified and directed (as per sample). 66 s&f base plate assembly 20 swg heavy duty suitable for 25 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site complete all as specified and directed (as per sample). 67 m&l chromium plated copper connection pipe 600mm long with two brass adopters washers and connecting up complete all as specified and directed. 68 m&l pvc connection pipe 450mm long with two brass adopters washers and connecting up complete isi mark all as specified and directed by engr in charge 69 m&l in replacement safety nut for high pressure releasecomplete all as specified and directed (as per sample). 70 s&f in replacement non return valves 15mm dia and connecting up complete all as specified and directed (isi marked).as per sample 71 m&l in replacement top cover for geysers of 25/50 ltrs capacity any make as required at site duly painted with two coats of synthetic enamel spray paint (first quality) complete all as specified and directed. 72 s&f in replacement bottom cover for geysers of 25/50 ltr any make required at site duly painted with synthetic enamel spray paint (first quality) with inspection plate in two pieces complete all as specified and directed. 73 s&f in replacement of outer cover for geyser made out of ms sheet suitable for 50 ltrs capacity geyser vertical/horigontal type complete all as specified and directed. 74 s&f in replacement of outer cover for geyser made out of ms sheet suitable for 25 ltrs capacity geyser vertical/horigontal type complete all as specified and directed. 75 s&f in replacement thermostat (isi marked) for 25/50 liters capacity geyser complete all as specified and directed. make : daspass/theeta/tte 76 s&f in replacement indicator lamp (red & green) 230 volts suitable for geyser complete all as specified and directed (as per sample) 77 supply and fixin replacementmild steel hole fastner 10mm dia, 100mm long including nut and washer complete all as specified and directed. 78 supply and fix in replacement gun metal gate valve 15 mm bore, isi marked with iron wheel head, screwed both ends for gi pipe complete all as specified and directed. make : upadhyay/ leader/ zoloto 79 s&f in replacement 9 watt led bulb suitable for thread type holder/ b 22 type holder complete all as specified and directed by engineer in charge. 80 s&f in replacement 15 watt led bulb suitable for thread type holder/ b 22 type holder complete all as specified and directed by engineer in charge. 81 s&f in replacement celing fan blade suitable for 1200mm sweep as per site requirmentcomplete all as specified and directed by engineer in charge. 82 s&f in replacement exhuast fan blade suitable for300mm/450mm sweep as per site requirmentcomplete all as specified and directed by engineer in charge. 83 supply&fixing in replacementlight freedom bldg security lightcompressing pressure, die cast housing for better aesthetics and thermal management. comprises of extruded aluminium housing with pre wired gear tray with led’s & drive, heat resistant flat glass suitable gasketed for ip65 protection, high grade power coating and fitted with toughened glass with high power led’s of 40 watt and pipe mounting arrangement for end mounting on bracket made out of 50mm dia gi pipe light grade, 1.2m long bent to shape with two sets of clamps made out of flat iron 50 x 6mm, bolts, nuts and washers and applying two coats of aluminium paint over on coat of red oxide zinc chrome primer connecting electrically with pvc mulitistranded copper cable of suitable size complete including taking down existing 40 watt sv/mh lamp fittings all as specified and directed make cg freedom+ cat pt no lsts 40 cdl oeuivalent to havells,phillps. 84 supply&fixing in replacement light freedom bldg security lightcompressing pressure, die cast housing for better aesthetics and thermal management. comprises of extruded aluminium housing with pre wired gear tray with led’s & drive, heat resistant flat glass suitable gasketed for ip65 protection, high grade power coating and fitted with toughened glass with high power led’s of 30 watt and pipe mounting arrangement for end mounting on bracket made out of 50mm dia gi pipe light grade, 1.2m long bent to shape with two sets of clamps made out of flat iron 50 x 6mm, bolts, nuts and washers and applying two coats of aluminium paint over on coat of red oxide zinc chrome primer connecting electrically with pvc mulitistranded copper cable of suitable size complete including taking down existing 30 watt sv/mh lamp fittings all as specified and directed make cg freedom+ cat pt no lsts 00 cdl oeuivalent to havells,phillps. 85 supply and fixing led light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 v ac decorative type with driver holder and led lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 86 s& f in replacementmccb db vtpnvertical load line4 way double doorip 54 ik 09 cat no507750 makelegrand orequivalent or equivelent make of l & tor c&s complete all as specified and directed. 87 supply and fixing in replacement mccb, 4 pole, 415 volt of capacity 63amp, breaking capacity25 ka , icu=100% ics thermal magnetic type adjustable type80 to 100 % confirming to iec 60947 ii, is 13947 ii , including thimbles, nuts, bolts ,washers etc and connections, etc. complete all as specifiedand directed by engr in charge make :legrands/schnieder/l&tcat part no 420053 88 m & l in replacement for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected togalvanised iron strip 25x4mm as earthinglead lead by means of gi bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate no 3 of ssr pt i incl rcc cover and ms angle iron frame, watering arrangement with gi pipe 20 mm dia and ms funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified and directed (note: gi earth streep 7.5m will be measured and paid separately) 89 m & l in replacementfor fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in gi pipe with 25x4mm galvanised iron wire complete all as specified and directed. 90 supply and fixing led lights fitting 1x 22w, 220v, ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by engineer in charge.product code lcclb24 cdl of crompton cute lineaor eqivalent inmake : havells/phillips 91 s & finverter led tube light batten of5700k to 6500k , 10w ,rated voltage 230 v ac 50 hz having high power high brightness lm 80 certified led with pc /aluminium extrusion milky diffuser front cover ,lumen maintenance of 50000 hours @ l70li ion bis certified battery of 3.7v 10w at battery operation ,back up will be 3 4 hrs, protection will be ip 20,overcharging ,deep discharging ,thermal compensation, marked with standard is 10322,lm79 complete all as specified and directed. 92 s & f in replacementled tube light batten of5700k to 6500k , 18w ,rated voltage 230 v ac 50 hz having high power high brightness lm 80 certified led with pc /aluminium extrusion milky diffuser front cover ,lumen maintenance of 50000 hours @ l70li ion bis certified battery of 3.7v 10w at battery operation ,back up will be 3 4 hrs, protection will be ip 20,overcharging ,deep discharging ,thermal compensation, marked with standard is 10322,lm79 complete all as specified.cat part no lctl18 cdl or equivalent in phillips/havells 93 s&f aesthetically designed surface mounted circular shaped decorative wall/ceiling led light of 12 wfixture with opal diffuser to give glare free light including suitable led lamp of 12 w having dimenstion dia of 300mm. and height 92 mm complete all as specified and directedmake:cg cat no lcsr 12 cdl or equalivalentof phillips/havells 94 s&f bronze coloured floral brown glass metal aesthetically designed wall mounteddecorative wallled light of8/9 wfixture with opal diffuser to give glare free light including suitable led inverter lamp of 8/9 w having lamp base e27/b22 (colour natural white/cool day/warm white).make:philips cat no 37934/06 or equalivalentof cg/halonix 95 taking down mccb any type removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc complete all as specified and directed. 96 supply and fix wall mounted indoor type factory made load line db s double door made out of crca mild steel sheet with insulating material like polyester powder coated surface mounted 12 way vtpn 415 volts ip 43 protection with suitable bus bar neutral link and earth link suitable for 4 pole mccb of 250 a (with display electronic release microprocessor based having short circuit and overload protection) 36ka as incomer & mcb sp 40 a 6 nos and 63 a 6 nos as outgoing complete all as specified and directed.note: the rate of mccb and mcb should be included in the quoted rate. 97 s&f rigid non metallic pvc conduit medium grade 20 mm dia for telephone cable complete with all fixing accessories all as specified. make: kalinga/supreme/finolex 98 s&f aesthetically designed wall mounteddecorative bedlightled light of4 wfixture with opal diffuser to give glare free light including suitable led lamp of 4 w having lamp base e27 complete all as specified and directed.make:philips cat no 56240/31 or equalivalentof cg/havells 99 s&f of inverter security light fitting 60w with alluminium pdc top maintanable clear toughfened glass suitable high efficient secoundery lence lm80cerfied ledwith 50000 hr @ l70 along with isolated electronic cc driver rtc enable with insulated copper wire covered with ss & ms zing plated and passivated.the light should be ip66 ingress protection and ik05 impact resistanceli ion bis certified battery of 3.7v 10w at battery operation ,back up will be 3 4 hrs, protection will be ip 20,overcharging ,deep discharging ,thermal compensation, marked with standard is 10322,lm79 complete all as specified. 100 supply and fixing led luminaire 600 mm x 600 mm, 35/36 watt, 220 v ac recessed type with high efficiency pmma diffuser soft glare free light complete with driver, holders & led lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.make:cg cat no lctlsn 36 cdl or equalivalentof philips/havells 101 supply and fixing modular double usbcharger 2 module 2400 ma confirming to is 13252(part 1) complete all as specified and directed ...

Due Date : May 08, 2023

Tender Value : ₹ Ref. Documents

View Tender
33
Military Engineer Services - Delhi

37189756 repair / maintenance of ceiling fan, geyser with connected items at certain building of sp marg md offrs accn and certain e / m fittings / fixtures and internal wirings at certain buildings oftpt unit ihq ( army ) asc under ge new delhi 1 taking down of ceiling fan / exhaust fan dismantling of blades, transportation to workshop and carrying out from sp marg to civil work shopfor rewinding, returntransportation to site, complete all as specified and directed. 2 m&l for rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enameled copper wire of superior quality, same gauge of wire, same nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush, ball bearing wherever required complete all as specified and directed. 3 all as per ser item no 2.00 here in before but exhaust fan 230 / 300 mm sweep complete all as specified and directed. 4 s&f ceiling fan ball bearing of suitable size & model ( as per sample ) complete all as specified and directed. 5 m&l for replacing u clamps withrubber reel, bolts, nuts, washers and safety pin ceiling fan of any size complete all as specified and directed. 6 m&l for down rod of 1 height fabricated out of ms pipe 12mm dia heavy duty duly painted with one coat ofwhite synthetic enamel paint complete all as specified and directed. 7 supply and fix in replacement fan capacitor of the following capacity : 8 1.5 mfd 9 2.5 mfd 10 3.15 mfd 11 s&f ofcanopy of ceiling fans of 1200 / 1400 / 1600 mm swipe sizeheavy duty duly painted with one coat ofwhite synthetic enamel paint complete all as specified and directed. 12 m&l for spray painting ( white colour ) with synthetic enamel paint to ceiling fans / exhaust fan of anycapacity to reach upto satisfied finish of painting after cleaning and preparation of surfacewith black synthetic enamel paint complete all as specified and directed. 13 supply & fixing flat ceiling fan blade 1mm thickness suitable for 1200mm sweep ceiling fan, 12 15 degree tilted, having 3 nos in each set complete all as specified and directed. 14 supply & fixing flat exhaust fan blade of 1mm thickness suitable for 230 / 250 / 300mm sweep exhaust fan, 12 15 degree tilted, having 3 no. in each set complete all as specified and directed. 15 s&f frame of 230 / 250 / 300 mm metallic exhaust fan including taking down of old frame complete all as specified and directed. 16 supply & fixing flat ventilation fan blade of pvc, 1mm thickness suitable for 230 / 250 / 300mm sweep exhaust fan, 12 15 degree tilted, having 3 / 4 in each set complete all as specified and directed. 17 s&f ventilation fan motor of size 230 / 250 / 300 including taking down of old ventilation fan motor complete all as specified and directed. 18 s&f pvc frame of 230 / 250 / 300 mm ventilation fan including taking down of old frame complete all as specified and directed. 19 taking down carefully geysers 25 / 50 ltr capacity, opening for inspection, , cleaning, descaling, reassembling and refixing in position after carrying out repairs like soldering / brazing etc including replacement of pressed rubber gasket, nuts, bolts, neon indicator lamp 1 amp etc. complete all as specified and directed. 20 m&l for spray painting ( white colour ) with synthetic enamel paint to geysers 25 / 50 litres capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking mes no with black paint complete all as specified and directed. 21 m&l for heating element of 2.0 kw ( circular ) as required at site including rubber washers ( isi marked ) etc complete all as specified and directed ( as per sample ) . 22 m&l for heating element of 2.0 kw ( triangular ) as required at site including rubber washers ( isi marked ) etc complete all as specified and directed 23 s&f storage tank made out of steel sheet of appropriate thickness and confirming to is 208 ( 1974 ) for 50 litre capacity geysers with collar complete duly tested at required pressure complete all as specified and directed. 24 s&f of storage tank made out of steel sheet of appropriate thickness and confirming to is 208 ( 1974 ) for 25 litre capacity geysers with collar complete duly tested at required pressure complete all as specified and directed. 25 m&l for replacement of insulating material ( glass wool ) for 25 / 50 litre capacity geysers complete all as specified and directed. 26 s&f base plate assembly 20 swg heavy duty suitable for 50 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site ( as per sample ) complete all as specified and directed. 27 s&f base plate assembly 20 swg heavy duty suitable for 25 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site ( as per sample ) complete all as specified and directed. 28 m&l chromium plated copper connection pipe 600 / 1000 mm long with two brass adopters washers and connecting up complete all as specified and directed. 29 m&l safety nut for high pressure release complete all as specified and directed ( as per sample ) . 30 s&f top cover for geysers of 25 / 50 ltrs capacity of any make as required at site duly painted with two coats of synthetic enamel spray paint ( first quality ) complete all as specified and directed. 31 s&f bottom cover for geysers of 25 / 50 ltr any make required at site duly painted with synthetic enamel spray paint ( first quality ) with inspection plate in two pieces complete all as specified and directed. 32 s&f outer cover for geyser made out of ms sheet suitable for 50 ltrs capacity geyser vertical / horizontal type complete all as specified and directed. 33 s&f of outer cover for geyser made out of ms sheet suitable for 25 ltrs capacity geyser vertical / horizontal type complete all as specified and directed. 34 s&f thermostat ( isi marked ) for 25 / 50 litres capacity geyser complete all as specified and directed. 35 s&f indicator lamp ( red & green ) 230 volts suitable for geyser ( as per sample ) complete all as specified and directed. 36 supply and fix mild steel hole fastener 10mm dia, 100mm long including nut and washer complete all as specified and directed. 37 supply only mcb sp 10 ka, 230 volts 6 32 amps capacity complete all as specified and directed. 38 supply only mcb spn 10 ka, 230 volts 40 63amps capacity complete all as specified and directed. 39 supply only mcb tpn 415 volts 100 amps capacity complete all as specified and directed. 40 m&l for submain wiring with pvc insulated unsheathed copper conductor multi stranded frls type 1100v grade 2 x 2.5 sqmm completedrawn in new pvc concealed conduitand its accessories along with 1x 2.5 sqmm pvc insulated unsheathed copper conductor multi strandedfrls type cable for continuous earth wire and duly connected to common earth dollyall as specified and directed. 41 m&l for taking down ceiling fan & taking out old unsv ceiling fan motor& replacement with new copper winding motor with head cover by fixing nut bolts complete with accessories 230 volts 1200 mm sweep, 300 rpm with air delivery 255 / 265 cum / min including making arrangement to hanging of fan to ceiling with proper hook nut bolts with approved make all as specified & directed all as specified and as directed by engr in charge. 42 taking down copper / aluminium point wiring ( light, fan, socket or power ) complete, including fixture and fittings suchasswitches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.. 43 m&l for point wiringwith pvc frlsinsulated unsheathed multi strandedcopper conductorof size 1.5 sqmm 1100 v grade including one run of pvc insulated unsheathed multi strandedcopper conductorof size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in existing conduits andits accessories, including replacement of factory made steel boxes suitable for modular switch, sockets or piano type switch socket, including modular plates or hylum sheetof suitable size as per site requirementfor the followingnote: cutting & chasing, if required, shall be measured / paid under relevant items. 44 one light / ceiling fan / exhaust fan point controlled by one number, one way switch 5 / 6 amps complete all as specified and directed. 45 one lightpoint controlled by two numbers, two way switch 5 / 6 amp complete all as specified and directed. 46 one bell / buzzer point controlled by one bell push complete all as specified and directed. 47 one 3 pin 5 amps socket outlet point controlled by one way switch on independent boardcomplete all as specified and directed. 48 one 3 pin 5 amps socket outlet point controlled by one way switch on same board complete all as specified and directed. 49 all as per item no 2.00 here in before but point wiring with 2.5 sqmm single core copper cable and earth continuity wire with 2.5 sqmm single core cable for one three pin 15 amp socket outlet point on independent board complete all as specified and directed. 50 all as per item no 2.00 here in before but point wiring with 1.5 sqmm single core coppercable and earth continuity wire with 1.5 sqmm single core cable on 5amp socket point independent circuitbut below the switch board of light points in the same vertical plane, as specified and directed by engineer incharge 51 s&f modular switch 6 amps 250 v ac one way with isi mark including 6 amps switch frame complete all as specified and directed. 52 s&f modular switch 6 amps 250 v ac two way with isi mark including 6 amps switch frame complete all as specified and directed. 53 s&f modular switch 16 a sp one way 240 volts complete all as specified and directed. 54 s&f modular socket 6 a multi socket for 2 / 3 pin 240 volts complete all as specified and directed. 55 s&f modular bell push 6 awith neon 1 module 240 volts complete all as specified and directed. 56 s&f modular socket 15 a multi socket for 2 / 3 pin 240 volts complete all as specified and directed. 57 s&f switch piano flush button single pole one way 6 amps complete all as specified and directed. 58 s&f switch piano flush type 15 amps single pole one way complete all as specified and directed. 59 s&f socket outlet5 / 6 amps 2 in 1, 3 pin flush type complete all as specified and directed. 60 s&f socket outlet 2 in 1, 3 pin 5 and 15 amp, flush type complete all as specified and directed. 61 s&f switch piano flush button single pole two way 6 / 15 amps complete all as specified and directed. 62 s&f bell push, flush type 5 a240 volts complete all as specified and directed. 63 s&f electric bell ding dong ac 230 volt complete all as specified and directed. 64 taking down db of spn 8 / 12 way type removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and making good disturbed surfaces of walls etc. complete all as specified and directed. 65 s&f sheet metal enclosures for dbs when mcb to be used, spn double door 240 volt, 12 way with 200 amps rated busbar complete all as specified and directed. 66 s&f sheet metal enclosures for dbs when mcb to be used, spn double door 240 volt, 8 way with 200 amps rated busbar complete all as specified and directed. 67 taking down mcb 6 32 / 40 63 amps sp / spn and 40 63 amps tpn type removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and making good disturbed surfaces of walls etc. complete all as specified and directed. 68 s&f in replacement ofmcb spn 40 to 63 amp 240 volt rupture capacity 10 ka, series c complete all as specified and directed. 69 s&f in replacement ofmcb spn 6 to 32 amp 240 volt rupture capacity 10 ka, series c complete all as specified and directed. 70 s&f mcb sp 6 amp to 32 amp240 volts rupture capacity 10 ka, series c complete all as specified and directed. 71 taking downmetal clad enclosure with plug and socket 10 / 20amps removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and making good disturbed surfaces of walls etc. complete all as specified and directed. 72 s&f sheet metal enclosure with plug and socket 10 amp 240 volts with one mcb single pole, complete all as specified and directed. 73 s&f sheet metal enclosure with plug and socket 20 amp 240 volts with one mcb single pole complete all as specified and directed. 74 s&f in replacementled batten of 20 watt230volt ( size 4 ft ) , box type complete with led tube light 18 watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed. 75 s&f in replacement of endura linear led batten of 10 w ( 2 ft. ) , extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver inac complete all as specified and directed. 76 s&f inrepairaesthetically designed wall mounteddecorative wallled light of16 wfixture with opal diffuser to give glare free light including material of body floral blown glass metal , suitable led lamp of 2x8 w havingcomplete all as specified and directed. 77 supply & fix in in replacement aesthetically designed wall mounteddecorative mirrorled light of3.6 wfixture with opal diffuser to give glare free light including suitable led lamp of 3.6 w having lamp base e27 complete all as specified and directed. 78 s&f in replacement of cast aluminium housing, powder coated led bulkheads light fitting 10watts with frosted diffuser complete with suitable driver complete all as specified and directed. 79 supply and fixin replacement metal clad plug top of capacity 20 amp, 240 volts complete all as specified and directed. 80 supply and fix in replacement metal clad socket of capacity 20 amp, 240 volts complete all as specified and directed. 81 supply and fix in replacementdecorative laminated sheet 3mm thick of size 8 x 12 including necessary cutting of sheet for fixing switch / socket complete all as specified and directed. 82 supply and fixin replacement decorative laminated sheet 3mm thick of size 8 x 5 including necessary cutting of sheet for fixing switch / socket complete all as specified and directed. 83 supply and fix in replacement only decorative laminated sheet 3mm thick of size 7 x 4 including necessary cutting of sheet for fixing switch / socket complete all as specified and directed. 84 supply and fix in replacementdecorative laminatedt cover sheet 3mm thick of size 2 / 3 inch dia complete all as specified and directed. 85 s&f in replacement step type electronic fan regulator flush type 230 volts complete all as specified and directed. 86 s&f electronic fan regulator modular type 100 watt step type double modular as per existing complete all as specified and directed. 87 supply only led bulb inverter type, 15 watt, suitable for fitting in pendant holder complete all as specified and directed. 88 supply onlypvc gang boxwith cover plate 2 / 3 module suitable for fitting one 5 a switch / socket complete all as specified and directed. 89 supply only pvc gang box with coverfour module suitable for fitting one15a switch and one socket complete all as specified and directed. 90 supply only pvc gang box with cover6 module suitable for fitting switch and socket complete all as specified and directed. 91 supply only frls pvc insulated unsheathed single core stranded copperconductor cableof size 1.5 sqmm 1100 volt grade complete all as specified and directed. 92 supply only frls pvc insulated unsheathed single core stranded copperconductor cableof size 2.5 sqmm 1100 volt grade complete all as specified and directed. 93 supply only frls pvc insulated unsheathed single core stranded copperconductor cableof size 4.0 sqmm1100 volt grade complete all as specified and directed. 94 supply only frls pvc insulated unsheathed single core stranded copperconductor cableof size 6.0 sqmm1100 volt grade complete all as specified and directed. 95 supply only frls pvc insulated unsheathed single core stranded copperconductor cableof size 10 sqmm1100 volt grade complete all as specified and directed. 96 supply onlystranded coper cable ( thimbal ) lugx of size 10.0 sqmm complete all as specified and directed.. 97 supply onlystranded coper cable ( thimbal ) lugx of size 6.0 sqmm complete all as specified and directed. 98 supply only modular switch 6 amps 250 v ac one way with isi mark complete all as specified and directed. 99 supply only modular switch 16 a sp one way 240 volts complete all as specified and directed. 100 supply only modular socket 6 a multi socket for 2 / 3 pin 240 volts complete all as specified and directed. 101 supply only modular socket 15 a multi socket for 2 / 3 pin 240 volts complete all as specified and directed. 102 m&l inreplacement building security led 18 watt fitting complete with accessories made of aluminium housing having minimum system efficiency 100 lm / watt operating at full load at ac supply including house service bracket complete all as specified and directed. 103 s & f supply and fixing led luminaire 600 mm x 600 mm, 35 / 36 watt, 220 v ac recessed type with high efficiency pmma diffuser soft glare free light complete with driver, holders & led lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed with approved make 104 supply & fix in replacement1x4 panel light surface mountedled light of36 wfixture with opal diffuser to give glare free light including suitable led light of 36 w complete all as specified and as directed. 105 supply and fix rigid non metallic pvc conduit 20 mm dia including of boxes ( junction / terminal ) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for lan / telephone circuits. note : work includes cutting of chases on wall and making good disturbed surfaces complete all as specified and directed....

Due Date : May 08, 2023

Tender Value : ₹ Ref. Documents

View Tender
34
Municipal Corporation - Delhi

36930860 supply of material for day to day maintenance and repair of electric installations in various mpl building in ward no. 39 s chhawla under najafgarh zone. 1 supply of 1.5 sq. mm isi marked, fr pvc insulated, single core copper conductor cable 2 supply of 2.5 sq. mm isi marked, fr pvc insulated, single core copper conductor cable 3 supply of 4.0 sq. mm isi marked, fr pvc insulated, single core copper conductor cable 4 rewiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm frls pvc insulated copper conductor single core cable as earth wire in existing surface / recessed steel / pvc conduit including dismantling as required.group c 5 supply of 10 sq. mm isi marked, frls pvc insulated, single core copper conductor cable 6 supply of s.p. 15 / 16 amps, one way switch, piano type isi marked 7 supply of 3 pin 5 / 6 amps socket outlet, piano type isi marked 8 supply of 6 pin 15 / 16 & 5 / 6 amps socket outlet, piano type isi marked 9 supply of 6 amps. to 32 amps. ratings , sp mcb, “c” curve, 10 ka breaking capacity 10 supply of 40 amps., 2 pole isolator 11 supply of 3 mm thick phenolic laminated sheet 12 supply of xlpe insulated and pvc sheathed al conductor un armoured cable confirming to is: 7098 of following size. 2x6 sqmm 13 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm 14 supply of led tube type luminaire 20 watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient leds with the following ( a ) total system wattage 20 watt + / 5% ( b ) luminous efficacy lumens / watt>=95 ( c ) power factor >=0.95 15 supply of 1200mm sweep 50 watt, energy saver isi marked bee 5 star ratingac ceiling fan suitabble for 230 v, 50 hz ac supply without regulator with blades, downroad etc complete as required. 16 supply of 12 ( 300mm ) sweep 1400 rpm exhaust fan heavy duty complete with shutters blades etc as reqd...

Due Date : March 28, 2023

Tender Value : ₹ 99619.0

View Tender
35
Department of Higher Education - Delhi

36818281 bids are invited for supplying and fixing of 3 x 2.5 sq. m.m single core cable in existing surface , supplying and fixing of 3 x 4 sq. m.m single core cable in existing surface , supplying and fixing of 4 x 10 sq. m.m single core cable in existing surface plus 2 x 6 sq. mm earth wire , supplying and fixing of 32mm steel conduit pipe , supplying and fixing of 25mm medium class pvc conduit , supplying and fixing of dlp plastic trunking without flexible cover of size 105 x 50 mm , supplying and fixing of dlp plastic trunking without flexible cover of size 32 x20mm , supplying and fixing of dlp plastic trunking of size 85mm cover , supply and fixing of 15 a switch in existing 105 x 50 mm dlp trunking , supply and fixing of 6 pin 15by16 amp socket outlet in existing 105 x 50 mm dlp trunking , suppply and fixing of 6 module base and cover plate for 105 x 50mm dlp trunking , supply and fixing of 4 way double door, 415v, tpn mcb , supply and fixing of 12 way double door, 415v, tpn mcb , supply and fixing of single pole mcb , supplying and making end termination with brass compression gland of size 3.5 x 95 sq. mm , supplying and making end termination with brass compression gland of size 4 x 16 sq. mm , providing and fixing of 125a, 36ka, fpmccb , providing and fixing of tpn sheet , supply and fixing of 63a tp mcb 415v...

Due Date : March 27, 2023

Tender Value : ₹ Ref. Documents

View Tender
36
Department Of Ayush - Delhi

36723116 bids are invited for custom bid for services repair & maintenance of furniture items 1 computer table a) replacement of lock b) adjustment of drawer c) minor repair of table d) providing of key e) opening of drawer f) replacement of handle 4” g) providing of key board tray h) p/fixing of nova pan top 18mm with rubber beeding i) p/fixing of key board channel 2 steel almirah a) replacement of lock b) replacement of handle c) repair of locking system d.) providing of keys e.) opening of alimirah f.) repair of lock g.) p/fixing of new locking system h.) p/fixing of bush i.) p/fixing of legs for almirah j.) painting of steel almirah ( big ) outside k.) painting of steel almirah ( big ) both side l.) painting of steel almirah ( small ) out side m.) painting of steel almirah ( small) both side 3 steel filing cabinet a) replacement of lock b) replacement of handle c) providing of key d) opening of filing cabinet e) repair of lock f) painting of steel almirah ( big ) outside g) painting of steel almirah ( big ) both side h) painting of steel almirah ( small ) out side i) painting of steel almirah ( small) both side 4 steel revolving chair a) repair of revolving chair b) overhauling axle of chair c) replacement of wheel ( isi ) mark d) overhauling & greasing of all parts of chair e) replacement of spring ( big ) f) p/fixing of steel base g) p/fixing of pu plastic arms h) p/fixing of plastic base . i) p/fixing of synchro base (branded ) j) replacement of hydraulic cylinder 5 steel book case a) p/fixing of lock b) p/ fixings of handle c) providing of key d) opening of book case e) repair of lock f) repair of locking system 6 door lock a) p/fixing of door lock with both side handles complete ( branded ) b) repair of old lock c) replacement of door lock ( branded ) d) replacement of brass handle e) replacement of door handle ( branded ) f) opening of locked door g) p/fixing of door stopper i. aluminium ii. brass h) repairing of door i) p/fixing of new hinges 4” ss finish j) p/fixing of link lock ( sliding bolt ) k) p/fixing of tower bolt ( alu ) i) 6” l) ii) 8” m) p/fixing of tower bolt ( iron ) a) 6” b) 8” n) p/fixing of godrej cylindrical lock o) p/fixing of aldrej ( brass ) p) p/fixing of aldrej ( powder coated ) q) p/fixing of aldrej ( alum) r) p/fixing of new door closer ( godrej ) s) fixing of door closer t) repair of door closer u) p/fixing of spring v) p/fixing of small rod w) p/fixing of big rod x) supply and fixing of new mortise pad lock with three key 60mm y) supply / fixing of new mortise pad lock with 80mm z) supply / fixing of new handles of mortise aa) removing of mortise lock bb) repair of mortise lock including of oiling & greasing cc) supply / fixing of secret lock with three keys ( godrej make ) dd) opening of secret lock ee) removing of secret lock ff) refixing of secret lock gg) repair of secret lock in all respect including replacement of lever , spring , buttoin etc. hh) supply of duplicate keys ii) supply / fixing of new iron chitkani 4” jj) supply / fixing of new iron chitkani – 6” kk) supply / fixing of new iron chitkani 9” ll.) supply / fixing of new aluminium chitkani size : 4” mm) supply & fixing of new aluminium chitkani of size : 6” nn) supply / fixing of new aluminium chitkani of size : 9” oo) repair / fixing of chitkani pp) supply / fixing of new iron sliding bolt 12” qq) supply / fixing of new iron sliding bolt 10” rr) removing of sliding bolt ss) refixing of sliding bolt 7 wooden table: a) minor repair of wooden table b) major repair of wooden table with wood c) p/fixing of key board channel to wooden table d) repair of drawer of wooden table e) p/fixing of multipurpose lock ( harrison ) f) replacement of handle – 4” g) replacement of handle – 6” h) p/fixing of legs to wooden table i) p/fixing of lock to wooden table j) p/fixing of knob / handle ( brass ) k) p/fixing of knob / handles ( ord ) l) p/fixing of fm lock m) p/fixing of new drawer to wooden table n) p/fixing of ply table drawer 8. modular furniture a) p/fixing of modular pedestal unit // three drawer unit b) dismantling of modular partition including removing of all garbage like wood , board , ply , sunmica etc. from the site . c) refixing of modular partition d) labour charges of removing of garbage from the site ( per day ) e) repair of modular table f) p/fixing of fm lock g) replacement of lock h) repair of lock h) opening of drawer of modular table i) p/fixing of key board channel of modular table 9 modular pedestal unit / drawer a) repair of drawer unit b) p/fixing of fm lock c) replacement of lock d) repair of lock e) opening of drawer of modular table f) p/fixing of key board channel to drawer unit 10 repair of aluminium doors / window a) p/fixing of new lock ( branded ) b) p/fixing of new handle ( branded ) c) major repair of door including cutting , dismantling and refixing of etc. complete in all respect . d) repair of locking system e) p/fixing of rubber beeding f) p/fixing of aluminium section as per size required . g) p/fixing of hinges ( ss ) 4” h) p/fixing of floor machine ( isi ) i) p/fixing of glass panes a) glass ( plain ) b) glass ( tinted ) j) p/fixing of aluminium beding k) p/fixing of pivot set 11 supply of wooden notice board / key board / pin up board made of 19mm thick commercial board ,1st class teak wood frame , blazer cloth , cover on 12mm thick soft cellotex duly fine lacquer polished .( per sft) 12 supply & installation of white marker board with all necessary accessories ( magnetic ) ( per sqft ). 13 acrylic elevator / writing stand made of acrylic sheet 10mm thick , adjustable height with brass handle ( each ) . 14 polishing work a) officer table / centre table / astt. table etc. b) wooden cushioned office chair c) sofa set a. single seater b. two seater c. three seater d) wooden partition screen e) side rack / cupboard / wooden almirah/ book shelf / card cabinet / display rack / notice board etc. f) painting of partition with plastic paint g) polishing of wooden partition h) spirit polishing of wooden furniture items with putty etc. i) painting of partition with duco paint j) removing of old polishing of wooden furniture with scrapping /rubbing and making smooth surface k) lacquer polishing of wooden furniture items l) painting with synthetic enamel paint with approved brand and shade to wooden partition / wall cupboard racks etc m) painting with plastic emulsion paint including rubbing , filling with altex on wall n) cleaning of aluminium partition with thinner , dhoti etc . o) painting of wall, ceiling , etc. oil bond distempering including rubbing , scrubbing etc. with sand paper for making smooth surface . p) cleaning of wooden partition with thinner, dhoti and other necessary materials q) cleaning of flooring with thinner , spirit etc 15 repair of wooden furniture ( with scre & nails ) a) minor repair of chairs b) major repair of chair c) minor repair of almirah d) major repair of almirah e) minor repair of wooden table f) major repair of wooden table g) minor repair of any other items h) major repair of wooden rack i) p/fixing of 4mm ply ( teak ) j) p/fixing of 6mm ply ( commercial ) k) p/fixing of 8mm ply ( commercial ) l) p/fixing of 12mm ply ( commercial ) m) p/fixing of 19mm ply ( commercial ) n) p/fixing of board 12mm ( commercial ) o) p/fixing of board 18mm ( commercial ) p) p/fixing of board 19mm ( commercial q) p/fixing of pre laminated board ( 18mm ) r) p/fixing of pre laminated board ( 12mm ) s) p/fixing of 19mm board ( teak ) t) p/fixing of kunda chapka ( 3”) u) p/fixing of aluminium sheet v) p/fixing of wooden bracket for keeping hot case w) p/fixing of wooden pieces of suitable pieces for repair work ( per rft) x) p/fixing of wall catcher branded y) p/fixing of wooden beeding / moulding z) p/fixing of 1mm sunmica on wooden furniture items aa) p/fixing of legs to sofa 16 p/fixing of acrylic sheet 8mm 17 supply of wooden stool of standard size : 18x18 18 supply of wooden stool of standard size : 24x24 19 supply of wooden foot rest of standard size : 24x18 20 p/fixing of wooden flooring [ uni floor / equivalent ) 21 p/fixing of vitrified tiles 22 p/fixing of wall tiles 23 p/fixing of false ceiling ( 2”x2” ) with aluminium channels, beading as including all necessary hardware fittings and tolls etc complete . 24 p/fixing of gypsum false ceiling with plaster of paris board , made of aluminium channels grid and finish with one or two white wash coat on ceiling . 25 p/fixing of vertical blinds ( mac/ equivalent ) 26 p/fixing of sun control film on glass window door / partition etc of approved quality and shade . 27 p/fixing of roman blind / roller blind ( branded ) 28 p/fixing of chick blind ( branded ) 29 p/fixing of zebra blind ( branded ) 30 repairing of blinds ( per sqft ) 31 lamination of photo/ pcutres a) lamination of photo pictures ( ord ) b) lamination of photo pictures ( designer ) c) providing & fixing of photo pictures d) fixing of photo frame e) p/fixing of looking glass with teakwood frame f) p/fixing of lamination of photo pictures ( ord ) 32 p/fixing of telescopic channel( branded ) b. size : 14” c. size : 16 d. size : 18” 33 supply of glass ( plain ) ( per sft ) a. 6mm thick b. 8mm thick c. 10mm thick d. 12mm thick 34 supply of brown glass ( per sqft ) a. 6mm thick b. 8mm thick c. 10mm thick d. 12mm thick e. bevelling charges f. providing & fixing of rubber beeding g. glass cutting charges h. making of hole in glass h. providing & fixing of aluminium beeding 35 change of upholstery of sofa / chairs, including providing of tat , cotton , jute , markin , dori , casement bostic , nail , thread , spring and labour charges . a. four seater b. three seater c. two seater d. single seater e. wooden cushioned office chairs f. executive high back revolving chair with piping heavy design . g. medium back revolving chair h. high back revolving chair i. workstation revolving chair j. steel cushioned visitor chair ( fixed ) k. supply of sofa cloth for sofa ( as per sample approved ) l. supply of sofa cloth for chairs ( as per sample approved ) 36 p/fixing of rubber cushions ( isi mark ) a) size : 21x22x4 b) size : 21 x22x2 c) size : 18x18 x2 d) p/fixing of foam sheet 25mm ( hd ) to sofa / chair e) p/fixing of foam sheet 50mm ( hd ) to sofa / chair f) stitching of curtain with pleat & lining ( ord ) g) stitching of i let curtain ( ord ) h) p/fixing of hooks of curtain i) repair of wooden frame of sofa and chair by providing of wood , nail fevicol etc. j) supply of curtain cloth ( as per sample approved ) k) supply of lining of cloth as per sample approved l) p/fixing of new partition made of 2 x2 kailwood frame with both side teak ply / sunmica 37 dry cleaning of furniture items : a) sofa set ( per seat ) b) wooden cushioned office chair c) executive high back revolving chair with piping heavy design . d) medium back revolving chair e) high back revolving chair f) workstation revolving chair g) steel cushioned visitor chair h) vertical blinds ( per sqft ) i) roller blinds ( per sqft) 38 miscellaneosu items : a) dismantling of wooden storage b) refixing of wooden storage c) dismantling of wooden partition d) refixing of wooden partition e) p/fixing of setup box with wooden frame and all necessary hardware fittings . f) p/fixing of setup box with glass and all necessary hardware fittings. g) major repair of aluminium window with all necessary hardware fittings h) writing / numbering with enamel paint of furniture items / office equipments i) p/fixing of aluminium grill 3 j) p/fixing of aluminium grill 2” k) p/fixing of mosquito jali ( iron ) l) complete repair of aluminium door including dismantling and refixing with all necessary hardware fittings etc. complete in all respect m) repair / adjustment of aluminium door n) p/fixing of aluminium section as per size required . o) p/fixing of floor machine ( isi ) p) dismantling of vitrified tiles in floor including disposal of unusable material like concrete, cement , plaster etc from site q) labour charges ( per day ) r) fixing of exhaust fan with wood , screw , nut bolt etc 39 miscellaneous civil work a) providing materials & erection of full brick wall with common burnt clay fps ( non modular ) bricks with cement mortar ( 1 cement : 6 coarse sand ) b) providing materials & erection of half brick wall with common burnt clay fps ( non modular) bricks with cement mortar ( 1 cement : 3 coarse sand ) c) providing materials and applying 12mm thick cement plastering in fine sand on walls etc. ( 1 cement : 4 fine sand ) 40 plumbing work a) p/fixing of waste pipe (branded ) b) p/fixing of cp jali c) p/fixing of wc seat with tank ( branded / equivalent ) d) p/fixing of wc seat without tank ( branded / equivalent ) e) p/fixing of wc seat cover ( branded / equivalent ) f) p/fixing of wc sistan tank ( branded / equivalent ) g) p/fixing of wc sistan ball ( branded / equivalent ) h) p/fixing of wash basin ( branded / equivalent ) i) p/fixing of urinal pot ( branded / equivalent ) j) p/fixing of gate wall ( ½” ) ( branded / equivalent ) k) p/fixing of gate wall (¾”) ( branded / equivalent ) l) p/fixing of gate wall (1” ) ( branded / equivalent ) m) p/fixing of gate wall (2”) ( branded / equivalent ) n) p/fixing of pvc connection 18” ( branded / equivalent ) o) p/fixing of pvc connection 24” ( branded / equivalent ) p) p/fixing of pvc connection 30” ( branded / equivalent ) q) p/fixing of bf wash basin round regular 18” ( branded / equivalent ) r) p/fixing of washbasin regular 18” ( branded / equivalent ) s) p/fixing of mixture tap ( branded / equivalent ) t) p/fixing of angle walve ( branded / equivalent ) u) p/fixing of bottle trap ( branded / equivalent ) v) p/fixing of soap dish ( branded / equivalent ) w) p/fixing of towel rod ( branded / equivalent ) x) p/fixing of towel rod bracket ( branded / equivalent ) y) p/fixing of wall mounted wc ( branded / equivalent ) z) p/fixing of floor mounted wc( branded / equivalent ) aa) p/fixing of liquid soap dispenser( branded / equivalent ) bb) p/fixing of jali steel 4” ( branded / equivalent ) cc) p/fixing of flush walve ( big size ) ( branded / equivalent ) dd) p/fixing of flush walve (small size) ( branded / equivalent ) ee) p/fixing of seat cover ( branded / equivalent ) ff) p/fixing of urinal pot ( large ) ( branded / equivalent ) gg) p/fixing of paper holder ( branded / equivalent ) hh) p/fixing of jet spray ( branded / equivalent ) ii) p/fixing of pillar cock ( big size ) jj) p/fixing of pillar cock ( small size ) kk) p/fixing of pvc pipe – 1” ( branded ) ll) p/fixing of pvc pipe 2” ( branded ) mm) p/fixing of pvc pipe 4” ( branded ) nn) p/fixing of pvc pipe 6” ( branded ) 41 electric work a) supply & fixing of electric points with wires 1.5mm,2mm,2.5mm,4mm pvc pipe (1”) , switches , sockets, plates , screws etc b) supply of net connection wiring by using standard cables, ( cat 6, d link ) pvc bo , io box , phase plate and labour charges . c) supply & fixing of phone point wiring ( wire 5mm – finloex ) pvc pipe – 1” io box ( d link ) phase plate ( dlink ) for workstation . d) supply & fixing of 3pin socket with shutter 2mm ( 16a 240v ac ( 6 pin ) e) supply & fixing of switch with indicator 1m 1way 16a x240v ac f) supply & fixing of 3 module plate with cover frame g) supply &fixing of 3module surface mounted pvc gangue box h) supply , fixing of copper pvc cable 250/440 volt grade of size 4mm i) supply & fixing of cu earth wire single stand size 1.5mm j) supply , fixing of pvc flexible conduit size 1” k) supply , fixing of 2/3 pin socket with shutter 2m 6a 240 v a c ( 5 pin ) l) supply & fixing of switch with indicator 1m – 1 way 6a x 240 v ac m) supply & fixing of 8 module horizontal plate with cover frame n) supply & fixing of 8 module surface mounted pvc gangue box o) switch 1m 1way 6a x240 v ac p) supply & fixing of pvc box along with modular base & cover plate for modular switches in recess etc as required 8 module q) p/fixing of 2x2 36 w led panel light ( philips / havells / wipro / equivalent make . r) providing & fixing of led ceiling recessed down light / spot light or any other small light 16 w ( 150mm dia ) philips / havells / wipro or equivalent make . total quantity :...

Due Date : March 20, 2023

Tender Value : ₹ 30 Lakhs

View Tender
37
Department of Financial Services - Delhi

36702872 bids are invited for customized amc / cmc for pre owned products ; ; comprehensive maintenance contract ( cmc ) ; not applicable; no tender for repair and maintenance of furniture and fixture items in the department of financial services, jeewan deep building, sansad marg, new delhi. 1 computer table a) replacement of lock b) adjustment of drawer c) minor repair of table d) providing of key e) opening of drawer f) replacement of handle 4” g) providing of key board tray h) p/fixing of nova pan top 18mm with rubber beeding i) p/fixing of key board channel 2 steel almirah a) replacement of lock b) replacement of handle c) repair of locking system d.) providing of keys e.) opening of alimirah f.) repair of lock g.) p/fixing of new locking system h.) p/fixing of bush i.) p/fixing of legs for almirah j.) painting of steel almirah ( big ) outside k.) painting of steel almirah ( big ) both side l.) painting of steel almirah ( small ) out side m.) painting of steel almirah ( small) both side 3 steel filing cabinet a) replacement of lock b) replacement of handle c) providing of key d) opening of filing cabinet e) repair of lock f) painting of steel filing cabinet ( big ) outside g) painting of steel filing cabinet ( big ) both side h) painting of steel filing cabinet ( small ) out side i) painting of steel filing cabinet ( small) both side 4 steel revolving chair a) repair of revolving chair b) overhauling axle of chair c) replacement of wheel ( isi ) mark d) overhauling & greasing of all parts of chair e) replacement of spring ( big ) f) p/fixing of steel base g) p/fixing of pu plastic arms h) p/fixing of plastic base . i) p/fixing of synchro base (branded ) j) replacement of hydraulic cylinder 5 steel book case a) p/fixing of lock 10 b) p/ fixings of handle c) providing of key d) opening of book case e) repair of lock f) repair of locking system 6 door lock a) p/fixing of door lock with both side handles complete ( branded ) b) repair of old lock c) replacement of door lock ( branded ) d) replacement of brass handle e) replacement of door handle ( branded ) f) opening of locked door g) p/fixing of door stopper i. aluminium ii. brass h) repairing of door i) p/fixing of new hinges 4” ss finish j) p/fixing of link lock ( sliding bolt ) k) p/fixing of tower bolt ( alu ) i) 6” l) ii) 8” m) p/fixing of tower bolt ( iron ) a) 6” b) 8” n) p/fixing of godrej cylindrical lock o) p/fixing of aldrej ( brass ) p) p/fixing of aldrej ( powder coated ) q) p/fixing of aldrej ( alum) r) p/fixing of new door closer ( godrej ) s) fixing of door closer t) repair of door closer u) p/fixing of spring v) p/fixing of small rod w) p/fixing of big rod x) supply and fixing of new mortise pad lock with three key 60mm y) supply / fixing of new mortise pad lock with 80mm z) supply / fixing of new handles of mortise aa) removing of mortise lock bb) repair of mortise lock including of oiling & greasing cc) supply / fixing of secret lock with three keys ( godrej make ) dd) opening of secret lock ee) removing of secret lock ff) refixing of secret lock gg) repair of secret lock in all respect including replacement of lever , spring , buttoin etc. hh) supply of duplicate keys ii) supply / fixing of new iron chitkani 4” jj) supply / fixing of new iron chitkani – 6” kk) supply / fixing of new iron chitkani 9” 11 ll.) supply / fixing of new aluminium chitkani size : 4” mm) supply & fixing of new aluminium chitkani of size : 6” nn) supply / fixing of new aluminium chitkani of size : 9” oo) repair / fixing of chitkani pp) supply / fixing of new iron sliding bolt 12” qq) supply / fixing of new iron sliding bolt 10” rr) removing of sliding bolt ss) refixing of sliding bolt 7 wooden table: a) minor repair of wooden table b) major repair of wooden table with wood c) p/fixing of key board channel to wooden table d) repair of drawer of wooden table e) p/fixing of multipurpose lock ( harrison ) f) replacement of handle – 4” g) replacement of handle – 6” h) p/fixing of legs to wooden table i) p/fixing of lock to wooden table j) p/fixing of knob / handle ( brass ) k) p/fixing of knob / handles ( ord ) l) p/fixing of fm lock m) p/fixing of new drawer to wooden table n) p/fixing of multi lock ( ord ) o) p/fixing of ply table drawer 8. modular furniture a) p/fixing of modular pedestal unit // three drawer unit b) dismantling of modular partition including removing of all garbage like wood , board , ply , sunmica etc. from the site . c) refixing of modular partition d) repair of modular table e) p/fixing of fm lock f) replacement of lock g) repair of lock h) opening of drawer of modular table i) p/fixing of key board channel of modular table 9 modular pedestal unit / drawer a) repair of drawer unit b) p/fixing of fm lock c) replacement of lock d) repair of lock e) opening of drawer of pedestal unit . f) p/fixing of key board channel to drawer unit 10 repair of aluminium doors / window a) p/fixing of new lock ( branded ) b) p/fixing of new handle ( branded ) c) major repair of door including cutting , dismantling and refixing of etc. complete in all respect . d) repair of locking system e) p/fixing of rubber beeding f) p/fixing of aluminium section as per size required . g) p/fixing of hinges ( ss ) 4” h) p/fixing of floor machine ( isi ) 12 i) p/fixing of glass panes a) glass ( plain ) b) glass ( tinted ) j) p/fixing of aluminium beeding k) p/fixing of pivot set 11 supply of wooden notice board / key board / pin up board made of 19mm thick commercial board ,1st class teak wood frame , blazer cloth , cover on 12mm thick soft cellotex duly fine lacquer polished .( per sft) 12 supply & installation of white marker board with all necessary accessories ( magnetic ) ( per sqft ). 13 acrylic elevator / writing stand made of acrylic sheet 10mm thick , adjustable height with brass handle ( each ) . 14 supply of wooden coatstand with brass fittings 15 polishing work a) officer table / centre table / astt. table etc. b) wooden cushioned office chair c) sofa set a. single seater b. two seater c. three seater d) wooden partition screen e) side rack / cupboard / wooden almirah/ book shelf / card cabinet / display rack / notice board etc. f) painting of partition with plastic paint g) polishing of wooden partition h) spirit polishing of wooden furniture items with putty etc. i) painting of partition with duco paint j) removing of old polishing of wooden furniture with scrapping /rubbing and making smooth surface k) lacquer polishing of wooden furniture items l) painting with synthetic enamel paint with approved brand and shade to wooden partition / wall cupboard racks etc m) painting with plastic emulsion paint including rubbing , filling with altex on wall n) cleaning of aluminium partition with thinner , dhoti etc . o) painting of wall, ceiling , etc. oil bond distempering including rubbing , scrubbing etc. with sand paper for making smooth surface . p) cleaning of wooden partition with thinner, dhoti and other necessary materials q) cleaning of flooring with thinner , spirit etc 16 repair of wooden furniture ( with scre & nails ) a) minor repair of chairs b) major repair of chair c) minor repair of almirah d) major repair of almirah e) minor repair of wooden table 13 f) major repair of wooden table g) minor repair of any other items h) major repair of wooden rack i) p/fixing of 4mm ply ( teak ) j) p/fixing of 6mm ply ( commercial ) k) p/fixing of 8mm ply ( commercial ) l) p/fixing of 12mm ply ( commercial ) m) p/fixing of 19mm ply ( commercial ) n) p/fixing of board 12mm ( commercial ) o) p/fixing of board 18mm ( commercial ) p) p/fixing of board 19mm ( commercial q) p/fixing of pre laminated board ( 18mm ) r) p/fixing of pre laminated board ( 12mm ) s) p/fixing of 19mm board ( teak ) t) p/fixing of kunda chapka ( 3”) u) p/fixing of aluminium sheet v) p/fixing of wooden bracket for keeping hot case w) p/fixing of wooden pieces of suitable pieces for repair work ( per rft) x) p/fixing of wall catcher branded y) p/fixing of wooden beeding / moulding z) p/fixing of 1mm sunmica on wooden furniture items aa) p/fixing of legs to sofa 17 p/fixing of acrylic sheet 8mm 18 supply of wooden stool of standard size : 18x18 19 supply of wooden stool of standard size : 24x24 20 supply of wooden foot rest of standard size : 24x18 21 p/fixing of wooden flooring [ uni floor / equivalent ) 22 p/fixing of vitrified tiles 23 p/fixing of wall tiles 24 p/fixing of wall paneling 25 p/fixing of wall paper ( branded ) 26 p/fixing of false ceiling ( 2”x2” ) with aluminium channels, beading as including all necessary hardware fittings and tolls etc complete . 27 p/fixing of gypsum false ceiling with plaster of paris board , made of aluminium channels grid and finish with one or two white wash coat on ceiling . 28 p/fixing of vertical blinds ( mac/ equivalent ) 29 p/fixing of sun control film on glass window door / partition etc of approved quality and shade . 30 p/fixing of roman blind / roller blind ( branded ) 31 p/fixing of chick blind ( branded ) 32 p/fixing of zebra blind ( branded ) 33 repairing of blinds ( per sqft ) 34 lamination of photo/ pcutres a) lamination of photo pictures ( ord ) b) lamination of photo pictures ( designer ) 14 c) providing & fixing of photo pictures d) fixing of photo frame e) p/fixing of looking glass with teakwood frame f) p/fixing of lamination of photo pictures ( ord ) 35 p/fixing of telescopic channel( branded ) a. size : 14” b. size : 16 c. size : 18” 36 supply of glass ( plain ) ( per sft ) a. 6mm thick b. 8mm thick c. 10mm thick d. 12mm thick 37 supply of brown glass ( per sqft ) a. 6mm thick b. 8mm thick c. 10mm thick d. 12mm thick e. bevelling charges f. providing & fixing of rubber beeding g. glass cutting charges h. making of hole in glass i. providing & fixing of aluminium beeding 38 change of upholstery of sofa / chairs, including providing of tat , cotton , jute , markin , dori , casement bostic , nail , thread , spring and labour charges . a. four seater b. three seater c. two seater d. single seater e. wooden cushioned office chairs f. executive high back revolving chair with piping heavy design . g. medium back revolving chair h. high back revolving chair i. workstation revolving chair j. steel cushioned visitor chair ( fixed ) k. supply of cloth for sofa /chairs ( as per sample approved ) 39 p/fixing of rubber cushions ( isi mark ) a) size : 21x22x4 for sofa b) size : 21 x22x2 for chairs c) size : 18x18 x2 for chairs d) p/fixing of foam sheet 25mm ( hd ) to sofa / chair e) p/fixing of foam sheet 50mm ( hd ) to sofa / chair f) stitching of curtain with pleat & lining ( ord ) g) stitching of i let curtain ( ord ) h) p/fixing of hooks of curtain 15 i) repair of wooden frame of sofa and chair by providing of wood , nail fevicol etc. j) supply of curtain cloth ( as per sample approved ) k) supply of lining of cloth as per sample approved 40 p/fixing of new partition made of 2 x2 kailwood frame with both side teak ply / sunmica 41 dry cleaning of furniture items : a) sofa ( per seat ) b) wooden cushioned office chair c) executive high back revolving chair with piping heavy design . d) medium back revolving chair e) high back revolving chair f) workstation revolving chair g) steel cushioned visitor chair h) vertical blinds ( per sqft ) i) roller blinds ( per sqft) 42 miscellaneous items : a) dismantling of wooden storage b) refixing of wooden storage c) dismantling of wooden partition d) p/fixing of setup box with wooden frame and all necessary hardware fittings . e) p/fixing of setup box with glass and all necessary hardware fittings. f) major repair of aluminium window with all necessary hardware fittings g) writing / numbering with enamel paint of furniture items / office equipments h) p/fixing of aluminium grill 3 i) p/fixing of aluminium grill 2” j) p/fixing of mosquito jali ( iron ) k) complete repair of aluminium door including dismantling and refixing with all necessary hardware fittings etc. complete in all respect l) repair / adjustment of aluminium door m) p/fixing of aluminium section as per size required . n) p/fixing of floor machine ( isi ) o) dismantling of vitrified tiles in floor including disposal of unusable material like concrete, cement , plaster etc from site p) labour charges ( per day ) q) fixing of exhaust fan with wood , screw , nut bolt etc 43 miscellaneous civil work a) providing materials & erection of full brick wall with common burnt clay fps ( non modular ) bricks with cement mortar ( 1 cement : 6 coarse sand ) b) providing materials & erection of half brick wall with common burnt clay fps ( non modular) bricks with cement mortar ( 1 cement : 3 coarse sand ) 16 c) providing materials and applying 12mm thick cement plastering in fine sand on walls etc. ( 1 cement : 4 fine sand ) d) labour charges of removing of garbage from the site ( per day ) e) loading and unloading charges for removing garbage from the site 44 plumbing work a) p/fixing of waste pipe (branded ) b) p/fixing of cp jali c) p/fixing of wc seat with tank ( branded / equivalent ) d) p/fixing of wc seat without tank ( branded / equivalent ) e) p/fixing of wc seat cover ( branded / equivalent ) f) p/fixing of wc sistan tank ( branded / equivalent ) g) p/fixing of wc sistan ball ( branded / equivalent ) h) p/fixing of wash basin ( branded / equivalent ) i) p/fixing of urinal pot ( branded / equivalent ) j) p/fixing of gate wall ( ½” ) ( branded / equivalent ) k) p/fixing of gate wall (¾”) ( branded / equivalent ) l) p/fixing of gate wall (1” ) ( branded / equivalent ) m) p/fixing of gate wall (2”) ( branded / equivalent ) n) p/fixing of pvc connection 18” ( branded / equivalent ) o) p/fixing of pvc connection 24” ( branded / equivalent ) p) p/fixing of pvc connection 30” ( branded / equivalent ) q) p/fixing of bf wash basin round regular 18” ( branded / equivalent ) r) p/fixing of washbasin regular 18” ( branded / equivalent ) s) p/fixing of mixture tap ( branded / equivalent ) t) p/fixing of angle walve ( branded / equivalent ) u) p/fixing of bottle trap ( branded / equivalent ) v) p/fixing of soap dish ( branded / equivalent ) w) p/fixing of towel rod ( branded / equivalent ) x) p/fixing of towel rod bracket ( branded / equivalent ) y) p/fixing of wall mounted wc ( branded / equivalent ) z) p/fixing of floor mounted wc( branded / equivalent ) aa) p/fixing of liquid soap dispenser( branded / equivalent ) bb) p/fixing of jali steel 4” ( branded / equivalent ) cc) p/fixing of flush walve ( big size ) ( branded / equivalent ) dd) p/fixing of flush walve (small size) ( branded / equivalent ) ee) p/fixing of seat cover ( branded / equivalent ) ff) p/fixing of urinal pot ( large ) ( branded / equivalent ) gg) p/fixing of paper holder ( branded / equivalent ) hh) p/fixing of jet spray ( branded / equivalent ) ii) p/fixing of pillar cock ( big size ) jj) p/fixing of pillar cock ( small size ) kk) p/fixing of pvc pipe – 1” ( branded ) ll) p/fixing of pvc pipe 2” ( branded ) mm) p/fixing of pvc pipe 4” ( branded ) nn) p/fixing of pvc pipe 6” ( branded ) 17 45 electric work ( all items should be iso certified) a) supply & fixing of electric points with wires 1.5mm,2mm,2.5mm,4mm pvc pipe (1”) , switches , sockets, plates , screws etc b) supply of net connection wiring by using standard cables, ( cat 6, d link ) pvc bo , io box , phase plate and labour charges . c) supply & fixing of phone point wiring ( wire 5mm – finloex ) pvc pipe – 1” io box ( d link ) phase plate ( dlink ) for workstation . d) supply & fixing of 3pin socket with shutter 2mm ( 16a 240v ac ( 6 pin ) e) supply & fixing of switch with indicator 1m 1way 16a x240v ac f) supply & fixing of 3 module plate with cover frame g) supply &fixing of 3module surface mounted pvc gangue box h) supply , fixing of copper pvc cable 250/440 volt grade of size 4mm i) supply & fixing of cu earth wire single stand size 1.5mm j) supply , fixing of pvc flexible conduit size 1” k) supply , fixing of 2/3 pin socket with shutter 2m 6a 240 v a c ( 5 pin ) l) supply & fixing of switch with indicator 1m – 1 way 6a x 240 v ac m) supply & fixing of 8 module horizontal plate with cover frame n) supply & fixing of 8 module surface mounted pvc gangue box o) switch 1m 1way 6a x240 v ac p) supply & fixing of pvc box along with modular base & cover plate for modular switches in recess etc as required 8 module q) p/fixing of 2x2 36 w led panel light (iso certified) r) providing & fixing of led ceiling recessed down light / spot light or any other small light 16 w ( 150mm dia ) – iso certified. ...

Due Date : March 10, 2023

Tender Value : ₹ Ref. Documents

View Tender
38
Delhi Jal Board - Delhi

36640847 improvement of lighting arrangement of various bps in ac 44. , internal & external electrification at 1. sec 01 bps r.k puram.. 2. hill view bps. 3. vasant apartment bps. by caring out following works: wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthling the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required. ( 15 point in each bps ) , supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5 / 6 amps modular socket outlet and 5 / 6 amps modular switch, connection etc. as required. ( for light plugs to be used in non residential buildings ) . , wiring for light / power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit along with 1 no 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required. ( approx. 30mtrs in each bps. , supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5 / 6 & 15 / 16 amps modular socket outlet and 15 / 16 amps modular switch, connection etc. as required. ( 01 nos. in each bps ) , installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length ( up to 30 cm ) with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable etc. as required. ( one no. in each bps ) , installation, testing and commissioning of pre wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling / wall, including connection with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable and earthing etc. as required. ( 5 nos. in each bps ) , wiring for circuit / sub main wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required 1.14.12 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire ( 30 mtrs in each bps ) , supplying and fixing following way prewired sp&n mcb distribution board of steel sheet for 240 volts on surface / recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size frls pvc insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 2 + 4 way / 6 way , double door ( one no. in each bps ) , supplying and fixing 5 amps to 32 amps rating, 240 / 415 volts, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required single pole. ( 3 no. in each bps ) , supplying and fixing following rating, double pole, 240 volts, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required. 63 amps ( one no. in each bps ) , s / o ceiling fan, 1200 mm sweep make: havells / crompton / any djb approved make ( one no. in each bps ) , s / o wall fan, 400 mm sweep make: havells / crompton / any djb approved make ( one no. in each bps ) , s / o 20 watt led tube light complete fitting with tube make: havells / crompton / bajaj / philips / any djb approved make. ( 5 nos. in each bps ) , s / o energy saving environmental friendly, long life, exclusive innovative pressure die cast aluminium bay light with high power led as light source 70 watt ledlight fitting etc. complete as required for fixing on the wall. make: bajaj / havells / philips / any djb approved make ( 4 no. in each bps ) , s / o 40 mm dia g.i. pipe of 1 meter length with 1500 angle band, suitable for fixing of 80 watt led street light along with clamp, nut & bolt etc. ( 4 no. in each bps ) , s / o heavy duty exhaust fans, 450 mm sweep make: havells / crompton / any djb approved make ( one no. in each bps ) , installation testing & commissioning of 70 watt street light along with grouting of bolt and fixing of fan, exhaust fan and all supply item etc.at bps ( 4 job in each bps ) ...

Due Date : March 13, 2023

Tender Value : ₹ Ref. Documents

View Tender
39
Urban Development Department - Delhi

36526219 bids are invited for 1 wiring for light point fan point exhaust fan point call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface recessed medium class pvc conduit, as per bid specification 2 wiring for circuit submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface recessed medium class pvc conduit as required.as per bid specs 3 wiring for light power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface recessed medium class pvc conduit alongwith 1 no.4 sq. mm frls pvc insulated copper as per bid specs 4 supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend couplers etc. conforming to is 14930 part il complete with fitting and cutting, jointing etc.direct in ground 75 cm as per bid specs 5 laying of one number pvc insuated and pvc sheathedxlpe power cable of 1.1 kv grade offollowing as per bid specs 6 laying of one number pvc insuated and pvc sheathedxlpe power cable of 1.1 kv grade offollowing size in the existing rcc hume metal pipe as required as per bid specification 7 supplying and fixing of following ways surface recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar as per bid specs 8 supplying and fixing of following ways surface recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs but without mcbs and incomer as required, as per bid specification 9 supplying and laying 6 swg g.i. wire at 0.50 metre below ground level for conductor earth electrode, including connection termination with gi thimble etc as per bid specs 10 supplying and fixing 5 a to 32 a rating, 240 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete as per bid specification 11 supplying and fixing 5 a to 32 a rating, 240 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete as per bid specification 12 supplying and fixing 30 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete as per bid specification 13 supply of following multicore alumunium conductor xlpe insulated armoured cable 1.1 kv grade , 2 x 16 sq mm as per bid specification 14 supply of following multicore alumunium conductor xlpe insulated armoured cable 1.1 kv 4 x 50 sq mm as per bid specification 15 supplying and fixing following size modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required. dsr 2022 p no. 6, 1 or 2 module 75mm x 75mm 16 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc.as required.dsr 2022 p no.6 17 supplying and fixing 3 pin, 5 a ceiling rose on the existing junction box wooden block including connections etc. as required. dsr 2022 p no.7 18 supplying and fixing socket residual current device20a including connections etc as required. 19 supplying and fixing 63a fp rating, 240, 415 v c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete as per bid specs 20 supplyingand fixing of ceiling fan 1200 mm sweep with double ball bearing high speed etc as required. 21 supplyof led light batten 20 watt surface mounting with glare free opal diffuser ip 20 etc. as required. 22 providing and laying in position m 20 1 2 4 reinforced cement concrete foundation of size 500 x 500 x 1500 mm ic excavation of earth, providing cutting bending and placing in position reinforcement of clod twisted bar of 12 mm dia and 8 mm dia approx 15 kg ic supplying of 4 nos. as per bid specificiation 23 supply erection and commissioning of single section gi octagonal pole of 9 mtr heightwith suitable size detachable bracket suitabe to accomodate fur numbers 200 watt led flood light made out of 3 mm thick having bottom minimum 17 mm a f and top minimum 90 mm a f with built in connector control box with flush cover on height of 1000 mm as per bid specification attached 24 sitc of led floodlight of system wattage 200 and replacement of 400 watt mh light fitting floodlight should have ip65 pressure die cast alumunium housing for effective thermal management. the power of led should not be more than 200 watt as per bid specificiation total quantity : 1669...

Due Date : March 10, 2023

Tender Value : ₹ Ref. Documents

View Tender
40
Public Works Department - Delhi

36481828 tender for maintenance of electrical installation fans including pump set compound lighting etc at dte staff qtrs at sawan park delhi sh moei rmo pump sets round the clock operation & maintenance i / c attending and rectifying complaints of all electrical installations i / c compound light & drinking water supply pump etc. installed in the campus in all working days including sundays and holidays by providing following staff etc. as required ( a ) wiremen cum pump cum e&m operator 1 nos in each shift ( b ) khallasi 1 nos in general shift and as and when required 2 supplying & fixing of following electrical accessories suitable for existing different type fitting / switch box i / c testing etc. as required. ( labour already included in item no. 1 ) a ) s.p. 5 / 6 a, one way modular switch, isi marked 3 b ) s.p. 15 / 16 a, one way modular switch, isi marked 4 c ) 3 pin 5 / 6 a modular socket outlet, isi marked 5 d ) 6 pin 15 / 16 a modular socket outlet, isi marked 6 e ) stepped type modular fan regulator ( 2 module ) 7 f ) s.p. 5 / 6 a, one way switch, piano type isi marked 8 g ) s.p. 15 / 16 a, one way switch, piano type isi marked 9 h ) 3 pin 5 / 6 a socket outlet, piano type isi marked 10 i ) 6 pin 15 / 16 & 5 / 6 a socket outlet, piano type isi marked 11 j ) bell push, piano type 12 k ) pvc batten / angle holder 13 l ) 1 or 2 module cover plate 14 m ) 3 module cover plate 15 n ) 8 module cover plate 16 o ) 12 module cover plate 17 p ) step type fan regulator ( socket type piano ) 18 supplying & fixing of 3mm thick phenolic laminated sheet on existing switch board, loose wire box making holes etc as reqd. 19 wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size ms box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. a ) group b 20 rewiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm frls pvc insulated copper conductor single core cable as earth wire in existing surface / recessed steel / pvc conduit including dismantling as required.a ) group a 21 b ) group b 22 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as requireda ) 3 x 1.5 sq. mm 23 b ) 3 x 4 sq. mm 24 c ) 3 x 6 sq. mm 25 supplying and fixing of following sizes ofsteel conduit along with accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as requireda ) 20 mm 26 b ) 25 mm 27 supplying and fixing metal box of 150 mm x 75 mm x 60 mm deep ( nominal size ) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5 / 6 a socket outlet and 5 / 6 a piano type switch, connections, painting etc. as required. 28 supplying and fixing metal box of 180 mm x 100 mm x 60 mm deep ( nominal size ) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5 / 6 a & 15 / 16 a socket outlet and 15 / 16 a piano type switch, connections, painting etc. as required. 29 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5 / 6 a modular socket outlet and 5 / 6 a modular switch, connections etc. as required. 30 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5 / 6 a & 15 / 16 a modular socket outlet and 15 / 16 a modular switch, connections etc. as required. 31 supplying & fixing suitable size gi box wih modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, “c” curve including connections, testing etc. as required. 32 supplying and fixing metal box of following sizes ( nominal size ) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.a ) 180 mm x 100 mm x 60 mm deep 33 b ) 200 mm x 250 mm x 75 mm deep 34 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) a ) 12 way, double door 35 supplying and fixing cable end box ( loose wire box ) ( ip 43 ) suitable for following single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with testing and commissioning etc. as required.a ) for 12 way, double door spn mcbdb 36 supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.a ) single pole 37 b ) single pole and neutral 38 providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.a ) 100 a, 16 ka, tpmccb 39 supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930, part ii complete with fitting and cutting, jointing etc..direct in ground ( 75 cm below ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.a ) 63 mm dia ( od 63 mm & id 51 mm nominal ) 40 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc / hume / metal pipe as required.a ) upto 35 sq. mm 41 laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. a ) upto 35 sq. mm ( clamped with 1mm thick saddle ) 42 providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required 43 supplying, installation, testing and commissioning of pre wired, indoor led batten with extruded aluminium housing & opal diffuser. ip20 of following types suitable for cool day light having cct ( 5700k to 6500k ) , power factor >0.90, cri > 75 ( including dismantling the old fitting if any wherever required ) & minimum lumens output should be > 90 lumens per watt. with all accessories etc. directly on ceiling / wall, including connections with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable and earthing etc. as required. b ) 1x20 wattsled batten fitting. 44 supplying & fixing of decorative, wall mounting, brushed nickel / ss finish fixture with opal glass diffuser suitable for 9 w led lamp b22 base i / c 9 w led lamp complete with connection testing commissioning etc as reqd. 45 supply, installation, testing and commissioning of 1200 mm sweep, bee star rated, ceiling fan, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value ( cmm / w ) minimum 6.85, air delivery minimum 215 cmm, 350 rpm ( tolerance as per is : 374 2019 ) , thd less than 10%, including safety pin, nut bolts, washers, temperature rise=75 degree c ( max. ) , insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac supply, earthing with 1.5 sqmm fr pvc insulated copper conductor single core cable etc complete as required. 46 supplying and installation of heavy duty exhaust fan of 300 mm sweep 900 rpm in the existing opening, i / c making the hole suitable the size of the above fan making good the damage, connection testing commisioning with 1.5 sqmm fr pvc insulated copper conductor single core cable etc as reqd. 47 supplying & fixing aluminium louvers / shutters complete with frame suitable for 300 mm sweep exhaust fan etc as reqd. 48 rewinding of 1200 / 1400 mm ceiling fan with suitable size super enamelled copper wire after dismantling from the existing position and refixing the same on the existing position / ceiling with suitable size nut, bolts, cotter pin, rubber reel and replacement of the same wherever found defective during inspection for safe running of fan and cleaning the fan and fan blade with detergent and making connection with 1.5 sq. mm frls pvc insulated, copper conductor wire, testing and commissioning etc. complete as required and buy back the dismantled material. 49 dismentling, overhauling & reinstallation of existing ceiling fan complete with cleaning, greasing, replacement of bush, suitable ball bearing, split pin, nuts and bolts, etc with test run i / c credit of dismentle materials etc as reqd. 50 replacement of defective ball bearing in the existing ceiling fans i / c greasing complete etc. as reqd.a ) 6201 51 b ) 6202 52 sitc of pole / wall mounted box ( 300x200x105 ) mm size made out of ( smc ) sheet moulding compound dust & weather proof with front openable hinged type cover with locking arrangement i / c providing & fixing of following accessories on existing pole / wall with suitable arrangement as required.a ) 32 amp 5 way connector with backelite base.b ) 6 amp sp mcb c curve ( 10 ka ) 1 no.c ) earth studs 2 sets.d ) 40 x 5 mm clamp with 2 nos. 3 / 8 nut & bolts 1 sete ) push & clip handle to close / open 1 no. 53 repairing of following capacity of submersible / monobloc pumpset i / c replacement of mechanical seal tc / tc upper, mechanical seal tc / tc lower, ball bearing, o ring, stamping repairing, including dismantling, assembling, commissioning and testing the same on load after making electric connections at site i / c site visit by engineer and to and fro from site to workshop & back to site etc.complete with credit of dismantle etc as required.a ) 3 hp 54 b ) 15 hp 55 rewinding of following capacity 3 phase multi stage submersible / mono submersible pump set with suitable size water proof copper conductor wire i / c brazing metalling turning & polishing of shaft, replacement of gm bearing bush, thrust bush, thrust plate, necessary sleeves, pads etc. i / c buy back of dismantled material and making connection, testing and commissioning etc. complete as reqd.a ) 3 hp 56 b ) 15 hp 57 liftingof existing submersible bore well / open well 3 hp to 10 hp capacity pump set from the bore well with chain pulley block & tripod stand i / c cartage charge at site from the work shop. 58 lowering of 3 hp to 10 hp capacity bore well / open well pumpset in the bore well with chain pulley block and tripod stand i / c cartage charge pump set from work shop to site credit of old dismantle etc, as reqd. 59 sitc of 5 hp / 3.75 kw submersible pump starter having relay range 6 10a suitable for 415v 50hz, 3 phase motor complete with sheet enclosure, ammeter, voltmeter, start stop push button, on off led indication lamp and all other accessories including connections & testing credit of dismantle etc complete as required. 60 supplying & fixing / laying of 3 core 2.5 sq.mm flat water proof copper conductor submersible cable i / c connection for submersible pumpset etc. complete as reqd....

Due Date : March 04, 2023

Tender Value : ₹ 23.93 Lakhs

View Tender
41
Department of Financial Services - Delhi

36366269 bids are invited for ender for repair and maintenance of furniture and fixture items 1 computer table a ) replacement of lock b ) adjustment of drawer c ) minor repair of table d ) providing of key e ) opening of drawer f ) replacement of handle 4” g ) providing of key board tray h ) p / fixing of nova pan top 18mm with rubber beeding i ) p / fixing of key board channel 2 steel almirah a ) replacement of lock b ) replacement of handle c ) repair of locking system d. ) providing of keys e. ) opening of alimirah f. ) repair of lock g. ) p / fixing of new locking system h. ) p / fixing of bush i. ) p / fixing of legs for almirah j. ) painting of steel almirah ( big ) outside k. ) painting of steel almirah ( big ) both side l. ) painting of steel almirah ( small ) out side m. ) painting of steel almirah ( small ) both side 3 steel filing cabinet a ) replacement of lock b ) replacement of handle c ) providing of key d ) opening of filing cabinet e ) repair of lock f ) painting of steel filing cabinet ( big ) outside g ) painting of steel filing cabinet ( big ) both side h ) painting of steel filing cabinet ( small ) out side i ) painting of steel filing cabinet ( small ) both side 4 steel revolving chair a ) repair of revolving chair b ) overhauling axle of chair c ) replacement of wheel ( isi ) mark d ) overhauling & greasing of all parts of chair e ) replacement of spring ( big ) f ) p / fixing of steel base g ) p / fixing of pu plastic arms h ) p / fixing of plastic base . i ) p / fixing of synchro base ( branded ) j ) replacement of hydraulic cylinder 5 steel book case a ) p / fixing of lock 10 b ) p / fixings of handle c ) providing of key d ) opening of book case e ) repair of lock f ) repair of locking system 6 door lock a ) p / fixing of door lock with both side handles complete ( branded ) b ) repair of old lock c ) replacement of door lock ( branded ) d ) replacement of brass handle e ) replacement of door handle ( branded ) f ) opening of locked door g ) p / fixing of door stopper i. aluminium ii. brass h ) repairing of door i ) p / fixing of new hinges 4” ss finish j ) p / fixing of link lock ( sliding bolt ) k ) p / fixing of tower bolt ( alu ) i ) 6” l ) ii ) 8” m ) p / fixing of tower bolt ( iron ) a ) 6” b ) 8” n ) p / fixing of godrej cylindrical lock o ) p / fixing of aldrej ( brass ) p ) p / fixing of aldrej ( powder coated ) q ) p / fixing of aldrej ( alum ) r ) p / fixing of new door closer ( godrej ) s ) fixing of door closer t ) repair of door closer u ) p / fixing of spring v ) p / fixing of small rod w ) p / fixing of big rod x ) supply and fixing of new mortise pad lock with three key 60mm y ) supply / fixing of new mortise pad lock with 80mm z ) supply / fixing of new handles of mortise aa ) removing of mortise lock bb ) repair of mortise lock including of oiling & greasing cc ) supply / fixing of secret lock with three keys ( godrej make ) dd ) opening of secret lock ee ) removing of secret lock ff ) refixing of secret lock gg ) repair of secret lock in all respect including replacement of lever , spring , buttoin etc. hh ) supply of duplicate keys ii ) supply / fixing of new iron chitkani 4” jj ) supply / fixing of new iron chitkani – 6” kk ) supply / fixing of new iron chitkani 9” 11 ll. ) supply / fixing of new aluminium chitkani size : 4” mm ) supply & fixing of new aluminium chitkani of size : 6” nn ) supply / fixing of new aluminium chitkani of size : 9” oo ) repair / fixing of chitkani pp ) supply / fixing of new iron sliding bolt 12” qq ) supply / fixing of new iron sliding bolt 10” rr ) removing of sliding bolt ss ) refixing of sliding bolt 7 wooden table: a ) minor repair of wooden table b ) major repair of wooden table with wood c ) p / fixing of key board channel to wooden table d ) repair of drawer of wooden table e ) p / fixing of multipurpose lock ( harrison ) f ) replacement of handle – 4” g ) replacement of handle – 6” h ) p / fixing of legs to wooden table i ) p / fixing of lock to wooden table j ) p / fixing of knob / handle ( brass ) k ) p / fixing of knob / handles ( ord ) l ) p / fixing of fm lock m ) p / fixing of new drawer to wooden table n ) p / fixing of multi lock ( ord ) o ) p / fixing of ply table drawer 8. modular furniture a ) p / fixing of modular pedestal unit / / three drawer unit b ) dismantling of modular partition including removing of all garbage like wood , board , ply , sunmica etc. from the site . c ) refixing of modular partition d ) repair of modular table e ) p / fixing of fm lock f ) replacement of lock g ) repair of lock h ) opening of drawer of modular table i ) p / fixing of key board channel of modular table 9 modular pedestal unit / drawer a ) repair of drawer unit b ) p / fixing of fm lock c ) replacement of lock d ) repair of lock e ) opening of drawer of pedestal unit . f ) p / fixing of key board channel to drawer unit 10 repair of aluminium doors / window a ) p / fixing of new lock ( branded ) b ) p / fixing of new handle ( branded ) c ) major repair of door including cutting , dismantling and refixing of etc. complete in all respect . d ) repair of locking system e ) p / fixing of rubber beeding f ) p / fixing of aluminium section as per size required . g ) p / fixing of hinges ( ss ) 4” h ) p / fixing of floor machine ( isi ) 12 i ) p / fixing of glass panes a ) glass ( plain ) b ) glass ( tinted ) j ) p / fixing of aluminium beeding k ) p / fixing of pivot set 11 supply of wooden notice board / key board / pin up board made of 19mm thick commercial board , 1st class teak wood frame , blazer cloth , cover on 12mm thick soft cellotex duly fine lacquer polished . ( per sft ) 12 supply & installation of white marker board with all necessary accessories ( magnetic ) ( per sqft ) . 13 acrylic elevator / writing stand made of acrylic sheet 10mm thick , adjustable height with brass handle ( each ) . 14 supply of wooden coatstand with brass fittings 15 polishing work a ) officer table / centre table / astt. table etc. b ) wooden cushioned office chair c ) sofa set a. single seater b. two seater c. three seater d ) wooden partition screen e ) side rack / cupboard / wooden almirah / book shelf / card cabinet / display rack / notice board etc. f ) painting of partition with plastic paint g ) polishing of wooden partition h ) spirit polishing of wooden furniture items with putty etc. i ) painting of partition with duco paint j ) removing of old polishing of wooden furniture with scrapping / rubbing and making smooth surface k ) lacquer polishing of wooden furniture items l ) painting with synthetic enamel paint with approved brand and shade to wooden partition / wall cupboard racks etc m ) painting with plastic emulsion paint including rubbing , filling with altex on wall n ) cleaning of aluminium partition with thinner , dhoti etc . o ) painting of wall, ceiling , etc. oil bond distempering including rubbing , scrubbing etc. with sand paper for making smooth surface . p ) cleaning of wooden partition with thinner, dhoti and other necessary materials q ) cleaning of flooring with thinner , spirit etc 16 repair of wooden furniture ( with scre & nails ) a ) minor repair of chairs b ) major repair of chair c ) minor repair of almirah d ) major repair of almirah e ) minor repair of wooden table 13 f ) major repair of wooden table g ) minor repair of any other items h ) major repair of wooden rack i ) p / fixing of 4mm ply ( teak ) j ) p / fixing of 6mm ply ( commercial ) k ) p / fixing of 8mm ply ( commercial ) l ) p / fixing of 12mm ply ( commercial ) m ) p / fixing of 19mm ply ( commercial ) n ) p / fixing of board 12mm ( commercial ) o ) p / fixing of board 18mm ( commercial ) p ) p / fixing of board 19mm ( commercial q ) p / fixing of pre laminated board ( 18mm ) r ) p / fixing of pre laminated board ( 12mm ) s ) p / fixing of 19mm board ( teak ) t ) p / fixing of kunda chapka ( 3” ) u ) p / fixing of aluminium sheet v ) p / fixing of wooden bracket for keeping hot case w ) p / fixing of wooden pieces of suitable pieces for repair work ( per rft ) x ) p / fixing of wall catcher branded y ) p / fixing of wooden beeding / moulding z ) p / fixing of 1mm sunmica on wooden furniture items aa ) p / fixing of legs to sofa 17 p / fixing of acrylic sheet 8mm 18 supply of wooden stool of standard size : 18x18 19 supply of wooden stool of standard size : 24x24 20 supply of wooden foot rest of standard size : 24x18 21 p / fixing of wooden flooring [ uni floor / equivalent ) 22 p / fixing of vitrified tiles 23 p / fixing of wall tiles 24 p / fixing of wall paneling 25 p / fixing of wall paper ( branded ) 26 p / fixing of false ceiling ( 2”x2” ) with aluminium channels, beading as including all necessary hardware fittings and tolls etc complete . 27 p / fixing of gypsum false ceiling with plaster of paris board , made of aluminium channels grid and finish with one or two white wash coat on ceiling . 28 p / fixing of vertical blinds ( mac / equivalent ) 29 p / fixing of sun control film on glass window door / partition etc of approved quality and shade . 30 p / fixing of roman blind / roller blind ( branded ) 31 p / fixing of chick blind ( branded ) 32 p / fixing of zebra blind ( branded ) 33 repairing of blinds ( per sqft ) 34 lamination of photo / pcutres a ) lamination of photo pictures ( ord ) b ) lamination of photo pictures ( designer ) 14 c ) providing & fixing of photo pictures d ) fixing of photo frame e ) p / fixing of looking glass with teakwood frame f ) p / fixing of lamination of photo pictures ( ord ) 35 p / fixing of telescopic channel ( branded ) a. size : 14” b. size : 16 c. size : 18” 36 supply of glass ( plain ) ( per sft ) a. 6mm thick b. 8mm thick c. 10mm thick d. 12mm thick 37 supply of brown glass ( per sqft ) a. 6mm thick b. 8mm thick c. 10mm thick d. 12mm thick e. bevelling charges f. providing & fixing of rubber beeding g. glass cutting charges h. making of hole in glass i. providing & fixing of aluminium beeding 38 change of upholstery of sofa / chairs, including providing of tat , cotton , jute , markin , dori , casement bostic , nail , thread , spring and labour charges . a. four seater b. three seater c. two seater d. single seater e. wooden cushioned office chairs f. executive high back revolving chair with piping heavy design . g. medium back revolving chair h. high back revolving chair i. workstation revolving chair j. steel cushioned visitor chair ( fixed ) k. supply of cloth for sofa / chairs ( as per sample approved ) 39 p / fixing of rubber cushions ( isi mark ) a ) size : 21x22x4 for sofa b ) size : 21 x22x2 for chairs c ) size : 18x18 x2 for chairs d ) p / fixing of foam sheet 25mm ( hd ) to sofa / chair e ) p / fixing of foam sheet 50mm ( hd ) to sofa / chair f ) stitching of curtain with pleat & lining ( ord ) g ) stitching of i let curtain ( ord ) h ) p / fixing of hooks of curtain 15 i ) repair of wooden frame of sofa and chair by providing of wood , nail fevicol etc. j ) supply of curtain cloth ( as per sample approved ) k ) supply of lining of cloth as per sample approved 40 p / fixing of new partition made of 2 x2 kailwood frame with both side teak ply / sunmica 41 dry cleaning of furniture items : a ) sofa ( per seat ) b ) wooden cushioned office chair c ) executive high back revolving chair with piping heavy design . d ) medium back revolving chair e ) high back revolving chair f ) workstation revolving chair g ) steel cushioned visitor chair h ) vertical blinds ( per sqft ) i ) roller blinds ( per sqft ) 42 miscellaneous items : a ) dismantling of wooden storage b ) refixing of wooden storage c ) dismantling of wooden partition d ) p / fixing of setup box with wooden frame and all necessary hardware fittings . e ) p / fixing of setup box with glass and all necessary hardware fittings. f ) major repair of aluminium window with all necessary hardware fittings g ) writing / numbering with enamel paint of furniture items / office equipments h ) p / fixing of aluminium grill 3 i ) p / fixing of aluminium grill 2” j ) p / fixing of mosquito jali ( iron ) k ) complete repair of aluminium door including dismantling and refixing with all necessary hardware fittings etc. complete in all respect l ) repair / adjustment of aluminium door m ) p / fixing of aluminium section as per size required . n ) p / fixing of floor machine ( isi ) o ) dismantling of vitrified tiles in floor including disposal of unusable material like concrete, cement , plaster etc from site p ) labour charges ( per day ) q ) fixing of exhaust fan with wood , screw , nut bolt etc 43 miscellaneous civil work a ) providing materials & erection of full brick wall with common burnt clay fps ( non modular ) bricks with cement mortar ( 1 cement : 6 coarse sand ) b ) providing materials & erection of half brick wall with common burnt clay fps ( non modular ) bricks with cement mortar ( 1 cement : 3 coarse sand ) 16 c ) providing materials and applying 12mm thick cement plastering in fine sand on walls etc. ( 1 cement : 4 fine sand ) d ) labour charges of removing of garbage from the site ( per day ) e ) loading and unloading charges for removing garbage from the site 44 plumbing work a ) p / fixing of waste pipe ( branded ) b ) p / fixing of cp jali c ) p / fixing of wc seat with tank ( branded / equivalent ) d ) p / fixing of wc seat without tank ( branded / equivalent ) e ) p / fixing of wc seat cover ( branded / equivalent ) f ) p / fixing of wc sistan tank ( branded / equivalent ) g ) p / fixing of wc sistan ball ( branded / equivalent ) h ) p / fixing of wash basin ( branded / equivalent ) i ) p / fixing of urinal pot ( branded / equivalent ) j ) p / fixing of gate wall ( ½” ) ( branded / equivalent ) k ) p / fixing of gate wall ( ¾” ) ( branded / equivalent ) l ) p / fixing of gate wall ( 1” ) ( branded / equivalent ) m ) p / fixing of gate wall ( 2” ) ( branded / equivalent ) n ) p / fixing of pvc connection 18” ( branded / equivalent ) o ) p / fixing of pvc connection 24” ( branded / equivalent ) p ) p / fixing of pvc connection 30” ( branded / equivalent ) q ) p / fixing of bf wash basin round regular 18” ( branded / equivalent ) r ) p / fixing of washbasin regular 18” ( branded / equivalent ) s ) p / fixing of mixture tap ( branded / equivalent ) t ) p / fixing of angle walve ( branded / equivalent ) u ) p / fixing of bottle trap ( branded / equivalent ) v ) p / fixing of soap dish ( branded / equivalent ) w ) p / fixing of towel rod ( branded / equivalent ) x ) p / fixing of towel rod bracket ( branded / equivalent ) y ) p / fixing of wall mounted wc ( branded / equivalent ) z ) p / fixing of floor mounted wc ( branded / equivalent ) aa ) p / fixing of liquid soap dispenser ( branded / equivalent ) bb ) p / fixing of jali steel 4” ( branded / equivalent ) cc ) p / fixing of flush walve ( big size ) ( branded / equivalent ) dd ) p / fixing of flush walve ( small size ) ( branded / equivalent ) ee ) p / fixing of seat cover ( branded / equivalent ) ff ) p / fixing of urinal pot ( large ) ( branded / equivalent ) gg ) p / fixing of paper holder ( branded / equivalent ) hh ) p / fixing of jet spray ( branded / equivalent ) ii ) p / fixing of pillar cock ( big size ) jj ) p / fixing of pillar cock ( small size ) kk ) p / fixing of pvc pipe – 1” ( branded ) ll ) p / fixing of pvc pipe 2” ( branded ) mm ) p / fixing of pvc pipe 4” ( branded ) nn ) p / fixing of pvc pipe 6” ( branded ) 17 45 electric work ( all items should be iso certified ) a ) supply & fixing of electric points with wires 1.5mm, 2mm, 2.5mm, 4mm pvc pipe ( 1” ) , switches , sockets, plates , screws etc b ) supply of net connection wiring by using standard cables, ( cat 6, d link ) pvc bo , io box , phase plate and labour charges . c ) supply & fixing of phone point wiring ( wire 5mm – finloex ) pvc pipe – 1” io box ( d link ) phase plate ( dlink ) for workstation . d ) supply & fixing of 3pin socket with shutter 2mm ( 16a 240v ac ( 6 pin ) e ) supply & fixing of switch with indicator 1m 1way 16a x240v ac f ) supply & fixing of 3 module plate with cover frame g ) supply &fixing of 3module surface mounted pvc gangue box h ) supply , fixing of copper pvc cable 250 / 440 volt grade of size 4mm i ) supply & fixing of cu earth wire single stand size 1.5mm j ) supply , fixing of pvc flexible conduit size 1” k ) supply , fixing of 2 / 3 pin socket with shutter 2m 6a 240 v a c ( 5 pin ) l ) supply & fixing of switch with indicator 1m – 1 way 6a x 240 v ac m ) supply & fixing of 8 module horizontal plate with cover frame n ) supply & fixing of 8 module surface mounted pvc gangue box o ) switch 1m 1way 6a x240 v ac p ) supply & fixing of pvc box along with modular base & cover plate for modular switches in recess etc as required 8 module q ) p / fixing of 2x2 36 w led panel light ( iso certified ) r ) providing & fixing of led ceiling recessed down light / spot light or any other small light 16 w ( 150mm dia ) – iso certified....

Due Date : March 03, 2023

Tender Value : ₹ 2 Crore

View Tender
42
Netaji Subhas Institute Of Technology - Delhi

36159551 development of iot lab at nsut east campus geeta colony, delhi 110031 1 civil work: 1 providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from m.s. sheets and galvanized with zinc coating of 120 gms / sqm ( both side inclusive ) as per is : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate g.i. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to g.i. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long g.i. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c / c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per anufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the engineer in charge but excluding the cost of painting with :12.5 mm thick tapered edge glass reinforced gypsum ( grg ) board conforming to is: 2095 ( part 3 ) :1996 ( boards with bis certification marks ) 2 2 providing & fixing false ceiling at all heights with grg ( glass fibre reinforced gypsum ) false ceiling tiles of size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, nrc0.50 to 0.75 as per is 8225:1987, non combustible as per bs 476 ( part 4 ) 1970 and light reflectance of 85% ( minimum ) to be laid in true horizontal level suspended on interlocking metal t grid of hot dipped galvanised iron section of 0.33mm thick ( galvanized @ 120 grams per sqm including both sides ) comprising of main t runners of size 15x32 mm of length 3000 mm, cross t of size 15x32 mm of length 1200 mm and secondaryintermediate cross t of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanisedmild steel items ( galvanizing @ 80 grams per sqm ) i.e. 50 mm long, 8 mm outer diameter m 6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and l shape level adjuster of size 85x25x2 mm.galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. the work shall be carried out as perspecifications, drawing and as per directions of the engineer in charge.with semi perforated 12 mm thick micro tegular edged grg false ceiling tiles. 3 3 distempering with 1st quality acrylic distemper, having voc ( volatile organic compound ) content less than 50 grams / litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.one coat 4 4 providing and placing of modular workstations system of size 1500mm ( w1 ) x 1500mm ( w2 ) x 600mm ( d ) x 750 griha compliant having following specifications. main partition panel having 4 horizontal blocks and consists of vertical extrusions 2nos and horizontal extrusions 5 nos made of 1.2mm thick aluminium with duly powder coated at every division of tile / block. each panel shall have bottom frame fabricated for 52.4mm panel comprises of 2 nos. l channels made of 2mm thick crca ( cold rolled, cold aneeled ) steel ( is: 513 ) , formed plates of 3mm thick hot rolled steel ( is: 2062 ) & erw steel tube of size 35x15x1.6mm thick in oval cross section ( is: 7138 ) welded together. the complete bottom frame shall be powder coated with an average of 50 60 microns thickness of epoxy powder coating. the bottom frame is bolted with the upright verticals. each panel is provided with 2nos legs of height 120mm are fixed at the bottom frame of the panel. legs construction adjustment of the height by 50mm. it will be coated with 45 50micron locking:10 lever cam lock & central rh locking with actuator & lock channel mechanism. top panel : 0.8mm thick metal straight edge top. castors : swiveling non lockable 4nos castors mounted below the body shell. the total drawer unit is finished with epoxy polyester powder coated to the thickness of 50 microns ( + / 10 ) . the product should be complete and as per approved sample and as per the direction of engineer in charge. 5 supplying and placing in position faculty table of following specifications. overall dimension of the main desk shall be 1800mmw x 750mmd x 1050mm hthe system shall be a desk based system with a platform understructure made up of a combination of ms. tubes and plates. the product should be greenpro certified and should be listed in griha product catalogue in the following category griha v.3 criteria: 34; griha v.2015 criteria: 31 & svagriha criteria: 14. understructure the slanted legs are connected to the understructure with the help of pdc connectors to provide a stable and sturdy base for the worktops. modesty panel shall be of acrylic ( 8 mm thick acrylic both side frosted ) or of metal 1.2 mm thick crca. worktop worktop shall be made of 25mm thick pre laminated board conforming to is: 12823. all the edges of work surface shall be provided with machine pressed 2 mm thick pvc lipping glued with hot melt eva glue.the worktop shall be complete with provisions for screen mounting as well as for wire management on the workstation. provisions for fixing of the switches shall be on the wire tray / channel. a wire management it shall be a part of the understructure and can be in the form of enclosed metal tray or 2 level enclosed channel to provide concealed wire management throughout the cluster formation. wire riser leg or independent wire risers shall be provided as per the layout structure.ccess flaps with soft closing technology shall be provided on the table tops to access the switch points on the tray. pedestal having 3 drawers unit having flat metal front and top with central locking. the drawer unit consists of 2box and 1file drawers. the overall size of the drawer units is 450mm ( w ) x 435mm ( d ) x 646mm ( h ) . construction & material of drawer unit :welded assembled of 0.8mm thick crca for body shell, drawer front & tray, front side stiffener, rear side stiffener & bottom, 1.2mm thick crca top stiffene, bottom stiffener, drawer fronts & metal front straight edge. all drawers with double extension precision ball slide shall be provided. for drawer pulling, side wise tapered recess provided in shell behind drawer fronts. locking:10 lever cam lock & central rh locking with actuator & lock channel mechanism. top panel : 0.8mm thick metal straight edge top. castors : swiveling non lockable 4nos castors mounted below the body shell. the total drawer unit is finished with epoxy polyester powder coated to the thickness of 50 microns ( + / 10 ) . 6 6 supplying and placing stool of following specifications:the seat shall be made up of 1.2±0.1cm thick flat plywood with moulded polyurethane foam and are upholstered with replaceable synthetic leather covers. the dimensions of seat shall be diameter 40.0 cm and adjustments are 360° revolving type. the back foam shall be designed with contoured lumbar support for extra comfort. the upholstery shall be available in synthetic leather. the dimensions of back shall be 45.0 cm ( w ) covered with polyurethane foam. the hr polyurethane foam shall be moulded with density = 45 + / 2 kg / m3and hardness load 16 ± 2 kgf as per is:7888 for 25% compression. the manual height adjustment shall be very easy to operate with a help of a knob. it should be easily locked at the most comfortable position. the five prong pedestal shall be fabricated from 0.2 ± 0.02 cm thick hr sheet ( is : dd 1079 / hr ) , powder coated ( dft 40 60 microns ) and shall be fitted with an injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. the pedestal shall be 55.0±0.5cm pitch circle diameter ( 65.0± 1.0cm with castors ) , circular foot ringof dia 52.0±0.2cm shall be made up of dia 1.9±0.2 x0.12±0.0096cm thk ms erw tube for foot support in high base stool.the twin wheel castors shall be injection moulded in black nylon. overall dimensions shall bewidth 65.0cm, depth 65.0 cm, height 88.0 to 99.5 cm, seat height 67.0 to 78.5 cm. 7 7 supplying and placing revolving chair with the cushioned seat assembly consists of seat base moulded in glass filled poly amide, moulded polyurethane foam & upholstered with high stretch knitted polyester fabric. the cushioned back assembly consists of back inner moulded in polypropylene in situ moulded with polyurethane foam & upholstered with high stretch knitted polyester fabric.* full back size : 45.5 cm. ( w ) x 53.0 cm. ( h ) *seat size :48.5 cm. ( w ) x 47.0 cm. ( d ) the hr polyurethane foam used in seat and back cushion is moulded in density 45±2 kg / m3, and hardness load 16 ± 2 kgf as per 15:7888 for 25% compression.the seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. the cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. the 5 shaped spines moulded in high strength glass filled poly amide and the spine connector moulded in glass filled poly am ) de form the back spine structure involved in multi dimensional recline motion.the variable tilt angle recline motion can be adjusted with 3 position tilt limit feature which is inbuilt in seat base and the tension ( return force ) is user weight dependent. the assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled poly amide. the height adjustment feature is button operated having adjustment of 6.6±0.5cm. the armrest top is made up of integral skin pu moulded over plastic inner moulded in glass filled poly amide.the seating height can be adjusted with a pneumatic gas lift having an adjustment stroke of 9.2 ± 0.3 cmthe pedestal is injection moulded in glass filled poly amide and fitted with 5 nos. in wheel castors. the pedestal is 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors. 5 nos. twin wheel castors are injection moulded in poly amide having 5.0±0.1cm heel diameter and assembled to the pedestal. the product shall be from one of the approved make of godrej, hermanmiller, steel case, delform or vitra only. 8 8 supplying and placing almirah of following specifications : almirah steel shall have an overall size of916mm ( w ) x486mm ( d ) x1980mm ( h ) with welded construction. it should have the shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.8mm ( high yield strength ) and all other components shall have a thickness of 0.9mm. these components shall be made of crca ‘d’ grade high yield strength as per is:513. the almirah steel should have a mazak handle and three way locking mechanism with shooting bolts. it should have a height wise adjustable shelf mounting which shall have a uniformly distributed load capacity of max 40 kg. it should also have a m10 screw type leveller with hex plastic base. the finishing shall include epoxy powder coated to the thickness of 50 microns ( + / 10 ) . plenty of colour options and shelving options shall be available. 9 9 supplying and placing locker of following specificationsoverall size of 4 door locker shall be 380mm ( w ) x450mm ( d ) x1830mm ( h ) .stackability shall have add on units that can be stacked width wise to form bank of lockers having common side panel. locking shall have 10 lever cam lock with lock lever plus option of hasp arrangement . material shall be crca 0.6 mm thickness . construction shall be rigid knockdown construction , shelf shall be uniformly distributed load capacity per each shelf level is 35 kg maximum . finish shall be epoxy polyester powder coated to the thickness of 50 microns . handle / label holder shall be aesthetically appealing snap fit absplastic handle . ventilation shall be attractive punched pattern for ventilation . 10 10 supplying and placing wall storage of following specifications overall dimensions of wall storage 900 w shall be 900 mmw x 328mm d x 785 mmh . the construction shall be aesthetically appealing completely knock down construction made from 0.6 mm thk. crca as per is 513 . horizontal stiffener shall be made from 1.2 mm thk. crca as per is 513 . the doors shall be madefrom 18 mm thk. interior grade pre laminated board as per is 12823 or 18 mm thk . plain particle board as per is 3087 with 0.6 thk. with 0.6 mmthk. decorative laminate and 0.6 mm thk. backing laminate as per is 2046 on either side . all edges shall be duly sealed with 2 mm thk. pvc edge banding . twodoor withsingle lockon rhdoor . locking shall be 10 lever cam lock lever at the bottom of the door .shelving shall be heightwise adjustable shelf 1 no. uniformly distributed load capacity of 25 kg udl .the finish shall be epoxy powder coated to the thickness of 50 microns . the doors shall be 448 mm w x 18 mm d x 783 mm h rh side door with lock. 448 mm w x 18 mm d x 783 mm h lh side door w / olock . the doors shall be madefrom 18 mm thk. interior grade pre laminated board as per is 12823 or 18 mm thk . plain particle board as per is 3087 with 0.6 thk. with 0.6 mmthk. decorative laminate and 0.6 mm thk. backing laminate as per is 2046 on either side . all edges shall be duly sealed with 2 mm thk. pvc edge banding .it shall have two door with single lock on rh door 11 11 providing and fixing manual chain operated roller blinds consisting of 100% polyester fabric, fabric thickness 0.50 mm fabric weight = 270 gsm+ 5% , fabric width 230cms, tearing strength 4.5 kgf warp, bursting strength 34 kgf, colour fastness to light 5 to 6 grade in position of standard quantity and approved shade / colour including necessary accessories, ms clamps.screws and drilling etc. as required all complete as per directions of engineer in charge. ( approved make: vista / mac / sd ) 12 electrical worksh 01 ( wiring and accessories ) 1 wiringforlightpoint / fanpoint / exhaustfanpoint / callbellpoint with1.5 sq.mmfrls pvc insulated copper conductor single core cable in surface / recessedmediumclasspvcconduit, withmodular switch, modularplate, suitablegiboxandearthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required.a group c 13 2 wiringforgroupcontrolled ( looped ) lightpoint / fan point / exhaustfan point / call bell point ( without independent switch etc. ) with 1.5 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed pvc conduit, and earthing the point with 1.5 sq. mm frls pvc insulated copper conductor single core cable etc. as required.a group c 14 3 supply and fixing suitable sizegi box with modular plateand coverinfrontonsurfaceorinrecess includingprovidingandfixing6pin, 15 / 16amps modular socket outlet and 15 / 16 amps modular switch , connection etc . as required . 15 4 wiring for light / power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface / recessedmediumclasspvcconduitalong with1no.4sq.mmfrlspvcinsulatedcopper conductor single core cable for loop earthing as required. 16 5 wiring for light / power plug with 4x4 sq. mm frls pvc insulated copper conductor single core cable in surface / recessedmediumclasspvcconduit alongwith2nos.4sq.mmfrlspvcinsulated copper conductor singlecorecablefor loopearthing as required. 17 6 wiringforcircuit / submainwiringalongwithearth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit asrequired.a ) 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 18 b ) 2 x 10 sq. mm + 1 x 6 sq. mm earth wire 19 7 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable inthe existing surface / recessedsteelconduitasrequired a ) 3 x 2.5 sq. mm 20 b ) 3 x 4 sqmm 21 c ) 6 x 4 sq. mm 22 8 supplying and fixing modular blanking plate , on the existing modular plate & switch box excluding modular plate etc. as required. 23 9 supplying and fixing following modular switch / socketontheexistingmodularplate&switchbox including connectionsbutexcludingmodularplate etc. as required.a 5 / 6 a switch 24 b 3 pin 5 / 6 a socket outlet 25 10 supplying and fixing following modular base & coverplateonexistingmodularmetalboxesetc.as required.a 3 module 26 b 6 module 27 11 supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required.a 12 module ( 200mmx150mm ) 28 sh 02 ( distribution board ) 12 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted.a ) 6 way ( 4 + 18 ) , double door 29 13 supplyingandfixing5ampsto32amps, rating, 240 / 415volts, ccurve, miniaturecircuitbreaker suitableforinductiveloadoffollowingpolesinthe existing mcb db complete with connections, testing and commissioning etc. as required.a ) single pole 30 14 supplying and fixing folowingrating double pole 240 volts, mcbin the existing mcb db complete with connections, testing and commissioning etc. as required.a ) 63 amp doublepole mcb 31 15 supplyingandfixingfollowingratingdoublepole 240volts, residual current circuit breaker ( rccb ) , having sensitivity of 30 ma in the existing mcb db complete with connections, testing and commissioning etc. as required.a ) 63 amp dp rccb 32 16 supplying and fixing 63 amps rating, 240 / 415 volts, 10 ka, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.a single pole 33 17supplying and fixing tpn mcb 63 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required 34 sh 03 light / fan fixtures ) 18 dismantling the existing worn out / defective fittings from the ceiling andsitc of minimum 36 watt aluminium slim energy efficient led panel light fitting made of crca sheet, steel housing duly powder coatedhaving system efficacy minimum 100 lumen / watt lm79, color temp 6500 deg k, symmetric glare free full opal diffuser, ip 20 illumination in the false ceiling, recess mounting suitable for fitting in the 600mm x 600mm square existing space having complete with all standard accessories including drivers etc. complete as required. 35 19 sitc of minimum 20 watt aluminium slim energy efficient led panel light fitting made of crca sheet, steel housing duly powder coatedhaving system efficacy minimum 100 lumen / watt lm79, color temp 6500 deg k, symmetric glare free full opal diffuser, ip 20 illumination in the false ceiling, suspended mounting suitable for fitting in the existing space having complete with all standard accessories including drivers etc. complete as required. 36 20 supply, installation, testing and commissioning of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current ( bldc ) motor, class of insulation: b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value ( cmm / w ) minimum 6.85, air delivery minimum 215 cmm, 350 rpm ( tolerance as per is : 374 2019 ) , thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c ( max. ) , insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. 37 sh 04 ( earthing ) 21 earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories and providing masonryenclosurewithcoverplatehavinglocking arrangementandwateringpipeof2.7mtrlongetc with charcoal, coke and salt as required. ( for computer earthing ) 38 22 providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required. 39 23 providing and fixing 25 mm x 5 mm copper strip in 40 mm dia g.i. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re filling etc. as required. 40 sh 05 ( networking ) 24 supplying and drawing of utp 4 pair cat 6 lan cable in the existing surface / recessed steel / pvc conduit as required. 1 run of cable ( make: commscope systimax only ) 41 25 providing and fixing 24 port loaded straight patch panel of height 1u in the existing data end rack including making connections, channel labellingetc. complete as required. 42 26 supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.a rj 45 information outlet 43 27 supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required.a 1 or 2 module 44 28 providing and fixing stranded low smoke halogen cordage unshielded cat 6 modular patch cord of length 1 mtr with plug insertion life not less than 750 times and minimum plug retention force of 133n i / c making connections etc. complete as required. 45 29 providing and fixing stranded low smoke halogen cordage unshielded cat 6 modular patch cord of length 2 mtr with plug insertion life not less than 750 times and minimum plug retention force of 133n i / c making connections etc. complete as required. 46 30 sitc of12u floor mount network rack with accessories ( make: rittal / apw / emerson ) 47 31 sitc of 24 port non poe managed access switchs per specifications in annexure a as per directions of engineer in charge 48 32 5 years 24x7 onsite comprehensive warranty and support for24 port non poe managedaccess switch as per specifications provided and installed under this contract as required. a ) for 1st year 49 b ) for 2nd year 50 c ) for 3rd year 51 d ) for 4th year 52 e ) for 5th year 53 33 suppling and fixing of following sizes of medium class pvc conduit along with accessories in surface / recess inculding cutting the wall and making good the same in case of recessed condit as required.25mm pvc conduit 54 34 supplying and fixing of upvc trunking of size 100 x 50 along with accessories on surface complete as required. 55 35 dismantling & buy back of old & defective following items as per required. a 4 x 1 light fitting. 56 b ceiling fans...

Due Date : February 15, 2023

Tender Value : ₹ 37.97 Lakhs

View Tender
43
Public Works Department - Delhi

36044221 tender for eor to quarter no. d ii 89 at iti campus, pusa, new delhi. ( sh : electrical work ) . wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. 2 group b 3 wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed steel conduit as required. 4 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire 5 2 x 4 sq. mm + 1 x 4 sq. mm earth wire 6 4 x 4 sq. mm + 2 x 4 sq. mm earth wire 7 2 x 6 sq. mm + 1 x 6 sq. mm earth wire 8 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required. 9 3 x 1.5 sq. mm 10 3 x 4 sq. mm 11 6 x 4 sq. mm 12 3 x 6 sq. mm 13 supplying and fixing of following sizes of steel conduit along with accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 14 20 mm 15 25 mm 16 32 mm 17 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. 18 25 mm 19 supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 20 5 / 6 a switch 21 3 pin 5 / 6 a socket outlet 22 15 / 16 a switch 23 6 pin 15 / 16 a socket outlet 24 telephone socket outlet 25 tv antenna socket outlet 26 bell push 27 supplying & fixing suitable size gi box wih modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, “c” curve including connections, painting etc. as required. ( for ac & gyser ) 28 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 29 6 way, double door 30 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 31 16 way, double door 32 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 33 8 way ( 4 + 24 ) , double door 34 supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 35 single pole 36 supplying and fixing following rating, double pole, 240 v, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required 37 63 a 38 supplying and fixing following rating, double pole, ( single phase and neutral ) , 240 v, residual current circuit breaker ( rccb ) , having a sensitivity current 30 ma in the existing mcb db complete with connections, testing and commissioning etc. as required. 39 63 a 40 supplying and fixing following rating, double pole, 240 v, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required. 41 40 a 42 supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required. 43 1 or 2module ( 75 mmx75 mm ) 44 3 module ( 100 mmx75 mm ) 45 6 module ( 200 mmx75 mm ) 46 8 module ( 125 mmx125 mm ) 47 suppying & fixing 2 modules stepped type electronic fan regulators in the existing modular plate switch box including connections but excluding modular plates etc as required. 48 supplying and drawing following pair 0.5 mm dia frls pvc insulated annealed copper conductor, unarmored telephone cable in the existing surface / recessed steel / pvc conduit as required. 49 1 pair 50 supplying and drawing co axial tv cable rg 6 grade, 0.7 mm solid copper conductor pe insulated, shielded with fine tinned copper braid and protected with pvc sheath in the existing surface / recessed steel / pvc conduit as required. 51 supplying installation, testing and commissioning of 1200 mm sweep anti dust technology based ceiling fan with copper winding including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable, complete etc. as required. 52 supplying installation, testing and commissioning of 1200 mm sweep ceiling fan with copper binding including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable i / c credit for old dismantled material etc. complete as required 53 supplying, installation, testing and commissioning of following size heavy duty exhaust fan of 300 mm sweep 900 rpm single phase, in the existing opening i / c louver shutter making good the damage, connection, testing, commissioning etc. as required. 54 supplying installation, testing and commissioning of ip 65 surface mounted led bulkhead type fittingfor having minimum system lumens 1000 & system efficacy 80 lumens / watt in 5000 6000 k cct including mounting on surface with help of ms clamps etc including connection , earthing etc. as reqd. 55 supplying, installation, testing & commissioning of surface typewall mounted integrated 4 feet ledfitting with aluminium housing for having minimum system lumens 2000 & system efficacy 100 lumens / watt self ballastedwith pc diffuser having, power factor of =0.95, cri of =80%, thd =10%, cct 4000 6600k ( as required ) , suitable for 230 v, 50 hz, 1 ¢ ac supply i / c fixing on wall / ceiling, earthingetc. as required. 56 supplying, installation, testing & commissioning of surface typewall mounted integrated 4 feet ledfitting with aluminium housing for having minimum system lumens 3600 & system efficacy 100 lumens / watt, self ballastedwith pc diffuser having, power factor of =0.95, cri of =80%, thd =10%, cct 4000 6600k ( as required ) , suitable for 230 v, 50 hz, 1 ¢ ac supply i / c fixing on wall / ceiling, earthingetc. as required. 57 supplying, installation, testing & commissioning of decorative, single bracket, wall mounting, ss finish fixture with opal glass diffuser 6 / 10 watt led bulb with 3000k / 5600 6000l ( cct ) for direct lighting i / c wiring and making connections with 1.5sq.mm. pvc insulated frls, copper conductor, single core cable including loop earthing with 1.5 sq.mm frls pvc insulated copper conductor, single core cable complete etc. as required. 58 supplying , installation & testing & commissioning of ventilation fan 250 mm with suitable size louver complete with frame in the existing opening, including making the hole to suit the size of above fan and making good the damage, connection, testing, commissioning etc. as required. 59 supplying & fixing of electronic ding dong door bell suitable for single phase 230v i / c connections with 1.5 sqmm copper conductor cable, testing & commissioning etc complete as reqd. 60 supplying and laying of one number pvc insulated and pvc sheated / xlpe aluminium conductor armoured power cable of 1.1 kv grade of following size in existing hdpe pipe etc as reqd. 61 3 x 10 sqmm 62 supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930, part ii complete with fitting and cutting, jointing etc..direct in ground ( 75 cm below ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 a ) 63 mm dia ( od 63 mm & id 51 mm nominal ) 64 supplying & laying and fixing of one number pvc insulated and pvc sheathed / xlpe aluminium armoured power cable of 1.1 kv grade of following size on wall surface as required. 65 3 x 10 sq.mm ( on surface ) 66 supplying and fixing call bell / buzzer suitable for single phase, 230 v, complete as required. 67 supply, installation, testing and commissioning of upward and downward wall mounted fixture / wall sconces lights having space saving and eye captivations, soothing brightness, giving an elegent and charging to home and suitable size holder for 2 x 6 watt led light bulb fittings decover having high efficiencies i / c base arrangement for fixing on wall and connections etc complete as required. 68 supplying / replacement , installation, testing & commissioning of having minimum system lumens 1200 & system efficacy 100 lumens / watt, led bollard light fittings are made of cast alum with small windsor fixture and opal diffuser for glare free ligghting with ip 65 ik 10 protection, 5700k, cct 3000k including suitable foundation with complete mounting arrangement i / c all accessories / attachments, making connections etc. as reqd i / c credit for old material as and where basis etc as reqd. as per direction of enginer in charge. 69 supplying, installation, testing & commissioning ofhaving minimum system lumens 1500 & system efficacy 100 lumens / watt, round shape led ground burrial light pressure die cast aluminium housing, powder coated with weather proof gasket ensuring ip 68 protection, heat resistant toughend glass, optics wide beam with anodised aluminium reflectors, cct 2700k 6500k i / c all accessories / attachments, making connections, providing and fixing suitable base for light fixture etc. as reqd. as per direction of enginer in charge. 70 supplying installation, testing & commissioning of led post top fitting of having minimum system lumens 4500 & system efficacy 100 lumens / watt, thd =10%, power factor=0.95, cri=80, ip 66 made out of high pressure die cast aluminium housing with pre wired gear tray with leds and driver, supply directly i / c connections with 1.5 sqmm., pvc insulated, frls copper conductor, single core cable on the existing pole complete with making suitable arrangement to fix on the existing pole using reducer / enlarger if required, testing and commissioning etc. as required. 71 supplying and drawing following sizes of pvc insulated copper conductor multicore cable in the existingpoles and bracket from cable termination connector to the fitting i / c providing suitable copper lugs connections etc. as reqd. ( a ) 3core x 2.5 sq. mm 72 supplying, installation, testing & commissioning of flood light fitting led made of pressure die cast aluminum with high power ledhaving minimum system lumens 10800 & system efficacy 120 lumens / watt, cct = 3000 6500k, cri=70, surge protection device = 4kv, secondary optics with lens, ip 66 housing, electronic driver, on the existing pole / wallincludingconnection etc. complete as required. 73 sitc of weather proof pole box made out of hot moulded smc sheet with clamp / fastner neutral link strip, gland thimble and 1 no. 6 amps spmcb complete with inter connection with copper wire, earthing ( box size 300 mm x 200 mm x 105 mm ) 74 supplying, installation, testing & commissioning of following wattage street light led fittings having minimum system lumens output should more than10800 & system efficacy 120 lumens / watt, ip66 protected, body made out of pressure die cast aluminium for better thermal management, power factor=0.95, thd=10%, cri=70% & cct 4000 6500 °ki / c fixing on existing pole / bracket making connection etc complete as required. 75 supplying , installation& testing & commissioning of 400 mm wall fan oscillating type with speed regulator with string, aerodynamically designed & balanced blades complete with all accessories i / c connection, testing, commissioning etc. as required. 76 earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required. 77 providing and laying earth connection from earth electrode with 6 swg dia g.i. wire in 15 mm dia g.i. pipe from earth electrode including connection with g.i. thimble excavation and re filling as required. 78 providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required. 79 supplying, installation, testing and commissioning of decorative cast iron based with gi tube pole of height 4 m above the ground level powder coated with die cast aluminium embellishments, provided with oval / rectangle shape service window with sleeve type window cover the lower part of the pole with proper stengthening to the cutout of the door opening and base plate duly welded and fixed at bottom of pole at concrete pedestal. base plate is fixed with cast iron having 2 part one part height is 625mm from base plat ground level & second part 90 100 mm dia, ( thickness minimum 4 mm with 32 amps heavy duty connector shall be inbuilt into the pole ( a ) heavy duty 4 way connector and 6 amp mcb ( b ) 50 mm diameter dwc pipe for each cable entry / exist pipe length is upto 3.5 mtr. ( c ) wiring upto the light fixture from the junction box using 3 core x 1.5 sqmm flexible isi marked copper wires. 80 supplying & fixing of 4 nos. 20mm dia x 450mm longh gi foundation bolt ( en8 grade ) with nuts, washer including 2 nos. template of 4mm thick size 240mm x 240mm with 4 nos. 20mm dia holes, to match with pcd of pole base plate as reqd. ( for 4mtr. pole ) 81 providing and laying in position 1:2:4 reinforced cement concrete foundation of size 450 mm. ( l ) x 450 mm. wide and 800 mm. deep i / c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm. dia 860mm long ( approx ) 8 nos. and 4 nos. reinforcement ring of cold twisted bar of 8mm dia 1800mm ( ns ) equally distanced in length of vertical bar as reqd. with positioning of foundation bolts ( as per item below ) and providing 40 mm. ( o.d ) dwc, hdpe pipe of 0.3mtrs 82 sitc of surface / recess mounted round / square led downlighterhaving minimum system lumens output 1500 & system efficacy 100 lumens / watt and colour temperture of 4000 6600 kelvin, cri =80%, having power factor=0.95, thd =10%etc. complete as reqd. 83 credit / buyback i / c dismantling for old dismantle material as & where basis etc complete as reqd. 84 old assorted copper / aluminium wire 85 old assorted light fitting 86 old assorted 5 / 6amp modular / piano type switch & socket 87 old assorted 15 / 16amp modular / piano type switch & socket 88 old assorted 1200 ceiling fan 89 old assorted 300mm exhaust fan 90 old assorted bollard fitting 91 old assorted post top fitting 92 old assorted size steel conduit...

Due Date : February 09, 2023

Tender Value : ₹ 12.05 Lakhs

View Tender
44
Delhi University - Delhi

35982983 tender for minor electrical work to be carried out in lab no.211 ( f.f ) pmb department, sdc university of delhi wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required.2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 3 wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required.2 x 4 sq. mm + 1 x 4 sq. mm earth wire 4 wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required.4 x 16 sq. mm + 2 x 6 sq. mm earth wire 5 supplying and fixing of following sizes of medium class pvc conduitalongwithaccessoriesinsurface / recessincluding cutting the wall and making good the same in case of recessed conduit as required.25 mm 6 supplying and fixing of following sizes of medium class pvc conduitalongwithaccessoriesinsurface / recessincluding cutting the wall and making good the same in case of recessed conduit as required.40 mm 7 supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5 / 6 a switch 8 supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15 / 16 a switch 9 supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5 / 6 a socket outlet 10 supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15 / 16 a socket outlet 11 supplying and fixingtwo module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 12 supplying and fixing modular blanking plate on the existing modularplate&switchboxexcludingmodularplateas required. 13 supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required.6 module ( 200mmx75mm ) 14 supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required.12 module ( 200mmx150mm ) 15 supplying and fixing of 3 module pvc box with modular plate having 1 no.25 amp tiny trip mcb and 1 nos of 25 amp switchi / c making connection etc as reqd 16 s / f of single box type fitting complete with all accessories i / c making connection etc as reqd.tmc 501 1xt led 22w p3242 i / c having 1 nos of stellar 20 watt led tubelight in the existing fitting as reqd. 17 s / f of 600mmx600mm led fittings for fall ceiling structuretype rc 380 g3 hlof 32 watts, 3400 lmwith high effeciency diffuser and all acessories make philips 18 providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 a, 16 ka, tpmccb 19 supplying and fixing of following ways surface / recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs ( but without mcbs and incomer ) as required . ( note : vertical type mcb tpdb is normally used where 3 phase outlets are required. ) 12 way ( 4 + 36 ) , double door 20 supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of followingpolesintheexistingmcbdbcompletewith connections, testing and commissioning etc. as required.single pole...

Due Date : February 06, 2023

Tender Value : ₹ 2.87 Lakhs

View Tender
45
Military Engineer Services - Delhi

35906206 shifting of substation building including electrical equipments and certain allied works at cfees under ge i rnd delhi schedule `a section i building work as underis prepriced by mes based on ssr ( pt ii ) 2020 2 lump sum price workout of sch a sec i ( building work ) 3 schedule a section ii to section x are under ser no. 2.01 to 2. 10 are prepriced by mes on ssr ( pt ii ) 2020 4 lump sum price worked out by the contractor for“excavation and earth work” as listed in schedule ‘a’section ii 5 lump sum price worked out by the contractor for“sewage disposal” as listed in schedule ‘a’section iii 6 lump sum price worked out by the contractor for“road / path / hardstanding” as listed in schedule ‘a’section iv 7 lump sum price worked out by the contractor for“area drainage” as listed in schedule ‘a’section v 8 lump sum price worked out by the contractor for“internal electrification” as listed in schedule ‘a’section vi 9 lump sum price worked out by the contractor for“internal water supply” as listed in schedule ‘a’section vii 10 lump sum price worked out by the contractor forexternal electrification” as listed in schedule ‘a’section viii 11 lump sum price worked out by the contractor forexternal water supply” as listed in schedule ‘a’section ix 12 lump sum price worked out by the contractor forlightening protection” as listed in schedule ‘a’section x 13 schedule `a section xi misc items ( to be quoted by the tenderer ) 14 external electric supply 15 disconnecting electric connection and earthing of transformer floor mounting indoor type, taking out from sub station of capacity 400 kva, 11 / 433 kv loading / unloading for shifting to newly construcred sub station and installation, commissioning and testing in side sub station on floor including replacement of silica gel, centrifuging / dehydration of transformer oil and topping up of transformer oil 40 kv ( appx 20 ltrs ) , lt bushing with studes of copper, etc all as specified and directed by engr in charge. 16 disconnecting electric connection, and earthing of ht vcb panel consisting of 5 nos vcb of 400 amps 11 ka totally enclosed, dismantling, takingout, loading / unloadingsafely shifting inside newly constructed sub station and re installation, commissioning and testing ht panel rated voltage 11 kv system voltage 12 kv, 21 kv for 3 sec raputating capacity, 3 phase, 50 hz, totally enclosed floor mounted with common tinned busbar indoor type triple pole ht control panel confirming to is 3427, extandable porton horizontally / vertically isolated dust and vermin proof, horizontal draw out type with grounded neutral system including internal connection contral fuses / mcb for 1 nos incoming and 4 nos out going 400 amps, 3 phase 250 mva raputaring capacity vcb with and including: ( a ) one set of 3 phase copper bus bar air insulated ( b ) two set of 3 nos resin cast in capsulatedtwin secondary current transformer of dual ratio 100 50 / 5 amps andacuracy class 0.5 for metering and 5p10 for protection of suitable burden for protection as well as metering. ( c ) electronic numirical self powered programeable type idmt non directional shunt trip relay 3 for over current protection with setting 50 200% and one for earth fault protection with setting 20% to 80%. 2 set. ( d ) led indicating lamps in specified colours for on / off condition of vcb, vcb triping on fault, trip circuit healty with push button, spring charging condition, breaker isolation position, breaker in service position. ( e ) internal wiring of the switch gear with control fls pvc insulated multi stranded flxible copper conductor cable not less than 2.5 sq mm including control breakers / fuses, dc / ac on / off switch thermostate and space heater illumination lamp. 17 ( f ) any civil work required for the installation of the system. ( g ) 96 mm square dia digital volt meter with three way on / off in built selector switch aux supply 110 volts. ( h ) 96 mm square ct operated digital amps meter with three way on / off in built selector switch aux supply 110 volts. ( j ) installation / fixing to panel obtained from existing panel as under including testing, connecting ( i ) one set of 3 phase 400 amps air insulated tinned copper bus bar with insulated colour coding. ( ii ) one set of side frame for housing for circiut breaker carriage. ( iii ) one set of mechanical interlock and automatic shutter gear. ( iv ) five nos400 amps triple pole 250 mva rupturing capacity vacuun circuit breaker with automatic drop out and manually operated spring closed mechanism operating by 230 volt 50 hz single phase electric motor of suitable rating complete with contacts, close / neutral / trip switches, closing coil, test / isolation switches with internal connections and fully confirmed to is 13118, trunk type mechanically on / off indicator, and degree of protection ip 4x. ( v ) one circuit breaker carriage complete with self contained raising & lowering mechanism for isolation purpose ( vi ) potential transformer 11 / 110 volts, 3 phase including connection etc. ( vii ) cable boxes suitable for ht 11 kv xlpe 3 core cable upto 120 sq mm either side. ( viii ) data logger and associated mf digital meters for real time data monitoring including refixing the same with previous configuration in consultation with oem. 18 disconnecting lt panel and earthing indoor type floor mounted for shifting / replacement and supply and fixing / installation in new sub station bldg, fabricated with 2 mm thick crca sheet duly cpri approved, both side openable and size ( 3.5x2x1 ) meters, indoor type 3 phase and neutral 4 wire 440 volts cubical type duly powder coating painted having busbar chamber and separate compartment for out going / incoming with and including copper bus bar of cap 1500 amps 4 nos on apoxy insulator 1100 volt grade, panel shall be mounted minimum frame 300 mm height from gl, copper internal wiring / connection with and including for following accessories incomming ( a ) 4 pole, 800a, electrically operated, drawout type 433v, 800a, air circuit breaker, microprocessor based released for over load, short circuit and earth fault protection, adjustab;le type with icu = 100% of ics of 50ka breaking capacity. ( b ) copper busbar 1500a tpn duly screwed. ( c ) multification meter varf type i.e. volts, current, power factor, power, minimum 3 line display and rs 485 port of communication, and having featureof storage of data of last minmum three months. 02 nos ( d ) led indications for r y b on off trip ( e ) suitable provision to receive incoming from transformer. 19 outgoing ( a ) mccb 415v, 400 a, 4 pole, 35ka, 50hzwith complete accessories 03 nos ( b ) mccb 415v, 250 a, 4 pole, 35ka, 50hz with complete accessories 01 no ( c ) mccb 415v, 200 a, 4 pole, 25ka, 50hz with complete accessories 11 nos ( 02 spare ) ( d ) mccb 415v, 160 a, 4 pole, 25ka, 50hz with complete accessories 02 nos ( e ) mccb 415v, 125 a, 4 pole, 25ka, 50hz with complete accessories 02 nos ( f ) mccb 415v, 100 a, 4 pole, 25ka, 50hz with complete accessories 03 nosnote: the lt panel drawing shall be approved by the accepting authority before placing order of lt panel board. 20 s&f shock treatment chart ( prescribed under i.e. rules ) dully aluminium framed with glass and supported from back with hard board with supply of all material, labour and t&p etc for proper completion of work. ( front size 900 mm x 600 mm ) 21 supply & fixing first aid box as approved by indian red cross conforming to is 2217 22 supply and fixing of co2 fire extinguishers 4.5 kg cap complete in all respect isi : 15683 marked 23 supply and fixing of abc fire extinguishers 4 kg cap complete in all respect isi : 15683 marked 24 supply and fire point with shade and accessories like as bucket, fire bitter, fire hook, digging tool, bucket stand made of ms angle suitable for with four nos fire buckets of 9.5 ltrs capacity etc complete all as specified and directed. 25 s&f fabricated cubical type sign board with including ms channel with transperant acrylic sheet with letters enbosed like mes sub station cfees including grouting fixing on ground with the help of angle iron of size 2 mtr x 1.5 mtrs x 20 cm and 02 nos led tube light 20 watts with lamps connection and flexible wire of required length complete all as directed. 26 m&l for boring of holes under road, pavement hard standing by trenchess techonology using ultra sound technique / manually / mechanically and necessary machine including supply and laying of 150 mm dia hdpe / gi pipe complete all as specified and directed by engineer in charge. 27 taking down of old unservisible cable of size 400 / 300 sqmmcable from soft / hard soil in trenches / under hard stand including excavation / labour / necessary t&p and refilling the same with pcc morter ( 1:4:8 ) complete all as specified and directed. 28 taking down of old unservisible cable of size 240 / 185 / 120 sqmm cable from soft / hard soil in trenches / under hard stand including excavation / labour / necessary t&p and refilling the same with pcc morter ( 1:4:8 ) complete all as specified and directed. 29 supply and fixing of ht / lt route indicator made of cast iron and length not less than 600 mm long including pcc foundation and all connected items complete all as specified and directed. 30 taking down of old unservisible cable of size 95 / 70 / 50 sqmm cable from soft / hard soil in trenches / under hard stand including excavation / labour / necessary t&p and refilling the same with pcc morter ( 1:4:8 ) complete all as specified and directed. 31 external water supplym&l for cutting the existing 50 mm dia gi pipe and inserting t reducer of size 50 / 25 mm including all necessary fittings and fixtures all as specified and as directed. 32 material and labour for construction of valve pit of brick masonry of size ( 750x750x750 mm ) internal dimension complete with internal plaster in cement mortar 1:4, angle iron, 3.15mm thick ms sheet cover and locking arrangementincluding excavation and earth work and pcc1:3:6 type with provision of two coat of synthetic enamal paint over one coat of red oxide primer complete all as specified and as directed. 33 internal electrificationm&l for point wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq mm frls pvc insulated copper conductor single core cablein surface / recessed steel conduit, with modular switch, modular plate suitable gi box and earthing the point with 1.5 sq mm frls pvc insulated copper conductor single core cable etc. as required and including taking down point wiring 34 m&l for wiring for power point with 4 sq mm frls pvc insulated copper conductor single core cablein surface / recessed steel conduit, with modular switch, modular plate suitable gi box and earthing the point with 4 sq mm frls pvc insulated copper conductor single core cable etc. as required and including taking down point wiring 35 supply and fixing in two module stepped type electronic fan regulator, step type, two module 120 watt 230 volt and making all necessary connections complete all as specified and directed. 36 supply and fixing of led tube light along with fixture 4 feet, 20 watt led indoor industrial crca ms box type luminaire complete with led retrofit t8 polycarbonate tube and making all electric connections with twin core pvc insulated, multistranded copper conductor flexible cable 1.5 sqmm including taking down old unserviceable light fitting etc complete all as specified and directed complete all as specified and directed. 37 supply and fixing of led tube light along with fixture 2 feet, 10 watt led indoor industrial crca ms box type luminaire complete with led retrofit t8 polycarbonate tube and making all electric connections with twin core pvc insulated, multistranded copper conductor flexible cable 1.5 sqmm including taking down old unserviceable light fitting etc complete all as specified and directed complete all as specified and directed. 38 m&l for earthing with galvanised iron earth plate electrode 600 x 600& 6 mm thick buried directly in ground ( earth pit not less than 2.25 metre deep below normal gl ) with top of earth plate not less than 1.5 metre below gl connected to gi earth strip 25 x 4 mm connected to earth plate electrode by means of gi nuts, bolts & washers earth wire protected with & including 40 mm dia light grade isi marked gi pipenot less than 7.5 metre long all as shown in electrical plate no 3 of mes schedule part i, with & including; pcc 1:3:6 type c1 pit with cover of rcc 1:2:4 b1 reinforced with welded steel wire fabric not less than 4 kg per sqm watering arrangements with 20 mm gi medium grade pipe isi marked , gi funnel with gi mesh, filling with mixture of common salt & charcoal, necessary excavation and earth works in any type of soil, including test point, testing & commissioning, complete. 39 supply and fixing 1400 mm sweep ceiling fan metal body 300 rpm with down rod and all connected acseeories complete all as specified and directed. 40 supply and fixing of surface / recess mounting vertical type12 way 240 v, spndistribution board of sheet steel dust protected duly powder painted inclusive of 200 a tinned copper bus bar common neutral link earth bar din bar for mounting mcbs ( but without mcbs and incomer ) as required. 41 supply and fixing ofmcb 6 amps to 32 amps sp 10 ka c series complete all as specified and directed 42 supply and fixing ofmcb 63 amps spn, complete all as specified and directed 43 supply and fixing led security light fitting of 45 watts with 32 mm bore gi pipe bend shape not less than 1.2 mtrs 2 nos claimp with nut, bolt washer etc and fixed on wall upto 2 floor building complete all as specified and directed. 44 supplying and fixing 2 module socket, 3 pin 5 / 6 amps gi box alongwith modular base & cover plate for modular socket in recess etc complete. 45 supplying and fixing 2 module socket , 3 pin 15 / 16 amps gi box alongwith modular base & cover plate for modular socket in recess etc complete. 46 internal water supplys&fcp jet spray with tube 1.20 metre long single symphonic ewc complete all as specified and directed....

Due Date : February 22, 2023

Tender Value : ₹ 80.68 Lakhs

View Tender
46
Ministry Of Micro Small And Meduim Enterprises - Delhi

35903393 bids are invited for miscellaneous work a electrical lab 1 1 electrical wiring for machines / light / fan / exhaust / split a / c, and 3 phases power – approximate area 166 sqft 10. nos 2 ms junction box & pvc pipe conducting 12 nos 3 providing and fixing of switch & socket 5 / 16 amp. 20 nos 4 earthing pit and earth wire 1 job nos. 5 pvc vinylflooring and self levelling / repair old floor with finishingand then laying of vinyl floor 185 sqft 6 lab no. 2 shifting door width increase wall dismantling and new chokhat and flush door making 1 nos. 7 providing and fixing of led dawn lighter light provision 600 x 600panel light with control switch on wall at directions of site in charge / engineer 4 nos. 8 grid fall ceilings as par approved with site in charge / engineer lab 180 sqft 9 providing and laying plaster on wall ½’ ratio:4:1 rate are includes scaffolding and all necessary equipment 495 sqft 10 providing and fixing of acrylic emulsion paint on wall and wall putty 590 sqft b electrical lab 2 1 electrical wiring for machines / light / fan / exhaust / split a / c, and 3 phases power approximate area 166 sqft 10 nos. 2 ms junction box & pvc pipe conducting 12 nos. 3 providing and fixing of switch & socket 5 / 16 amp. 20 nos. 4 earthing pit and earth wire 1 nos. 5 pvc vinylflooring and self levelling / repair old floor with finishingand then laying of vinyl floor 180 sqft 6 in lab provision of water supply and drain line 1 job nos. 7 providing and fixing of led dawn lighter light provision 600 x 600panel light with control switch on wall at directions of site in charge / engineer lab 4 nos. 8 grid fall ceilings as par approved with site in charge / engineer lab 166 sqft 9 providing and laying plaster on wall ½’ ratio:4:1 rate are includes scaffolding and all necessary equipment 400 sqft 10 providing and fixing of acrylic emulsion paint on wall and wall putty 575 sqft c chemical lab 1. partition 12 mm thickness of pre laminated particle board with wooden frame ( 15x8 ) & grid fall ceiling....

Due Date : February 14, 2023

Tender Value : ₹ Ref. Documents

View Tender
47
Municipal Corporation - Delhi

35784321 tender for supply installation testing commissioning of 40 hp ( 02nos. ) electric pump sets with all allied equipment and accessories at newly buildup pump house in seelampur under snz in mcd. supply installation testing and commissioning of 40 hp electric pump set horizontal end suction pumps with non clog impeller having delivery upwards to handle storm / sewage water. the pumps should be in standard construction having ss impeller , stainless steel shaft and casing design of pump should be such that the pump losses are minimum, economical in cost and easy to maintain. all rotating parts shall be statically and dynamically balanced to ensure vibration less operations after erection. the pump should be coupled with suitable horizontal tefc electric squirrel cage induction motor mounted on common m.s base frame / plate through a pair of flexible coupling m.s guards etc. the 40 hp motor hall be horizontal in design, foot mounted construction for operation on 3 phase, 415 volts 10% 50 c / s , a.c supply having continuous rating and f class of insulation discharge =440 m³ / hour head =15 mtr rpm = 1450 hp of motor =40hp 2 supply and fixing of b series anti vibrating spring foot mounting pad for 40 h p pump set. 3 supply anf fixing of 300 mm dia for header line ( 9.5 mm thick ) m.s black pipe heavy duty conforming to is:1239 part 1 ( 1990 ) 4 supply and fixing of 300 mm dia ( 25 mm thickness ) m.s flange with required nut bolts and packing sheet etc complete as required. 5 supply and fixing of 300 mm dia ( 8 mm thick ) , length 0.75 mtr m.s bend . 6 supply and fixingof 300 mm dia ( 25 mm thickness ) m.s blankflange 7 supply and fixing of of 150 mm dia m.s black pipe heavy duty ( c class ) conforming to is:1239 part 1 ( 1990 ) 8 supply and fixing of 150 mm dia non rising spindle sluice valve of ci body with wedge, bronze ring confirming to is 14846 & ss is: 6603 ( isi marked ) , pn 1.6 ci 9 supply and fixing of150 mm dia swing type non return valve of ci body with door, bronze to rubber rings confirming tois5312 10 supply and fixing of 150 mm dia ( 12 mm thickness ) m.s flange with required nut bolts and packing sheet etc complete as required. 11 supply and fixing of 150 mm dia ( 8 mm thick ) , length 0.5 mtr m.s bend . 12 supplyof corrugated & chequered rubber mat having thickness 25 mm and size in 1m x 2m. 13 sitc of pillar box size900mmx 450 mmx 250 mm suitable for mounting incomer of 250 a mccb / main switch 4 pole and energy meter 3 phase complete with eleethoypic grade aluminium bus bar of size 25mmx19mm mounted on galvanized ms body power coated pilferage proof smc door duly welded with ss with rain com size 40 mmx 40 mmx 5 mm x600mm height in cutting 300 mm height below grand and covered with shade proof smc sheet of 3 mm as required. 14 sitc of 50 hp fully automatic star delta motor starter in sheet steel enclosure type mn with spp feature i / c connection etc. complete as required. 15 sitc of 4 pole 320 amp off load side handle change over switch conforming to is: 13947 ( part i & iii ) in sheet steel enclosure i / c connection etc. complete as required. 16 supplying, installing, testing and commissioning of following capacity tpn tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with tpn disconnector fsu and hrc fuses, connections, earthing etc. as required ( a ) 200 amp 17 315amp 18 supply of 70 sq mm x3.5 core xple / pvc insulated & pvc sheathed ( heavy duty ) armoured alluminium conductor power cable for working voltage 1.1 kv confirming is7098 / 1554 ( part i ) as reqd 19 supply of 95 sq mm x3.5 core xple / pvc insulated & pvc sheathed ( heavy duty ) armoured aluminium conductor power cable for working voltage 1.1 kv confirming is7098 / 1554 ( part i ) as reqd 20 supplying and installing following size of perforated painted with powder coating m.s. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with m.s. suspenders including bolts & nuts, painting suspenders etc as required 100 mm width x 50 mm depth x 1.6 mm thickness 21 225 mm width x 50 mm depth x 1.6 mm thickness 22 supplying and installing following size of perforated painted with powder coating m.s. cable trays tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with m.s. suspenders including bolts & nuts, painting suspenders etc as required100 mm width x 50 mm depth x 1.6 mm thickness 23 225 mm width x 50 mm depth x 1.6 mm thickness 24 supplying and making end termination with brass compression glandandaluminiumlugsforfollowing sizeofpvcinsulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required3.5x70 sqmm ( 38mm ) 25 3.5 x 95 sq. mm ( 45mm ) 26 providing and laying in position cement concrete 1:2:4 ( 1 cement: 2 coarse sand :4 graded stone aggregate 20 mm nomical size ) in foundation of pump set including form work etc as reqd. 27 earthling with g.i earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc ( w / o charcoal / coke and salt ) as reqd. 28 providing and fixing 25 mm x5 mm g i stripstrip at 0.50 meter below ground as strip earth electrode including connection / termination with nut bolt spring washer etc as reqd. ( jointingshall be done by overlaping and with 2 sets of brass nut bolt and spring washer spaced at 50 mm ) 29 sitc of the new vacuum pump of 5 hpmodelwith indus 3 phase motor or equivalent vacuum pump of size 40x40 mm with standard fitting as per manufacturer size 40 mm g i pipe with all fittings nipple elbo union gate valve 40mm size for each pump for chargingcapable of priming of main pump set and evacuation of air from suction pipe and chamber. 30 wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size ms box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required.group c 31 wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed steel conduit as required.2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 32 2 x 4 sq. mm + 1 x 4 sq. mm earth wire 33 supplying and fixing metal box of 150 mm x 75 mm x60 mm deep ( nominal size ) on surface or in recesswith suitable size of phenolic laminated sheet coverin front including providing and fixing 3 pin 5 / 6 asocket outlet and 5 / 6 a piano type switch, connections, painting etc. as required. 34 supplying and fixing metal box of 180 mm x 100 mm x 60 mm deep ( nominal size ) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5 / 6 a & 15 / 16 a socket outlet and 15 / 16 a piano type switch, connections, painting etc. as required 35 supplying and fixing following way, single pole andneutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper busbar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthingetc. as required. ( but without mcb / rccb / isolator ) 8 way, double door 36 supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, “c” curve, miniature circuit breaker suitablefor inductive load of following poles in the existingmcb db complete with connesingle pole 37 double pole 38 supply of xlpe insulated pvc sheathed al. conductor armoured cable for working voltage upto 1.1kv confirming to is 7098 of following sizes: 2 x 10 sq.mm 39 sitc of 100 w led flood light luminiare fitted with lens, madeof pressure die cast aluminum housing & toughened glass cover complete with the following specification as reqd. ( a ) total system wattage = 90watt+ / 5% ( d ) luminaire efficacy>=100 lm / w ( e ) power factor>=.95 ( f ) protection class ip 66 40 p / fhot press sheet mouldedcompound ( smc ) fire retardant ( temp. resistance up to 200 c ) , ip 55 weather proof polebox of innerdimension 2000x160x98mm ( ns ) complete with suitable arrangment for fixing of1nosof 6 to 32 amp single pole mcb & 63 amp. doublepole isolator ( mcb / isolator excluded ) withneutral link duly shorting on din channel with2 nos of ms clamps with ss back plateofsuitable size with danger monogram property printed on the coveretc asreqd. ( without mcb ) 41 supply, installation, testing and commissioning of 1200 mm sweep, bee 5 star rated, ceiling fan withbrush less direct current ( bldc ) motor, class of insulation: b, 3 nos.blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value ( cmm / w ) minimum 6.85, air delivery minimum 215 cmm, 350 rpm ( tolerance as per is : 374 2019 ) , thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c ( max. ) , insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac supply, earthing etc.complete as required. 42 sitc of surface mounting led luminaire suitable for 1x20 watt led rating box type complete with extruded aluminium batten prewired with high efficient leds with the following: a ) total system wattage 20 ±5% wattb ) luminaries effucacy = 100 lumens / watt c ) power factor = 0.95 43 steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates and for making ms mesh at sumpwell and bar screen 44 supply of heat resistant flameretardant pvc insulated industrial grade copper conductor ( unsheathed ) flexible cables of 35 sqmm single core 45 supply of250 mm ( 10 inch ) sweep 1250 rpm exhaust fan fresh air type complete with shutters blades etc as reqd 46 installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.upto 450 mm sweep 47 laying and fixing of one number pvc insulated and pvcsheathed / xlpe power cable of 1.1 kv grade of following sizeon wall surface as required. hume / metal pipe 48 above 35 sq. mm and upto 95 sq. mm...

Due Date : January 30, 2023

Tender Value : ₹ 21.13 Lakhs

View Tender
48
Department of Higher Education - Delhi

35781059 bids are invited for earth work in excavation by mechanical means at all kinds of soil , supplying and filling in plinth with sand under floors , demolishing cement concrete manually , filling available excavated earth , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , steel reinforcement for rcc work including straightening, cutting, bending, placing in position and binding all complete upto plinth level thermo mechanically , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in positionandbinding , centering and shuttering for columns, piers, abutments, pillars, posts and struts foundations,footings and bases for columns , centering and shuttering for columns, piers, abutments, pillars, posts and struts columns, piers, abutments, pillars, posts and struts , centering and shuttering for columns, piers, abutments, pillars, posts and struts lintels, beams, plinth beams, girders, bressumersandcantilevers , centering and shuttering for columns, piers, abutments, pillars, posts and struts weather shade, chajjas, corbels etc., including edges , brick work with common burnt clay f.p.s. , providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing andreinforcement , reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves,chajjasetc. , reinforced cement concrete work in walls , providing and laying autoclaved aerated cement blocks masonry with 150mm or 230mm or 300 mm thickaacblocks , cement plaster of 12 mm thickness , cement plaster of 15 mm thickness , providing, hoisting and fixing above plinth level up to floor five level , supplying and fixing rolling shutters , extra for providing mechanical device chain and crank operation for operating rollingshutters , kota stone slab flooring over 20 mm , kota 1 58rollingshutters , kota stone slab flooring over 20 mm , kota tounplasticised , providing and fixing on wall face unplasticised rigid pvc rainwaterpipes , making plinth protection 50mm thick of cement concrete 1 isto 3 isto 6 over 75mm thick bed of dry brick ballasth. , providing and laying at or near ground level factory made kerb stone , providing and laying in position cement concrete of specifiedgrade , providing and fixing fly proof stainless steel grade 304 wire gauge , painting with synthetic enamel paint of approved brand and manufacture to give an even shade , providing and fixing glazing in upvc window and ventilator shutter and partition etc. with beading , providing and fixing 50 mm thick puf roof pannel with 0.5 mm precoated galvanised iron profile sheets . , rewiring for light point fan point exhaust fan point call bell point , wiring of circuit for 2 x 1.5 sq mm plus 1 x 1.5 sq mm earth wire , wiring for circuit for 2 x 2.5 sq mm plus 1 x 2.5 sq mm earth wire , wiring for circuit for 2 x 4 sq. mm plus 1 x 4 sq. mm earth wire , wiring for circuit for 2 x 6 sq. mm plus 1 x 6 sq. mm earth wire , supplying and fixing 5 by 6 a switch , supplying and fixing 15 by 16 a switch , supplying and fixing 3 pin 5 by 6 a socket outlet , supplying and fixing 6 pin 15 by 16 a socket outlet , supplying and fixing bell push , supplying and fixing stepped type regulator , supplying and fixing blankingplate , supplying and fixing modules gi box alongwith modular base and cover plate 3 module 100 mmx75 mm , supplying and fixing modules gi box alongwith modular base and cover plate 6 module 200 mmx75 mm , supplying and fixing modules gi box alongwith modular base and cover plate 8 module 125 mmx125 mm , supplying and fixing modules gi box alongwith modular base and cover plate 12 module200mmx150mm , providing and fixing 100 a, 16 ka,tpmccb , providing and fixing 250 a, 16 ka,tpmccb , providing and fixing 12 way 4 plus 12, double door , providing and fixing 12 way 4 plus 36, double door , supplying and fixing of mcb of single pole 16 32 , supplying and fixing of mcb of double pole 20 32 , supplying and fixing of mcb of triplepole25 32 , supplying and fixing 06 32 a double pole mcb , supplying and fixing 40 63 a double pole mcb , supplying and fixing 10 32 a tp pole mcb , supplying and fixing 40 63 a tp pole mcb , supplying and fixing dp mcb enclosure with sheet steel including earthing etc. as required , supplying and fixing of 47 wattt watt led , supply, installation, testing and commissioning of 1200 mm sweep, bee 5 star rated, ceiling fan , supply, installation, testing and commissioning of following exhaust fan heavy duty, 230volts, single phase ac supply exhaust fan with 960 rpm , supplying of one number pvc insulated and pvc 2 58rpm , supplying of one number pvc insulated and pvc sheathed xlpe power cable of 4c x 25 sq.mm. , supplying total quantity : 22816...

Due Date : January 24, 2023

Tender Value : ₹ Ref. Documents

View Tender
49
Delhi Jal Board - Delhi

35598820 tender for electrification of je ( e / m ) store malviya nagar. , s / o 20w led batten light. make: bajaj / havells / crompton , s / o 70w led street light. make: bajaj / havells / crompton , s / o 300 mm size exhaust fan.make:havells / orient / crompton , s / o 1200 mm size ceiling fan.make:havells / orient / crompton , s / o pvc / xlpe insulated ( heavy duty ) electrical cable for working voltage up to and including 1100 volts to is:1554 ( part i ) 1988 / 7098 ( part i ) with aluminum conductor isi marked power cable aluminum for size 10 sq.mm 2 core armored cable. make: havells / polycab / any djb approved make. , wiring for light point / fan point / exhaust fan / call bell point / with 1.5 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with piano type switch, phenolic laminated sheet, suitable size ms box and earthing the point with 1.5 sq. mm frls pvc insulated copper conductor single core cable etc. as required. , wiring for circuit / sub main wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required. 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire. , wiring for circuit / sub main wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc conduit as required. 2 x 4 sq. mm + 1 x 4 sq. mm earth wire. , supplying and fixing following modular type switch / socket on the existing switch box / cover including connections etc. as required.5 / 6 a switch. , supplying and fixing following modular type switch / socket on the existing switch box / cover including connections etc. as required.6 pin 15 / 16 a socket outlet. , supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. , installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length ( up to 30 cm ) with 1.5sq. mm frls pvc insulated, copper conductor, single core cable etc. as required. , laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. , supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 12 way, double door. , supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.single pole. , supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. double pole. , supplying and fixing of 32 mm dia x 2.00 meter long g.i. pipe ( medium class ) bracket for mounting of fluorescent / hpmv / hpsv street light fitting on pole including bending the pipe to the required shape, 2 nos. 40 mm x 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required. , providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required....

Due Date : January 11, 2023

Tender Value : ₹ Ref. Documents

View Tender
50
Military Engineer Services - Delhi

35583751 repair / maintenance of dg sets of various capacities, servicing and maint of eot crane and repair / maintenance of sewage pumps, sewage treatment plant and connected misc e / m items / works at anand parbat mil stn under ge ( north ) delhi cantt 10. comprehensive maintenance of dg sets & amf panel of make as mentioned against each dg sets below including preventive maintenance checks of engine and alternator for trouble free function as per recommendation and attending break down / complaint as and when on required basis, monthly maintenance on regular basis complete with preventive maintenance ( b check ) twice a year including replacement of engine oil / coolant, replacement of required necessary spares and replacement of all types of filters, belts along with rectification of minor defects and cleaning of air filters / breather, coolant tank with blower and labour for filling / topping up and tuning of engine for dg set as listed below complete all as specified and directed. note : the rates quotedagainst for ser item no 1.01 to 1.07items shall be applicable for a period of 01 month. 2 40 kva dg set 01 nos ( location: ranjith hall, make: crompton greaves ) 3 62.5 kva dg set 01 nos ( location: bapa nagar pump house, make: kirloskar ) 4 62.5 kva dg set 01 nos ( location: map ph ii pump house, make: greaves power ) 5 100 kva dg set 01 nos ( location: map ph i pump house, make: jackson / kirloskar ) 6 125 kva dg set 01 nos ( location: amar vihar, make: greaves / kirloskar ) 7 160 kva dg set 01 nos ( location: klp area, make: cumins / stamford ) 8 200 kva dg set 03 nos ( location: deepak vihar, make: greaves power ) 9 notes: ( a ) after monthly maintenance, the work to be certified by je ( e / m ) / engr in charge on job card. ( b ) cost of materials and labour as mentioned in below are not included with comprehensive maintanance. ( c ) the comprehensive maintenance of work shall be done through respective oems or their authorised dealers. ( d ) the contractor shall carry outroutine checking of the complete dg sets and rectify the minor / major defects noticed immediately.if complaints were not attended within one hours a penalty of rs 500 per fault per hour shall be imposed over contractor and shall be deduct from his dues. ( e ) contractor has to carry out monthly maintenance with examination of suction and exhaust valves for smooth operation of dg sets. ( f ) contractor shall be responsible to monitor the followings of alldg sets during comprehensive maintenance andthe cost of same is deemed to be included in the quoted rate: ( i ) examination and cleaning of fuel injection, nozzles. ( ii ) check clearance of suction and exhaust valves and adjust if required, ( iii ) changing of oil filters, fuel filters screen filters assy. ( iv ) maintenance of coolant level all as directed by the engineer in charge. ( v ) change of hydraulic governor oil ( vi ) change of oils ( vii ) clean alternator winding in position by forced air and internal surfaces lubricate de & nde bearings ( viii ) tightining of all nut bolts. ( ix ) greasing of all points. ( x ) test ir value of alternator winding and recording the readings ( xi ) checking of any leaking in fuel & oil lines and rectification of the same. ( xiii ) any other check as reqd for efficient running of equipment all as specified & directed by engr in charge. ( xiv ) the rates quoted against the above mentioned items is deemed to be included for cost of labour, cost of t & p requiredfor replacement of unserviceable parts and cost of handling / transportation of defective item to & from civil workshop for repair if required. spares shall be measured and paid separately under respective items.supply only items labour cost is deemed to be included in this item. ( xv ) in case of break down, the additional manpower if required will be arranged by the contractor. the cost of the same are deemed to be included in the quoted rate. 10 supply only in replacement of v belts for radiator fan / main shaft / cam shaft for the dg set of capacity 40 kvato 200kva as per existing size and model complete all as specified and direceted. 11 supply only in replacement of fuel filters for the dg set of capacity 40 kva to 200kva as per existing size and model complete all as specified and direceted. 12 supply only in replacement of oil lub filters for the dg set of capacity 40 kva 200kva as per existing size and model complete all as specified and direceted. 13 supply only in replacement of air filters for the dg set of capacity 40 kva 200kva as per existing size and model complete all as specified and direceted. 14 supply only in replacement of lubricant oil ( 15w40 ) for the dg set of capacity 40 kva 200kva as per existing size and model complete all as specified and direceted. 15 supply only in replacement of coolant for the dg set of capacity 40 kva 200kva as per existing size and model complete all as specified and direceted. 16 s&f in repairs rewininding with super enamelled copper wire of existing size & insulating the field coil assembly, replacing bentec assembly ofthe self starter assembly 12 / 24 voltsand refixing the same after repairs andtesting complete all as specified. 17 s&f in replacement ofself starter assembly 12 / 24 volts existing size and model andtesting complete all as specified. 18 s&f in repairs lead acid batteries of 12 volts, 110 150 ah, 22 28 plates, maintenance free type including accesories like terminal clamps, copper cable of required size and length, petroleum jelly and baterry initial charging all as specified and as directed. make exide / amar raja / luminious / hbl 19 s&f in repairs battery charger capacity 6 / 12 amp, 12 / 24 voltsfor dg set complete all as specified and directed. 20 m&l for carring out repairs to 12 / 24volt dynamo by replacement of carbon brush, electronic regulator, rectifier, windings, bearings reassembling the same and testing complete all as specified and directed. 21 s&f in replacement aganist repairs of stop solenoid / shut off valve of capacity 40 to 200 kva dg sets of existing make along with screen filterincluding wiring connecting to panel circuit, starting and testing on load complete all as specified and directed. 22 s&f in repairs of thermostat element alongwith complete assy for dg set connection and testing complete all as specified and directed. 23 m&l for repairs and calibration of pt fuel pump as per the calibration procedure and norms as per manufactures guide linesfor dg set of various capacity from40 to 200kvaincluding replacement of worn out and unserviceable o rings / shutt off valve / plungers complete all as specified and directed. 24 s&f in replacement of control assembly fordg set capacity40 to 200 kvawith necessary modification to controll wiring, replacement of controll relays, programming with all the parameters for safety protection and running suitable for the existing dg sets. . 25 s&f in replacement of necessary control wiring for making the auto / manual mode condition of the existing dg sets 40 to 200 kva complete all as specified and directed. 26 s&f in replacement ofautomatic voltage regulator ( avr ) suitable for dg set of 40 kva to 200 kva capacity including taking out old unserviceable avr and making all connection, testing for smooth operation complete all as specified and directed. 27 s&f in replacement of magnetic pickup sensor suitable for 40 200 kva of exist makedg set connecting with panel circuit, starting and testing on load complete all as specified and directed. 28 s&f in replacement of oil pressure sensor suitable for 40 200 kva of make exist dg set connecting with panel circuit, starting and testing on load complete all as specified and directed. 29 s&f in replacement of coolant tempetaruresensor suitable for 40 200 kva of make exist dg set connecting with panel circuit, starting and testing on load complete all as specified and directed. 30 dismantaling the unserviceable radiator from dg set of capacity 40 to 200 kva of exist make andtransporting to contractors workshopfor locating the fault and overhauling & cleaning using air compressor, de scaling with acid, removal of leakage including soldering and welding, brazing as required and renewal of gaskets, nuts, bolts, mounting pads, hoses, clamps, clips, etc. and refixing / reassembling its original position after making proper connections, aligning, testing including transporting back the same to site complete all as specified and directed.note : the rates quoted by the contractor shall deemed to include thereplaced spares / parts, transportation cost from site of installation to contractors repair workshop and back. 31 cleaning of diesel tank of various capacity dg set inside / out side oftank complete with drain out dhpp ( n ) and cleaning tank and applying two coats of synthetic enamel paint ( 1st grade quality ) on out side of tank including necessary weldings and refilling the dhpp ( n ) & testing complete all as specified and directed. 32 s&f in repairs of electronic timers with auxilary voltage of 110 / 240 / 415v 50hz for operation of 12 120 secs complete all as specified and directed. 33 s&f in repairs of speed control units 40 to 200 kva dg stes of exist makecomplete all as specified and directed. 34 s&f in repairs auxilary control contactors side mounting add ons ( 1no+1nc ) as per existing capacity at respective site complete all as specified and directed. 35 s&f in replacement of new power contactor of capacity 360 amp 4 pole, 415 volts with side mounting, mcx type auxilary contacts operable at 220 v, 50hz including taking down ofdefective power contactor from amf panel complete all as specified and directed. 36 s&f in replacement of 3 phase digital multi function meter with suitable accessories and fixing arrangements complete all as specified and directed. 37 s&fin replacement of selector switch suitable for 415 volts complete all as specified and directed. 38 s&fin replacament of led type phase indicator to be fitted on panel ( r, y , b as per site requirement ) as per existing model / capacity including taking down of old unserviceable one complete all as specified and directed. 39 s&f in replacment of digital typevoltmeter 0 500volts with selector switch, 3 phase, complete all as specified and directed. 40 s&f in replacment repairs of digital type ammeter 0 200 / 300 amps with 3 nos ct coils and selector switch, 3 pohase complete all as speicified and directed. 41 s&f in replacement for alarm system with complete wiring complete all as specified and directed. 42 s&f in replacment of dg setdoor lock and key assembly suitable for exit dg set doors as per existing model complete all as specified and directed. 43 removal of rusted ms sheet at any portion of canopy and supply and fixing of 3.15 mm thick ms sheet of size 300 mm x 300 mm with fitting / welding as specified and directed. 44 m&l forpainting two coats of synthetic enamel paint of existing colour at site over a coat of red oxide primer for dg sets complete body surfaces complete all as specified and directed. 45 m&l for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground ( earth pit not less than 2.25 meters deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead by means of bolts, nuts, check nuts and washer of galvanised iron strip 32 x 6mm as earth lead as shown in electrical plate no. 3 of ssr part i connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft / loose soil, returning filling, disposal od surplus soil, earth pit in pcc 1:3:6 type c 1 using 20mm graded crushed stone aggregate pit, funnel, 20mm bore gi tubing medium grade for watering pipe, 40mm bore medium grade gi pipe for protection of gi earth strip and pre cast earth pit cover 50mm thick made of rcc ( 1:1.5:3 ) type a1 duly reinforced with 8mm dia tmt bar @ 100 mm c / c both ways, one lifting handle made out of 10mm dia tmt bar 250mm long embedded in cover slab and cover, wire, copper lugs etc mesh, charcoal and common salt in alternate layer of 15 cm thick including taking down old unserviceable one complete all as specified and directed. 46 repair of earth pit including required exacavation, earth work and pcc work to make good damaged / disturbed surfaces of earth pit chamber & making new pit cover of rcc 1:2:4 type b 1 using 20mm graded crushed stone aggregate reinforced and lifting handle on rcc cover with 8mm ms bars at 150 mm centre to centre both ways including supply & fixing of wire mesh and funnel including re connection of earth wire / strip with panel / transformer using gi nut, bolts & washer complete all as specified & directed 47 m&l for repair / maint / overhauling long travel mechanism with lubrication lt wheel & gear box, over hauling hoist mechanism with reduction gear box, over hauling cross travel mechanism with gear box, testing & commissioning 5 ton eot crane, replacement of defective any minor parts complete all as specified and directed. 48 m&l for painting of complete eot crane with golden yellow colour paint including writing letters or figures ( block, roman, italic or indian ) n exc. 30 cm high with synthetic enamel paint as per colour scheme all as specified ( make rockwell ) 49 m&l for replacement of pvc flexible cable 1.5 sqmm 16 core copper wire complete all as specified and directed. 50 m&l for replacement of rotary geard limit switch ratio 48:1 complete all as specified and directed. 51 m&l for replacement of lever type limit switch complete all as specified and directed. 52 m&l for replacement of e.m brake ( 200mm ) coil 415v, ac complete all as specified and directed. 53 m&l for replacement of lubrication gear oil no.68 complete all as specified and directed. 54 m&l for replacement of current collector shrouded busbar type complete all as specified and directed. 55 m&l for replacement of 3 pole power contactor type ml4 type complete all as specified and directed. 56 m&l for replacement of hydraulic thrustor brake 300mm 34kg complete all as specified and directed. 57 m&l in replacement of damage ct shaft made out of en8 material medium carbon steeloff size in 80mm x 500mm with various step and key way slot 12mm both side on shaft complete all as specified and directed. 58 m&l in replacement of spherical roller bearing off suitable size complete all as specified and directed. 59 comprehensive maintenance inclding preventive and periodical maintenane and servicing of ro systems complete 03 nos, i.e.500 lph 01 no & 2000 lph 02 nos capacity. make of eukawa & ion exchange with connected motors, upvc pipe lines, butterfly valves, multi port valves etc, respectively, including servicing / cleaning of all filters / back wash etcin reliable safe and efficient condition through oem by periodically examining, preventive maintenance of plants, pipe lines, valves for trouble free function as per recommendation and attending breakdown / complaint as and when on required basis, maintenance on regular basis complete with preventive maintenanceincluding replacement of upvc pipes ( different sizes ) short lengths upto 5 mtrs, fittings, flanges with nut and bolts, pressure gauges, replacement of required necessary fittings alongwith rectification of defects complete all as specified and directed.all as directed. notes : ( i ) the contractor shall carry out routine checking of the complete plants and rectify the any defects noticed immediately ( iii ) treated water tds should be maintained less than 100mg / l and as directed, submit he monthly water test report of treated water. ( iv ) the rates quotedagainst for this item shall be applicable for a period of 01 month. ( v ) rates quoted aginst the above mentioned work wise items are required of efficient working of plant are to be included in the job . ( vi ) unserviceable and consumable parts will be measured and paid seperately unde relevent items as mention in below. ( vii ) if complaints were not rectified within 04 hrs of intimation, the following penalities will be imposed and deducted from contractors dues : ( a ) rs 1500 / per complaint for not attending the complaint and keeping pendig 04 hrs to 12 hrs / per complaint. ( b ) rs 3000 / per complaint for not attending the complaint and keeping 12 hrs to 24 hrs / per complaint. 60 replacement in repairs membrane high pressure, 500 lph.make dow / hydronautics / csm 61 replacement in repairs membrane high pressure, 2000 lph.make as per sample 62 replacement in repairsfor sediment ( sand and silt ) , dirt and rust particles, high efficiency, low pressure drop, removal up to 5 micron filter cartridges suitable 500& 2000lph capacity makes as per existing all as specified and directed. 63 replacement media in sand filter ( gravel, pebbles & fine sand ) complete all as specified and directed. 64 replacement activated carban in barban filter complete all as specified and directed. 65 supply only ro antiscalent high ph for membrane cleaner / water treat ment chemical complete all as specified and directed. 66 replacement in repairs rotameter suitable for 500 / 2000lph capacity ro system. make as per sample. 67 replacement in repairs of upvc pipe 20 to 40 mm dia with fitting complete suitable for ro systemas per sample. 68 replacement in repairs of membrane housing suitable for 500 lph capacity ro system of eukawa make .as per sample 69 replacement in repairs of membrane housing suitable for 2000 lph capacity ro system of ion exchange make .as per sample 70 replacement in repairs of housing bowl suitable for 500 & 2000 lph capacity ro system, make .as per sample. 71 replacement in repairs of lt relay, 230v ac supply suitable for 500 & 2000 lph capacity ro systemmake .as per sample. 72 s&f in reapirs of multi port valves fixing at sand filter and carbon filter vessles all as specified and directed. makes as per sample. 73 s&f, testing and commissioning high pressure pumps for ro plant, vertical type having speed 2780 rpm, 230 v, 2hp, class f insulation, eff 76% complete with fixing necessary accessories including taking down old unserviceable deposit to store yard complete all as specified and as directed. make : cri / crompton / kirloskar. 74 s&f, testing and commissioning self priming regenrative pumps for ro plant, mini star model having speed 2780 rpm, 230 v, 1hp, class b insulation, size 25x25mm, head 6 45 mtrs, dis range 50 lpmwith fixing necessary accessories incl taking down old unsv deposit to store yard complete all as specified and as directed. make : cri / cropmton / kirloskar. 75 s&f in repairs for rotational moulded polyethylene water storage tanks100 ltrs capacity ( cylindrical vertical with closed top in white colour transparent type for using antiscaling chemicals for ro plants ) hoisted and fixed in position all as specified and directed. 76 m&l for disconnection electrical and water connection of the raw water feed monoblock pumpset with motor and base plate and transporting to work shop opening carefully and rewinding the burnt out winding, replacement of bushes, gland packing, ball bearing, rubber gasket nut and bolt and replacing the required spares parts as per existing complete re fixing its in original position and making out all electrical and water connection and testing complete all as specified and directed for the size / capacity of motors upto3 hp.note : rate includes transportation of motor from the place of installation for repairing and reinstalling the same on existing foundation & testing & commisioning. 77 m&l for disconnection electrical and water connection of the high presuure feed pump, multi stage centrifugal type and transporting to work shop opening carefully and rewinding the burnt out winding, replacement of bushes, gland packing, ball bearing, rubber gasket nut and bolt and replacing the required spares parts as per existing complete re fixing its in original position and making out all electrical and water connection and testing complete all as specified and directed for the size / capacity of motors upto3 hp.note : rate includes transportation of motor from the place of installation for repairing and reinstalling the same on existing foundation & testing & commisioning. 78 s&f in repairs for antiscalant dosing unit capacity upto 6 lph @ 3.5 bar including inlet and outlet flexible pvc pipes all as specified and directed. 79 s&f in repairs pressure gauges for monitoring of flow meters all as specified and directed. ( makes as per sample ) 80 testing of treated water of stp and submission of detailed test report to the office of the engr in charge and testing in govt approved laboratory as approved. ( a ) carrying out minimum essential testing of water as per is 3025mandatory for chemical, odour, ph value tss bod cod residual chlorine total nitrogen, sulphate, oil and grease ammonical nitrogen ( nh3 n ) and bacteriological total collifrom organisms as below: rest of the characterstied of the treated water shall be as per is : 3025note 1 rate quoted shall deemed to be included for : ( i ) cost of sterilised bottle as required ( ii ) to and fro transportation charges for collection of sample 81 ( i ) tss: < 10 mg / ltrs 82 ( ii ) bod : < 10 mg / ltrs 83 ( iii ) cod :< 150 mg / ltrs 84 ( iv ) ph : 6.5 8.5 85 ( v ) total coliform : , < 100 mpn / 100 ml ( desired nil ) 86 ( vi ) residual ci > 1 mg / ltr 87 rest of the characterstied of the treated water shall be as per is : 3025 88 note 2 rates quoted shall deemed to be included for : 89 ( i ) cost of sterilised bottle as required 90 ( ii ) to and from transportation charges for collection of sample 91 note 3 in case contractor fails to provide monthly test report, a penalty of rs 3000 / per test report shall be recovered from the contractor dues. 92 testing of sewage sludge water as per revlevant is of stp and submission of detailed test report to the office of the engr in charge and testing in govt approved laboratory as approved by ge ( a ) carrying out minimum essential testing of sewage water as per revlevant is mandatory for chemical, odour, ph value tss bod cod total nitrogen, sulphate, oil and grease ammonical nitrogen ( nh3 n ) and bacteriological total collifrom organisms and other charaterstics as per relevant is of sewage water: note 1 rates quoted shall deemed to be included for : ( i ) cost of sterilised bottle as required ( ii ) to and fro transportation charges for collection of sample 93 supply & mixing of sodium hypo choloride having 10% content complete all as specified and directed. 94 supply & mixing of poly aluminium choloride 100% purity complete all as specified and directed. 95 supply & mixing of poly electrolite 100% purity complete all as specified and directed. 96 supply & filling compressor oil 460 complete all as specified and directed. 97 material and labour in replacement of quartz silica sand 32 64 grade complete all as specified and directed. 98 material and labour in replacement of quartz silica sand 16 32 grade complete all as specified and directed. 99 material and labour in replacement of quartz silica sand 8 16 grade complete all as specified and directed. 100 material and labour in replacement of quartz silica sand 4 8 grade complete all as specified and directed. 101 material and labour in replacement of activated carbon iv 1000 complete all as specified and directed. 102 material and labour in replacement of feb ( mbbr ) media suitable for stp make as per sample. 103 taking out complete pebbles from the bottom upto the depth of 0.6 mtr of the filter of size 1800 mm dia and 2300 mm height and refilling the same pebbles after washing and cleaning thoroughly. 104 periodical cleaning of sewage well as capacity ( upto 5mtrs dia and 9 mtrs depth ) cum and removing of settle down sewage sludge cum mud / de silting etc. all as required at site anddirected atanand parbat mil stn ( klp location, map ph i ) and cod area. note: the rate quoated by the tenderer is deemed to be included in the unit rate of the following : 105 diesel driven pump set of appropriate capacity not less than 5 / 7.5 hp with operatorincluding necessary pol required at site for de watering of sewage septic water including pvc heavy duty flexible hose pipe for suction and delivery purposes 106 tractor mountedstorage tank of appropriate capacity not less than 1 kl with driver directly collected from the soak well and disposing the same to the location out side of military contonement where as approved by pcb and also liase with delhi muncipal corporation board as directed. 107 tractor / truck with driver for disposal of sewage sludge and pol required for the same ( duly covered with necessary tarpaline ) and depositing the same to the location where approved by pcb or as directed.. 108 labour element and t&p required for removal of settled down sewage sludge / mud inside the sewage tank for scooping out from inside and below the septic / staining sewage water inside the well and lifting the same and deposited out side of military contonment and out side location as mentioned above. 109 appropriate qty of phenyle required at site for sterilization of sewage sludge being collected in the sewage tank and all as directed. 110 necessary oxygen mask, gloves, gum boot and all other safety aspects and including necessary phawda, steel bucket, manila rope etc. required at site and all as directed. 111 m&l for cleaning oftreated water tank atanand parbat at klp loaction stp of storage capacity of water 50000 gallons, filter feed tank of capacity 63 cum and chlorine contact tank of capacity 17 cum thoroughly by removing mud, grits etc from the tankby following method : 112 cleaning inner surface of tank complete by scraping with steel wire brush and and removing mud and sludge collected inside the tank manuallyat a distance not exceeding 50 mtr all as directed. 113 washing with clean water and bleaching powder mixture throughly complete tank internally and removel of left out sludge if any at site at a distance not exceeding 50mtr all as directed. 114 supply and laying including taking up galvanised steel water tubing medium grade isi marked screwed socketed joints complete with all tube fitting ( such as bends, elbow, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, threaded flanges and unions, etc ) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc., also cutting, screwing and waste and for making forged bends on piping as required at site including taking down the existing pipe line with fitting etc of following sizes: 115 80 mm dia 116 50 mm dia 117 40 mm dia 118 supply and laying mild steel water tubing heavy duty with welded joints complete with all tube fitting ( such as bends, elbow, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, flanges and unions, etc ) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc., also cutting, screwing, welding and waste end for making forged bends on piping as required at site including taking down the existing pipe line with fitting etc of following sizes: 119 40 mm dia 120 50 mm dia 121 80 mm dia 122 100 mm dia 123 supply and fixingbutterfly valves iron body screwed down high pressure with iron wheel head / long shank and cup butterfly type screwed both ends for iron pipe including taking out unserviceable valve for the following sizes: 124 40 mm dia 125 50 mm dia 126 80 mm dia 127 m&l for spray painting two coats of synthetic enameled paint of specified colour after preparation of surface and writing letters and numbers complete of complete sewage treatment plant capacity 100 cum / day with equalization tank, raw sewage pumps, mbbr reactor, chlorine tank, filter feed pump, dual media filters, rcc treated water tank, treated filter pumps, sludge drying beds, oil free blowers and accessories complete all as specified and directed. 128 m&l for disconnection electrical and water connection of the monoblock pumpset with motor and base plate and transporting to work shop opening carefully and replacement of winding, bushes, gland packing, ball bearing, rubber gasket nut and bolt and replacing the required spares parts as per existing complete re fixing its in original position and making out all electrical and water connection and testing complete all as specified and directed for the size / capacity of motors upto7.5 hp.note : rate includes transportation of motor from the place of installation for repairing and reinstalling the same on existing foundation & testing & commisioning. 129 m&l for disconnection electrical and water connection of the compressors and transporting to work shop opening carefully and replacement of spare parts bushes, gland packing, ball bearing, rubber gasket nut and bolt and replacing the required spares parts as per existing complete re fixing its in original position and making out all electrical and water connection and testing complete all as specified and directed for the size / capacity of up to 110 m3 / hr.note : rate includes transportation of compressor from the place of installation for repairing and reinstalling the same on existing foundation & testing & commisioning. 130 m&l for lifting / lowering of non clogging submersible pump and motor capacity up to 7.5 hpfrom sewage well after disconnecting electric and water connection of any make and any size capacity under any of chain pulley block or manually appropriate length upto 10m after opening the socket and pipe eplacement of winding, bushes, gland packing, ball bearing, thrust bearings, sand guard plate, gm impellers, rubber gasket nut and bolt and replacing the required spares parts as per existing complete re fixing its in original position and making out all electrical and water connection and testing complete all as specified and directed. 131 supply and fixing in reapirs of multi port valvesfixing at mediafilter vesselses for stpall as specified and directed. makes as per sample. 132 s&f in repairs for dosing unit capacity electronic metering pumps for chemiclas dosing system for stp incl inlet and outlet flexible pvc pipes all as specified and directed.makes as per sample 133 material & labour in repairs for cross arms, bracings, supports, clamps, angle iron, flats, ladders and back plates fabricated from ms structural steel sections including nuts, bolts and washers of suitable sizes including welding, bending ( cold or hot ) , drilling holes for bolts in any shape or size as indicated or directed and inclusive of two coats of aluminum paint over one coat of red oxide primer, complete all as directed. 134 m&l for diamantling, opening of automatic voltage stabilizer 200 kva rating ( 300 480 volts ) , out put 415 v including disconnecting electric connectioncomplete all as specified & directed. 135 m&l for repairs taking up deemer assembly complete by carefully by manual chain pulley block and replaceemnt of burnt wiinding coil with existingsize and gauge of copper winding wire inclduing transportation charges from site to work shop and back complete all as specified & directed. 136 m&l for replacment of motor assembly for moving of 20 kg load complete all as specified & directed. 137 m&l for replacement of carbon brush ( 03 sets of 03 nos each ) complete all as specified & directed. 138 m&l for repair of internal wiring and servicing complete all as specified & directed. 139 m&l for in repairs machine pressed precast conctete interlocking paver block with grey cement and no pigment any shape and size confirming to is 15658 2006 of 60mm thickness, m 35 grade including sand filling including dismantling complete all as specified and directed. 140 demolition of pcc in ground floor and paving not exceeding 15 cm thickness ( below or above ground level ) complete all as specified & directed. 141 m&l for broken stone boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, wateredand rammed to a true surface including demolition complete all as specified and directed. 142 m&l for sand filling under floors or in foundations including watering and consolidation complete all as specified & directed. 143 shifting and relocating of trolley mounted transformer of any capacity and ratingin aor ( i.e. kwc camp mrs area toanand parbat mil stn mrs area ) outdoor type including removing and refixingnecessary cable connections complete all as specified and directed. note: ( i ) necesary t&p complete shall be arranged by the contractor. ( ii ) during shifting process damage to any existing infrastructure, the same is make good by his own cost. 144 taking up existing di pipe sewage water pumping system line 80 to 150mm bore including fittings and relaying, jointing and testing of same in to trenches in position after cleaning and removal of scale / blockage complete for the following sizes note earth work, lead joint and rubber tyton joints shall be measured and paid separately under relevant items : 145 material and labour for di specials of any size such as tees, bends of any sizeand radius, tapers, collers, tail pieces, caps and plugs etc incl takinng down unsv complete all as specified. 146 m&l for rubber gasket joint ( tyton joint ) with jointingmaterial for di pipe of 80 to 150mm bore including taking down unserviceable complete all as specified and directed. 147 material & labour for earthing with galvanised steel earth plate electrode 60cmx 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer ofcharcoal dust and common salt filling in alternate layers and electrode connections by usinggalvanised iron strip of size 32 x 6 mm as earthing lead ( upto the body ofthe equipment ) by means ofbolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm diagi pipe connected to main switch board or main control board and gi pipe medium grade 20mm bore for watering and including funnel , wire mesh , rcc pit cover and pcc chamber pit with pcc ( 1:3:6 ) type c 2 using 40mm graded crushed stone aggregate, including excavation and earth work in any type ofsoil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate no 5 ofssr 1991 ( part i ) including testing on completion if desired earth resistance is not obtained the earthing will be redone without extra cost complete all as specified anddirected. 148 s&f earth continuity conuctor or main earth lead fixed to wall on batten or recess or chess or buried in ground drawn in conduit / pipe or fixed to the pole or any other situation for loop earthing etc as required32x6 mm dia galvanised iron strip all as per specified and directed....

Due Date : January 31, 2023

Tender Value : ₹ 24.33 Lakhs

View Tender