University Of Delhi - Delhi

34174138 tender for p/f curopean wc in c 57 and other allied work providing and laying in position cement concrete of specified grade excluding the cosi of centering and shuttering all work up to plinth level: 1:5:10 (1 cement: 5 coars sand (zone ill): 10 graded stone aggregate 40 mm nominal size) providing and fixing fly proof galvanized ms. wire gauge to windows and clerestor windows using wire gauge with avcragc width of aperture 1.4 mm in both directions wit! wire of dia 0.63 mm all complete. with 2nd class teak wood beading 62x19 mm providing and fixing white vitreous china pedestal type water closet (european type) witi seat and lid, 10 litre low level white vitreous china flushing cistern & c.p. flush bend wit! fittings & ci. brackets, 40 mm hush bend, overflow arrangement with specials of standan make and mosquito proof coupling of approved municipal design complete, includin painting of fittings and brackets, cutting and making good the walls and floors whereve required:...

Indian Army - Delhi

31322807 bids are invited for venered particle board of size 6x4 thickness 12 mm , aluminium decoraative power coated drapery rod 25 mm dia , glass sheet 6x4 thickness 3 mm , glass sheet 6x4 thickness 4 mm , glass sheet 6x4 thickness 5 mm , aluminium beading for fixing glass , aluminium door handle 100 mm , aluminium door handle 150 mm , aluminium door handle 75 mm , aluminium door stopper double headed , aluminium sheet 0.56 mm thickness , aluminium sheet 0.80 mm thickness 1.20 wide , aluminium sliding door bolt 200 mm , aluminium sliding door bolt 250 mm , aluminium sliding door bolt 300 mm , aluminium tower bolt 100 mm , aluminium tower bolt 125 mm , aluminium tower bolt 150 mm , aluminium tower bolt 200 mm , aluminium tower bolt 250 mm , ball cock for cistern , bottle trap 32 mm pvc , bottle trap 40 mm pvc , c p bottle trap 40 mm , c p bottle trap 32 mm , c p centre hole basin mixutre with connection pipe , c p centre hole basin mixutre qtr turn , c p centre hole basin mixure single lever , c p jet spray for ewc with rubber pipe 1 mtr long , c p single lever wall mixer type qtr turn , c p soap dish , c p waste coupling for steel sink 100 mm , c p waste coupling for steel sink 80 mm or 100 mm , aluminum curtain rod 20 mm , ms curtain rod power coated 25 mm , ms curtain rod power coated 32 mm , door mortice lock for vip doors , emery paper , ewc chinaware p trap , ewc chinaware s trap , ewc super constellations with cistern lid seatcover and cistern fitting complete set , ewc universal with seat cover , exterior emulsion paint oxford blue in 20 ltr drum , float valve 15 mm bore for pvc flushing cistern , floor spring double action hydraulically regulated , froasted glass sheet of size 4x4 thickness 5 mm , front glass shelf with frame tripple , galvanised ms wire cloth 0.56mm nominal dia of wire average width dia of apertur 1.40 roll of 15 mtr long , g i wire mesh cloth 0.56 mm dia optical1.18 mm 1.40 m width in 15 mtr roll long , glass shelf withframe , c p grating 125 mm , c p grating 150 mm , pvcgrating doom 100 mm , pvc grating doom waste hole 125mm , hydraully door closer universal type b size ll suitablefor door weight 35 kd to 45 kg , hydraullic floor door1 / 61for door weight 35 kd to 45 kg , hydraullic floor door total quantity : 2162...

Delhi Jal Board - Delhi

30913962 providing / fixing of ms wire mesh and allied works at north side of aeration unit at 45 mgd stp okhla....

Ministry Of Home Affairs - Delhi

28652602 bids are invited for concrete slab 50 mm (precast and fencing wall having high grade concrete with ms wire) with installed total quantity : 6942...

Delhi Jal Board - Delhi

27390036 nit no 15 ee ( sdw ) ii / ( 20 21 ) item no . 15 providing / fixing of safety ms wire mesh along by pass channel of 16 mgd stp okhla ....

Military Engineer Services - Delhi

26746814 addn / altn to ductable, package and vrf ductable type ac plants of b4 ward, dialysis centre, main lab, medical ii, iii & iv, medical board centre, chest opd, c4, c5, surgical ii & iii and comprehensive maint of vrf system, ductable a, package ac and connected items during & after defect liability period at base hospital under ge ( e / m ) base hospital delhi cantt 10 1 surface dressing n. exc 15 cm deep & getting out in soft / loose soil complete all as specified & directed. 2 excavation in trenches n.exc. 1.5m wide & n.exc. 1.5m in depth for foundations etc and getting out as in soft / loose soil complete all as specified & directed 3 m&l pcc 1:4:8 type d 2 ( using 40mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified & directed 4 earth filling under the floors using approved excavated soil including watering, ramming spreading in layers not exc 25 cm thick complete all as specified & directed. ( note : approved earth obtained from excavation will be used. ) 5 m&l brick work with sub class b bricks, straight or curved on plan not exc 6 metre mean radius, built in cement mortar 1:6 complete all as specified and directed. 6 m&l damp proof course to horizontal surface including necessary form wlork in cement concrete 1:2:4 type b 0, 25mm thick complete all as specified & directed 7 applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m followed by polythene film 150 micron thick complete all as specified & directed 8 m&l rcc 1:2:4 type b 1 ( using 20 mm graded stone aggregate ) as in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work etc complete all as specified & directed 9 s&f ms tmt bars 10mm dia & over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding withand including ms wire ( annealed ) n.less than 0.9 mm dia or securing with clips complete all as specified & directed 10 s&f mild steel tmt bars 5mm dia & over upto and including 10 mm dia in stirrups, spacers and binders and binding with and including mild steel wire ( annealed ) not less than 09mm dia or securing with clips complete all as specified & directed 11 s&f steel work in tubular trusses including special shaped washer etc as in roof trusses ( framed ) , trussed purlins, using erw or induction butt welded tubes conforming to is 1161 1979 grade st 240 including distance pieces, cleats etc complete with & including one shop coat of zinc chromate primer ( including preparation of surface ) at contractor’s workshop before fabrication complete all as specified and directed. 12 s&f steel work in tubular column, purline, rafter etc using erw or induction butt welded tubes conforming to is 1161 1979 grade st 240 including one shop coat of zinc chromate primer ( including preparation of surface ) at contractor’s workshop before fabrication complete all as specified and directed. 13 s&f mild steel plate ( plain or chequered ) , channels, square cut or notched ( ordinary and counter sunk ) forming holes with welded attachment to gi pipe in base / connections etc. complete all as specified and directed. 14 s&f mild steel bolts purpose made with hexagonal or square head one end and screwed the other or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long, dia of neck exc 12 mm but not exc 20mm, length 60cm complete all as specified and directed. 15 s&f mild steel screw bolts ( machine made ) dia of neck 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long complete all as specified and directed. 16 s&f in position pre painted galvalume aluminium zinc coating gi based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. 17 s&f pre painted galvalume aluminium zinc coating gi based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in ridge / valley gutter, roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. 18 m&l for hardcore of gauge n exc. 63 mm, using broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified & directed. 19 m&l pcc 1:2:4 type b 1 using 20mm graded stone aggregate as in sub base, finished fair & even to receive top layer etc complete all as specified & directed 20 m&l machine cut kota stone slab 20 to 25 mm thick in flooring, laid and jointed with grey cement slurry with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20mm thick screed in cement mortar 1:6 complete all as specified and directed. 21 m&l 20mm thick marble work using makarana white marble stone ( table rubbed and polished ) laid in pattern ( 10 to 15 cm wide strips between flooring ) as in floor including pointing in white cement and marble dust ( 1:2 ) to match with shade of makarana white marble shade over and including 20mm thick screed in cement mortar 1:6 complete all as specified and directed. 22 m&l 10 to 12 mm thick makarana white marble stone work in skirting / dado including pointing in white cement and marble dust ( 1:2 ) to match with shade of makarana white marble shade over and including 10mm thick screed in cement mortar 1:4 complete all as specified and directed. 23 m&l rendering 15mm thick in cm 1:6 on other than fair faces of brick work or concrete surfaces followed by a coat of 1 to 2mm thick wall care putty with sand papering, finished even & smooth complete all as specified & directed 24 m & l for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 mixed with wpc ( 1 cement :4 coarse sand ) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1 / 2:2 ( 1 cement: 1 / 2 coarse sand:2 coloured marble stone chipping 10mm nominal size ) including using colour pigment & marble powder as required in ground in panels with groove all around as per approved pattern including scrubbing and washing the top layer with wire brushes and water to expose the stone chippings complete all as specified and directed. ( note: payment for providing grooves & wpc shall be made separately under respective item of this schedule ) 25 m&l preparation of new plastered wall surfaces and applying two coats of oil bound distemper over and including a coat of alkali resistant primer complete all as specified and directed. 26 m&l for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed. 27 m&l returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25cm in soil complete all as specified & directed 28 removing excavated material ( any type soil / debris ) outside mod land and depositing where directed at a level n exc 1.5m above the starting point complete all as specified & directed 29 m&l machine cut kota stone slab 20 to 25mm thick in treads in one piece ( length will be as per the width of staircase ) laid over and including screed bed or bedding layer mortar 20mm thick in cement mortar 1:4 for laying floor finished jointed and pointed with grey cement slurry mixed with pigments to match the sheds of the slab including rubbing and mirror polishing complete all as specified and directed. 30 m&l machine cut makarana white marblr stone slab 18 to 20mm thick in riser in one piece ( length will be as per the width of staircase ) laid over and including screed bed or bedding layer mortar 15mm thick in cement mortar 1:3, jointed and pointed with white cement slurry to match the sheds of the slab including rubbing and mirror polishing complete all as specified and directed. 31 labour only for grooves over stair case trades complete all as specified & directed 32 rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified & directed 33 m&l two coats of synthetic enamel paint over one coat of red oxide primer after necessary preparation of new steel surface over 10 cm in width or girth complete all as specified & directed 34 m&l 75 mm thick pcc 1:3:6, type c 1, using ( 20mm graded stone aggregate ) as in plinth protection / hard standing and finished the surface fair & even without using extra cement, laid in panel, including filling the joints with sand mixed with bitumen in 1:1 ratio complete all as specified and directed. 35 taking down of chowkhat or frame ( without taking off shutter from frame ) area exc 1.50 sqm but n.exc 4sqm each including builder hardware fitting complete all as specified and directed. 36 s&f aluminium anodised various section powder coated as required for door / window / ventilators etc ( side hung / top hung / sliding ) including fixing and making the frames hinges to receive glass / wire gauge etc. complete including all required powder coated fittings such as peg stays, hinges type b 21 100mm long, suitable al handle, aluminium tower bolt, rubber beading, clips, locking arrangement for shutter, sealant etc complete all as specified & directed nnote: ( i ) aluminium door / window / ventilators to be fixed with cadmium plated screw not less then 300 mm c to c & sealing the joints between frames & granite / kota stone with polysulphide sealant as per the manufactures instruction. n ( ii ) lock, double action floor spring, hydraulic door closer & glass pane / pre laminated particle board for door shutter shall be paid separately. 37 s&f brass mortice lock 100mm 6 lever vertical type ( suitable for aluminium door ) with duplicate key and handle set complete all as specified & directed 38 s&f double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed 39 s&f sheet glass 4.8 mm thick ordinary quality fixed with aluminium beads in sqm n. exc 0.50 sqm in each panes complete all as specified & directed 40 m&l for prelaminated particle, board, exterior grade, prelaminated both side with decorative choice laminations 12mm thick fixed with aluminium beading to aluminium frame work frame work complete all as specified & directed 41 dismantling wall and ceiling boards ( fibre, pulp, insulation, etc. ) or insulation boards / slabs / blankets, any thickness, including cover fillets etc complete all as specified and directed. 42 dismantling of existing gi ceiling frame complete including hangers of any dia etc complete all as specified & directed 43 s&f gl powder coated frame work for seamless ceiling comprising of gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with gl cleat and steel expansion fasteners with and including ceiling section ( not exc 1.2 m length ) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. 44 s&f 4mm fully threaded ms adjustable rods ( up to 1200mm length ) with galvanised steel level clips, spaced at 1200mm centre to centre along main t, adjusting level fixed to roof slabs by means of ceiling cleats made out of gi flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 50mm long complete all as specified and directed. 45 s&f 15mm thick integral densified micro look edged eco friendly, bio safe anti microbial & anti bacterial fungae free ( suitable for hospital rh 100 product ) , light weight, calcium silicate false ceiling tiles plain with pin holes of approved texture of size 595x595mm, at any height, in true horizontal level, suspended on inter locking grid screws including cutting / making opening for service like diffusers, grill, light fittings, fixtures smoke detector etc wherever required of aerolite / armstrong and equivalent complete all as specified and directed. 46 fixing only as in repair ceiling board of any make & description of size 595x595mm complete all as specified & directed 47 s&f door closer, aluminium body hydraulically regulated, designation no. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified & directed 48 all as per srl item no 47 here in before but fixed as in repair 49 m&l machine cut granite stone slab 20mm thick dressed true and square, in one length not less opening size in door / window in jambs & cill ( provided in two layers with overlap in cill & in single layer in jamb & length will be as per the length of cill & jamb of door / windows ) , etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in mortar & over & including cement screed base 20mm thick in cm 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite slab including rubbing and mirror polishing and moulding complete all as specified & directed 50 supply only integral water proofing compound complete all as specified & directed 51 m&l for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified & directed 52 m&l for treating the back fill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface complete all as specified & directed. ( note : area of the sub structure in contact with backfill to be measured ) 53 m&l for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified & directed 54 m&l for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified & directed 55 m&l for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified & directed...

Delhi University - Delhi

25744342 fixing of sheetig above boundary wall on cr park side and second entrance adjacent to deshbandhu college alongwith repairing and fixing of ms wire mesh around edge of green ares of old porta cabins near service building...

Delhi University - Delhi

25484966 provision of ms wire gauge , water supply line , repair of cupboard , welding work at a 4 , 29 31 probyn road , university of delhi...

Delhi Development Authority - Delhi

23669713 procurement of children play equipments for children park at major dhyan chand sports complex 1 providing & fixing of maps 38 make of arihant / kompan / landscape structure / okplay / leo. having dimension: n• product area : 11.5m x 7.9m ( 37.8ft x 26ft ) n• safe play area : 13.5m x 9.8m ( 44.5ft x 32.5ft ) n• age group : 5 12 yrs n• friends at a time: 30 n• platform height: 5ft & 7ft n ntechnical specification: n n•platform: material: frp ( fiber reinforced plastic ) with anti skid surface on top. thickness: minimum thickness of 3 5 mm and side flanges of 6 8 mm thickness size: centre to centre distance 1160mm. others: ribbed structure on bottom side shape: square •brazing frame: isa 25x25x5mm or isa 40x40x5mm thick and isf 40x5mm thick which is galvanized and then duly powder coated. •clamp: made by nylon 6 material by injection moulding process which is uv stabilized and having better strength to give support to other parts. •vertical pipes: 80nb gi pipes. wall thickness as per the class of pipe used •swinging bridge: size: 2400mm material: frame 80nb gi pipes 2384 mm long and gi plated ms angles of 75x75x5mm 1020mm. planks low density polyethylene plastic in rotational molding process. roto planks in same or different colors are suspended with the help of 12mm galvanized chains & specially designed clamps made up of 16swg m.s. sheet. these chains are mounted on ‘u’ hooks. 12mm dia u hooks are welded on the inner side of the m.s. angles and other side of the u hook is grinded. •frp curve bridge 2.4mtr long: size: 2400mm material: frp ( fibre reinforced plastic ) with a minimum thickness of 3 5mm. ribs are provided at defined distance to improve strength as well as aesthetics of the bridge. •frp slant bridge 8’ long: size: 2400mm material: frp ( fibre reinforced plastic ) with a minimum thickness of 3 5mm. ribs are provided at defined distance to improve strength as well as aesthetics of the bridge. •slant bridge metal railing: double deck metal railing is combination of gi pipe frame of 20 nb and 15 nb pipes. total assembly is clamped to the vertical support pipe with the help of 100nb and 100x20 nb clamps •frp spiral slide: the spiral slide & slide platform is made up of fiber reinforced plastic ( frp ) in one piece. centre support pipe made from 80nb galvanized pipe welded to 100nb galvanized pipe. spiral slide railings consists of 20 nb hot dip galvanized pipe bended to form frame with two pairs of clamps joined together to gi pipe with ss304 graded non rusting nut bolts, made from nylon grade plastic. the roto moulded plastic bush &roto molded slim railing are inserted into the pipe frame in alternate pattern. the railing frame is bolted to spiral slide platform with 20nb gi support pipe bolted to platform at one end & clamped with special nylon clamps to railing pipe frame. •frp wave slide: wave slide chute is made up of frp. the chute has its end such as it causes safe landing of the child. the landing portion is horizontal with respect to the ground. the landing of the slide is supported by stand made up of 25nb pipe and 5mm thick ms plate with gi plating. pgmp38 maps 38 •roto slide entry: slide entry of the slide is made up of lldpe ( linear low density polyethylene ) by rotational molding process. it is attached to deck pipe with the help of 20nb gi pipes and injection molded nylon clamps. •bridge railing: railings are provided on both sides of bridge as barrier for safety purpose. it is made up of lldpe ( low density polyethylene plastic ) in rotational molding process and has a support of 20 nb powder coated gi pipes. the railing is attached to the support pipe using an injection molded nylon clamps. •frp square canopy: the square canopy is made of frp ( fibre reinforced plastic ) with a minimum thickness of 2 3 mm. the canopy is assembled from four modules and at the top flag is fixed. •frp mini tube slide: mini tube slide is made from frp slide modules and landing modules. the slide is supported with a ‘t’ support of 80 nb pipe. the ms flange with gi plating is used for fixing ‘t’ support. •roto flag: this roto flag is made up of rotational molding process which consists of lldpe mixed with uv stabilized food grade material for making it uv resistant. •net climber: the net climber is made up of 18 mm dia nylon rope attached by specially designed nylon rope clamps. the ropes are provided to the pipe frame and are fabricated from 25 nb gi pipes with 12 mm dia ‘u’ hooks.•fire men pole: this pole of the fire men is made up out of 40nb gi pipe and is made for the purpose using it as a climber. it is attached to vertical deck pipes with the help of 20nb gi pipe & specially designed nylon clamps. •frp roller slide: frp roller slide is made up of frp frp roller slide side arm have reinforced pins for assembling the rollers. roller made from lldpe material. the most attractive and enjoyable of its kind. the slide chute consists of molded plastic rollers spread over the length roller provided with nylon bush and are mounted on 12 mm dia rod and are fixed inside the slide chute. •frp ladder 5ft: size: 5 ft material: frp ( fibre reinforced plastic ) with a minimum thickness of 3 5mm. the top surface of the ladder is anti skid to avoid slippery movements. there is also provision for handrails on ladder for better grip. the ladder is supported by stand made up of 25nb g.i. pipe and 50x10mm thick flat from the bottom. •frp rock climber: central pad of rock climber is made up of frp ( fibre reinforced plastic ) . the rocks are mounted on platform and it has gradient from the ground. the ladder is supported by stand made up of 25nb g.i. pipe and 50x10mm thick flat from the bottom. •kiddies bench: this kiddie’s bench is made up of lldpe ( low density polyethylene plastic ) in rotational molding . it has been supported with a 20 nb powder coated gi pipes. the bench is attached to the support pipe using an injection molded nylon clamps. •frp ( fiber reinforced plastic ) : all the fibre reinforced plastics ( frp ) materials are processed by the hand laid process which is considered to be the best of its type. we use international quality of gel coats which is duly mixed with u.v stabilized pigment to give the required color to the product. thickness of the frp material varies from 3 mm to 5 mm as per the product. the frp material is tested for abrasion resistance & uts ( ultimate tensile test ) . •lldpe ( linear low density polyethylene ) : the roto products are manufactured using material lldpe ( linear low density polyethylene ) with uv stabilization of food grade non hazardous plastic compiled to rohs. thickness of the roto products varies from 5 mm to 8 mm as per the product. the overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. •pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 ( part 1 ) with gi thickness of 60micron. •pipe materials or class: medium duty ( b class ) & light duty ( a class ) series of pipes only. wall thickness of pipe varies according to class / series of pipe used. •powder coating: it shall be done with pure polyester raw material. dry film thickness maintained within the range of 50 70 microns. it is tested for adhesion test ( according to astm d 3359 ) with the help of cross hatch cutter instruments. •nut and bolts: galvanized / s.s. / allen bolt / button head allen bolt & nuts / nylon lock nuts are used with pvc bolt caps. all open ends of pipe been closed by gi / pvc caps for user safety against entrapment. n n 2 providing & fixing of double arc swing make of arihant / kompan / landscape structure / okplay / leo. having dimension: • product area : 3.2m x 1.5m ( 10.5ft x 5ft ) • safe play area : 4.2m x 2.5m ( 13.8ft x 8.2ft ) • ideal for : 4 14 years • friends at a time : 2 ntechnical specification: n•arc swimg frame : 6000mm long 80nb pipe bent in single piece & welded together with a flange 5mm thick & isa of 40x40x5mm to form a strong frame. the 80nb pipe is hot dip galvanized pipe conforming to is 1239 with gi thickness of 60μ. height of the frame is 2700mm. •top pipe: 50nb top pipe with two arc swing flanges welded at both its ends. pipe can withstanding torsional stress created due to swinging motion. these 50nb top pipe is hot dip galvanized pipe of length 2950mm conforming to is 1239 with gi thickness of 60μ. •seat assembly : 1 ) swing clamp assembly :swing clamps made up of two parts are joined together with m6 allen bolts along with s hook & a specially designed swing pin. the s hook is specially designed to house a bearing for smooth & noiseless swinging. the clamps are made from injection molded nylon 6 plastic. 2 ) chain: rubber dip molded swing chain of dia. 6mm & 1450mm long. 3 ) hook: s hook of dia 8mm & 145x130 triangular hook of grade ss 304. 4 ) seat :rubber seat made by natural rubber with sufficient reinforcement. •pipe materials or class: light duty ( a class ) & medium duty ( b class ) series of pipes only. wall thickness of pipe varies according to class / series of pipe used. •powder coating: it shall be done with pure polyester raw material. dry film thickness maintained within the range of 50 70 microns. it is tested for adhesion test ( according to astm d 3359 ) with the help of cross hatch cutter instrument. •bearing: bearing is self lubricated made of skf / ntn / nachi make shall be provided for smooth & trouble free movement. •pins and circlips: 12mm diameter pins shall be made from en8 material & circlip a10. •nut and bolts: galvanized / s.s. / allen bolt / button head allen bolt & nuts / nylon lock nuts are used with pvc bolt caps. all open ends of pipe been closed by gi / pvc caps for user safety against entrapment. n 3 providing & fixing of four seater arc swing make of arihant / kompan / landscape structure / okplay / leo. having dimension: n• product area : 6.5m x 1.5m ( 21.3ft x 5ft ) n• safe play area : 7.5m x 2.5m ( 24.6ft x 8.2ft ) n• ideal for : 4 14 years n• friends at a time : 4 n ntechnical specification: n•arc swimg frame :6000 mm long 80nb pipe bent in single piece & welded together with a flange 5mm thick & isa of 40x40x5mm to form a strong frame. the 80nb pipe is hot dip galvanized pipe conforming to is 1239 with gi thickness of 60μ. height of the frame is 2700mm. •top pipe : 50nb top pipe with two arc swing flanges welded at both its ends. pipe can withstanding torsional stress created due to swinging motion. these 50nb top pipe is hot dip galvanized pipe of length 2950mm conforming to is 1239 with gi thickness of 60μ. •seat assembly : 1 ) swing clamp assembly :swing clamps made up of two parts are joined together with m6 allen bolts along with s hook & a specially designed swing pin.the s hook is specially designed to house a bearing for smooth & noiseless swinging. the clamps are made from injection molded nylon 6 plastic. 2 ) chain :rubber dip molded swing chain of dia. 6mm & 1450mm long. 3 ) hook :s hook of dia 8mm & 145x130 triangular hook of grade ss 304. 4 ) seat :rubber seat made by natural rubber with sufficient reinforcement. •pipe materials or class: light duty ( a class ) &medium duty ( b class ) series of pipes only. wall thickness of pipe varies according to class / series of pipe used. •powder coating : it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50 70 microns. it is tested for adhesion test ( according to astm d 3359 ) with the help of cross hatch cutter instrument. •bearing: bearing is self lubricated made of skf / ntn / nachi make shall be provided for smooth & trouble free movement. •pins and circlips: 12mm diameter pins shall be made from en8 material & circlip a10. •nut and bolts: galvanized / s.s. / allen bolt / button head allen bolt & nuts / nylon lock nuts are used with pvc bolt caps. all open ends of pipe been closed by gi / pvc caps for user safety against entrapment. n 4 providing and fixing of multi seater see saw make arihant / kompan / landscape structure / leo. the multi seater see saw comprises four rotational seats. the lever consists of 20 nb and 80 nb powder coated gi pipes. the bearing used in this product is heavy duty nylon bush type. the stand for see saw is made using 50 nb gi pipe. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines. 5 providing & fixing of animal mgr make of arihant / kompan / landscape structure / okplay / leo. having dimension: n• product area : 2.1m dia ( 7 ft dia. ) n• safe play area : 3.1m dia ( 10.2 ft dia. ) n• ideal for : 3 12 years n• friends at a time : 5 n ntechnical specification: n n•mgr frame: mgr frame made from 40nb pipes welded together with bottom end over a circular plate meant for assembling bearing assembly. the top end of the pipe is welded with a isf & a plate for mounting the animal ( duck ) over it. the four 40nb pipe are hold together with four 25nb pipe to form a strong structure. the gi plated bowl is used to cover the top of the bearing assembly. •bearing assembly: bearing assembly with two bearings 1. ball bearing used for smooth rolling action.2. taper roller bearing take vertical thrust due to rolling moment & applied weight. the whole structure is mounted on heavy duty bearing shaft permanently lubricated with water sealant. •center support: 80nb hot dip galvanized center support pipe of length 500mm conforming to is 1239 with gi thickness of 60μ .this pipe is welded with a 150x150mm base plate at bottom for fixing the foundation angles isa & circular plate on top with od 200mm for assembling the bearing. •foot rest: foot rest made from 15nb galvanized pipe with end caps welded to two plates for minga foot rest. •duck: duck is made out of molded plastic in rotational molding process. •rotational molded products: the roto products are manufactured using material lldpe ( linear low density polyethylene ) with uv stabilization of food grade non hazardous plastic compiled to rohs. thickness of the roto products varies from 5 mm to 8 mm as per the product. the overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. •pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 ( part 1 ) with gi thickness upto 60micron. •pipe materials or class: light duty ( a class ) & medium duty ( b class ) series of pipes only. wall thickness of pipe varies according to class / series of pipe used. •powder coating: it shall be done with pure polyester raw material. dry film thickness maintained within the range of 50 70 microns. it is tested for adhesion test ( according to astm d 3359 ) with the help of cross hatch cutter instruments. •nut and bolts: galvanized / s.s. / allen bolt / button head allen bolt & nuts / nylon lock nuts are used with pvc bolt caps. all open ends of pipe been closed by gi / pvc caps for user safety against entrapment. n 6 providing & fixing of roto straight slide 2.0 mtr make of arihant / kompan / landscape structure / okplay / leo. having dimension• product area : 3.8m x 0.6m ( 12.5ft x 2ft ) n• safe play area : 4.8m x 1.6m ( 15.7ft x 5.3ft ) n• age group : 4 12 yrs. ntechnical specification: n•platform support pipe: it is 80nb hot dip galvanized center support pipe of length 1980mm conforming to is 1239 with gi thickness of 60μ •ladder frame: the slide ladder is made up of 25 nb gi pipe & the ladder hand railing is made up of 20 nb pipes respectively. •landing support: it is made from 25nb anti corrosive galvanized pipe of length 1500mm with gi coated base plates together with standard isa foundation angles to provide strong support •ladder step: it is cold formed 16 gauge gi plated sheet length 500mm & width 90mm en1176 1:1998 conforming to en1176 1:1998 the trade and riser of the ladder are designed in such a way it won’t entrap child’s foot while playing. all the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. •pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 ( part 1 ) with gi thickness of 60micron. •pipe materials or class: medium duty ( b class ) & light duty ( a class ) series of pipes only. wall thickness of pipe varies according to class / series of pipe used. •platform: it is 16 swg gi plated platform of size 500x450x60mm •roto straight slide: it is made from rotational molded material. •for roto product: the roto products are manufactured using material lldpe ( linear low density polyethylene ) with uv stabilization of food grade non hazardous plastic compiled to rohs. thickness of the roto products varies from 5 mm to 8 mm as per the product. the overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability. •powder coating: it shall be done with pure polyester raw material. dry film thickness maintained within the range of 50 70 microns. it is tested for adhesion test ( according to astm d 3359 ) with the help of cross hatch cutter instrument. •nut and bolts: galvanized / s.s. / allen bolt / button head allen bolt & nuts / nylon lock nuts are used with pvc bolt caps. all open ends of pipe been closed by gi / pvc caps for user safety against entrapment. n 7 providing and fixing of balancing bridge make of arihant / kompan / landscape structure / okplay / leo. the main frame and the spacers of the balancing bridge are made using 40 nb gi pipes. the bridge is made up of floats of molded high density polyethylene ( hdpe ) of 600 mm dia. and is kept swinging on two ms wire ropes. the bridge is kept at a height of 150 mm from the ground level. a rope of 18 mm thickness is provided overhead for the safety of children while balancing on it. the support pipe is made up of 40 nb gi pipe. to hold the float there are gi clamps of 16 swg. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines. 8 providing & fixing of stadium bench make of arihant / kompan / landscape structure / okplay / leo. having a spacious accommodating capacity of two persons the stadium bench is made in fiberglass reinforced plastic. the stands of the bench are made using 25 nb powder coated gi pipes. the flat of 50x10 is welded in the grounded level. there is a smooth finish given to the bench so that no damage is caused to the clothes of the person while sitting on it. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines. 9 providing and fixing of deluxe swing make of arihant / kompan / landscape structure / okplay / leo., the deluxe swing can easily accommodate three adults at a time. its top pipe is made by using 50 nb, while the leg support are of 40 nb powder coated gi pipes. it is provided with a corrugated pvc sheet roof. the seat frame is fabricated out of 20 nb gi pipe, while the seat is made from gi steel strips of 16 swg. the belt seat is affixed on 6 mm rubber coated gi chain. the ball bearing are mounted inside will specially designed nylon clamp. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines. 10 providing of designer stainless steel with stand 304 grade litter bin make: jindal / s.k. bin / leo / bajrang of size: 1150 x 480 mm & 80 ltr. capacity, ( complete with bin & frame ) . the size of bin is 540x350 mm in round shape and hanging in the main frame with help of clamp & cleats / fittings / nut bolts etc. main frame of bin made out 1.20 mm thick round pipe of 40 mm dia. and bin made out 1.0 mm thick sheet i / c top lid of 300 mm dia. & 1.00 mm thick of appropriate shape. 11 providing and fixing of toddler swing make of arihant / kompan / landscape structure / okplay / leo. in the toddler swing the center support is made up of 100 nb gi pipes. the horizontal bars are made up of 50 nb powder coated gi pipes. the bucket seats of the toddler swing are made of rubber with anti skid. the ball bearings are mounted inside specially designed nylon balls. the rubber seat is affixed on 6 mm thick gi chain. the seats are made with full care so that the child does not fall from it while swinging. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines. 12 providing and fixing complete belt assembly for swing including pvc coated chain, rubber belt, concealed bush bearing....

Delhi Jal Board - Delhi

23036723 supply of big size rcc pot under dd ( h ) east division at tahirpur nursery , supplying at site rcc pot big size red color with white marble chip , round shape upper dia 60 cm outer bottom dia 40 to 42 cm provide 06 nos . vertical ms wire and 03 nos . horizontal ms wire of 12 gages , 01 nos . whole in bottom good condition including gst . , supplying at site rcc pot big size 50 cm red color with white marble chip , round shape upper dia 50 cm outer bottom dia 28 to 30 cm and perpendicular height 40 to 42 cm 06 nos . vertical ms wire and 03 nos . horizontal ms wire of 12 gages , 01 nos . whole in bottom good condition including gst ....

Delhi University - Delhi

20105917 repair of the ceiling plaster, ms wire guage distempering, painting etc. at a 1 / 2 maurice nagar ...

Delhi University - Delhi

20101264 repair of the ceiling plaster, ms wire guage distempering, painting etc. at a 1 / 2 maurice nagar, university of delhi.=> open tender...

Delhi Development Authority - Delhi

20047570 tender for providing / fixing cup board, curtain rods and ms wire gauge door shutters on main gate in 97 flats. ( deposit work ) , c / o 483 ms houses in pkt i sector a 9, narela....

Delhi Development Authority - Delhi

20040242 tender for providing / fixing cup board, curtain rods and ms wire gauge door shutters on main gate in 97 flats. (deposit work), c/o 483 ms houses in pkt i sector a 9, narela.=> open tender...

Central Public Works Department - Delhi

18140325 tender for annual repair and maintenance of to 160 tiv 112 tiii 96 tii and 32 ms flats at nw moti bagh new delhi under 2q sub division dg 2018 19 sh refixing of ms wire gauze welding complaints and uplifting of gate=> short tender notice...

Central Public Works Department - Delhi

12620591 annual repair and maintenance of to type ii 925 nos type i 224 nos at moti bagh i under 1q sub division new delhi dg 2017 18 sh refixing of ms wire gauze welding complaints and uplifting of gate=> short tender notice...

Delhi Metro Rail Corporation Limited - Delhi

12423305 supply of plinth jumper, size 450mm length made of 6swg ms wire, hot dip galvanized, both end rounded and welded suitable to 6mm x 25mm ss bolt and washer 02 numbers with ss nut bolt spring washer 6x25mmquantity:  500.00...

Delhi Metro Rail Corporation Limited - Delhi

12423303 supply of plinth jumper, size 300mm length made of 6swg ms wire, hot dip galvanized, both end rounded and welded suitable to 6mm x 25mm ss bolt and washer 02 numbers with ss nut bolt spring washer 6x25mmquantity:  7500.00...

Central Public Works Department - Delhi

11865727 annual repair and maintenance of to 160 t iv 112 t iii 96 tii and 32 m s flats at n w moti bagh new delhi under 2q sub division dg 2016 17 sh refixing of ms wire gauze welding complaints and uplofting of gate=> short tender notice...

Public Works Department - Delhi

11121437 annual repair and maintenance of to children home for girls sanskar ashram dilshad garden delhi sub head providing and fixing door and ms wire gauge and other misc work,...

Central Public Works Department - Delhi

10651222 additional alteration of die flats at bapudham, new delhi dg 2016 17 sh providing and fixing ms wire mesh grill door in place of wooden wire mesh shutters...

Northern Railway - Delhi

10576022 packet of fly rail cee channel runner cum galvanised ms wire fitted with aluminium revit for curtain runner . one packet contain 150 nos....

Northern Railway - Delhi

10258209 mild steel wire galvanised soft 20 swg wrapped with ms wire of 26 swg conf to is 280/1978[with upto date amndt]to pl no 86900821...

Northern Railway - Delhi

7787173 supply of packet of fly rail cee channel runner cum galvanised ms wire fitted with aluminium revit for curtain runner of ac coaches as per sample. one packet contain 150 nos. material may be seen in lp section....

Public Works Department - Delhi

7114822 s_h supplying fabrication fixing of ms wire mesh protection gi corrugated sheet for transformer no1, r m o elect and mech services at ambedkar polytechnic at shakarpur delhi...

Central Public Works Department - Delhi

6670144 improvement of occupied qtrs of 600 and 708 gpra at sarojini nagar new delhi under 1j sub division dg 2014 15 sh providing and fixing ms wire gauge security door shutters in balance t iii and t iv qtrs...

Public Works Department - Delhi

6012617 annual repair and maintenance of to bjrm hospital jahangir puri, delhi during 2014 15 (sh p/f ms wire gauge to windows in casuality block, replacing damaged false ceiling and laying rmc near main gate and fixing of aluminium door in labour room)...

Public Works Department - Delhi

5085589 providing ms wire mesh fencing for protection of substation no.ii (dhobi ghat) at g.b. pant hospital new delhi....

Public Works Department - Delhi

4731065 maintenance of various eandm services at mso building. (sh supplying / fabrication / fixing of ms wire mesh protection for the store of dismantle)...

Public Works Department - Delhi

4630225 maintenance of various e and m services at trade and tax department, new delhi. (sh supplying / fabrication / fixing of ms wire mesh protection, gi corrugated sheet for dg set)...

Municipal Copr Of Delhi - Delhi

2673645 providing fixing ms wire mesh at rub badarpur near graveyard pul pehladpur side in w.no. 198, cnz. ftc no.: 011/66/xl iii/d iv/...

Municipal Copr Of Delhi - Delhi

2644170 providing fixing ms wire mesh at rub badarpur near graveyard pul pehladpur side in w.no. 198, cnz. ftc no.: 011/66/xl iii/d iv/...