smoke detector Tenders in Delhi

2
National Institute Of Technology - Delhi

40696688 tender for providing & fixing of false ceiling in basement of admin building & mini campus nit delhi; 1 providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams / sqm, both side inclusive ) consisting of main t runner with suitably spacedjoints to get required length and of size 24x38 mm made from 0.30 mm thick ( minimum ) sheet, spaced at 1200 mm center to center and cross t of size 24x25 mm made of 0.30 mm thick ( minimum ) sheet, 1200 mm long spaced between main t at 600 mm center to center to form a grid of 1200x600 mm and secondary cross t of length 600 mm and size 24x25 mm made of 0.30 mm thick ( minimum ) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. main t runners to be suspended from ceiling using gi slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm gi adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main t, bottom exposed width of 24 mm of all t sections shall be pre painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by engineer in charge 2 gi metal ceiling lay in perforated tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of gi sheet having galvanizing of 100 gms / sqm ( both sides inclusive ) and 20% perforation area with 1.8 mm dia holes and having nrc ( noise reduction coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns ( minimum ) , including factory painted after bending and perforation, and backed with a black glass fiber acoustical fleece 3 providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from m.s. sheets and galvanized with zinc coating of 120 gms / sqm ( both side inclusive ) as per is : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate g.i. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to g.i. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long g.i. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c / c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the engineer in charge but excluding the cost of painting with : 4 12.5 mm thick tapered edge gypsum moisture resistant board...

Due Date : December 01, 2023

Tender Value : ₹ 21.26 Lakhs

View Tender
3
Delhi Integrated Multi Modal Transit System Limited - Delhi

40634983 tender for “comprehensive annual maintenance of fire & security with bms and fm 200 gas based fire suppression system installed in occ & data center (ref. annexure b ) at isbt, kashmere gate, delhi.” s. system description make location quantity no. 1 fire detection & alarm system a intelligent analog addressable ge occ area 1 set fire detection & alarm panel with software b mcp ge reception, occ, dc& 4 nos. back exit passage c fault isolator ge occ & dc area 3 nos. d monitor module ge occ & dc area 3 nos. e relay module ge occ & dc area 3 nos. f smoke detector ge occ & dc area + 42 nos. floor void in dc g response indicator ge occ & dc area 32 nos. h fire hooter ge occ & dc area 4 nos. i associated wiring/ cabling 1 set 2 vesda system a vesda panel ( high sensitive micra data centre 1 set smoke detector device ) including stratos 25 piping and software and integrated with fda panel b vesda power supply box hart xl occ area 1 no. c smoke sensor for vesda hart xl data centre 6 nos. d associated wiring/ cabling 1 set 3 access control system a access controller panel with spectra occ area 3 nos. software b hid i smart card reader hid occ and dc area (6 9 nos. doors) c biometric finger print recorder spectra dc area 1no. m/c d exit switch noc & ups room 2 nos. e associated wiring/ cabling 1 set 4 cctv system a cctv dvr system with lg hik vision occ area 1 no. monitor including software page 8 of 9 b dome camera capture occ& dc area 6 nos. c associated wiring/ cabling 1 set 5 pa system a pa system (amplifier and cd bosch manager room 1 no. player) b pa amplifier audio max manager room 1 no. c collar mic mipro & manager room 2 nos. shure d speaker ceiling mounted bosch occ & dc 5nos. e associated wiring/ cabling 1 set 6 wld system a water leak detection panel kidde data centre area in 1 set including detection wiring for 3 floor void zones. 7 intrusion alarm system a intrusion panel solitaire occ area 1 no. b intrusion panel keypad solitaire occ area 1 no. c motion sensor solitaire data centre/ occ 2 nos. area d associated wiring/ cabling 1 set 8 rodent repelent system a rodent repellent system maser occ area 2 nos. b rodent repellent sensor maser occ& dc area 18 nos. c associated wiring/ cabling 1 set 9 fm 200 gas based fire suppression system a fm 200 gas cylinder 41 kg kidde back side exit 2nos. passage for data centre b fm 200 gas cylinder 48 kg kidde back side exit 1no. passage for ups room c fm 200 gas cylinder 24 kg kidde noc room for noc 1no. room d fm 200 gas cylinder 68 kg kidde back side of manager 5 nos. room for occ & reception area e fm 200 gas cylinder 68 kg with kidde spare cylinders 6 nos. valve , gauge and 41 kg gas f fm 200 nozzle including piping kidde occ, dc, ups, noc 15 nos. and reception area g gas release panels ravel occ area 4 nos. page 9 of 9 h associated wiring/ cabling 1 set 10 bms system bms with zenith 14 monitor lenovo occ area 1set including software b bms panel including wiring for kidde occ area 1 set monitoring of lt panel parameters with energy meter, pac integration, temp. and rh parameters with accessories, fire panel integration, temp. & rh sensors integration, fm200 dp switch status, wld status and vesda status. c humidity sensor greystone occ 3 nos. d associated wiring/ cabling 1 set 11 ac system 1 duct able split ac 11tr including ducting, insulation, grill, dampers and diffusers. blue star occ area 1 nos 2 2.0 tr split ac blue star occ area 2 nos 3 1.5 tr split ac blue star occ area 2 nos 4 1.0 tr split ac blue star occ area 1 nos...

Due Date : November 28, 2023

Tender Value : ₹ Ref. Documents

View Tender
4
Department Of Commerceq - Delhi

40449523 tender for renovation works of gents and ladies toilet blocks at dgtr; 1 civil works as per scope of work 2 dismantling tile work in the floors and walls including stacking materials 3 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground 4 dismantling g.i. pipes ( internal work ) including excavation refilling trenches after taking pipes, manually / by mechanical means including stacking of pipes 5 dismantling of old wall hung seat and flat back half stall urinal at site complete with all operations including all necessary materials, labour and disposal of all dismantled material i.e., malba, all complete 6 providing and laying water proof treatment in sunken portion of wcs, bathroom etc., by applying cement slurry mixed with water proofing cement 7 providing and fixing chlorinatedpolyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per design. ( finolex, astral ) . 8 providing and fixing pvc pipes including all pvc fitting of approved quality, thickness, isi marked ( finolex or equivalent as per design making the joints leak proof ) 9 providing and laying in position cement concrete of specified grade excluding the cost of cantering and shuttering 10 providing and laying vitrified floor tiles with water absorption of approved make, in all colours and shades including grouting the joints with white cement and matching pigments etc., complete in all aspects. size of the tile 600 x 600 mm ( somany, kajaria ) . 11 15 mm cement plaster on rough side of single or half brick wall, applying a coat of dr. fixit and bonding agent mixed in portion recommended by manufacturer on plaster / wall surface etc complete in all aspects. 12 providing and fixing 1st quality ceramic glazed wall tiles of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by dgtr representative in skirting, risers of steps and dados, and jointing with greycement slurry, including pointing in white cement mixed with pigment of matching shade complete. ( somany, kajaria ) 13 providing and fixing 18 mm thick gang saw cut, mirror polished , pre moulded and pre polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture, joints treated with white cement, mixed with matching pigment, epoxy touch ups., including rubbing, curing, moulding and polishing to edges ti give high gloss finish etc. complete at all levels. granite of any colour and any shade area of slab up to 0.50 sqm. 14 providing and fixing of white vitreous china wall mounted type water closet ( european type ) including lid, wall plate, cistern all fitting and c.p. flush bend with fittings & c.i. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including paintings of fittings and brackets, cutting and making good of the walls and floors wherever required: ( hindware, cera, parryware ) 15 providing and fixing of white vitreous china flat back half stall urinal of size 580 x 380 x 350 mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with waste fittings, c.i. trap with outlet grating and other couplings in c.p. brass, including paintings of fittings and cutting and making good the walls and floors wherever required: single half stall urinal with 5 litre p.v.c. automatic flushing cistern, including partition of men urinal by designer toughened glass. ( hindware, cera, parryware ) . 16 providing and fixing of white vitreous china flat back under counter / over counter oval type wash basin size 550 x 400 mm with single 15 mm c.p. brass pillar tap. ( hindware, cera, parryware ) . 17 wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm fire resistance low smoke poly vinyl chloride insulated copper conductor single core cable in surface / recessed medium class pvc conduit. 18 electrical works ( including electrical fittings wherever required for new light panels / led downlighters, ceiling lights, light & power points, power & network points for computer etc. ) electrical work has to include. 19 providing & fixing of led lights 2’x2’ 20 providing & fixing of designer lights ( led downlighter ) for receptionas per design approved 21 providing and fixing c.p. brass bib cock ( isi make ) 15 mm nominal bore. 22 providing and fixing c.p. brass angle valve ( isi make ) 15 mm nominal bore. 23 providing and applying white cement based putty of average thickness 1 mm, of approved band and the manufacturer, over the plastered wall surface even and smooth complete. ( birla ) 24 finishing walls with acrylic smooth exterior paint of required shade ( two or more coat and including priming coat of exterior primer ( asian, dulex ) 25 disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including roading, transporting, unloading to approved municipal dumping ground for all leads including all lifts involved. 26 removing and refixing with p / f decorative high pressure laminated sheet of in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality including cost of adhesive of approved quality, including door locks, handles and necessary hardware. 27 providing, making & installation of false ceiling ( gypsum board + tiles ) which includes g.i. perimeter channels of size 0.55mm thick. 28 providing & fixing of wall / column panelling ( pvc or wooden or combination ) 29 supply of reception desk including draws / pedestal and side table as per design selected. 30 supply of medium back chairs made up of mesh with steel frame in color choice. 31 supply of branded / designer 5 seater sofa set. 32 supply of corner tables 33 supply of centre table. 34 supply & installation of one led full hd tv 42” 35 the design and layout of the reception area must include installation of made in india logo of gem. 36 providing & fixing of lockable toughened glass door with chokat 8x6 with duel locks 37 recessed led luminaire with polymethyl methacrylate cover. for system ceilings with exposed grids, system dimension 6” dia, harmonious light effect due to homogenously illuminated light emission. warm light colour neutral white colour along with electronic switchable ballast. 38 wiring of light / power plug with 2 x 5 sq mm frls ( fire resistance low smoke ) pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit along with 1 no 4 sq. mm frls ( fire resistance low smoke ) pvc insulated copper conductor single core cable for loop earthing as required. 39 analogue addressable multisensor photoelectric type smoke detector with base automatic analogue addressable photo smoke & thermal detector with, mounting base. the directors alarm led shall be viewable from 360 degree. the director shall have automatic. 40 supply and installation of office names boards 9’x5’ etc. 41 removing and refixing the centralised ac vent in reception area, as per advice of the service provider. 42 appropriately re fixing the smoke detection censors, wherever provided 43 removing all hanging wires, unserviceable cables and sundry items, as adviced by in charge site....

Due Date : November 11, 2023

Tender Value : ₹ Ref. Documents

View Tender
5
National Security Guard - Delhi

40425148 tender for renovation / upgradation of laboratory & duty room along with verandah of mi room at nsg camp rk puram, new delhi. ; 1 demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge. in cement mortar 2 taking out doors, windows and clerestory window shutters ( steel orwood ) including stacking within 50 metres lead 3 excavating trenches of required width for pipes, cables, etc includingexcavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : all kinds of soil pipes, cables etc. 4 brick work with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : cement mortar 1:4 ( 1 cement : 4 coarse sand ) 5 half brick masonry with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 in superstructure above plinth level up to floor v level. 6.13.1 cement mortar 1:3 ( 1 cement :3 coarse sand ) 6 extra for providing and placing in position 2 nos 6mm dia. m.s. bars at every third course of half brick masonry. 7 12 mm cement plaster of mix : 1:4 ( 1 cement: 4 coarse sand ) 8 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 ( 1 cement: 4 coarse sand ) 9 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand ( zone iii ) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources ) . 10 centering and shuttering including strutting, propping etc. and removal of form for shelves ( cast in situ ) 11 edges of slabs and breaks in floors and wallsunder 20 cm wide 12 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. thermo mechanically treated bars of grade fe 500d or more. 13 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level : 1:4:8 ( 1 cement : 4 coarse sand ( zone iii ) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources ) 14 providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand ) , joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. granite stone slab colour black, cherry / ruby red 15 extra for fixing marble / granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. 16 extra for providing opening of required size & shape for wash basin / kitchen sink in kitchen platform, vanity counter and similar location in marble / granite / stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 17 providing and fixing stainless steel a isi 304 ( 18 / 8 ) kitchen sink as per is:13983 with c.i. brackets and stainless steel plug 40 mm, including waste coupling, cp sink cock mixer, painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 250 mm 18 providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge. granite work 19 providing and fixing factory made single extruded wpc ( wood polymer composite ) solid board one side white color and other side of board laminted with pvc foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom / kitchen cabinet etc. of required sizes comprising of virgin polymer of k value 58 60 ( suspension grade ) , calcium carbonate and natural fibers ( wood powder / rice husk / wheathusk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) having minimum density of 650 kg / cum and screw withdrawal strength of 1800 n ( face ) & 900 n ( edge ) , minimum compressive strength 50 n / mm2, modulus of elasticity 850 n / mm2 and resistanceto spread of flame of class a category with property of being termite / borer proof, water / moisture proof and fire retardant and fixing with stainless steel piano hinges / soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk s.s screws, all as per direction of engineer in charge. 18 mm thick 20 providing and fixing square mouth s.w. gully trap class sp 1complete with c.i. grating brick masonry chamber with water tight c.i. cover with frame of 300 x300 mm size ( inside ) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size p type 19.4.1.1 with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 21 providing and fixing chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i / c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc.25 mm nominal dia pipes 22 providing, laying and jointing glazed stoneware pipes class sp 1with stiff mixture of cement mortar in the proportion of 1:1 ( 1 cement : 1 fine sand ) including testing of joints etc. complete : 100 mm diameter 23 providing, laying and jointing glazed stoneware pipes class sp 1with stiff mixture of cement mortar in the proportion of 1:1 ( 1 cement : 1 fine sand ) including testing of joints etc. complete : 200 mm diameter 24 providing and laying cement concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size ) all round s.w. pipes including bed concrete as per standard design : 200 mm diameter s.w. pipe 25 providing and laying cement concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size ) up to haunches of s.w. pipes including bed concrete as per standard design : 200 mm diameter s.w. pipe 26 making chases up to 7.5x7.5 cm in walls including making good andfinishing with matching surface after housing g.i. pipe etc. 27 cutting holes up to 30x30 cm in walls including making good thesame : with common burnt clay f.p.s. ( non modular ) bricks 28 providing and fixing precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm ( + 0.05 % ) total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by engineer in charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55 mm ) with epdm seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 29 providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm ( base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm ) with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws complete : ridges plain ( 500 600mm ) 30 providing and fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanising @ 120 grams per sqm including both side ) consisting of main ‘t’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick ( minimum ) sheet, spaced1200 mm centre to centre, and cross “t” of size 24x28 mm madeout of 0.33 mm ( minimum ) sheet, 1200 mm long spaced betweenmain’t’ at 600 mm centre to centre to form a grid of 1200x600 mmand secondary cross ‘t’ of length 600 mm and size 24 x28 mmmade of 0.33 mm thick ( minimum ) sheet to be inter locked at middleof the 1200x 600 mm panel to from grid of size 600x600 mm, restingon periphery walls / partitions on a perimeter wall angle pre coatedsteel of size ( 24x24x3000 mm made of 0.40 mm thick ( minimum ) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting / making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. main ‘t’ runners to be suspended from ceiling using g.i. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm g.i. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘t’, bottom exposed with 24 mm of all tsections shall be pre painted with polyster baked paint, for all heights, as per specifications, drawings and as directed byengineer in charge. sqm 1718.70note : only calcium silicate false ceiling area will be measuredfrom wall to wall. no deduction shall be made for exposedframes / opening ( cut outs ) having area less than 0.30 sqm.thecalcium silicate ceiling tile shall have nrc value of 0.50 ( minimum ) , light reflection > 85%, non combustible as per b.s.476 part iv, 100% humidity resistance and also having thermalconductivity <0.043 w / mk. 31 steel work in built up tubular ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 hot finished welded type tubes 32 finishing walls with acrylic smooth exterior paint of required shade : 13.46.1 new work ( two or more coat applied @ 1.67 ltr / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm ) 33 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :13.41.1 new work ( two or more coats ) over and including water thinnable priming coat with cement primer 34 providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 35 providing and fixing factory made upvc white colour sliding glazed windowupto 1.50 m in height dimension comprising of upvc multi chamberedframe with in built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length ( shape & size according to upvcprofile ) , appropriate dimension of upvc extruded glazing beads andupvc extruded interlocks, epdm gasket, wool pile, zinc alloy ( whitepowder coated ) touch locks with hook, zinc alloy body with single nylonrollers ( weight bearing capacity to be 40 kg ) , g.i fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardwares and drainage ofwater etc. after fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approveddrawing & direction of engineer in charge. variation inprofile dimension in higher side shall be accepted but no extra paymenton this account shall be made. three track three panels sliding window with fly proof s.swire mesh ( two nos. glazed & one no. wire mesh panels ) made of ( big series ) frame 116 x 45 mm & sash 46 x 62 mmboth having wall thickness of 2.3 ± 0.2 mm and single glazingbead / double glazing bead of appropriate dimension. 36 providing and fixing steel ( white power coated ) crescent lock for upvcsliding window / door with necessary screws etc. complete. 37 providing and fixing panelling or panelling and glazing in panelled orpanelled and glazed shutters for doors, windows and clerestory windows ( area of opening for panel inserts excluding portion inside grooves orrebates to be measured ) . panelling for panelled or panelled and glazedshutters 25 mm to 40 mm thick : float glass panes 5.0 mm thick glass panes ( weight not less than 12.50 kg / sqm ) . 38 fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading 39 providing and fixing isi marked flush door shutters conforming to is :2202 ( part i ) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneeringwith vertical grains or cross bands and face veneers on both faces ofshutters. 35 mm thick including isi marked stainless steel butt hingeswith necessary screws 40 providing and fixing bright finished brass 100 mm mortice latch and lockwith 6 levers and a pair of lever handles of approved quality with necessaryscrews etc. complete. 41 providing wood work in frames of doors, windows, clerestory windowsand other frames, wrought framed and fixed in position with hold fastlugs or with dash fasteners of required dia & length ( hold fast lugs ordash fastener shall be paid for separately ) .second class teak wood 42 providing and laying vitrified tiles in floor in different sizes ( thickness tobe specified by the manufacturer ) with water absorption less than 0.08%and conforming to is:15622, of approved brand & manufacturer, in allcolours and shade, laid on 20 mm thick cement mortar 1:4 ( 1 cement:4 coarse sand ) jointing with grey cement slurry @3.3 kg / sqm includinggrouting the joints with white cement and matching pigments etc. thetiles must be cut with the zero chipping diamond cutter only . laying oftiles will be done with the notch trowel, plier, wedge, clips of requiredthickness, leveling system and rubber mallet for placing the tiles gentlyand easily. glazed vitrified tiles matt / antiskid finish of size size of tile 800 x 800 mm 43 dismantling stone slab flooring laid in cement mortar includingstacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead. 44 providing and fixingbottle trap 40mm size with 300mm & 190mm long wall connection pipes & wall flange of make jaquar or equivalent including all complete as per direction of engineer in charge. 45 providing and fixing cpvcunion in cpvcpipe including cutting and threading the pipe and making long screws etc. complete ( new work ) :25 mm ( make suprime ) 46 providing and fixing cpvcball valve in cpvcpipe including cutting and threading the pipe and making long screws etc. complete ( new work ) 25 mm ( makes suprime ) 47 making connection of cpvc distribustion branch with cpvc / iron / aluminium line of following size by providing and fixing brass threaded cpvc / iron / alumium fitting, including cutting and threading the pipe etc. complete. 25 to 40 mm pipe 48 providing and fixingsingle lever quarter turn basin pillar cock for wash basin of make jaquar kubix prime model no kup 35001pm or equivalent oras per approved make by engineer in chargeincluding all fittings complete as per direction of engineer in charge. 49 add gst difference @6.33% on dsr amount 2825285 / 50 add cost index @ 7% only on dsr amount 2825285 / ...

Due Date : November 07, 2023

Tender Value : ₹ 15.06 Lakhs

View Tender
6
Central Public Works Department - Delhi

40276728 renovation work of room no. 313,314,316,318 and 318a, c wing at sena bhawan, new delhi. sh i pdg. ei & fans. sh ii shifting, extending of smoke detectors, sprinkler heads...

Due Date : October 25, 2023

Tender Value : ₹ 7.47 Lakhs

View Tender
7
Ministry Of Defence - Delhi

40246247 bids are invited for custom bid for services camc for preowned products 2 fire alarm control panels 58 smoke detectors 5 manual call points 5 hooters and accessories cables conduit and batteries and box as per existing system total quantity :...

Due Date : November 29, 2023

Tender Value : ₹ 1.31 Lakhs

View Tender
9
Central Public Works Department - Delhi

40046745 bids are invited for supplying installation testing and commissioning of smoke detector , supplying installation testing and commissioning of heat detector operating at 54c 57c with rate of rise cum fixed tempreature , supplying installation testing and commissioning of manual call boxes of ms construction in surface recess , supplying installation testing and commissioning response indicator on surface recess ms box , supplying installation testing and commissioning fire alarm sounder with facility to make announcement mounted in ms box 16 swg , supplying installation testing and commissioning of main control and indicating panel made out of 16 swg ms sheet , provision for supplying and laying of 2x1.5 sqmm fire alarm armoured cable 600 1000v rated with steel wire armouring and frls outer sheath complete as required total quantity : 1346...

Due Date : October 16, 2023

Tender Value : ₹ Ref. Documents

View Tender
10
Central Public Works Department - Delhi

40024979 bids are invited for supplying installation testing and commissioning of smoke detector , supplying installation testing and commissioning of heat detector operating at 54c 57c with rate of rise cum fixed tempreature , supplying installation testing and commissioning of manual call boxes of ms construction in surface recess , supplying installation testing and commissioning response indicator on surface recess ms box , supplying installation testing and commissioning fire alarm sounder with facility to make announcement mounted in ms box 16 swg , supplying installation testing and commissioning of main control and indicating panel made out of 16 swg ms sheet , provision for supplying and laying of 2x1.5 sqmm fire alarm armoured cable 600 1000v rated with steel wire armouring and frls outer sheath complete as required total quantity : 1346...

Due Date : October 16, 2023

Tender Value : ₹ Ref. Documents

View Tender
11
Department Of Tourism - Delhi

39783248 bids are invited for annual maintenance rate contract for refilling, overhauling, testing and commissioning of fire extinguishers at ihm new delhi. hydraulic pressure testing 1. hydraulic pressure testing of all type and size fire extinguishers 1 no. refilling of extinguishers 2. refilling of fire extinguishers of abc 2 kg capacity 1 no. 3. refilling of fire extinguishers of abc 4.5 kg capacity 1 no. 4. refilling of fire extinguishers of abc 6 kg capacity 1 no. 5. refilling of fire extinguishers of abc 9 kg capacity 1 no. 6. refilling of fire extinguishers of co2 9 ltrs capacity 1 no. 7. refilling of fire extinguishers of bc 4.5 kg capacity 1 no. 8. providing & fixing of horn cum discharge hose for co2 fire extinguishers complete2 kg discharge pipe 1 no. 9. providing & fixing of horn cum discharge hose for co2 fire extinguishers complete4.5 kg to 9 kg discharge pipe 1 no. 10. providing & fixing of handle and bracket for co2 fire extinguishers complete as required. 1 no. 11. providing & fixing of spares for co2 fire extinguishers rotary type valve (isi mark) 1 no. 12. providing & fixing of spares for co2 fire extinguishers al. wheel for controlling pressure 1 no. 13. providing & fixing of spares for co2 fire extinguishers safety clip 1 no. 14. squeeze grip level type valve (isi mark) for abc fire extinguishers as required. 1 no. 15. discharge hose pipe (isi mark) for abc fire extinguishers 4 kg 1 no. 16. discharge hose pipe (isi mark) for abc fire extinguishers 5 kg 1 no. 17. discharge hose pipe (isi mark) for abc fire extinguishers 9 kg 1 no. 18. pressure gauge (isi mark) for abc type fire extinguishers 1 no. 19. seal for abc type fire extinguishers as required 1 no. 20. painting of various fire extinguishers after scrapping of rust, old paint and after which painting done including paint & primer complete as per there is codes required abc 2 kg to 05 kg/ co2 2 kg to 4.5 kg 1 no. 21. painting of various fire extinguishers after scrapping of rust, old paint and after which painting done including paint & primer complete as per there is codes required co2 (6.8 & 9 kg)/mech. foam 9 ltrs/water type 9 ltrs 1 no. 22. labelling with 150mm x 240mm pvc thin film with multi colour for all type of fire extinguishers complete as required. 1 no. 23. inspection and servicing of all type of fire extinguishers installed in institute at different sites once in a month the services shall include checking of nozzles, gas cartridge, discharge hose horn, pressure etc. complete cleaning and proper installation of fire extinguishers in position and testing of fire detection and protection system per month. 1 no. 24. providing & fixing of co2 fire extinguishers (is:15683) stored pressure of2 kg capacity 1 no. 25. providing & fixing of co2 fire extinguishers (is:15683) stored pressure of4.5 kg capacity 1 no. 26. providing & fixing of co2 fire extinguishers (is:15683) stored pressure of9 kg capacity 1 no. 27. providing & fixing of abc fire extinguisher (is:15683) stored pressure of2 kg capacity 1 no. 28. providing & fixing of abc fire extinguisher (is:15683) stored pressure of4 kg capacity 1 no. 29. providing & fixing of abc fire extinguisher (is:15683) stored pressure of6 kg capacity 1 no. 30. providing & fixing of abc fire extinguisher (is:15683) stored pressure of9 kg capacity 1 no. 31. providing & fixing of mechanical foam fire extinguisher (is:15683) stored pressure of 9 ltrs capacity as and when required as required. 1 no. fire detection and alarm system part 32. supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel central processing unit with the following loop modules and capable of supporting not less than 159 devices (including detectors) and minimum 120 detectors per loop and loop length up to 1 km, network communication card, minimum 320 character graphics/ lcd display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (eprom), power supply unit (230 ± 5% v, 50 hz), 48 hrs back up with 24 volt sealed maintenance free batteries with automatic charger. the panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under sh: pa system) and shall be complete with all accessories. the panel shall be compatible for ibms system with open protocol bacnet/ modbus over ip complete2 loop panel 1 no. 33. supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. 1 no. 34. supplying, installation, testing & commissioning of addressable fire control module complete as required. 1 no. 35. supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. 1 no. 36. supplying, installation, testing & commissioning of addressable manual call point complete as required. 1 no. 37. supplying, installation, testing & commissioning of fault isolator complete with base as required. 1 no. 38. supplying, installation, testing & commissioning of intelligent addressable programmable sounder complete as required. 1 no. 39. sitc of intelligent smoke detector with mounting base complete as required. 1 no. 40. supplying & laying of 2x1.5 sq mm fire alarm armoured cable, 600/1000v rated with annealed copper conductor having xlpe insulation, steel wire armouring & frls outer sheath complete as required. make havels/polycab/finolex or equivalent . 1 mtr. fire fighting system 41. supplying and fixing of hose reel box along with 30 mtrs. rubber pipe 1’’ wrapped on the hose drum, complete with all other accessories for connection as required at site. 1 no. 42. supply and fixing of 25mm gate valve including nipples socket etc. as required at site. 1 no. 43. supply and fixing of hose box (without hose pipes) for putting hose pipe for connecting hydrant complete as required at site. 1 no. 44. supplying and fixing 63 mm dia., 15m long rrl hose pipe with 63 mm dia male and female couplings duly bound with gi wire, rivets etc. confirming to is 636 (type a) gun metal 1 no. 45. supplying and fixing 63 mm dia., 15m long rrl hose pipe with 63 mm dia male and female couplings duly bound with gi wire, rivets etc. confirming to is 636 (type a) stainless steel 1 no. 46. supplying & fixing 63 mm dia gun metal short branch pipe with 20mm nominal internal diameter size nozzle confirming to is 903 suitable for instantaneous connection to interconnect hose pipe coupling gun metal 1 no. 47. supplying & fixing 63 mm dia gun metal short branch pipe with 20mm nominal internal diameter size nozzle confirming to is 903 suitable for instantaneous connection to interconnect hose pipe coupling stainless steel 1 no. 48. providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish ul listed of fm approved complete as required. 1 no. 49. providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories pendent sprinkler 1 no. 50. providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories upright sprinkler 1 no. 51. providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories horizontal side wall sprinkler 1 no. 52. providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories concealed sprinkler 1 no. 53. supplying and fixing of two way landing valve s.s. 63mm dia for connecting hose pipe complete as required. 1 no. 54. providing and fixing of pressure switch in m.s. pipe line including connection etc. as required. 1 no. 55. supplying, installation, testing & commissioning of sprinkler flexible pipe (ul listed) of stainless steel complete with 15npt on reducer thread with max. working pressure of 175 psi test pressure of 875 psi(burst) with branch line (inlet) 25 mm npt male thread to sprinkler head (outlet) 15mm npt female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of 1000mm 1 no. main fire pumps & control panels 56. a) sitc of electrical driven terrace pump suitable for automatic operation and consisting of following, complete in all respects as required. (terrace pumps) 1 job b) horizontal type, multistage, centrifugal, split casing pump of cost iron body & bronze impeller with stainless steel shaft, mechanical confirming to is:1520. c). suitable hp squirrel cage induction motor tefc type suitable for operation on 415 volts, 3 phase, 50 hz, ac supply with ip55 class of protection for enclosure, horizontal foot mounted type with class f insulation, confirming to is 325. d) m.s. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. e). suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 mtr head total quantity : 69...

Due Date : October 03, 2023

Tender Value : ₹ Ref. Documents

View Tender
12
Indian Army - Delhi

39728401 bids are invited for boqelec beetel cordless telephone , beetel cordless adaptor input 100 to 270v 50hz and output dc 6v , beetel cli phone m 71 , nose plier , side cutter , charger for rechargeable cell 1.5v , hydrometer , cpu cooling paste , npg 59 toner canon 2006n , epson 003 ink bk c y m , epson 664 ink bk , epson 664 ink bk c y m , epson 774 ink bk , cartridge 88a , cartridge 12a , cartridge 78a , dry powder bottle 120 gm 12a and 88a , smps , vga cable , lenevo laptop power adaptor , hp laptop power adaptor , epson 3152 printer paper pickup roller , epson 3150 printer paper pickup roller , hp laser jet p1108 paper pickup roller , 1 kva ups , stabilizer 2 kva , rechargeable cell 1 5 v , charger for rechargeable cell 1 5v , wireless keyboard and mouse , pen drive 32 gb , pen drive 64 gb , modum power adaptor 12v ac adapter , led bulb 9w , led bulb 18w , zero watt bulb , insulation tape , pipe larry light , led bulb 3w , led bulb 5w , led bulb 23w , led bulb 9w thread type , led bulg 9w green , led strip light blue , led bulb 0 5w blue , led bulb 0 5w green , led bulb 0 5w multicolour , focus light led 0 5w , ceiling light , pencil cell aa , pencil celll aaa , 9v bty for smoke detector , bty c type , extension board 16a and 6a , ac amp meter 100 amps , plug 6 amp , bed switch , 5 amp male plug , 5 amp female plug , 15 amp male plug , 15 amp female plug total quantity : 653...

Due Date : September 26, 2023

Tender Value : ₹ Ref. Documents

View Tender
14
Central Public Works Department - Delhi

39385548 bids are invited for extinguishers with mono ammonium phosphate powder , supplying installation testing and commissioning of smoke detector with built in led and mounting base complete , supplying installation testing and commissioning of manual call box of abs type in surface recess with stainless steel , supplying and laying of 2x1.5 sqmm fire alarm armoured cable 600 1000v , supplying installation testing and commissioning response indicator , supplying installation testing and commissioning fire alarm sounder with facility to make announcement , supplying, installation testing and commissioning sector panel suitable for following zones, complete with visual indications , providing and fixing in position the industrial type pressure gauges with gun metal brass valves complete as required , supply and fixing 25mm dia gatevalves pipe fitting in the existing water pipe line complete etc as reqd , supplying installation testing and commissioning of main control and indicating panel made out of 16 swg ms sheet total quantity : 17396...

Due Date : September 11, 2023

Tender Value : ₹ Ref. Documents

View Tender
17
Canara Bank - Delhi

39105620 tender for vendors & standardization of rates for maintenance (comprehensive annual maintenance contract ), supply& installation, of cctv, fire alarm, burglar alarm & fire extinguishers1 network video recorder 4 channel with 01 sata hdd port and onboard poe 4 channel, compact 1u, nvr, ul/ en / eu/ ce certified. h.265+/h.264 codec decoding, max 80mbps incoming bandwidth, up to 6mp resolution preview &playback, hdmi/vga simultaneous video output, support tcp/ip upnp, onvif compatible, 1 sata iii port, up to 6tb capacity for each hdd and free programming software 2 network video recorder 8 channel with 02 sata hdd ports 8 channel, 1 u, ul/ en / eu/ ce certified. h.265+, h.265, smart h.264+ codec decoding, max 320 mbps incoming bandwidth, up to 8 mp resolution preview & playback, hdmi/vga simultaneous video output , support tcp/ip, upnp, onvif compatible, 2 sata iii ports, up to 6tb capacity for each hdd,interface 1 rj 45 port (10/100/1000mbps) 3 network video recorder – 16 channel with 04 sata hdd port 16 channel 1.5 u, nvr, ul/ en / eu/ ce certified. h.265+, h.265, smart h.264+ codec decoding, max 320 mbps incoming bandwidth, up to 8 mp resolution preview & playback, hdmi/vga simultaneous video output , support tcp/ip, upnp, onvif compatible, 4 sata iii ports, up to 6tb capacity for each hdd, interface 1 rj 45 port (10/100/1000mbps) 4 network video recorder 32 channel 04 sata hdd port 32 channel 1.5 u 16 poe, nvr, ul/ en / eu/ ce certified. h.265+, h.265, smart h.264+ codec decoding, max 320mbps incoming bandwidth, up to 8mp resolution preview&playback, hdmi/vga simultaneous video output, support tcp/ip, upnp, onvif compatible, 4 sata iii ports, up to 8tb capacity for each hdd, interface 1 rj 45 port (10/100/1000mbps) 5 10 tb ul,wd avgp series/ seagate surveillance hard disc 6 8 tb ul,wd avgp series/ seagate surveillance hard disc 7 6 tb ul,wd avgp series/ seagate surveillance hard disc 8 4 tb ul,wd avgp series/ seagate surveillance hard disc 9 2 tb ul,wd avgp series/ seagate surveillance hard disc 10 2 mp fixed dome ip ir camera ( 2mp ip network ir camera , h.265+ & h.265, h.264&mjpeg ul/ en/eu/ce certified) dual stream encoding & dwdr,1/2.7” 2mp progressive cmos, h.265+ & h.265 dual stream encoding,25/30fps@1080p(1920×1080) dwdr, day/night(icr), 3dnr, awb, agc, blc , multiple network monitoring: web viewer.2.8 mm fixed lens (3.6mm optional), max ir leds length 30m, ip67, poe 2mp ip network ir camera h.265+ & h.265, h.264&mjpeg dual stream encoding & dwdr, 1/2.7” 2mp progressive cmos, h.265+ & h.265 dual stream encoding, 25/30fps@1080p(1920×1080) dwdr, day/night(icr), 3dnr, awb, agc, blc ,multiple network monitoring: web viewer.2.8 mm fixes lence (3.6mm optional), max ir leds length 30m, ip67, poe. 12 2 mp pinhole ip ir camera ( ul/ en/eu/ce certified) 2mp ip network ir camera h.265,h.264&mjpeg triple stream encoding & wdr,1/2.7” 2mp progressive cmos, 25/30fps@1080p(1920×1080) dwdr, 3dnr, awb, agc, blc ,multiple network monitoring: web viewer.2.8 mm pinhole lense 13 1.3 mp ip ir wifi hd cube camera 1.3mp ip ir cube camera wifi 10 mtr, dwdr, h.264 & mjpeg, micro sd card slot,built in mic & speaker, mobile software: icmob,gcmob,wcmob 14 router for cube camera with micro sim card slot 3g/4g routers, network type 4g: fdd lte 3g: dchspa+/ hspa+/hspa/umts b1/b8 (2100/900 mhz),interface 3 10/100mbps lan ports, 1 10/100mbps lan/wan port, 1 micro sim card slot, wireless standards ieee 802.11ac/n/a 5ghz, ieee 802.11b/g/n 2.4ghz,frequency 2.4ghz and 5ghz 15 3 mp fisheye camera , 3 mp with mcro sd card 3mp ip network ir camera h.265+ & h.265, h.264&mjpeg triple stream encoding & dwdr, 1/2.7” 3mp progressive cmos, 25/30 fps@1080p(1920×1080) wdr, 3dnr, awb, agc, blc ,multiple network monitoring: web viewer.1.4 mm fixes lense, built in mic,• micro sd memory, ip67, poe. 16 network attached storage(nas) 1 bay nas with 1 bay, with 01 esata (if available) port, min 01 ethernet port, 02 usb(3.0) ports. max cap: 6tb (1x 6tb hdd) (capacity may vary by raid types), with provision to connect min 4 ip cameras brands: synology/netgear/equivalent 17 network attached storage(nas) 2 bay nas with 2 bay, with min 02 ethernet port, 02 usb(3.0) port raid 0, 1 and jbod supported, max capacity 12 tb (capacity may vary by raid types). with provision to connect min 4 ip cameras.brands: synology/netgear/equivalent 18 4 port poe network switch layer two commercial switch supports poe power management supports wall mount installation supports anti theft lock hole mac auto learning and aging, mac address capacity is ik supports ieee802.3, ieee802.3u and ieee802.3x standards rj45 port supports 10/100mbps selfadaptation supports 250 meters long distance poe transmission conforms to ieee802.3af and ieee802.3at power supply standard. port 1 supports hi poe 60w power supply 19 8 port poe network switch to be installed with 8 chl nvr ethernet port1*10/100 base t8*10/100 base t (poe power spuopep lpyo)w, er consumptionport1<60w, port2 8<30w, total<96w, layer two commercial switch supports ieee802.3, ieee802.3u and ieee802.3x standards mac auto learning, aging, mac address capacity is 2k supports mdi/mdix self adaptationsupport poe, poe+, hi poe adopts metal enclosure 20 16 port poe network switch with 16/32 chl nvr 16*10/100mbps ports, 1*gigabit combo port, support port auto flipping (auto mdi / mdix) port 1 2 support the maximum power of 60w, poe output total power up to 135w compliant ieee 802.3, ieee 802.3u, ieee802.3ab, ieee802.3x standards supports ieee802.3af, ieee802.3at, hi poe standards supports normal working mode, port isolation (vlan) mode, monitoring mode, network extend mode. • supports store and forward supports ieee802.3x flow control for full duplex mode and backpressure for half duplex mode 4k entry mac address table with auto learning and autoaging led indicators for monitoring power, link and activity 21 24 port poe network switch with 32 chl nvr ethernet portstwo (2) 1000 base x ports (combo ports)two (2) 10/100/1000 base t ports 24 10/100 base t ports (poe power supply, poe features• hi poe: ports 1 and 2consumption: up to 60 w per port• ieee802.3af, ieee802.3at: ports 3 to 24consumption: up to 30 w per port• enhanced poe (epoe): ports 1 to 8• total poe budget: ≤ 360 w,layer 2 managed network epoe switch •s up to 800 m (2524 ft) •supports ieee, e100, and e10 transmission modes (ports 1 to 8)•supports twisted pair and coaxial cable transmission (ports 1 to 8)•supports poe management, green poe, and legacy support 22 monitor led 18.5 18.5” surveillance grade monitor with hdmi & vga input 23 cat 6 cable cat 6, core diameter 0.585mm, 305m cca, transmission distance upto 85m, per metre 24 armoured cat 6 cable armoured cat 6, core diameter 0.585mm, 305m cca, transmission distance upto 85m), per metre 25 rack 4 u with lock and fan , for 4 & 8 channel nvr front door with toughened glass quality, adjustable mounting rails front and back, 1 fan mounting provision, top and bottom cable entry provides, optimal flexibility for cable management, easy wall mount provision, easy installation standing/wall mounting option, frame structure with max loading capacity up to 60 kg 26 rack 6 u with lock and fan, for 16 & 32 channel nvr front door with toughened glass quality, adjustable mounting rails front and back, 1 fan mounting provision, top and bottom cable entry provides, optimal flexibility for cable management, easy wall mount provision, easy installation standing/wall mounting option, frame structure with max loading capacity up to 60 kg 27 offsite atm cctv dvr with built in 7 inch screen el/un certified .tribrid: support hdcvi/analog/ip video input, high profile h.264 dual stream video compression, hdmi/vga/tv simultaneous video output, onvif version 2.3 conformance, support 2sata hdds up to 20tb, multiple network monitoring: web viewer, cms(dss/smart pss)&smart phone(dmss), built in 7 inch screen 28 hd 4 channel, hd dvr/ xvr,ul/ en / eu/ ce certified, supporting penta brid camera technologies( cvbs/hdtvi/ hdcvi/ip/analog), with 01 sata hdd support, onvif. dvr/xvr(penta brid) 4 channel with 01 sata hdd port, onvif 29 hd 08 channel, hd dvr/ xvr, ul/ en / eu/ ce certified, supporting penta brid camera technologies( cvbs/hdtvi/ hdcvi/ip/analog), with 02 sata hdd support, onvif. dvr/xvr(penta brid) 08 channel with 02 sata hdd ports, onvif 30 hd 16 channel, hd dvr/xvr, ul/ en / eu/ ce certified, supporting penta brid camera technologies( cvbs/hdtvi/ hdcvi/ip/analog), with 02 sata hdd support, onvif. dvr/xvr(penta brid) 16 channel with 02 sata hdd ports, onvif 31 2 mp hd fixed dome ir colour camera, with wdr minimum 2 mp, with glass lenses, with wdr and all in one technology ( supporting hdtvi/hdcvi/ahd/cvbc), ( ul/ en/eu/ce certified) 32 2 mp hd infrared bullet cameras with wdr minimum 2 mp, with glass lenses, with wdr and all in one technology( supporting hdtvi/hdcvi/ahd/cvbc), ( ul/ en/eu/ce certified) 33 pin hole camera with wdr ( ul/ en/eu/ce certified) minimum 700 tvl and above with wdr. fixed within a camouflaging devices such as pir sensor or smoke detectors or similar. 34 pinhole camera housing 18 swg metalbox (grey) in the shape of speaker with holes and with provision to host pinhole camera (hd/ip) view from one of the holes 35 rg 6 co axial un armoured video cable rg 6 co axial un armoured video cable, per meter 36 power cable of 2 core copper conductor 2 x 1.0 sq mm power cable of 2 core copper conductor 2 x 1.0 sq mm, per meter 37 12 v 5 amp, smps power supply for cameras 12v 5 amp 38 12v ,10 amp smps power supply for cameras 12v 10 amp 39 12 v 20 amp, smps power supply for cameras 12v 20 amp 40 pvc round conduit white colour pvc round conduit white colour, per metre 41 pvc flat conduit white colour pvc flat conduit white colour, per metre 42 wireless mouse wireless mouse 43 rj45 to hdmi extender(only where the distance between nvr/xvr and monitor is more than 60 mtr) extends hdmi signal over one cat 5e / 6 cable, max data rate 3.4 gbps, hdmi 1.3 and hdcp compliance, transmission range up to 100 meters at 1080p resolution, resolution : up to 1080p / 60 hz / 48 bits, distance : 100 mtr (max), hdmi connector : type a power supply : regulated 5v / 2amp, power consumption : 1.2 amp (max), temperature : 0 to 55 degree c. 44 hdmi cable 5mtr , 10 mtr, 20 mtr hdmi version 1.4 (high definition multimedia interface) gold plated cable provides an uncompressed digital link between consumer electronics equipment. 45 vga cable 5mtr, 10mtr, 20 mtr vga hddb 15 male to mx hddb 15 male plug cord with ferrite is a lead used for transmitting video signals. mx vga cord most commonly used to link computers with monitors. however it is now used on some high definition televisions. mx vga cable are always used solely to carry analog component rgbhv (redgreen blur horzintal sync vertical sync) vedio signal analog with data 46 poe injector( where length of 01 camera cable is more than 100 mtr) complies with ieee802.3af standard,delivers power and data over the single cable up to 100 metre, no power cabling for ethernetnetwork device,advanced auto sensing algorithmenables providing power with 802.3af ,pdsupports power classi cation,auto necessary power requirementshigh safety with short circuit protection plug & play installation, requires nocon gurationexternal 48vdc power supply 47 hdmi spltter for connecting two monitors from nvr/xvr 48 vga splitter for connecting two monitors from nvr/xvr 49 hdmi switcher 1x2( 1 outputx02 inputs) for connecting two nvrs/xvrs to single monitor 50 vga switcher 1x2( 1 outputx02 inputs) for connecting two nvrs/xvrs to single monitor 51 64 gb micro sd card 64 gb 52 128 gb micro sd card 128 gb 53 surge protector with 6 sockets ( in lightning effected/ 6 sockets 54 wired mouse wired mouse 1 smart branch security and fire alarm control panel with key pad(separate not on board) package supporting both security and fire alarm detectors 1.control panel with separate (non onboard) key pad. 2. pstn (and/or) gsm inbuilt speech dialer, cms enabled (compatible to any third party cms through pstn, gsm(gprs) & ip, minimum any two) as per bank requirement. 3. simultaneously auto dials preset numbers as well as send alerts to cms. 4. inbuilt battery back up. 5. should support and communicate alerts to any third party cms/health monitoring software,readily, and the protocol for communication should not be bound or limited to any proprietary software or protocol of their own. should communicate via sia dc 09/contact id/contact ip or any international open source intrusion protocols. 6. should support zone doubling and/or zone expanders . 7. minimum features: auto activation on groups/partition on preset time, arm/disarm through sms/ivr using secure passkeys, bypass faulty components, minimum 10 password access, provision to store logs and export to excel, health beat for health checkup monitoring software , free programming software, free mobile monitoring app. 2 key pad compatible with smart panel for replacements (of the same make as in sl no: 01 above) 3 smart atm security and fire alarm control panel with key pad(separate not on board) package supporting both security and fire alarm detectors 1.control panel with separate(non onboard) key pad. 2. ip (and/or) gsm/gprs inbuilt with cms enabled ( compatible to any third party cms through gsm(gprs) & ip, minimum any one as per bank requirement) 3. simultaneously auto dials preset numbers as well as send alerts to cms. 4. inbuilt battery back up. 5. should support and communicate alerts to any third party cms/health monitoring software,readily, and the protocol for communication should not be bound or limited to any proprietary software or protocol of their own. should communicate via sia dc 09/contact id/contact ip or any international open source intrusion protocols. 6. should support zone doubling and/or zone expanders . 7. minimum features: auto activation on groups/partition on preset time, arm/disarm through sms/ivr using secure passkeys, bypass faulty components, minimum 10 password access, provision to store logs and export to excel, health beat for health checkup monitoring software , free programming software, free mobile monitoring app. 4 key pad compatible with smart panel for replacements (of the same make as in sl no: 03 above) 5 zone expanding module 8 zone expander compatible with brand of smart panel as in sl no: 1 (and/or) 3 to go with smart panel 6 add on pstn dialer cum communicator module compatible with the brand of smart panel as in sl no: 1 (and/or) 3 to go with smart panel 7 add on ip dialer cum communicator module compatible with the brand of smart panel as in sl no: 1 (and/or) 3 to go with smart panel 8 add on gsm(gprs) dialer cum communicator module compatible with the brand of smart panel as in sl no: 1 (and/or) 3 to go with smart panel 9 conventional pstn having following basic features – min 5 telephone numbers having 16 digit telephone number, provision for min 3 messages . speech auto dialer compatible to currently installed conventional panels 10 conventional gsm speech and sms auto dialer compattible to currently installed conventional panels gsm based, 03 voice messages, min 10 telephone numbers 11 smart gsm(gprs) communicator for health monitoring of old sia dc 09/cid protocol enabled gsm(gprs) communicator for health monitoring of old conventional conventional panels panels 12 smart ethernet (ip) communicator for health monitoring of old conventional panels sia dc 09/cid protocol enabled ethernet (ip) communicator for health monitoring of old conventional panels 13 sim card with data connection package rate per year with min 1gb data, 100 sms per month 14 smart standalone fire alarm control panel with onboard keypad 2 zone smart fire panel with capacity of 20 smoke detectors per zone. metal case with pstn auto dialer. wifi cloud connectivity on android app. gsm/ip compatibility for connectivity to third party cms in future through opensource protocols.operating voltage 180 240 v with visual zone indicators mains, battery, showing fire , open, short fault, reset , zone and hooter tests, etc, push buttons to disable audio alarm with battery backup. 15 conventional sounders 4wired conventional sounders( 02 for power & 02 for tamper), min 120 db 16 sounder with inbuilt battery backup sounder with min 120db sound level, that supports the events of tamper or power cut to the sounder. having unbuilt battery backup for 24 hrs min 17 pir sensors(pet safe) pir sensors with quad linear technology, with pet immunity upto 25 kg 18 panic switches micro switch technology, auto reset button, inbuilt tamper, sturdy abs housing with stainless steel finish cover plate 19 magnetic contact metal magnetic contact small 20 vibration sensor with adjustable sensitivity sensor 21 temperature sensor secuirco/ equivalent 22 shutter sensor secuirco/ equivalent 23 uv flame detector ultraviolet flame detector 24 ldr sensor to be used inside strong room 25 glass break sensor glass break sensor 26 optical smoke detector dust proof, moth proof 27 heat detector conventional heat detector with with 360 degrees direction with min 25 degrees trigge 28 rate of rise heat detector ror with rapid rise element of temperature of 6.7 degrees to 8.3degrees centigrade increase per minute 29 response indicator for any fire detector 30 mcp for fire alarm, 31 conventional branch burglar operating voltage 180 240 v , with extendable zone indicator, capable of catering for atleast 15 alarm alarm control panel with speech auto dialer as a package sensors with battery backup. with day and night mode with key/code type operations, metal case with pstn speech auto dialer included. 32 addressable fire alarm for multi story building with two loop system microprocessor based addressable type fire alarm control panel.the panel should be equipped with sufficient numbers of loop with 20% spare capacity. four access levels, capable of auto learn devices, flash eprom sufficient numbers of programmable relay controls for controlling ahus, pressurization fans, ventilation fans at fire pump room, monitoring of fire sprinkler and fire hydrant pump, 240 volts ac power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and then be capable of operating the system for 2 hours during an emergency conditions.4. should store 2100 event with real time clock with couse and effect up to 99 grouping facility,2. inbuilt modbus facility, supports micro usb interface for pc connectivity and rs 485 communication facility for network / repeater,7. should be compatible with third party cms using its own ip module for communicating open protocols like sia dc 09 protocol or contact id . the panel should certified en 54 2 and en54 4 33 repeater panel supply of repeater panel with 128x64 dots graphics lcd display. that should display all events / detectors, devices status of complete systems. connectivity through rs 485 communication.led indications for fire & common fault modes on front panel. local buzzer indication for fire & fault. no need of separate power supply. power is drawn from main fire panel. full control of main fire panel from the repeater panel. autolearn of main fire panel provided. 34 addressable optical smoke detector addressable optical smoke detector with alarm leds and mounting base. approvals lpcb, vds,ul 35 addressable heat detector addressable optical heat detector with alarm leds and mounting base. approvals lpcb, vds,ul 36 addressable sounder/ flasher addressable hooter cum strobe. approvals lpcb 37 addressable input/ output modules i/o unit provides supervision of one or more normally open contacts connected to a single pair of cables and a set of changeover relay output contacts. approvals lpcb,vds 38 addressable addressable manual call point with key for rst manual call point purpose, approvals vniipo (all russion institute for fire protection certificate) 39 switch monitor module addressable monitor modules for sprinkler flow switch and for office etc. it is design to monitor single pole, volt free contacts like conventional devices. approvals lpcb,vds 40 zone monitor module zone monitor with isolator powers and controls the operation of a zone of up to 20 orbis . in build bidirectional short circuit isolator approvalslpcb, vds 41 addressable flame detector the intelligent base mounted uv flame detector is d esigned to protect enclosed indoor areas where open fires may be expected. the detector has a fast acting response to flames up to 25m away and is equipped with a single uv sensor with a narrow spectral response in order to discriminate between flames and most spurious sources of radiation 42 battery 12v 7 ah 43 acrylic sticker ( 1ft x 1 ft) with “emergency call police” printed in red on it for panic button in atm to be fixed below the panic button of atm burglar alarm.panic button can be fixed in the center/above/below the sticker as per convenience. 44 shutter guard gsm based, with built in battery and built in hooter gsm based , hooter in built, in built 3.7v lithium ion battery, alert through call, sms and inbuilt hooter alarm*, led indicators for charging & activity, minimum 5 phone number for alerts, programble entry/exit delay time, passcode protected 45 cash cabin alarm with magnetic contact and beep sound to alert the cashier when the cash cabin door is open. with/without inbuilt battery. delay adjustable. 46 ultrasound pest repellent ultrasound pest repellent with or without inbuilt battery 47 armored cable 2 core 1.5 sq mm, isi marked for fire detectors 48 cable of 2 core copper shielded 2 x 1.0 sq mm, flexible wire. (not regular or armoured) for siren and switches of intrusion alarm 49 cable of 4 core copper shielded 4 x 0.5 sq mm, flexible wire (not regular or armoured) for pir, vibration sensor and incoming power supply for panel 50 pvc round conduit white colour 51 black conduit 52 surge protector 6 sockets with 6 sockets ( in lightning effected/ heavy power fluctuations areas ...

Due Date : September 01, 2023

Tender Value : ₹ Ref. Documents

View Tender
18
Military Engineer Services - Delhi

38972508 addn / altn / improvement to classroom and provn of smoke detector at dit at subroto park under ge ( af ) subroto park, delhi cantt 10...

Due Date : August 24, 2023

Tender Value : ₹ 1.03 Crore

View Tender
19
Central Public Works Department - Delhi

38764591 bids are invited for sitc of led emergency light twin beam as per boq specification , providing and fixing of isi marked aluminium body 4.5 kg capacity ofco2 as per boq specification , providing and fixing of isi marked fire extingushersmap 90 6 kg abc as per boq specification , supplying and fixing 63 mm dia 15 m long rrl hose pipe with stainless steel grade 304 as per boq specification , supplyingand fixing 63 mm dia gun metal short branch pipe with 20 mm nominal stainless steel grade 304 as per boq specification , supply installation hanging with suitable size ss chain and fixing arrangment singe sided as per boq specification , supply installation hanging with suitable size ss chain and fixing arrangment double sided as per boq specification , supplying installation testing and commissioning of smoke detector as per boq specification , supplying installation testing and commissioning of manual call box of abs type as per boq specification , supplying and laying of 2x1.5 sqmm fire alarm armoured cable as per boq specification , supplying installation testing and commissioning sector panel4 zone as per boq specification , supplying installation testing and commissioning response indicator on surface as per boq specification , supplying installation testing and commissioning fire alarm as per boq specification , supplying installation testing and commissioning of main control and indicating panel as per boq specification total quantity : 2844...

Due Date : August 01, 2023

Tender Value : ₹ Ref. Documents

View Tender
21
Department Of Training And Technical Education - Delhi

38194162 bids are invited for raw material ( q3 ) 1 cotton waste without oil ( teasewali ) tool & die & fitter 500 kg 2 2 duster cloth white 24” x 24” various trades 200 nos. 3 3 m.s. flat & square flat: 100x12mm, 100x10mm, 100x15mm, 100 x 20 mm, 100 x 25 mm, 75x12mm, 75x10mm, 50x10mm, 50xmm & 50x6mm square: 50mm and other assorted sizes & shapes, as per requirement tool & die, welder, fitter, abr 1, 500 kg 4 4 old dhoti 4mtr. length ( white colour ) pure cotton various trades 500 nos. 5 5 emery cloth / paper ( medium & fine ) ( assorted ) various trades 100 nos. 6 7 grinding wheel cgc60 k5 ug ø250 x 25 x 31.75mm tool & die 3 nos 7 9 cnc axis drive battery for vmc tool & die 1 nos 8 12 multipurpose grease, make: castrol / servo ( in one kg pack ) fitter, welder, mmv, maee, rac 12 kg 9 14 file card fitter 24 nos. 10 18 rivet ( aluminum ) dia 6mm, snap head fitter 4 pkts. 11 20 ag 4 grinding wheels, make: dura cut / bosch welder, abr 50 nos. 12 22 aluminum strip 50x3mm welder, abr 8 kg. 13 23 arc welding plain glass 108 mm x 82 mm x 3 mm. welder, abr 20 nos. 14 24 arc welding single coloured glass 108 mm x 82 mm x 3 mm. din 11 a & 12 a ( germany ) welder, abr 20 nos. 15 25 cutting blade dia 14round, dura cut / bosch welder, abr 10 nos. 16 26 cutting blade dia 4 round dura cut / bosch welder 25 nos. 17 27 earth clamp 600 a 9 gs esab / adore welder, abr 10 nos. 18 28 electrode holder 600 amps fully insulated ( esab ) welder, abr 10 nos. 19 29 gas mask ( welding ) welder, abr 20 nos 20 30 gas welding goggles with colour glass 3 or 4a din welder, abr 20 nos. 21 31 hss cutter 4 ( dura cut / bosch ) for stainless steel cutting welder 50 nos. 22 34 m.s pipe dia 50mmx3mm thick welder, abr 100 kgs. 23 36 s.s. strip 50 x 3 mm ( 304 no. ) , jindal welder, abr 25 kg. 24 37 tip cleaner welder, abr 7 nos. 25 38 m.s. electrode dia 3.15mm esab make welder, abr 2, 000 nos. 26 39 belt type emery paper 4 x 80no grit, make: zircon welder 1 roll ( roll of 50mtr ) 27 43 industrial top & socket 32amp ( three phase ) welder 2 sets 28 44 industrial top & socket 32amp ( single phase ) welder 2 sets 29 45 mig wire roll 1.0mm welder 1 roll 30 46 aluminum filler rod dia 3mm abr 3 kg. 31 51 ccms rod dia 3mm abr 3 kg. 32 52 ccms rod dia 1.6mm abr 3 kg. 33 53 emery roll 80 nox150mm width abr 1 roll 34 54 flash back arrester ( cylinder mounted ) ( esab / boc ) ( da+o2 ) abr 1 pairs 35 55 flash back arrester ( torch mounted ) ( esab / boc ) ( da+o2 ) abr 2 pairs 36 57 rubber hose clips 1 / 2 abr 20 nos. 37 58 rubber hose oxygen 8 mm dia as per bis ( esab ) abr 5 mtrs. 38 59 rubber hose acetylene 8 mm dia as per bis ( esab ) abr 5 mtrs. 39 61 spark lighter abr 10 nos. 40 62 s.s. electrode dia 2.5 mm abr 120 nos. 41 63 s.s. electrode dia 3.15 mm abr 120 nos. 42 64 s.s. filler rod 2 mm dia abr 2 kg. 43 70 dust mask, make: 3m abr, abp 125 nos 44 71 aluminum electrode 3.15mm lt make abr 3 kg 45 72 black welding glass 4.25x 3.25 ( germany ) ( 13d ) abr 10 nos 46 73 welding cable thimble 600 amp copper abr 5 nos 47 74 white welding glass 4.25x 3.25 abr 20 nos 48 75 contact tip for mig welding 0.8mm abr 50 nos 49 76 welding cable 400 amp abr 10 mtrs. 50 78 drawing rubber ( big, non dust ) make: doms / camel / r natraj abp 500 nos. 51 79 fevicol tube 100 ml various trades 200 nos. 52 83 cotton gloves abp 200 nos. 53 98 turpentine oil abp 30 ltrs 54 100 synthetic enamel paint ( different colours ) abp 20 ltrs 55 116 anabond mmv 2 tubes 56 117 car polish ( liquid ) , make: waxpol mmv 5 bottles 57 118 car rubbing polish mmv 5 nos. 58 119 car washing soap, make: waxpol mmv 2 bottles 59 120 dash board polish ( waxpol ) mmv 2 bottles 60 124 engine oil 5w40 ( diesel engine ) , make: castrol ( 4ltr pack ) mmv 2 packs ( pack of 4ltr ) 61 128 air filter maruti 800 mmv 4 nos. 62 129 brake oil, make: castrol ( dot 3 ) ( 1 ltrs. pack ) mmv 10 ltrs. 63 130 fuel filler maruti 800 mmv 4 nos. 64 131 hose pipe set with clamp ( maruti 800 ) mmv 10 sets 65 132 self starter carbon bush set for maruti 800 mmv 10 nos. 66 133 timing packing kit maruti omni mmv 4 nos. 67 134 valve lapping paste mmv 4 tins 68 135 wheel cylinder maruti 800 mmv 8 set 69 136 wiper blades set maruti 800 mmv 4 sets 70 138 blade type fuse ( 5, 10, 15, 20 & 252amp. ) mmv 50 nos. ( 10 nos. each ) 71 139 mobil oil 50w40 ( in 5ltr pack ) maee 5 ltrs. 72 140 mobil oil 4t 20w40 synthetic ( in 5ltr pack ) maee 5 ltrs. 73 142 pencil cell ( aa ) , make: eveready / duracell various trades 100 nos. 74 143 cmos battery maee, chnm 50 nos. 75 144 cell 1.5v maee 10 nos. 76 145 cell 3v maee 10 nos. 77 146 solder wire 60: 40, make: bharti ( 200gm pack ) various trades 70 packs 78 147 soldering paste / flux ( 15gm pack ) various trades 30 dibbies 79 148 thermistor 10kohm maee, inst. / mech, tpes, mcea, iot ( shc ) 500 nos. 80 149 resistor ( 1ω, 10ω, 20ω, 5w, assorted value ) various trades 2, 000 nos. 81 150 photo diode maee, tpes, m cea, electronic s, iot ( shc ) 100 nos 82 155 lose fuse holder maee 20 nos 83 165 battery cleaner spray maee 4 bottles 84 168 chemical compound for fasteners maee 1 bottles 85 169 crocodile clip for heavy duty battery charging clips ( ve+ & ve ) maee 10 pairs 86 170 fog lamp assembly ( lumax ) for maruti 800 ( coloured led type ) maee 2 nos 87 172 horn pin with insulated cover maee 50 nos 88 174 lose thimble male & female maee 50 sets 89 175 radiator coolants maee 4 liter 90 188 ujt maee 50 nos. 91 190 plain washer 8mm, 10mm, 12mm, 14mm ( pkt of 100pcs ) maee 4 pkts. 92 191 fues 5 amp, 10 amp, 15 amp, 20 amp, 30amp ( micro blade type ) maee 10 pkts. 93 192 anti rust spray ( 500ml bottle ) maee 2 bottles 94 194 multimeter lead for digital multimeter ( model: htc instrument 830 l ) maee 4 pair 95 195 circle cable clip ( 5mm &10mm ) maee 2 pkts ( 1each ) 96 196 cable tie ( self locking nylon ) 10cm, 15cm, 20cm ( pkt of 20pcs ) maee 6 pkts ( 2each ) 97 198 button cell ( aaa ) ( lr 44 ) for temp. meter maee 2 nos. 98 200 ardrino uno maee 4 nos 99 202 aa / aaa battery holder maee, dp, chnm 10 nos 100 203 ultrasonic sensor maee 4 nos 101 204 servo motor 1500 rpm maee 4 nos 102 205 cotton safety gloves { washable } maee 42 pairs 103 206 hydrometes ( mega battery ) maee 4 nos 104 215 led 4mm, 5mm ( red, green, white, yellow , blue ) ( bright ) various trades 1, 000 nos 105 216 capacitor ( assorted ) 100mf maee 100 nos 106 217 ic 74xx, 78xx, 79xx series various trades 1, 000 nos 107 218 ic lm 317 series maee, mcea 200 nos 108 219 ir proximititiy sensor maee 50 nos 109 220 photo electric sensor maee 25 nos 110 225 roof light / cabin light maee 4 nos 111 229 diode in 4007 various trades 2, 000 nos. 112 230 pencil cell ( aaa ) , make: eveready / duracell various trades 100 nos. 113 291 led bulb 15w, make: philips rac 20 nos. 114 292 a.c. servicing brush 18 rac 40 nos. 115 293 charging line 1 / 4x1 / 4, make: asian rac 40 nos. 116 294 cylinder service valve 1 / 4 x 3 / 8 ( m.f.t. ) with knob / lever rac 20 nos. 117 295 hand shut off valve with gauge 0 500psi rac 40 nos. 118 296 nylon tie belt 12 ( 100pcs pkt ) rac 8 pkts. 119 297 pencil type filter cum drier, make: whirlpool rac 48 nos. 120 298 pin type charging valve 1 / 4 rac 50 nos. 121 299 plastic gitti 6mmx38mm rac 20 pkts. 122 300 plastic spray gun for a.c. servicing rac 24 nos. 123 301 flexkwik ( 30ml ) , make: pidilite rac 20 nos. 124 302 packing tape ( black ) 2 rac 48 nos. 125 303 teflon tape, make: m seal rac, inst. / mech 58 nos. 126 304 primer red oxide ( 1 ltr pack ) , make: asian / berger rac 4 pack 127 305 black paint ( 1 ltr pack ) , make: asian / berger rac 8 pack 128 306 timer for frost free refrigrator ( godrej, lg , samsung, whirlpool ) rac 40 nos. ( 10 each ) 129 307 bimetal thermastat for frostfree refrigerator ( godrej, lg, samsung, wherlpool ) rac 40 nos. ( 10 each ) 130 308 thermostat for frostfree refrigrator ( electrical ) rac 40 nos. 131 309 air control thermostat for frostfree refrigrator ( samsung ) rac 12 nos. 132 310 thermostat for direct cool refrigrator rac 48 nos. 133 311 thrmostat for water cooler rac 12 nos. 134 312 fins comb ( 18 fins / inch ) multi size rac 20 nos. 135 313 flux for brazing ( silmux t ) ( 500gm pack ) , make: mathure flux rac 4 nos. 136 317 coil saver 400ml ( krish make ) rac 48 canes 137 318 charging line 5 / 16x1 / 4 for 410a refrigerant ( asian / value make ) rac 20 nos. 138 320 fastner 6mm, 8mm & 10mm rac 120 nos. ( 40 each ) 139 321 sio coating for coil rac 20 nos. 140 322 wd 40 , 1235 rust removal aerosal spray rac 20 nos. 141 323 voltage type relay for a.c rac 20 nos. 142 324 float ball assembly for water cooler ( 15mm ) rac 20 nos. 143 325 m seal ( phatphat ) 50gm pack rac 20 nos. 144 326 flash arrestor with fitting ( n r v ) for o2 & c2h2 ( acetylene ) rac 4 nos 145 327 sight glass 1 / 4 rac 8 nos. 146 328 straight thimble ( heavy duty ) rac 12 pkts. ( pkt of 100pcs ) 147 329 side thimble ( heavy duty ) rac 12 pkts. ( pkt of 100pcs ) 148 330 ball value 1 / 4x1 / 4 rac 8 nos. 149 331 ball value 1 / 4x5 / 16 rac 8 nos. 150 332 cd ( r ) , make: moser bare / sony dp, copa 100 nos. 151 335 mouse ( usb ) , make: logitech / compaq dp, chnm, idd, copa, ssp 104 nos. 152 336 aaa cell rechargeable for radio trigger dp 2 nos 153 339 c.f. card 32gb ( maximum high speed sandisk ) dp 10 nos. 154 340 card reader for c.f card and s.d. card high speed dp 10 nos. 155 343 leather lens cleaner ( chumish leather use for camera lens cleaning ) dp 10 nos. 156 344 pen drive 32gb ( high speed ) , make: kingston / transcend dp, copa 24 nos. 157 345 power cable 10 mtr. with power plug on one side dp 10 nos. 158 347 sdhc memory card 32gb ( extreme pro 90mb 10 no ) dp 10 nos. 159 348 threaded studio light bulb 100w dp 10 nos. 160 349 cd marker ( black ) , make: kores / camlin dp 20 nos. 161 351 pencil ‘h & hb’ make: camlin / natraj / apsara various trades 2, 000 nos. 162 354 hdmi to hdmi data cable dp 8 nos. 163 355 micro sd card 32gb dp 8 nos. 164 356 background ( 3green 2 white ) dp 7 nos. 165 357 extension board ( power 4 switch 20 mtr cable ) dp, chnm, cosmetology 18 nos. 166 372 cleaning brush chnm 10 nos 167 373 io box chnm 50 nos 168 374 bread board chnm, electronics, iot ( shc ) 110 nos 169 375 cat 6 cable ( roll of 305mtrs. ) chnm, tpes, mcea 7 rolls 170 376 rj 45 jacks chnm 2 pkts ( pkt of 2000pcs 171 377 rj 11 connector chnm, tpes, mcea 300 nos 172 378 telephone wire chnm 100 mtrs 173 379 internal hard disk ( 1tb ) ( seagate ) chnm, copa 20 nos 174 380 brown tape 2 chnm, copa 10 nos 175 381 duster cloth yellow 24x24 various trades 200 nos 176 383 ram ddr2 2gb ( simtronics / transcend ) chnm 10 nos 177 384 hook up wire ( cu ) 0.5mm chnm 4 rolls 178 385 sata cable chnm 30 nos 179 386 battery cell ( aa ) chnm 40 nos 180 387 cd marker pen chnm 10 nos. 181 388 mouse pad chnm 10 nos 182 389 8 port hub chnm 6 nos 183 390 rj 45 cable extender chnm 10 nos 184 391 capictor ( 220mfd + assorted value ) chnm 500 nos 185 392 inductor ( 0.5h, 1h ) chnm 50 nos ( 25 each ) 186 393 card reader chnm 5 nos 187 394 iso proply oil chnm 5 ltr 188 395 transistor ( bc 547, bc 548, 2907, 244n548, 148, sl100, 188, 187, 558, 547, 2907, 2n222, 188, 187, 147, 548, 148 and other assorted values ) various trades 2, 000 nos 189 396 thyristor ( 50 v ) chnm 50 nos 190 397 ultra dual usb & otg pen drive ( 64gb ) chnm 10 nos 191 398 usb to sata hard drive adapter chnm 4 nos 192 399 netgear wifi range extender chnm 6 nos 193 400 transformer 6 0 6, 500 ma chnm, electronics 20 nos 194 401 vga cable 5 mtr chnm 8 nos 195 402 vga splitter chnm 4 no 196 403 transformer 6 0 12volt chnm 10 nos 197 404 memory card ( sd ) 2gb chnm 4 nos 198 405 memory card ( multimedia ) 16gb chnm 4 nos 199 406 bluetooth chnm 6 nos 200 407 antistatic wrist wrap chnm 8 nos 201 408 antistatic pad chnm 4 nos 202 409 plug 6a chnm 5 nos 203 410 socket 6a chnm 5 nos 204 411 otg cable chnm 10 nos 205 412 external hard disk 1tb chnm, copa 10 no 206 414 optical drive for laptop chnm 6 nos 207 415 smps for lenovo m series pc chnm 8 nos 208 416 ddr 3 ram 4gb chnm 10 nos 209 417 hdmi extender chnm 8 nos 210 418 hdmi cable 5 mtr chnm 4 nos 211 419 hdmi cable 15 mtr chnm 4 nos 212 420 ssd hard disk 256 gb chnm 8 nos 213 421 power cord for cpu / monitor chnm, copa 40 nos 214 422 usb printer cable ( d type ) chnm 10 nos 215 423 ram ddr3 2gb ( simtronics / transcend ) chnm, copa 24 nos 216 424 ram ddr4 4gb ( simtronics / transcend ) chnm 16 nos 217 425 co axial cable chnm 100 mtrs 218 426 wireless adapter chnm 12 nos 219 427 cello type 1 ( big roll ) chnm, ft 20 rolls 220 429 optical fibre cable chnm 20 mtrs 221 430 optical fibre connector chnm 40 nos 222 431 giga byte motherboard i5 chnm 4 nos 223 432 smps 450 w chnm, tpes, mcea 11 nos 224 433 computer case / cabinet chnm 4 nos 225 434 optical drive chnm 8 nos 226 436 capacitor 220 mf, 10v inst. mech., mcea, iot ( shc ) 100 nos. 227 437 ceramic capacitor ( 0.01uf, 0.001uf, 01uf & 10pf / 50v ) inst. mech., mcea, tpes, iot ( shc ) 800 nos ( 200 each ) 228 438 glass fuse 2a, 5a & 10a, 500v ( 100 each ) inst. mech., tpes, mcea, iot ( shc ) 200 nos. 229 439 ic lm 555 timer inst. mech., tpes, mcea, electronics, iot ( shc ) 100 nos. 230 440 relay 24w inst. mech., mcea, iot ( shc ) 30 nos. 231 441 zener diode 3.3v 250mw, 3.3v 500mw, 4.7v 500mw, 3v, 6v, 9v, 12v, 33v, 4.7v, in41418 and other assorted value various trades 500 nos 232 442 pvc insulated hook up wire inst. mech., tpes, mcea, iot ( sh c ) 5 rolls 233 443 ldr sensor 5mm inst. mech., tpes, mcea, iot ( shc ) , electronics 100 nos. 234 444 switches on / off 5a inst. mech., tpes, mcea, electronics, iot ( shc ) 100 nos. 235 445 push button switch inst. mech., tpes, mcea, electronics 100 nos. 236 446 dc motor 3v, 9v, 12v tpes, electronics, iot ( shc ) 45 nos. ( 15 each ) 237 447 ceramic capacitor 103, 104, 203 ( 25v ) & assorted values tpes 500 nos. 238 448 proximity sensor tpes 5 nos. 239 449 toggle switch tpes 20 nos 240 450 capacitor 10 micro freed / 25v tpes, mcea, electronics, iot ( shc ) 100 nos 241 451 capacitor 1000 micro freed / 25v tpes, mcea, electronics, iot ( shc ) 100 nos 242 452 potentiometer 50k, 10k, 100k & 1kω tpes, inst. mech., mcea, iot ( shc ) 100 nos. 243 453 photo transistor tpes, mcea, el ectronics 100 nos 244 454 relay 6v inst. mech., mcea, iot ( shc ) 245 455 relay 9v inst. mech., mcea, iot ( shc ) 30 nos 246 456 ic uln2003 tpes 10 nos 247 457 polyester capacitor ( 6.8μf / 1000v, 1μf / 100v, 12μf / 100v & 5.6μf / 1000v ) tpes, mcea, iot ( shc ) 300 nos. 248 458 adjustable inductor ( 0.10uh to 1uh ) tpes, mcea 50 nos. 249 459 bar magnets tpes, mcea & electronics 15 nos. 250 460 battery snap connector tpes, mcea, electronics, iot ( shc ) 100 nos. 251 461 motion sensor tpes 10 nos 252 462 transformer ( 6 0 6v, 9 0 9v, 12 0 12v, 15 0 15v ) 1.5a tpes, mcea 50 nos 253 463 irf 840 tpes 10 nos. 254 464 inductor 133uh chck, 1mh, 470uh, 47uh, 1uh tpes 50 nos 255 465 ir sensor ( transmitter & receiver ) 3mm tpes 10 nos. 256 466 jumper wire ( male to male ) & ( female to male ) tpes, mcea 30 nos. 257 467 variable capacitor ( 5.2 to 30pf / 100v, 30pf ) tpes, mcea 40 nos. 258 468 bnc to bnc connector tpes 3 nos. 259 470 op amp ic 741 tpes, electronics 50 nos 260 471 ic regulator lm 317 tpes 20 nos 261 472 triac bt 136 tpes 10 nos 262 473 diac tpes 10 nos 263 474 solar pannel 6v, 100e tpes, electroni cs, iot ( shc ) 20 nos 264 475 ic lm 324 ( quad op amp ) tpes 10 nos 265 476 ujt 2ừ 2646 tpes 10 nos 266 477 mosfet 3n187, 1rf 9540n, 1rf 540n, 1rfz44m, 75n tpes, iot ( shc ) , mcea 100 nos 267 478 scr 2p4m, bt169, 50v tpes 100 nos. 268 479 ic base ( 8, 14 & 16 pins ) tpes 60 nos 269 480 seven segment display ( common anode & common cathode ) tpes, mcea 100 nos 270 481 buzzer 5v tpes 10 nos 271 483 smd pcb tpes 100 nos 272 484 smoke detector mcea 10 nos. 273 485 sound ic 2080, 2050, 4440, tda2030 mcea 80 nos 274 486 bnc to crocodile connector mcea 20 nos 275 487 multimeter lead mcea, iot ( shc ) 20 nos 276 488 soldering iron bit 10w, 25w mcea, iot ( sh c ) 50 nos 277 489 f.e.t bfw 10 / 11 mcea 20 nos 278 490 power diode mcea 20 nos 279 491 l.d.r mcea, iot ( shc ) 100 nos 280 492 loudspeaker 3, 8ω mcea 10 nos 281 493 potentiometer with on / of, 100kohm mcea 20 nos...

Due Date : July 07, 2023

Tender Value : ₹ Ref. Documents

View Tender
22
Military Engineer Services - Delhi

38077255 addn/altn/improvement to classroom and provn of smoke detector at dit at subroto park under ge (af) subroto park, delhi cantt 10...

Due Date : July 21, 2023

Tender Value : ₹ 1.03 Crore

View Tender
23
Northern Railway - Delhi

37871465 supply of smoke detector unit and fire alarm system complete with all accessories conforming to rcf specification no. edts 087 rev.b 1 suitable for lhb power cars. [ warranty period: 30 months after the date of delivery ] sr. section engineer / pc / stb / new delhi 35.00 set...

Due Date : June 01, 2023

Tender Value : ₹ Ref. Documents

View Tender
25
Ministry Of Defence - Delhi

37838839 bids are invited for customized amc / cmc for pre owned products 05 fire alarm control panesl 114 smoke detectors 13 manual call points 13 hooters and accessories cables conduits and batteries and box as per existing system configuration; agni; comprehensive maintenance...

Due Date : June 05, 2023

Tender Value : ₹ 2.25 Lakhs

View Tender
26
Ministry Of Home Affairs - Delhi

37798639 bids are invited for fire appliances title1 , supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600 / 1000v rated with annealed copper conductor having xlpe insulation, steel wire armouring & frls outer sheath complete as required. supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. supplying, installation, testing & commissioning of smoke detector with builtin led and mounting base complete with all connections etc. as required supplying, installation, testing & commissioning of manual call boxes of ms construction in surface / recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in m.s. box ( 16 swg ) with hinged cover plate & suitable for operation with amplifier i / c line matching transformer etc. complete as required. supplying, installation, testing & commissioning of repeater panel with 320 character / touch screen lcd display with inbuilt reset, knowledge and silence switches complete as required. supplying, installation, testing & commissioning of addressable strobe complete as required. supplying, installation, testing & commissioning of 15 / 3 / 6w ceiling speaker complete as required. total quantity : 1...

Due Date : June 05, 2023

Tender Value : ₹ 5.51 Lakhs

View Tender
27
Container Corporation Of India Limited - Delhi

37728155 enquiry for annual maintenance contract for intelligent fire alarm system, high sensitivity smoke detector & intelligent fire suppression ( flooding ) system fm 200 ( hfc 227ea ) of server room no 110, administrative building at icd / tkd for 02 year. => limited...

Due Date : June 02, 2023

Tender Value : ₹ 4.94 Lakhs

View Tender
28
Military Engineer Services - Delhi

37721078 repair / maint of fire equipment, fire alarm, fire panel, smoke detector, fire hydrant and fire pipelines at tech area and repair / maint of oh tank, ug sumps, hdpe tank, swt and other connected works at vsb, vsv, mes colony, tech area at tughlakabad...

Due Date : June 07, 2023

Tender Value : ₹ 45 Lakhs

View Tender
29
Indian Army - Delhi

37699723 bids are invited for starting relay , oil filter , clutch plate , pressure plate , fuel flexible pipes for feed pump to fipand to filter , fuel pipe , air filter , lubricant pipe , gasket for cyl head , air cleaner filter 82.5kva , temperature sensor 82.5 kva , rocker lubricant pipe , air filter primary , air filter safety , tube light led , led bulb 9w , led bulb 18w , led bulb 3w , led bulb 5w , led bulb 23w , led bulb 9w thread type , pencil cell aa , pencil celll aaa , 9v bty for smoke detector , amp meter , bib cock brass , bib cock steel , bib cock plastic , self screw , nail , pvc solvent , insulation tape , emeri paper , m seal , self screw bit set no 6 to 15 , thread tape , fevi kwik bond bottle , iron patti 4mm , frp sheet , sunmica board for electrical board , hacksaw blade , isopropyl alcohol , feviquick adhensive glue , angle iron box type 4mm , angle iron box type 6mm total quantity : 950...

Due Date : June 05, 2023

Tender Value : ₹ 5 Lakhs

View Tender
30
Indian Institute Of Technology - Delhi

37514189 tender for minor civil maintenance works at various laboratories and faculty rooms in academic area at iit delhi 1 by mechanical transport including loading, unloading and stacking 1.1 disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer in charge. 2 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level : 2.1 1:2:4 (1 cement : 2 coarse sand (zone iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 2.2 1:3:6 (1 cement : 3 coarse sand (zone iii) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) 3 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : 3.1 cement mortar 1:4 (1 cement : 4 coarse sand) 4 half brick masonry with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level. 4.1 cement mortar 1:4 (1 cement :4 coarse sand) 5 providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. 5.1 granite stone slab of colour black, cherry/ruby red 5.1.1 area of slab upto 0.50 sqm 5.1.2 area of slab over 0.50 sqm 6 providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge. 6.1 granite work 7 extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. 8 extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 9 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 10 providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. 11 providing and fixing chromium plated brass handles with necessary screws etc. complete: 11.1 100 mm 12 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :12.1 250x10 mm 12.2 150x10 mm 13 providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 13.1 125 mm 13.2 100 mm 14 providing and fixing aluminium hanging floor door stopper, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 14.1 twin rubber stopper 15 providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. 15.1 double strip (horizontal type) 16 providing and fixing bright /matt finished stainless steel handles of approved quality & make with necessary screws etc all complete. 16.1 providing wood work in frames of cupboard shutter and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) using klin seasoned first class marandi wood. 17 providing and fixing 18mm thick both side laminated (clor to be approved by engineer in charge) hdhmr (high density high moisture resistance) board of make (action tesa / greenply / centuryply) in cup board shutters, inside shelves, sides, back portion or in drawer units etc. as per architectural drawings and site requirement and complete as per direction of engineer in charge. 18 providing and fixing 2mm thick 16 19 mm wide pvc edge banding tape of approved quality for cupboard / wardrobe shutters including neccesary hot glue by edge banding machine etc complete as per direction of engineer in charge. 19 providing and fixing auto closing spring loaded hinges (hydraulic type) of make hettich/hafele to cupboard shutters with full theaded steel screws including making necessary recess in board and finished etc. complete as per direction of engineer in charge. 20 structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 21 steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 21.1 hot finished welded type tubes 22 providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per is : 4457, complete as per the direction of engineer in charge. 22.1 in flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) 22.1.1 acid and alkali resistant tile 22.2 in dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) 22.2.1 acid and alkali resistant tile 23 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 23.1 size of tile 600x600 mm 24 deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm. 25 fixing glazed/ ceramic/ vitrified floor tiles with cement based high polymer modified quick set tile adhesive (water based) conforming to is: 15477, in average 3mm thickness. 26 providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. 26.1 size of tile 600x600 mm 27 providing and fixing pvc flooring/vinyl flooring in roll form of thickness 2mm fixing with proper adhesive and hard rolled to ensure perfect bonding and avoid air gaps, colour and shade as per directions of engineer in charge. 28 providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer in charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineer in charge. the sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 29 providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main t runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross t of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main t at 600 mm center to center to form a grid of 1200x600 mm and secondary cross t of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. main t runners to be suspended from ceiling using gi slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm gi adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main t, bottom exposed width of 24 mm of all t sections shall be pre painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by engineer in charge. 29.1 gi metal ceiling lay in perforated tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of gi sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having nrc (noise reduction coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black glass fiber acoustical fleece. 30 wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : 30.1 two or more coats on new work 31 painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 31.1 two or more coats on new work 32 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 33 removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 34 hacking of cc flooring including cleaning for surface etc. complete as per direction of the engineer in charge. 35 dismantling 15 to 40 mm dia g.i. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of engineer in charge.(a) internal work exposed on wall 36 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer in charge. 36.1 nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 37 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge. 37.1 in cement mortar 38 dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 38.1 of area 3 sq. metres and below 38.2 of area beyond 3 sq. metres 39 dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 39.1 for thickness of tiles 10 mm to 25 mm 40 dismantling of flushing cistern of all types (c.i./pvc/vitrious china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 41 dismantling tile work in walls laid in cement mortar including stacking material within 50 metres lead. 41.1 for thickness of tiles 10 mm to 25 mm 42 excavating holes upto 0.10 cum, including getting out the excavatedsoil, then returning the soil as deported in layers not exceeding 20cm in depth, including consolidating and deposited layer by ramming watering etc., disposing of surplus excavated soil as directed with ina lead of 50 mm and lift upto 1.5 m. 42.1 all kind of soil 43 providing and laying factory made chamfered edge cement concretepaver blocks in footpath, parks, lawns, drive ways or light trafficparking etc, of required strength, thickness & size/ shape, made bytable vibratory method using pu mould, laid in required colour &pattern over 50mm thick compacted bed of sand, compacting andproper embedding/laying of inter locking paver blocks into the sandbedding layer through vibratory compaction by using plate vibrator,filling the joints with sand and cutting of paver blocks as per requiredsize and pattern, finishing and sweeping extra sand. complete all asper direction of engineer in charge. 43.1 80 mm thick c.c. paver block of m 30 grade with approvedcolor design and pattern. 44 providing and fixing white vitreous china laboratory sink with c.i.brackets, c.p. brass chain with rubber plug, 40 mm c.p brass wasteand 40mm c.p. brass trap with necessary c.p. brass unions complete,including painting of fittings and brackets, cutting and making goodthe wall wherever required :44.1 size 600x450x200 mm 45 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. (glazing, paneling and dash fasteners to be paid for separately) : 45.1 for fixed portion 45.1.1 powder coated aluminium (minimum thickness of powder coating 50 micron) 45.2 for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required (fittings shall be paid for separately) 45.2.1 powder coated aluminium (minimum thickness of powder coating 50 micron) 46 providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to is: 12823 grade l type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in charge. 46.1 pre laminated particle board with decorative lamination on both sides 47 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . (cost of aluminium snap beading shall be paid in basic item): 47.1 with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 48 providing and fixing brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 49 providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to is: 1868 with minimum anodic coating of grade ac 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with c.p. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of engineer in charge. (only weight of grill to be measured for payment). 50 providing and fixing sliding roller wheel suitable for aluminium sliding door with guide and necessary accessories and screw etc., complete. work shall be executed as per directions of engineer in charge. 51 providing and fixing sun control film/frosted glass film of approved quality, shade and colour as approved by engineer in charge. work shall be executed as per directions of engineer in charge. 52 providing and fixing roller blinds,manually operated with headrail aluminium powder coated, the fabric should be screen openness of 5% and composition of 75% pvc, 25% polyester with fabric weight of 465 gsm (tolerance± 5%), control unit set, plastic chain, complete with all required accessories etc., colour and shade as per sample approved by engineer in charge. make: vista/ mac/ marvel...

Due Date : May 10, 2023

Tender Value : ₹ 27.48 Lakhs

View Tender
31
Delhi Metro Rail Corporation Limited - Delhi

37445354 procurement of conventional photoelectric smoke detector., conventional photoelectric smoke detector, conventional photoelectric smoke detector with base model no 2351 e / 2351 ec make: system sensor => limited...

Due Date : May 12, 2023

Tender Value : ₹ Ref. Documents

View Tender
32
Urban Development Department - Delhi

37348046 bids are invited for smoke detector for escalator system. ( q3 ) , step roller for escalator ( q3 ) , chain roller for escalator ( q3 ) total quantity : 2191...

Due Date : May 12, 2023

Tender Value : ₹ 56.50 Lakhs

View Tender
33
Delhi Metro Rail Corporation Limited - Delhi

36631983 auction sale of misc. e waste scrap consisting of: monitor, cpu, printer / scanner, ups, server, laptop, television, mouse, keyboard, hdd / dvd ritter, capacitor, projector, defective parts of mic and loud hailer, breath analyzer machine, la base, tmu, voltmeter, push button switch, paper shredder machine, plotter, digital multimeter, 2*20 kva hitachi hi rel make ups, amplifier slice, gate keypad, fixed camera, tom pid, kvm, pids / pas server, microphone, tcs siemens, u / v realy minilec, megger, battery charger card, limit switch isolator, la counter, gps digital clock, analog energy meter, prv, rtu rack, convertor, secure meter, tmu, isolator, electronic ballast / chowk, fire alarm, wms control indication panel, ups fan, pressure meter, digital meter, smoke detector, mccb, compressure, faulty voltmeter, miniprof wheel system, led / rechargeable / headmount torch, electric kettle, pendrive, power adapter, speaker, tic, mib, sdcc, vmr realy, bpa card, led block, emc filter, iota tdm card, control module, fault isolater, bms, mcb, digital timer, clamp meter, on delay timer, electrical meter, ampere meter, dc dc power supply 110v, 35a smps bassed sm4000 series make aplab, multimeter, etc....

Due Date : March 13, 2023

Tender Value : ₹ Ref. Documents

View Tender
34
Delhi Metro Rail Corporation Limited - Delhi

36631935 auction sale of misc e waste consisting of: re 300 relay, ammeter, voltmeter.contactor, fuse, capacitor , cubical fan, igbt, tri colour torch, split ac outer and inner unit, extension board, torch, ups 42 ah 1kva, bollard light, g 02 card, smoke detector, limit switch, step gap light, rms cable 3 core, surge protection, ior card, internal ups 1 kva, ballast 2*36 watt, acb spring charging mechanism, energy meter, mccb 630 amp, ups fans, bms server with monitor, dot matrix printer, colour printer, keyboard, mouse, actuator of mfd, mcb 04 pole, hcac compressor, electronic ballast ( inverter230ac / 110dc, electronic ballast, fan sensor, mcb assembly, indication lamp, power connector, charging motor, radio network, sattelite, server, rcw server, sdh nms server , lif capacitor, rechargeble torch, led 32 inch, 46 inch, keyboard, mouse, fan rack, kvm, dsm reader, dom, adopter, surge protection, fan unit, analog cock movement, misc cable, counter, tmu, amp meter and contactor, remote, r 300 relay, cell tester, under voltage relay, aux contactor, wms alarm unt, control unit, magger, avr, afm power card, ag crw, vga, sdcc, crt monitor, frequency vibrator, bna parts, gcu, ffc tvm pid, interface board, interlink board, plc, pcm, sma antenna, tom hopper, tom cpu, printer, ram, hdd, tvm, pid, mdd card, monitor, samsung psu, smps, 3so2, sma display cable, tcu sensor, w32 & 33 cable, thalas ged led, vlri card, tvm mtp display, capacitor 1000, 100, 10mf, rsm cpu, monitor, timer, fdcu, current, ups capacitor 1 mf, vmr, 2k2 resistor, multimeter probe, ac remote etc. ...

Due Date : March 13, 2023

Tender Value : ₹ Ref. Documents

View Tender
35
Indian Army - Delhi

36494432 bids are invited for smoke detectors , hooters , mcp , wire , control panel , rack wall mounted 12u , rack wall mounted 4u , switch unmanaged , switch managed mse total quantity : 225...

Due Date : March 09, 2023

Tender Value : ₹ Ref. Documents

View Tender
36
Indian Army - Delhi

36307535 bids are invited for smoke detectors , hooters , mcp , wire , control panel mse total quantity : 221...

Due Date : February 27, 2023

Tender Value : ₹ Ref. Documents

View Tender
38
Delhi Metro Rail Corporation Limited - Delhi

36006759 procurement of conventional photoelectric smoke detector, conventional photoelectric smoke detector with base, model no 2351 e / 2351 ec, make: system sensor [ warranty period: 12 months after the date of delivery ] => limited...

Due Date : February 14, 2023

Tender Value : ₹ Ref. Documents

View Tender
40
Public Works Department - Delhi

35666056 annual repair maintenance of various electrical and mechanical services at district court, rohini, delhi. , ceiling fan15 nos. 2.5 mfd capacitor200 nos. smoke detector 430 nos. heat detector 15 nos. 63 amp tp mcb16 nos. voltmeter 2 nos. ammeter 2 nos. 10 hp monoblock pump 2 nos.. 2 hp dewatering pump 3 nos. 7.5 hp dewatering pump 1 no. dp mcb enclosure 25 nos. dol starter 3 nos. butterfly valve 100mm 3 nos. nrv 100mm 3 nos. 3 hp high pump 1 no. 16 amp switch 10 nos. 16 amp socket 10 nos. 16 amp top 5 nos. 6 amp switch 30 nos. cordless bell 1 nos. invertor ac pcb 11 nos. desert cooler 10 nos. cordless bell 3 nos. 6 amp plug top 10 nos. ding dong bell 1 nos. top 16 amp 2 nos. 16 amp socket 13 nos. 225 / 250 fresh air fan 5 nos. 2 x 2 led fitting 4 nos. 36 / 40 w ballast 4 nos. 36 w tube 13 nos. 36 / 40 w led fitting 1 nos. 16 amp switch 4 nos. 2 kw heat convector 2 nos. heat element 2 kw 3 nos. dc invertor rotary compressor 2 tr 9 nos. reciprocating compressor 2 tr 13 nos. reciprocating compressor 2 tr 14 nos. outdoor motor 2 tr 35 nos. indoor motor 2 tr 35 nos. invertor ac pcb set indoor & outdoor 18 nos. remote kit pcb plate 20 nos. copper pipe junction / liquid line 20 nos. water cooler 1 nos....

Due Date : January 16, 2023

Tender Value : ₹ Ref. Documents

View Tender
41
National institute of criminology and forensic science - Delhi

35633446 tender for providing and laying fire appliances with accessories supplying, installation, testing & commissioning of intelligent analog convetional photothermal detector complete with mounting base complete as required. 3 supplying, installation, testing & commissioning of convetional smoke detector with builtin led and mounting base complete with all connections etc. as required 4 supplying, installation, testing & commissioning of manual call boxes of ms construction in surface / recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. 5 supplying, installing, testing & commissioning of main control and indicating panel made out of 16 swg ms sheet to accommodate the following items duly powder coated in approved color with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm, and public address system, monitoring system including connections, interconnections, etc complete as required.12 zone panel for fire alarm system.250watt amplifier racks suitable for operation on 230v ac / 24v dc supply conforming to iec 268 3 complete with all accessories as required 2 nos ( one to act as standby ) talk bake master station with led ptt ( press to talk ) push button for operation on 230v ac / 24 v dc supply conforming to iec 268 for simplex mode of operation / communication suitable for 2 nos. talk back unit 1 set. announcement control desk sutable for selection of different zones selectively and on all call switch with visual indication etc. complete as required 1 set. amplifier change over switch for inter changing amplifier 1 no. monitor panel for loudspeaker complete without put selector, on / off switch, fuse, visual indications, etc. complete as required 1 no.monitor panel for loudspeaker complete without put selector, on / off switch, fuse, visual indications etc. complete as required 1 no. gooseneck microphone with stand and on / off switch 1 no.main on / off switch, fuse, indication lamps, dc and ac voltmeters & ammeter, terminal blocks etc. complete as required 1 set. battery charger trickle cum boost to talk complete load of fire alarm & pa system complete with all accessories including providing & fixing of 2 nos.12 volt, 60 ah each sealed maintenance free batteries 1 set. 6 supplying, installation, testing & commissioning of convetional strobe complete as required. 7 supplying, installation, testing & commissioning of 1.5 / 3 / 6w ceiling speaker complete as required. 8 supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600 / 1000v rated with annealed copper conductor having xlpe insulation, steel wire armouring & frls outer sheath complete as required....

Due Date : January 17, 2023

Tender Value : ₹ Ref. Documents

View Tender
42
Irrigation And Flood Control Department - Delhi

35468198 repair and renovation of office cum store of ifc deptt., at gopalpur delhi 1 taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : of area 3 sq. metres and below 2 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge.in cement mortar 3 dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm 4 dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 5 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer in charge.nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 6 earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by engineer in charge:all kinds of soil 7 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 8 earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil. 9 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level :1:4:8 (1 cement : 4 coarse sand (zone iii) : 8 graded stone aggregate 40 mm nominal size) 10 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in:cement mortar 1:4 (1 cement : 4 coarse sand) 11 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in :cement mortar 1:4 (1 cement : 4 coarse sand) 12 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) 13 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) 14 providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of r.m.c. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per is : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the engineer in charge.” all works up to plinth level : m 10 grade plain cement concrete (cement content considered @ 220 kg/cum) note : excess/less cement used than specified in this item is payable/ recoverable separately. 15 providing and laying c.c. pavement of mix m 25 with ready mixed concrete from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of engineer in charge. (the panel shuttering work shall be paid for separately). (note: cement content considered in this item is @ 330 kg/cum. excess/less cement used as per design mix is payable/ recoverable separately). 16 finishing walls with water proofing cement paint of required shade : old work (one or more coats @ 2.20 kg/10 sqm) complete. 17 finishing walls with water proofing cement paint of required shade :new work (two or more coats applied @ 3.84 kg/10 sqm) 18 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : one or more coats on old work 19 steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 20 providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron y shaped placed 2.4 m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer in charge, with reinforced barbed tape(r.b.t.) / spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of m.s. angle, c.c. blocks shall be paid separately) 21 providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete. fixed to steel windows by welding 22 providing and fixing factory made p.v.c. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid pvc foam sheet, mitred at corners and joined with 2 nos of 150 mm long brackets of 15x15 mm m.s. square tube, the vertical door frame profiles to be reinforced with 19x19 mm m.s. square tube of 19 gauge, epdm rubber gasket weather seal to be provided through out the frame. the door frame to be fixed to the wall using m.s. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of engineerin charge. 23 providing and fixing factory made panel pvc door shutter consisting of frame made out of m.s. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. m.s. frame shall have a coat of steel primers of approved make and manufacture. m.s. frame covered with 5 mm thick heat moulded pvc c channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide pvc sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide pvc sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. top, bottom and lock rails shall be provided both side of the panel. 10 mm (5mm x 2 ) thick, 20 mm wide cross pvc sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side pvc sheet to be fitted in the m.s. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide pvc sheet beading on inner side, and joined together with solvent cement adhesive. an additional 5 mm thick pvc strip of 20 mm width is to be stuck on the interior side of the c channel using pvc solvent adhesive etc. complete as per direction of engineer in charge, manufacturers specification & drawing. 24 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 110 mm diameter 25 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : w.c. pan with isi marked white solid plastic seat and lid 26 providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and c.p. brass spreaders with brass unions and g.i clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :range of two urinal basins with 5 litre white p.v.c. automatic flushing cistern 27 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:white vitreous china wash basin size 630x450 mm with a single 15 mm c.p. brass pillar tap 28 providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete.semi rigid pipe 32 mm dia 29 providing and fixing 100 mm sand cast iron grating for gully trap. 30 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. 31 providing and fixing toilet paper holder :c.p. brass 32 providing and fixing ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 33 providing and fixing brass bib cock of approved quality :20 mm nominal bore 34 providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) :25 mm nominal bore 35 providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) :32 mm nominal bore. 36 providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) :40 mm nominal bore 37 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 15mm nominal bore 38 providing and fixing c.p. brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of engineer in charge. 39 providing and fixing uplasticised pvc connection pipe with brass unions : 45 cm length 15 mm nominal bore 40 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 15 mm nominal outer dia pipes 41 providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 42 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including isi marked stainless steel butt hinges with necessary screws 43 providing and fixing wire gauge shutters using galvanized m.s. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : with isi marked stainless steel butt hinges of required size second class teak wood 44 providing and fixing 1st quality ceramic glazed floor tiles conforming to is : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 45 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 46 providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer in charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin charge. the sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 47 extra for providing and fixing wind ties of 40x 6 mm flat iron section. 48 excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. all kinds of soil 49 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone iii) : 4 graded stone aggregate 20 mm nominal size). 50 steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. hot finished seamless type tubes 51 providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to is : 702 applied hot @ 1.45 kg per square metre of area for each course, second course of roofing felt type 3 grade i (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or peasized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete with : bitumen felt (hessian base) type 3 grade i conforming to is : 1322 52 providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @120 grams/ sqm, both side inclusive) consisting of main t runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross t of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main t at 600 mm center to center to form a grid of 1200x600 mm and secondary cross t of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. main t runners to be suspended from ceiling using gi slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm gi adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main t, bottom exposed width of 24 mm of all t sections shall be pre painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by engineer in charge.12.5 mm thick square edge pvc laminated gypsum tile of size 595x595 mm, made of gypsum plasterboard, manufactured from natural gypsum as per is 2095 part i and laminated with white 0.16mm thick fire retardant pvc film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side pvc film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit 53 dismantling aluminium/ gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by engineer in charge. ...

Due Date : January 03, 2023

Tender Value : ₹ 25.04 Lakhs

View Tender
43
Council Of Scientific And Industrial Research - Delhi

35352262 tender for misc. civil works for various labs, and rooms at npl campus civil work:wall painting with premium acrylic emulsion paint of interior grade, having voc ( volatile organic compound ) content less than 50 grams / litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. two coats 2 removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 3 providing and applying white cement based putty of average thickness 1 mm ( to be applied in two coats ) , of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 4 applying priming coats with primer of approved brand and manufacture, having low voc ( volatile organic compound ) content. with water thinnable cement primer on wall surface having voc content less than 50 grams / litre 5 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : one or more coats on old work 6 white washing with lime to give an even shade : old work ( two or more coats ) 7 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: new work ( two or more coats applied @ 1.43 ltr / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm ) 8 dismantling / removing old pvc flooring in sheet or tiles and cleaning the surface by to removing adhesive including stacking of serviceable material and disposal of unserviceable rubbish maaterial to outside npl campus, including hacking of floor before fixing of tile. 9 providing and laying vitrified tiles in floor with different sizes ( thickness to be specified by the manufacturer ) , with water absorption less than 0.08% and conforming to is:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive ( water based ) conforming to is : 15477, in average 6 mm thickness, including grouting of joints ( payment for grouting of joints to be made separately ) . ( double charged vitrified tiles to be used ) size of tile 600x600 mm 10 providing and laying vitrified tiles in different sizes ( thickness to be specified by the manufacturer ) , with water absorption less than 0.08% and conforming to is: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive ( water based ) conforming to is: 15477, in average 6 mm thickness, including grouting of joints ( payment for grouting of joints to be made separately ) . ( double charged vitrified tiles to be used ) size of tile 600x600 mm 11 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 12 grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade ( 0.10 kg of hardener and 0.20 kg of resin per kg ) , including filling / grouting and finishing complete as per direction of engineer in charge. size of tile 600x600 mm 13 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 14 dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by engineer in charge. 15 providing and fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanising @ 120 grams per sqm including both side ) consisting of main ‘t’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick ( minimum ) sheet, spaced 1200 mm centre to centre, and cross “t” of size 24x28 mm made out of 0.33 mm ( minimum ) sheet, 1200 mm long spaced between main’t’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘t’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick ( minimum ) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls / partitions on a perimeter wall angle pre coated steel of size ( 24x24x3000 mm made of 0.40 mm thick ( minimum ) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 16 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting / making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. main ‘t’ runners to be suspended from ceiling using g.i. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm g.i. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘t’, bottom exposed with 24 mm of all tsections shall be pre painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by engineer in charge. note : only calcium silicate false ceiling area will be measured from wall to wall. no deduction shall be made for exposed frames / opening ( cut outs ) having area less than 0.30 sqm. the calcium silicate ceiling tile shall have nrc value of 0.50 ( minimum ) , light reflection > 85%, non combustible as per b.s. 476 part iv, 100% humidity resistance and also having thermal conductivity <0.043 w / mk. 17 demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge. in cement mortar 18 12 mm cement plaster of mix : 1:4 ( 1 cement: 4 coarse sand ) 19 mirror polishing on marble work / granite work / stone work where ever required to give high gloss finish complete. 20 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, paneling and dash fastenersto be paid for separately ) : for fixed portion powder coated aluminium ( minimum thickness of powder coating 50 micron ) 21 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, paneling and dash fastenersto be paid for separately ) : for shutters of doors, windows & ventilators including providing and fixing hinges / pivots ( heavy weight ss hinges 125x64x2.5mm in case of door shutters and 100x60x2.5mm in case of window shutters ) and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket i.s.i marked required ( fittings shall be paid for separately ) powder coated aluminium ( minimum thickness of powder coating 50 micron ) 22 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge. ( cost of aluminium snap beading shall be paid in basic item ) : with float glass panes of 5 mm thickness ( weight not less than 12.50 kg / sqm ) 23 providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to is: 12823 grade l type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in charge. pre laminated particle board with decorative lamination on both sides 24 providing and fixing brass 100mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete. 25 providing and fixing bright / matt finished stainless steel handles of approved quality & make with necessary screws etc all complete. 125 mm 26 providing and fixing aluminium tower bolts, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm 27 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous china flat back wash basin size 550x 400 mm with single 15 mm c.p. brass pillar tap 28 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 15mm nominal bore 29 providing and fixing chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings this includes jointing of pipes & fittings with one step cpvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge. external work 65 mm nominal dia pipes 30 providing and fixing uplasticised pvc connection pipe with brass unions : 45 cm length 15 mm nominal bore 31 providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. semi rigid pipe 32 mm dia 32 dismantling doors, windows and clerestory windows ( steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : of area 3 sq. metres and below 33 supplying and fixing rolling shutters of approved make, made of required size m.s. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to is: 4454 part 1 and m.s. top cover of required thickness for rolling shutters. 80x1.25 mm m.s. laths with 1.25 mm thick top cover 34 providing and fixing ball bearing for rolling shutters. 35 extra for providing mechanical device chain and crank operation for operating rolling shutters. exceeding 10.00 sqm and upto 16.80 sqm in the area 36 extra for providing grilled rolling shutters manufactured out of 8 mm dia m.s. bar instead of laths as per design approved by engineer in charge, ( area of grill to be measured ) . 37 steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 38 providing & fixing ms welded mesh ( approximate weight 3.30 kg / sqm ) including cutting & welding in position as required ( for payment actual weight will be measured ) . 39 providing and fixing precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm ( + 0.05 % ) total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineer in charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55 mm ) with epdm seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 40 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level : 1:1½:3 ( 1 cement: 1½ coarse sand ( zone iii ) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources ) 41 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 42 providing and fixing aluminium extruded section body tubular type universal hydraulic door closer ( having brand logo with isi, is : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm ) , with double speed adjustment with necessary accessories and screws etc. complete. 43 brick work with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : cement mortar 1:4 ( 1 cement : 4 coarse sand ) 44 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand ( zone iii ) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources ) . 45 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. thermo mechanically treated bars of grade fe 500d or more. 46 centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform 47 providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately ) . second class teak wood 48 providing and fixing isi marked flush door shutters conforming to is : 2202 ( part i ) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including isi marked stainless steel butt hinges with necessary screws 49 extra for cutting rebate in flush door shutters ( total area of the shutter to be measured ) . 50 applying priming coats with primer of approved brand and manufacture, having low voc ( volatile organic compound ) content. with ready mixed pink or grey primer on wood work ( hard and soft wood ) having voc content less than 50 grams / litre 51 providing and fixing bright finished brass 100 mm mortice latch and lock, isi marked, with six levers and a pair of anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) aluminium lever handles of approved quality with necessary screws etc. complete. 52 dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 53 brick work with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 ( 1 cement : 6 coarse sand ) 54 supplying and filling in plinth withsand under floors, including watering, ramming, consolidating and dressing complete. 55 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level : 1:5:10 ( 1 cement : 5 coarse sand ( zone iii ) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources ) 56 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level : 1:2:4 ( 1 cement : 2 coarse sand ( zone iii ) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources ) 57 providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 ( 1cement : 4 coarse sand ) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer in charge. with granite stone of area less than 0.50 sqm. 58 extra for providing granite with sand blasted with leather finish. 59 providing and fixing stainless steel ( grade 304 ) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i / c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. ) . 60 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade old work ( two or more coats applied @ 1.43 ltr / 10 sqm ) over existing cement paint surface 61 earth work in excavation by mechanical means ( hydraulic excavator ) / manual means over areas ( exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan ) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer in charge. all kinds of soil 62 providing and fixing 160mm ( o.d ) 6 kg / cm2 unplasticized rigid pvc pipe ( single socketed pipe for solvent jointing ) , isi marked, confirming to is 4985 : 2000 under ground ( tenching & refilling be paid extra ) or above ground level, including solvent for jointing excluding cost of clamps if required. 63 constructing masonry chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 ( 1 cement : 4 coarse sand ) for sluice valve, with c.i. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and rcc top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) , i / c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand ) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 64 providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand ( zone iii ) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources ) . 65 providing and laying app ( atactic polypropylene polymer ) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre / sqm by the same membrane manufacture of density at 25°c, 0.87 0.89 kg / litre and viscocity 70 160 cps. over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc, and preparing the surface complete. the vital physical and chemical parameters of the membrane shall be as under : joint strength in longitudinal and transverse direction at 23°c as 650 / 450n / 5cm. tear strength in longitudinal and transverse direction as 300 / 250n. softening point of membrane not less than 150°c. cold flexibility shall be upto 2°c when tested in accordance with astm, d 5147. the laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick 66 painting with aluminium paint of approved brand and manufacture to give an even shade. ( bitumen based ) two or more coats on new work 67 ( b ) electrical work:wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc as required. group c 68 supply, installation, testing and commissioning of recessed / surface mounting led flat panel2`x2`, 36 wattwith high efficient leds and glare free opal diffuser including hanging / fixing arrangement complete with all respect . make should be phillips / crompton greaves / halonix / havells. ( the contractor shall provide minimum three year warrantee for led light fittings from manufacturers. security deposite on led light fittings amountsshall be released after satisfactory completion of warrantee period. ) 69 supply, installation, testing and commissioning of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current ( bldc ) motor, class of insulation: b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value ( cm / m / w ) minimum 6.00, air delivery minimum 210 cum / min , 350 rpm ( tolerance as per is : 374 2019 ) , thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c ( max. ) , insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase acsupply, earthing etc. complete as required.fan should be havells / crompton greaves / usha / orient or equivalent make with mentioned technical parameter. 70 providing & fixing m.s. hook in ceiling for ceiling fan. the hook consist of m.s. plate of size 125 mmx125 mm x 5mm welded with suitable m.s. hook. the plate is to be fixed in ceiling with 4 no, carbon steel galvaniged fastner 10x80mm. 71 supplying and fixing extra down rod of 10 cm length g.i. pipe, 15mmdia, heavygaugeincludingpaintingetc.asrequired. ( note : more than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored ) 72 supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc as required. 73 1 or 2 module 74 12 module 75 supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. all the switches, socket etc. should be modular screw type equavalent to north west make should be north west / crabtree / schiender / panasonic vision or equavalent. 76 15 / 16 amp switch 77 6 pin 15 / 16 amp socket outlet 78 telephone socket outlet 79 supply and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 80 supplying and drawing 2 pair 0.5 sq mm fr pvc insulated copper conductor, unarmoured telephone cable in the existing surface / recessed steel / pvc conduit as required. 81 wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed steel conduit as required. ( all the wires / cables should be multistrand, isi marked, fenolex / kei / polycab / havellsmake ) 82 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 83 2 x 4 sq. mm + 1 x 4 sq. mm earth wire 84 4 x 4 sq. mm + 2 x 4 sq. mm earth wire 85 supplying and fixing dp sheet steel enclosure on surface / recess along with 25 / 32amps 240 volts “c” curve dp mcb complete with connections, testing and commissioning etc. as required. ( all the mcbs mccb, mcb db, should be legrand / l&t / schneidermake or equavalent. ) 86 supplying and fixing metal box of following sizes ( nominal size ) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 200 mm x 250 mm x 75 mm deep 87 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) ( all the mcbs mccb, mcb db, should be legrand / l&t / schneidermake or equavalent. ) 4 way, double door spn db 88 supplying and fixing of following ways surface / recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a, tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs ( but without mcbs and incomer ) as required. ( note : vertical type mcb tpdb is normally used where 3 phase outlets are required. ) ( all the mcbs mccb, mcb db, should be legrand / l&t / schneidermake or equavalent. ) 4 way ( 4 + 12 ) , double door 89 providing and fixing 100 a, 16 ka, tp mccb rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. ( all the mcbs mccb, mcb db, should be legrand / l&t / schneidermake only. ) 90 supplying and fixing of following rating, 240 / 415 volts, c series, miniature circuit breaker of following poles in the existing mcb db / mccb in existing cubical panel board including drilling holes in cubical panel making complete with connections, testing and commissioning as required. ( all the mcbs mccb, mcb db, should be legrand / l&t / schneidermake only. ) 91 5 to 32 amp. sp mcb 92 5 to 32 amp. spn mcb 93 5 to 32 amp.triple pole and neutral 94 5 to 32 amp.triple pole and neutral 95 supplying and fixing of following sizes of steel conduit along with accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required 25 mm 96 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface / recess including cutting the wall / making hole in the wall and making good the same in case of recessed conduit as required. 97 25 mm. 98 50 mm. 99 supplying and drawing of utp 4 pair cat 6 lan cable in the existing surface / recessed steel / pvc conduit as required. ( cable should be d link / digi link make only ) ( cable should be marrked by ferrule at both ends ) 100 1 run of cable 101 3 run of cable 102 supply and fixing one no. wall mountingcat 6 i / o connection box punch typeinternet socket with shutter on existing modular box complete in all respect excluding connections as required. ( i / o box should be d link, molex, amp netconnect, panduit, anchor make or equavalent. ( connection will be done by department ) 103 dismentalling and disconnection of old dbs dbs / small panels, switch board, tube, light fitting, fan, cable, wiring, conduit, etc as required as following. 104 tl fitting, switch socket board, db / small panelsetc. 105 wiring, cable and conduit etc. 106 supply of following size ofxlpe insulated, pvc sheathed , aluminum conductor armoured cable of 1.1 kv grade as required. 4 x 35 sq. mm 107 laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. upto 35 sq. mm ( clamped with 1mm thick saddle ) 108 supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 4 x 35 sq. mm ( 28mm ) 109 providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required....

Due Date : January 02, 2023

Tender Value : ₹ 24.20 Lakhs

View Tender
44
National institute of criminology and forensic science - Delhi

35273924 tender for providing and laying fire appliances with accessories supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600 / 1000v rated with annealed copper conductor having xlpe insulation, steel wire armouring & frls outer sheath complete as required. 3 supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. 4 supplying, installation, testing & commissioning of smoke detector with builtin led and mounting base complete with all connections etc. as required 5 supplying, installation, testing & commissioning of manual call boxes of ms construction in surface / recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required 6 supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in m.s. box ( 16 swg ) with hinged cover plate & suitable for operation with amplifier i / c line 7 supplying, installation, testing & commissioning of repeater panel wih 320 character / touch screen lcd display with inbuilt reset, acknowledge and silence switches complete as required 8 supplying, installation, testing & commissioning of addressable strobe complete as required 9 supplying, installation, testing & commissioning of 1.5 / 3 / 6w ceiling speaker complete as required...

Due Date : December 24, 2022

Tender Value : ₹ Ref. Documents

View Tender
45
Shivaji College - Delhi

35191441 tender for civil works earth work in excavation by mechanical means ( hydraulic excavator ) / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan ) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kinds of soil 3 filling available excavated earth ( excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cmin depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 4 excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead within a lead of 50 m : pipes, cables etc, not exceeding 80 mm dia. 5 concrete work 6 1:4:8 ( 1 cement: 4 coarsesand ( zone iii ) : 8 graded stone aggregate 40 mm nominal size ) 7 providing and laying cement concrete in retaining walls, return walls, walls ( any thickness ) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) . 8 reinforced cementconcrete 9 providing and laying in position ready mixed m 25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of r.m.c. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per is : 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the engineer in charge. ( note : cement content considered in this item is @ 330 kg / cum. excess / less cement used as per design mix is payable / recoverable separately ) 10 all works up to plinth level 11 all works above plinth level up to floor v level. 12 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level . thermo mechanically treated bars of grade fe 500 d or more 13 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. thermo mechanically treated bars of grade fe 500 d or more 14 centring and shuttering including strutting, propping etc. and removal of form for all heights: 15 foundations, footings, bases of columns, etc. for mass concrete. 16 lintels, beams, plinth beams, girders, bressumers and cantilevers. 17 columns, pillars, piers, abutments, posts and struts. 18 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead 19 steel work 20 steel work welded in built up section / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in grating, frames, guard bar, railing, brackets, gates and similar works. 21 concentena wire 22 providing and fixing precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm ( + 0.05 % ) total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired ngineerin charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55 mm ) with epdm seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 23 providing and fixing factory made isi marked steel glazed doors, windows and ventilators, side / top / centre hung, with beading and all members such as f7d, f4b, k11 b and k12 b etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenonedand riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, ( sectional weight of only steel members shall be measured for payment ) . fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) 24 providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing t iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of engineer in charge 25 providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams / sqm, both side inclusive ) consisting of main t runner with suitably spaced joints to get required length and of size 24x38 mm made from 26 barbed wire 27 providing and fixing barbed wire on iron post placed atrequired distance emdedded in cement conc. provided with horizontallinesandtwo diagonal interwoven with horizontal wire of barbed wire weighing 9.38kg per100 mtr. ( minimum ) between two posts fitted and fixed with g.i.staples, turn buckelsetc. complete in all respect. payment to be made per metre length of barbed wire used.with g.i. barbed wire 28 brick work 29 brick work with common burnt clayf.p.s. ( non modular ) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:4 ( 1 cement : 4 coarse sand ) 30 brick work with common burnt clayf.p.s. ( non modular ) bricks of class designation 7.5 in super structure above plinth level upto floor v level in all shapes and sizes in: cement mortar 1:4 ( 1 cement: 4 coarse sand ) 31 brick work with non modular fly ash bricks conforming to is:12894, class designation 10 average compressive strength in super structure above plinth level up to floor v level in : cement mortar 1:4 ( 1 cement : 4 coarse sand ) 32 half brick masonry with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 in perstructure above plinth level up to floor v level cement mortar 1:3 ( 1 cement :3 coarse sand 33 finishing 34 12 mm cement plaster of mix: 1:4 ( 1 cement : 4 fine sand ) 35 12 mm cement plaster of mix: 1:6 ( 1 cement : 6 fine sand ) 36 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 ( 1 cement : 6 fine sand ) 37 6 mm cement plaster of mix: 1:3 ( 1 cement : 3 fine sand ) 38 repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineer in charge, , with cement mortar 1:4 ( 1 cement : 4 fine sand ) 39 dismantling work 40 demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge. in cement mortar 41 removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m ( stacks of cleaned bricks shall be measured ) :from brick work in cement mortar 42 demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of engineer in charge ( all grade concrete ) 43 disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer in charge, beyond 50 m initial lead, for all leads including all lifts involved. 44 painting work 45 applying one coat of cement primer of approved brand and manufacture on wall surface. water thinnable cement primer 46 finishing walls with water proofing cement paint of required shade :new work ( two or more coats applied @ 3.84 kg / 10 sqm ) 47 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade , one or more coats on old work 48 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: one or more coats on old work 49 french spirit polish one or more coats on old work. 50 removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering the surface smooth including necessary repairs to scratches etc.complete 51 wall painting with premium acrylic emulsion paint of interior grade having voc ( volatile organic compound ) content less than 50 grams / litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour of two coats 52 finishing walls with acrylic smooth exterior paint of required shade :old work ( two or more coat applied @ 1.67 ltr / 10 sqm ) on existing cement paint surface 53 removingpainting with synthetic enamel paintand like by scrapping , sand papering the surface smooth including necessary repairs to scratches etc.complete 54 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work ( two or more coats ) over and including water thinnable priming coat with cement primer as per direction of site in charge 55 providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 56 distempering with oil bound washable distemper of approved brandand manufacture to give an even shade : two or more coats old works 57 stainless steel 58 providing and fixing stainless steel ( grade 304 ) gate made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete i / c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge. ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. ) 59 providing and fixing stainless steel ( grade 304 ) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete i / c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge. ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. ) 60 plumbingwork 61 providing and fixing g.i. pipes complete with g.i. fittings and clamps, i / c cutting and making good the walls etc., 50 mm dia nominal bore 62 providing and fixing g.i. pipes complete with g.i. fittings and clamps, i / c cutting and making good the walls etc., 40 mm dia nominal bore 63 providing and fixing g.i. pipes complete with g.i. fittings and clamps, i / c cutting and making good the walls etc., 32 mm dia nominal bore 64 providing and fixing g.i. pipes complete with g.i. fittings and clamps, i / c cutting and making good the walls etc., 25 mm dia nominal bore 65 providing and fixing g.i. pipes complete with g.i. fittings and clamps, i / c cutting and making good the walls etc., 20 mm dia nominal bore 66 providing and fixing g.i. pipes complete with g.i. fittings and clamps, i / c cutting and making good the walls etc., 15 mm dia nominal bore 67 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, ( i ) single socketed pipes. 110 mm dia 68 providing and fixing chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe withclamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 69 constructing masonry chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 ( 1 cement : 4 coarse sand ) for sluice valve, with c.i. surface box 100 mm top diameter, 160 mm bottomdiameter and 180 mm deep ( inside ) with chained lid and rcc top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) , i / c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand ) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 70 providing and fixing ball valve ( brass ) of approved quality, high or low pressure, with plastic floats complete 71 15 mm nominal bore 72 20 mm nominal bore 73 25 mm nominal bore 74 providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 : 75 15 mm nominal bore 76 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 a ) 15 mm nominal bore 77 providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 810 gms. 15 mm nominal bore 78 providing and fixing unplasticised p.v.c. connection pipe with ptmt nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length 79 providing and fixing of concealed stop cock jaquar make model no flr 5433n or equeled make model as per approved by site in charge , 80 providing and fixing of concealed stop cock jaquar make model no flr 5441nk or equeled make model as per approved by site in charge 81 making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing g.i. pipe etc. 82 making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 83 sanitary fixtures fittings & installation. 84 providing, installing and testingof jet spray consisting of jet spray, triangular spacer attached with toilet seat hinges, c.p. brass angle stop cock with filter c.p brass flow regulator ( flow 8 lpm ) , c.p. brass wall flange and flexible pipe complete as required complete. make : jaquar / parryware / hindware or equivalent 85 providing and fixing sensor urinal white vitreous china battery based infrared sensor operated urinal of approx. having pre & post flushing with water, having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification, as per complete item direction of engineer in charge. ( make jauqar, hindware, parrryware or equilent ) 86 providing and fixing white vitreous china pedestal type water closet ( european type ) with seat and lid, 10 litre low level white vitreous china flushing cistern & c.p. flush bend with fittings & c.i. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required ( hindaware parryware , jaquar, or approved make ) 87 structural strengthening and retrofitting 88 providing and placing in position micro concrete ( renderoc rg of fosroc or equivalent ) having minimum compressive strength 50 n / mm2........ reinforcement in order to decide on the requirement and addition of reinforcement. ) 25 mm average thickness for slabs 89 providing and placing in position micro concrete ( renderoc rg of fosroc or equivalent ) having minimum compressive strength 50 n / mm2........ reinforcement in order to decide on the requirement and addition of reinforcement. ) 50 mm average thickness for beams 90 providing and placing in position micro concrete ( renderoc rg of fosroc or equivalent ) having minimum compressive strength 50 n / mm2........ reinforcement in order to decide on the requirement and addition of reinforcement. ) 60 mm average thickness for columns 91 introducing new reinforcement bars for structural connections in rcc beams 92 for 10mm dia bar ( dia of hole 12mm and depth of hole 100 mm ) 93 for 16mm dia bar ( dia of hole 18mm and depth of hole 160 mm ) 94 for 20mm dia bar ( dia of hole 24mm and depth of hole 200 mm ) 95 providing and fixing 12mm dia galvanized iron injection nipples…..complete as per direction of engineer in charge. 96 making groove of size 12 mm x 12 mm along the crack line and ......making the crack dust free by blowing compressed air and washing with water. 97 injecting cement slurry 1:3 ( 1 cement: 3 water ) by weight....... as per direction of engineer in charge. ( fixing of gi nipples sall be paid for seperately ) 98 providing, mixing and applying the epoxy bonding ......the rate of application shall be as per manufacturers recommendations. ) 99 providing and fixing hard drawn steel wire fabric of size 50mmx 50mm , ..... complete as per direction of engineer in charge. 100 guniting with cement and coarse sand mortar in 1:3 ratio ejected under a pressure of 2 to 3 kg / sqcm from a cement gun on rcc / brick masonary / stone masonary after removing plaster on rcc work / brick masonary / stone masonary , rcc surface shall be roughened by hacking about 6 mm deepat a close interval not greater than 10 mm c / c ( average ) including opening all cracks up to maximum possible depth in v form, including removing / cleaning of all loose surface, losse deteriorated concrete.in case of masonary work , joints shall be raked to a depth of 10 mm for brick masonary and 20 mm for stone masonary.all corroded reinforcement shall be cleaned properly to remove all the scales and rust by wire brush and by rubbing with emery papers and a coat ofzinc primershall be appliedas per manufacture specifications to the reinforcementafter cleaning. epoxy bonding agent ( nitobond ep of fosroc or equivalent ) shall be applied to suitably prepared old concrete surface as per manufacture specifications and guniting shall be done as soon as possible with in the open time of epoxy bonding agent: 101 as a cement plaster 30mm 50mm for walls, columns, and balconies etc. 102 as a cement plaster 25mm 30mm for soffits of slabs and beamsetc. 103 ( dekguard standard of fosroc or equivalent ) 104 applying two coats of anti carbonation coating ( dekguard standard of fosroc or equivalent ) by spraying on rcc exposed surfaceof minimum wft of 100 micron per coatand second coat at right angle to first coat when first coat will become dry over primed surface . the total dry film thickness of two coats shall be not less than 100 microns and shall be capable of providing good carbon dioxide diffusion resistance. the permeability shall be nil when tested at 24 hours as per bs 1881. one coat ofprimer ( dekguard standard primer of fosroc or equivalent ) shall be applied on prepared rcc exposedsurface by spraying and allowed to cure for a minimum of 2 hours @ 20°c or 1 hour @ 35°c before first coat of anti cabonationcoating.the surface shall be prepared by cleaning the contamination like oil, grease & treatment of algae etc. and filling of blowholes by filling suitable cementitious acrylicputty ( renderoc fc of fosroc or equivalent ) . price includes all operationi.e. primer coat & two coat of anti carbonation coating , preparation of surface & filling of blowholes by cementitious acrylicputty, all material and labour etc. 105 aluminium work 106 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm ubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, paneling and dash fasteners to be paid for separately ) : anodised aluminium ( anodised transparent or dyed to required shade according to is:1868, minimum anodic coating of grade ac 15 ) 107 for shutters of doors, windows & ventilators includingproviding and fixing hinges / pivots and making provisionfor fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required ( fittings shall be paid for separately ) powder coated aluminium ( minimum thicknessof powder coating 50 micron ) 108 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasketetc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) : with float glass panes of 5.50 mm thickness 109 providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with ss screws etc .complete as per direction of engineer in charge powder coated minimum thickness 50 micron aluminium tubular handle bar 110 providing andfixing aluminium round shape handle of outer dia 100 mm with ss screws etc. compleanodized ( ac 15 ) aluminiumte as per direction of engineer incharge 111 providing and fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ) , with necessary accessories and screws etc. complete 112 providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to is : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece m.s. sheet outer box with slide plate etc. complete as per the direction of engineer in charge. with stainless steel cover plate minimum 1.25 mmthickness 113 providing and fixing stainless steel ( ss 304 grade ) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of engineerin charge complete. 355 x 19 mm 114 providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with ss screws etc .complete as per direction of engineer in charge powder coated minimum thickness 50 micron aluminium tubular handle bar 115 providing and fixing of hpl ( high pressure laminates ) with booth side decorative look approved color and shade make marino / century / royal touch / decorative lam etc as per approved by site in charge, 116 stone & tiles work 117 kota stone slab flooring over 20 mm ( average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand ) 118 kota stone slabs 20 mm thick in risers of steps, skirting, dado andpillars laid on 12 mm ( average ) thick cement mortar 1:3 ( 1 cement: 3coarse sand ) and jointed with grey cement slurry mixed with pigment tomatch the shade of the slabs, including rubbing and polishing complete, 119 providing and laying vitrified floor tiles in different sizes ( thickness to bespecified by the manufacturer ) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3kg / sqm including grouting the joints with white cement and matching pigments etc., complete. 120 providing and laying ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by themanufacturer ) , of 1st quality conforming to is : 15622, of approved make, in all colours, shades, except white, ivory, grey, fume red brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3kg / sqm including pointing the joints with white cement and matchingpigments etc., complete 121 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 122 providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand ) , joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. granite of any colour and shade : area of slab over 0.50 sqm 123 providing and laying 60mm thick faciory made cement concrete interlocking paver block of m 30 grade made by block making machine with strong vibratory paction, of approved s;ze, design & shape, laid in required olour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer in charge 124 cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate ) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 125 providing and laying tactile tile ( for vision impaired persons as per standards ) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to is:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cementmortar 1:4 ( 1 cement : 4 coarse sand ) in all shapes & patterns 126 other works 127 providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs balconies, terraces etc consisting of following operations applying a slurry coat of neat cement using 2.75 kg / sqm of 128 light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections galvanising@ 120 grams per sqm including both side ) consisting of main ‘t’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick ( minimum ) sheet, spaced 1200 mm centre to centre, and cross “t” of size 24x28 mm made out of 0.33 mm ( minimum ) sheet, 1200 mm long spaced between main’t’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘t’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick ( minimum ) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls / partitions on a perimeter wall angle pre coated steel of ( 24x24x3000 mm made of 0.40 mm thick ( minimum ) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting / making opening“for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. main ‘t’ runners to be suspended from ceiling using g.i. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm g.i....

Due Date : December 15, 2022

Tender Value : ₹ Ref. Documents

View Tender
46
Department of Financial Services - Delhi

35072242 bids are invited for security equipments 4 zone control panel microprocessor based technology with inbuilt auto dialer , composite burglar and fire alarm panel microprocessor based technology with inbuilt auto dialer , wired panic switch , wireless panic switch , receiver assembly for remote panic switch , auto dialer 30 line , magnetic door sensor 4 wires heavy duty , high density external hooters branded , low density internal hooters branded , pir sensor , battery 12 volts 7 ah , 0.5mm 2 core copper wire isi mark in pvc conduit pipe casing patti , other taxes and chagres , installation of bas , amc comprehensive rates after 1 year warranty period bas , amc comprehensive rates of existing burglar alarm , agni make 2 zone control panel microprocessor based technology with inbuilt auto dialer , agni make 4 zone control panel microprocessor based technology with inbuilt auto dialer , ionization optical type smoke detector with imported mounting base , heat sensor agni or apollo or system sensor , high density heavy duty branded hooters , manual call points break glass switch branded , response indicators branded , 2x1.5mm armoured cable isi mark , other taxes or chagres , installation of fas , amc comprehensive rates after 1 year warranty period fas , amc comprehensive rates of existing fire alarm of mixed makes , nvr 16 channel 4 sata , nvr 8 channel 4 sata , dome camera 2 mp, hd, ip, ir , bullet camera 2 mp, hd, ip, ir , 32 inch led colour monitor complete with wall mount , hdd 4 tb storage , hdd 2 tb storage , cat 6 cable , rj45 connector , poe switch 8 channel , poe switch 16 channel , poe switch 4 channel , pvc conduit pipe isi mark , wireless mouse , rack 6 u with all accessories , hdmi cable , installation charges for cctv system complete , amc comprehensive rates after 1 year warranty period cctv , amc comprehensive rates of existing cctv system of mixed makes empanelment of agencies for supply and installation of total quantity : 514...

Due Date : December 12, 2022

Tender Value : ₹ Ref. Documents

View Tender
47
Ministry Of Environment And Forests and Climate Change - Delhi

34969793 bids are invited for edward make smoke detector model siga oshd , edward make standard base for mounting of detectors model siga sb , edward make mcp model siga 278 , edward make relay module , edward make response indicator , edward make short circuit protection isolator mdoel siga ib , edward make dual loop card indicator model 3 sddc commissioning charges , 24vdc power supply ul fm listed , edward blank rail module cards, filter plates 3 lrmf 3 fp , finolex or rr kable or polycab or kei make frls cable...

Due Date : December 14, 2022

Tender Value : ₹ 6 Lakhs

View Tender
48
Military Engineer Services - Delhi

34895802 tender for repair / maintenance and replacement of dg sets, amf panel and connected e / m misc items and repair / maint of fire alarm system, smoke detectors and connected works at various otm map accn at camero area under ge af subroto park...

Due Date : December 15, 2022

Tender Value : ₹ 26 Lakhs

View Tender
49
Military Engineer Services - Delhi

34882632 repair / replacement of fire alarm system, heat / repair / replacement of fire alarm system, heat / smoke detectors and connected work at various otm accn at wac under ge ( af ) subroto park...

Due Date : December 14, 2022

Tender Value : ₹ 18 Lakhs

View Tender
50
Ministry Of Urban Development - Delhi

34729737 bids are invited for loop expender module pt. no. lem 320 (q3) , addressable photoelectric smoke detector (q3) , hooter cum strobe make notifier (q3) , loop control module pt. no. lcm 320 (q3) total quantity : 523...

Due Date : December 07, 2022

Tender Value : ₹ Ref. Documents

View Tender